The PARIS Forums


Home » The PARIS Forums » PARIS: Main » EDS-D2 AES/EBU MEC (Released ???)
icon5.gif  EDS-D2 AES/EBU MEC [message #108513] Fri, 16 January 2015 10:24 Go to next message
danielcornelius is currently offline  danielcornelius   GERMANY
Messages: 171
Registered: May 2012
Senior Member
Was this Expansion Card released EDS-D2 AES/EBU MEC anytime ???

Did find it in this article :
https://www.rapmag.com/index.php/archives/1990s/341-98/nov98 /1750-test-drive-ensoniq-paris-professional-audio-recording- integrated-system

You can read that in last paragraph of the Link :

Some of the items on the options menu include the ADI ADAT Optical Digital Interface with ADAT Sync ($499) which features full ADAT compatibility and includes two ADAT multi-channel fiber optic connectors, (8 channels IN and 8 channels OUT), plus a single 9-pin D-type synchronization connector. The EDS-ADI allows sample-synchronous digital transfers of up to 8 channels of audio data to and from a chain of up to 16 ADATs. The EDS-D2 AES/EBU MEC Module (target release, December 1998) offers 2 XLR connectors capable of sending or receiving up to four channels of AES/EBU digital audio to or from PARIS. Patching and signal routing to and from the EDS-D2 is accomplished from the Patch Bay Window. An optional sample rate converter is available allowing two of the four channels to apply sample rate conversion to the digital audio.

Anotherone you will find here :

http://web.archive.org/web/19970717151823/http://www.paris.e nsoniq.com/html/specs.htm

MEC expansion modules

EDS D2 2-channel AES/EBU (XLR) and S/PDIF (RCA) Digital I/O
EDS A8i 8 analog inputs with quarter inch TRS connectors
EDS A4i 4 analog inputs with combination XLR and 1/4" TRS connectors
EDS A4o 4 analog outputs with XLR and 1/4" TRS connectors
EDS STC SMPTE time code synchronization
EDS ADI Eight channel ADAT optical digital interface
EDS TDI Eight channel Tascam TDIF digital interface





----------------------------
- Asio Driver Cubase 5LE,Cubase 12
- Asus Z97-C, LGA 1150
- Intel i5 2320
- 32GB RAM
- 4x Seagate Barracuda 750GB
- Win10 64 bit

[Updated on: Sat, 17 January 2015 06:36]

Report message to a moderator

Re: EDS-D2 AES/EBU MEC [message #108514 is a reply to message #108513] Sun, 18 January 2015 11:26 Go to previous messageGo to next message
excelav is currently offline  excelav   UNITED STATES
Messages: 2130
Registered: July 2005
Location: Metro Detroit
Senior Member
Like many things that were planned for Paris, I do not believe it really made it to the market. There may be some floating around out there, I have seen odd things show up on ebay. Many years ago Doug Joyce did have an AES/EBU box made and was going to sell them, but his source dried up. Doug Wellington may still be considering building hardware for Paris, but I'm not sure about an AES/EBU box.

James

[Updated on: Sun, 18 January 2015 11:30]

Report message to a moderator

Re: EDS-D2 AES/EBU MEC [message #108515 is a reply to message #108514] Mon, 19 January 2015 11:49 Go to previous messageGo to next message
danielcornelius is currently offline  danielcornelius   GERMANY
Messages: 171
Registered: May 2012
Senior Member
Hi James,

thx for fast replay !

Thats really interistning. I wonder myself ,has god Dough old circuitplans from MEC, to build own Hardware ?

Greatings
Dan


----------------------------
- Asio Driver Cubase 5LE,Cubase 12
- Asus Z97-C, LGA 1150
- Intel i5 2320
- 32GB RAM
- 4x Seagate Barracuda 750GB
- Win10 64 bit
Re: EDS-D2 AES/EBU MEC [message #108516 is a reply to message #108515] Mon, 19 January 2015 13:24 Go to previous messageGo to next message
excelav is currently offline  excelav   UNITED STATES
Messages: 2130
Registered: July 2005
Location: Metro Detroit
Senior Member
I don't know, you could try contacting both Dougs to see what they have, but I don't believe it is going to go any where. Everybody gets excited about new hardware for Paris when the subject comes up, but it never happens. The numbers for such a project are just not there. As for Doug Joyce, he sold off his Paris systems years ago. You would have to contact him to see if he still has schematics for the AES box, who knows.

James
Re: EDS-D2 AES/EBU MEC [message #108526 is a reply to message #108513] Tue, 03 February 2015 12:35 Go to previous messageGo to next message
Doug Wellington is currently offline  Doug Wellington   UNITED STATES
Messages: 251
Registered: June 2005
Location: Tucson, AZ, USA
Senior Member
Hiya everybody!

So, I'm lying around the house for the next few weeks, got a TKA (total knee arthroplasty) done a few days back. (Some people will do anything to get a few days off of work, eh?)

I don't actually have schematics for any of the PARIS hardware, but I've managed to collect quite a bit of information over the years. Given enough time, I'm sure we could make up an AES/EBU module.

Regards,
Doug


Re: EDS-D2 AES/EBU MEC [message #108530 is a reply to message #108526] Wed, 04 February 2015 10:22 Go to previous messageGo to next message
danielcornelius is currently offline  danielcornelius   GERMANY
Messages: 171
Registered: May 2012
Senior Member
Hi Doug,

can you share some of the information with us ?
So i try to get more know how about the Pins into Mec.
So i like to figure out a S/Pdif Board too.

Because i like to connect and manage the S/PDIF by Paris Hardware.

Do you mean that is possible to release ?

Best regards !
Dan


----------------------------
- Asio Driver Cubase 5LE,Cubase 12
- Asus Z97-C, LGA 1150
- Intel i5 2320
- 32GB RAM
- 4x Seagate Barracuda 750GB
- Win10 64 bit

[Updated on: Wed, 04 February 2015 11:10]

Report message to a moderator

Re: EDS-D2 AES/EBU MEC [message #108531 is a reply to message #108530] Wed, 04 February 2015 11:35 Go to previous messageGo to next message
Doug Wellington is currently offline  Doug Wellington   UNITED STATES
Messages: 251
Registered: June 2005
Location: Tucson, AZ, USA
Senior Member
I'll be happy to share what I have. The hardest part for me is finding everything. Most of my work was done on my old MAC G3 tower, but I haven't booted it in a long time. I'll have to find all the pieces and get it going again. Some of my work was with a Macbook, but the battery expanded and bent the entire chassis of that poor thing.

I've also been told that there are a lot of bad links on my web site, so it seems I've got a bunch of stuff to do. Stay tuned...

Regards,
Doug


Re: EDS-D2 AES/EBU MEC [message #108534 is a reply to message #108531] Thu, 05 February 2015 12:56 Go to previous message
danielcornelius is currently offline  danielcornelius   GERMANY
Messages: 171
Registered: May 2012
Senior Member
I am glad to read that !
Hope everything will work fine fast, without a lot of wasting hours.

In Germany we would say ( Ruhrarea ),
das wird schon werden Wink Laughing
( it will be )....

Best regards ( Beste Grüße ... )
Dan


----------------------------
- Asio Driver Cubase 5LE,Cubase 12
- Asus Z97-C, LGA 1150
- Intel i5 2320
- 32GB RAM
- 4x Seagate Barracuda 750GB
- Win10 64 bit
Previous Topic: Pace Free Paris 3.0
Next Topic: so what are things worth now
Goto Forum:
  


Current Time: Fri Dec 27 10:12:16 PST 2024

Total time taken to generate the page: 0.00998 seconds