Home » The PARIS Forums » PARIS: Main » Paris 3.0/XP MECs and 442s work nicely or no? Also Elco pin out. . .
|
|
| Re: Paris 3.0/XP MECs and 442s work nicely or no? Also Elco pin out. . . [message #84347 is a reply to message #84346] |
Fri, 11 May 2007 18:11   |
Rod Lincoln
Messages: 883
Registered: September 2005
|
Senior Member |
|
|
I've got 2 mecs and a 442 working here, no problems at all.
I'm also clocking with the old Lucid genX word clock. 5 modules in one mec,
4 modules in the other. 1 adat card each. 6 eds cards, 3 UAD cards, all in
a magma. Oh yeah, a Lynx one in the computer also.
Rod
"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>I'll be buying either two MECs or two 442s but don't want it
>to mess my whole rig up if the 442s don't play nice.
>I am using an older Lucid clock now with 2 Mecs already.
>They each have five modules in them. The others may
>see a single ADAT at most someday maybe.
>
>I can make the MECs fit in the machine room with the others
>but the 442s would be a lot easier.
>
>Anyone know Deej?
>
>Also I have to find the pin config for a 56 pin EDAC/ELCO ADAT
>connector. I want to chop this bad boy off and solder 16 TRS
>to it. Anyone know whether the ADAT wiring is different than
>standard?
>Thanks,
>Tom
>
>
>
>
>I choose Polesoft Lockspam to fight spam, and you?
>http://www.polesoft.com/refer.html
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3DContent-Type content=3D"text/html; =
>charset=3Diso-8859-1">
><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D#ffffff>
><DIV><FONT face=3DArial size=3D2>I'll be buying either two MECs or two =
>442s but=20
>don't want it</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>to mess my whole rig up if the 442s =
>don't play=20
>nice.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>I am using an older Lucid clock now =
>with 2 Mecs=20
>already.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>They each have five modules in =
>them. The=20
>others may</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>see a single ADAT at most someday=20
>maybe.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><DIV><FONT face=3DArial size=3D2>I can make the MECs fit in the machine
=
>room with=20
>the others</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>but the 442s would be </FONT><FONT =
>face=3DArial=20
>size=3D2>a lot easier.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><DIV><FONT face=3DArial size=3D2>Anyone know Deej?</FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><DIV><FONT face=3DArial size=3D2>Also I have to find the pin config for
=
>a 56 pin=20
>EDAC/ELCO ADAT</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>connector. I want to chop this =
>bad boy off=20
>and solder 16 TRS</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>to it. Anyone know whether the =
>ADAT wiring is=20
>different than</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>standard?</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Thanks,</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
>and=20
>you?<BR><A=20
>href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
>.html</A> </FONT></DIV></BODY></HTML>
>
>
|
|
|
|
| Re: Paris 3.0/XP MECs and 442s work nicely or no? Also Elco pin out. . . [message #84350 is a reply to message #84347] |
Fri, 11 May 2007 19:13 |
Tom Bruhl
Messages: 1368
Registered: June 2007
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_0008_01C79419.8CA782F0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hey Rod,
That sounds promising. What cards do you have the
Mecs and 442 connected to?
Tom
"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message =
news:46451438$1@linux...
I've got 2 mecs and a 442 working here, no problems at all.
I'm also clocking with the old Lucid genX word clock. 5 modules in one =
mec,
4 modules in the other. 1 adat card each. 6 eds cards, 3 UAD cards, =
all in
a magma. Oh yeah, a Lynx one in the computer also.
Rod
"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>I'll be buying either two MECs or two 442s but don't want it
>to mess my whole rig up if the 442s don't play nice.
>I am using an older Lucid clock now with 2 Mecs already.
>They each have five modules in them. The others may
>see a single ADAT at most someday maybe.
>
>I can make the MECs fit in the machine room with the others
>but the 442s would be a lot easier.
>
>Anyone know Deej?
>
>Also I have to find the pin config for a 56 pin EDAC/ELCO ADAT
>connector. I want to chop this bad boy off and solder 16 TRS
>to it. Anyone know whether the ADAT wiring is different than
>standard?
>Thanks,
>Tom
>
>
>
>
>I choose Polesoft Lockspam to fight spam, and you?
>http://www.polesoft.com/refer.html =20
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3D3DContent-Type content=3D3D"text/html; =3D
>charset=3D3Diso-8859-1">
><META content=3D3D"MSHTML 6.00.2800.1400" name=3D3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D3D#ffffff>
><DIV><FONT face=3D3DArial size=3D3D2>I'll be buying either two MECs =
or two =3D
>442s but=3D20
>don't want it</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>to mess my whole rig up if the =
442s =3D
>don't play=3D20
>nice.</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>I am using an older Lucid clock =
now =3D
>with 2 Mecs=3D20
>already.</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>They each have five modules in =
=3D
>them. The=3D20
>others may</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>see a single ADAT at most =
someday=3D20
>maybe.</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
><DIV><FONT face=3D3DArial size=3D3D2>I can make the MECs fit in the =
machine
=3D
>room with=3D20
>the others</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>but the 442s would be =
</FONT><FONT =3D
>face=3D3DArial=3D20
>size=3D3D2>a lot easier.</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
><DIV><FONT face=3D3DArial size=3D3D2>Anyone know Deej?</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
><DIV><FONT face=3D3DArial size=3D3D2>Also I have to find the pin =
config for
=3D
>a 56 pin=3D20
>EDAC/ELCO ADAT</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>connector. I want to chop this =
=3D
>bad boy off=3D20
>and solder 16 TRS</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>to it. Anyone know whether the =
=3D
>ADAT wiring is=3D20
>different than</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>standard?</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>Thanks,</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>Tom</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
><DIV><FONT size=3D3D2><BR><BR>I choose Polesoft Lockspam to fight =
spam, =3D
>and=3D20
>you?<BR><A=3D20
=
>href=3D3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/re=
fer=3D
>.html</A> </FONT></DIV></BODY></HTML>
>
>
------=_NextPart_000_0008_01C79419.8CA782F0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Hey Rod,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>That sounds promising. What cards =
do you have=20
the</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Mecs and 442 connected to?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV> </DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Rod Lincoln" <<A=20
=
href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&g=
t;=20
wrote in message <A=20
=
href=3D"news:46451438$1@linux">news:46451438$1@linux</A>...</DIV><BR>I've=
got 2=20
mecs and a 442 working here, no problems at all.<BR>I'm also clocking =
with the=20
old Lucid genX word clock. 5 modules in one mec,<BR>4 modules in the =
other. 1=20
adat card each. 6 eds cards, 3 UAD cards, all in<BR>a magma. Oh yeah, =
a Lynx=20
one in the computer also.<BR>Rod<BR>"Tom Bruhl" <<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=20
wrote:<BR>><BR>><BR>>I'll be buying either two MECs or two =
442s but=20
don't want it<BR>>to mess my whole rig up if the 442s don't play=20
nice.<BR>>I am using an older Lucid clock now with 2 Mecs=20
already.<BR>>They each have five modules in them. The others=20
may<BR>>see a single ADAT at most someday maybe.<BR>><BR>>I =
can make=20
the MECs fit in the machine room with the others<BR>>but the 442s =
would be=20
a lot easier.<BR>><BR>>Anyone know Deej?<BR>><BR>>Also I =
have to=20
find the pin config for a 56 pin EDAC/ELCO =
ADAT<BR>>connector. I want=20
to chop this bad boy off and solder 16 TRS<BR>>to it. Anyone =
know=20
whether the ADAT wiring is different=20
=
than<BR>>standard?<BR>>Thanks,<BR>>Tom <BR>><BR>><BR>><B=
R>><BR>>I=20
choose Polesoft Lockspam to fight spam, and=20
you?<BR>>http://www.polesoft.com/refer.html =20
<BR>><BR>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0=20
Transitional//EN"><BR>><HTML><HEAD> <BR>><META=20
http-equiv=3D3DContent-Type content=3D3D"text/html;=20
=3D<BR>>charset=3D3Diso-8859-1"><BR>><META =
content=3D3D"MSHTML=20
6.00.2800.1400"=20
=
name=3D3DGENERATOR><BR>><STYLE></STYLE> <BR>></HEA=
D><BR>><BODY=20
bgColor=3D3D#ffffff><BR>><DIV><FONT face=3D3DArial =
size=3D3D2>I'll=20
be buying either two MECs or two =3D<BR>>442s but=3D20<BR>>don't =
want=20
it</FONT></DIV><BR>><DIV><FONT face=3D3DArial=20
size=3D3D2>to mess my whole rig up if the 442s =3D<BR>>don't=20
=
play=3D20<BR>>nice.</FONT></DIV> <BR>><DIV><FON=
T=20
face=3D3DArial size=3D3D2>I am using an older Lucid clock now =
=3D<BR>>with 2=20
=
Mecs=3D20<BR>>already.</FONT></DIV> <BR>><DIV><=
FONT=20
face=3D3DArial size=3D3D2>They each have five modules in =
=3D<BR>>them.=20
The=3D20<BR>>others =
may</FONT></DIV><BR>><DIV><FONT=20
face=3D3DArial size=3D3D2>see a single ADAT at most=20
=
someday=3D20<BR>>maybe.</FONT></DIV> <BR>><DIV><=
;FONT=20
face=3D3DArial size=3D3D2></FONT> =
</DIV><BR>><DIV><FONT=20
face=3D3DArial size=3D3D2>I can make the MECs fit in the=20
machine<BR>=3D<BR>>room with=3D20<BR>>the=20
others</FONT></DIV><BR>><DIV><FONT =
face=3D3DArial=20
size=3D3D2>but the 442s would be </FONT><FONT=20
=3D<BR>>face=3D3DArial=3D20<BR>>size=3D3D2>a lot=20
easier.</FONT></DIV><BR>><DIV><FONT =
face=3D3DArial=20
size=3D3D2></FONT> </DIV><BR>><DIV><FONT =
face=3D3DArial=20
size=3D3D2>Anyone know=20
Deej?</FONT></DIV><BR>><DIV><FONT =
face=3D3DArial=20
size=3D3D2></FONT> </DIV><BR>><DIV><FONT =
face=3D3DArial=20
size=3D3D2>Also I have to find the pin config for<BR>=3D<BR>>a =
56=20
pin=3D20<BR>>EDAC/ELCO=20
ADAT</FONT></DIV><BR>><DIV><FONT =
face=3D3DArial=20
size=3D3D2>connector. I want to chop this =3D<BR>>bad boy =
off=3D20<BR>>and=20
solder 16 TRS</FONT></DIV><BR>><DIV><FONT =
face=3D3DArial=20
size=3D3D2>to it. Anyone know whether the =3D<BR>>ADAT wiring=20
is=3D20<BR>>different=20
than</FONT></DIV><BR>><DIV><FONT =
face=3D3DArial=20
=
size=3D3D2>standard?</FONT></DIV > <BR>><DIV><FO=
NT=20
face=3D3DArial=20
=
size=3D3D2>Thanks,</FONT></DIV&a mp;gt; <BR>><DIV><FONT=
=20
face=3D3DArial=20
size=3D3D2>Tom</FONT></DIV&g t; <BR>><DIV><FONT=20
face=3D3DArial size=3D3D2></FONT> =
</DIV><BR>><DIV><FONT=20
face=3D3DArial size=3D3D2></FONT> =
</DIV><BR>><DIV><FONT=20
size=3D3D2><BR><BR>I choose Polesoft Lockspam to fight =
spam,=20
=
=3D<BR>>and=3D20<BR>>you?<BR><A=3D20 <BR>>href=3D3D"<A=20
=
href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
'>http://www.polesoft.com/refer.html">http://www.polesoft.com/refer</A=
>=3D<BR>>.html</A>=20
=
</FONT></DIV></BODY&g t;</HTML> <BR>><BR>><BR></=
BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_0008_01C79419.8CA782F0--
|
|
|
|
| Re: Paris 3.0/XP MECs and 442s work nicely or no? Also Elco pin out.. . [message #84351 is a reply to message #84350] |
Fri, 11 May 2007 19:47 |
JeffH
Messages: 307
Registered: October 2007
Location: Wamic, OR
|
Senior Member |
|
|
Tom,
Running a 4 card system:
A 442
B 442
C Nada
D Mec with 2 modules
Just cleaned up and reinstalled Paris directly off the root
(C:]ParisPro) a week and a half ago. Ben rock solid on 5 sessions do
far.
JH
Bruhl wrote:
> Hey Rod,
> That sounds promising. What cards do you have the
> Mecs and 442 connected to?
> Tom
>
>
>
> "Rod Lincoln" <rlincoln@nospam.kc.rr.com
> <mailto:rlincoln@nospam.kc.rr.com>> wrote in message
> news:46451438$1@linux...
>
> I've got 2 mecs and a 442 working here, no problems at all.
> I'm also clocking with the old Lucid genX word clock. 5 modules in
> one mec,
> 4 modules in the other. 1 adat card each. 6 eds cards, 3 UAD cards,
> all in
> a magma. Oh yeah, a Lynx one in the computer also.
> Rod
> "Tom Bruhl" <arpegio@comcast.net <mailto:arpegio@comcast.net>> wrote:
> >
> >
> >I'll be buying either two MECs or two 442s but don't want it
> >to mess my whole rig up if the 442s don't play nice.
> >I am using an older Lucid clock now with 2 Mecs already.
> >They each have five modules in them. The others may
> >see a single ADAT at most someday maybe.
> >
> >I can make the MECs fit in the machine room with the others
> >but the 442s would be a lot easier.
> >
> >Anyone know Deej?
> >
> >Also I have to find the pin config for a 56 pin EDAC/ELCO ADAT
> >connector. I want to chop this bad boy off and solder 16 TRS
> >to it. Anyone know whether the ADAT wiring is different than
> >standard?
> >Thanks,
> >Tom
> >
> >
> >
> >
> >I choose Polesoft Lockspam to fight spam, and you?
> >http://www.polesoft.com/refer.html
> >
> ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
> ><HTML><HEAD>
> ><META http-equiv=3DContent-Type content=3D"text/html; =
> >charset=3Diso-8859-1">
> ><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
> ><STYLE></STYLE>
> ></HEAD>
> ><BODY bgColor=3D#ffffff>
> ><DIV><FONT face=3DArial size=3D2>I'll be buying either two MECs or
> two =
> >442s but=20
> >don't want it</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2>to mess my whole rig up if the 442s =
> >don't play=20
> >nice.</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2>I am using an older Lucid clock now =
> >with 2 Mecs=20
> >already.</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2>They each have five modules in =
> >them. The=20
> >others may</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2>see a single ADAT at most someday=20
> >maybe.</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> ><DIV><FONT face=3DArial size=3D2>I can make the MECs fit in the
> machine
> =
> >room with=20
> >the others</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2>but the 442s would be </FONT><FONT =
> >face=3DArial=20
> >size=3D2>a lot easier.</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> ><DIV><FONT face=3DArial size=3D2>Anyone know Deej?</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> ><DIV><FONT face=3DArial size=3D2>Also I have to find the pin
> config for
> =
> >a 56 pin=20
> >EDAC/ELCO ADAT</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2>connector. I want to chop this =
> >bad boy off=20
> >and solder 16 TRS</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2>to it. Anyone know whether the =
> >ADAT wiring is=20
> >different than</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2>standard?</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2>Thanks,</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> ><DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight
> spam, =
> >and=20
> >you?<BR><A=20
> >href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer
> <http://www.polesoft.com/refer.html">http://www.polesoft.com/refer>=
> >.html</A> </FONT></DIV></BODY></HTML>
> >
> >
|
|
|
|
| Re: Paris 3.0/XP MECs and 442s work nicely or no? Also Elco pin out. . . [message #84354 is a reply to message #84351] |
Fri, 11 May 2007 21:03 |
Tom Bruhl
Messages: 1368
Registered: June 2007
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_002C_01C79429.04546C00
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Jeff,
I did that a couple of weeks ago too and it stabilized Paris for sure.
I get crashes booting up Paris still for other reasons but once it's up =
and running=20
it is more stable on the Root C: . Thank you Dimitrios.
Those other changes D. suggested are still in the making for me.
Big stuff there!
I'd rather have a MEC on the A card for the 24 bit SPDIF. Are you
just monitoring 20 bit?
Tom
"Jeff Hoover" <jkhoover@excite.com> wrote in message =
news:46452c27@linux...
Tom,
Running a 4 card system:
A 442
B 442
C Nada
D Mec with 2 modules
Just cleaned up and reinstalled Paris directly off the root=20
(C:]ParisPro) a week and a half ago. Ben rock solid on 5 sessions do=20
far.
JH
Bruhl wrote:
> Hey Rod,
> That sounds promising. What cards do you have the
> Mecs and 442 connected to?
> Tom
> =20
> =20
>=20
> "Rod Lincoln" <rlincoln@nospam.kc.rr.com
> <mailto:rlincoln@nospam.kc.rr.com>> wrote in message
> news:46451438$1@linux...
>=20
> I've got 2 mecs and a 442 working here, no problems at all.
> I'm also clocking with the old Lucid genX word clock. 5 modules =
in
> one mec,
> 4 modules in the other. 1 adat card each. 6 eds cards, 3 UAD =
cards,
> all in
> a magma. Oh yeah, a Lynx one in the computer also.
> Rod
> "Tom Bruhl" <arpegio@comcast.net <mailto:arpegio@comcast.net>> =
wrote:
> >
> >
> >I'll be buying either two MECs or two 442s but don't want it
> >to mess my whole rig up if the 442s don't play nice.
> >I am using an older Lucid clock now with 2 Mecs already.
> >They each have five modules in them. The others may
> >see a single ADAT at most someday maybe.
> >
> >I can make the MECs fit in the machine room with the others
> >but the 442s would be a lot easier.
> >
> >Anyone know Deej?
> >
> >Also I have to find the pin config for a 56 pin EDAC/ELCO ADAT
> >connector. I want to chop this bad boy off and solder 16 TRS
> >to it. Anyone know whether the ADAT wiring is different than
> >standard?
> >Thanks,
> >Tom
> >
> >
> >
> >
> >I choose Polesoft Lockspam to fight spam, and you?
> >http://www.polesoft.com/refer.html =20
> >
> ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
> ><HTML><HEAD>
> ><META http-equiv=3D3DContent-Type content=3D3D"text/html; =3D
> >charset=3D3Diso-8859-1">
> ><META content=3D3D"MSHTML 6.00.2800.1400" name=3D3DGENERATOR>
> ><STYLE></STYLE>
> ></HEAD>
> ><BODY bgColor=3D3D#ffffff>
> ><DIV><FONT face=3D3DArial size=3D3D2>I'll be buying either two =
MECs or
> two =3D
> >442s but=3D20
> >don't want it</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>to mess my whole rig up =
if the 442s =3D
> >don't play=3D20
> >nice.</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>I am using an older Lucid =
clock now =3D
> >with 2 Mecs=3D20
> >already.</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>They each have five =
modules in =3D
> >them. The=3D20
> >others may</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>see a single ADAT at most =
someday=3D20
> >maybe.</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>I can make the MECs fit =
in the
> machine
> =3D
> >room with=3D20
> >the others</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>but the 442s would be =
</FONT><FONT =3D
> >face=3D3DArial=3D20
> >size=3D3D2>a lot easier.</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>Anyone know =
Deej?</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>Also I have to find the =
pin
> config for
> =3D
> >a 56 pin=3D20
> >EDAC/ELCO ADAT</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>connector. I want to chop =
this =3D
> >bad boy off=3D20
> >and solder 16 TRS</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>to it. Anyone know =
whether the =3D
> >ADAT wiring is=3D20
> >different than</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>standard?</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>Thanks,</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>Tom</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> ><DIV><FONT size=3D3D2><BR><BR>I choose Polesoft Lockspam to =
fight
> spam, =3D
> >and=3D20
> >you?<BR><A=3D20
> =
>href=3D3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/re=
fer
> =
<http://www.polesoft.com/refer.html">http://www.polesoft.com/refer>=3D
> >.html</A> </FONT></DIV></BODY></HTML>
> >
> >
------=_NextPart_000_002C_01C79429.04546C00
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Jeff,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I did that a couple of weeks ago too =
and it=20
stabilized Paris for sure.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I get crashes booting up Paris still =
for other=20
reasons but once it's up and running </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>it is more </FONT><FONT face=3DArial =
size=3D2>stable on=20
the Root C: . Thank you Dimitrios.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Those other changes D. suggested are =
still in the=20
making for me.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Big stuff there!</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I'd rather have a MEC on the A card for =
the 24 bit=20
SPDIF. Are you</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>just monitoring 20 bit?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Jeff Hoover" <<A=20
href=3D"mailto:jkhoover@excite.com">jkhoover@excite.com</A>> wrote =
in message=20
<A=20
=
href=3D"news:46452c27@linux">news:46452c27@linux</A>...</DIV>Tom,<BR><BR>=
Running=20
a 4 card system:<BR><BR>A 442<BR>B 442<BR>C Nada<BR>D Mec with 2=20
modules<BR><BR>Just cleaned up and reinstalled Paris directly off the =
root=20
<BR>(C:]ParisPro) a week and a half ago. Ben rock solid on 5 =
sessions do=20
<BR>far.<BR><BR>JH<BR><BR>Bruhl wrote:<BR>> Hey Rod,<BR>> That =
sounds=20
promising. What cards do you have the<BR>> Mecs and 442 =
connected=20
to?<BR>> Tom<BR>> <BR>> <BR>>=20
<BR>> "Rod Lincoln" <<A=20
=
href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A><B=
R>> =20
<<A=20
=
href=3D"mailto:rlincoln@nospam.kc.rr.com">mailto:rlincoln@nospam.kc.rr.co=
m</A>>>=20
wrote in message<BR>> <A=20
href=3D"news:46451438$1@linux">news:46451438$1@linux</A>...<BR>>=20
<BR>> I've got 2 mecs and a 442 working =
here, no=20
problems at all.<BR>> I'm also clocking =
with the=20
old Lucid genX word clock. 5 modules =
in<BR>> one=20
mec,<BR>> 4 modules in the other. 1 adat =
card each.=20
6 eds cards, 3 UAD cards,<BR>> all=20
in<BR>> a magma. Oh yeah, a Lynx one in the =
computer also.<BR>> =20
Rod<BR>> "Tom Bruhl" <<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A> <<A=20
=
href=3D"mailto:arpegio@comcast.net">mailto:arpegio@comcast.net</A>>>=
;=20
wrote:<BR> > =2 0
><BR> > =2 0
><BR>> >I'll be buying either =
two MECs=20
or two 442s but don't want it<BR>> =
>to=20
mess my whole rig up if the 442s don't play=20
nice.<BR>> >I am using an older =
Lucid=20
clock now with 2 Mecs already.<BR>> =
>They=20
each have five modules in them. The others=20
may<BR>> >see a single ADAT at =
most=20
someday maybe.<BR> > =2 0
><BR>> >I can make the MECs fit =
in the=20
machine room with the others<BR>> =
>but the=20
442s would be a lot easier.<BR> > =2 0
><BR>> >Anyone know=20
Deej?<BR> > =2 0
><BR>> >Also I have to find the =
pin=20
config for a 56 pin EDAC/ELCO =
ADAT<BR> > =2 0
>connector. I want to chop this bad boy off and solder 16=20
TRS<BR>> >to it. Anyone know =
whether=20
the ADAT wiring is different =
than<BR> > =2 0
>standard?<BR> > =2 0
>Thanks,<BR> > =2 0
>Tom<BR> > =2 0
><BR> > =2 0
><BR> > =2 0
><BR> > =2 0
><BR>> >I choose Polesoft =
Lockspam to=20
fight spam, and you?<BR> > =2 0
>http://www.polesoft.com/refer.html =20
<BR> > =2 0
><BR>> ><!DOCTYPE HTML =
PUBLIC=20
"-//W3C//DTD HTML 4.0=20
Transitional//EN"><BR> > =2 0
><HTML><HEAD><BR> > =2 0
><META http-equiv=3D3DContent-Type content=3D3D"text/html;=20
=3D<BR> > =2 0
>charset=3D3Diso-8859-1"><BR> > =2 0
><META content=3D3D"MSHTML 6.00.2800.1400"=20
name=3D3DGENERATOR><BR> > =2 0
><STYLE></STYLE><BR> > =2 0
></HEAD><BR>> ><BODY=20
bgColor=3D3D#ffffff><BR> > =2 0
><DIV><FONT face=3D3DArial size=3D3D2>I'll be buying =
either two=20
MECs or<BR>> two=20
=3D<BR>> >442s=20
but=3D20<BR>> >don't want=20
it</FONT></DIV><BR> > =2 0
><DIV><FONT face=3D3DArial size=3D3D2>to mess my whole =
rig up if=20
the 442s =3D<BR>> >don't=20
play=3D20<BR> > =2 0
=
>nice.</FONT></DIV><BR>> =
><DIV><FONT face=3D3DArial size=3D3D2>I am using an =
older Lucid=20
clock now =3D<BR>> >with 2=20
Mecs=3D20<BR> > =2 0
=
>already.</FONT></DIV><BR >> &nbs=
p;=20
><DIV><FONT face=3D3DArial size=3D3D2>They each have =
five modules=20
in =3D<BR>> >them.=20
The=3D20<BR>> >others=20
may</FONT></DIV><BR> > =2 0
><DIV><FONT face=3D3DArial size=3D3D2>see a single ADAT =
at most=20
someday=3D20<BR> > =2 0
=
>maybe.</FONT></DIV><BR>> =
=20
><DIV><FONT face=3D3DArial size=3D3D2></FONT>=20
</DIV><BR>> =
><DIV><FONT=20
face=3D3DArial size=3D3D2>I can make the MECs fit in=20
the<BR>> =
machine<BR>> =20
=3D<BR>> >room=20
with=3D20<BR>> >the=20
others</FONT></DIV><BR> > =2 0
><DIV><FONT face=3D3DArial size=3D3D2>but the 442s =
would be=20
</FONT><FONT =3D<BR> > =2 0
>face=3D3DArial=3D20<BR>> =
>size=3D3D2>a=20
lot =
easier.</FONT></DIV><BR> > =2 0
><DIV><FONT face=3D3DArial size=3D3D2></FONT>=20
</DIV><BR>> =
><DIV><FONT=20
face=3D3DArial size=3D3D2>Anyone know=20
Deej?</FONT></DIV><BR> > =2 0
><DIV><FONT face=3D3DArial size=3D3D2></FONT>=20
</DIV><BR>> =
><DIV><FONT=20
face=3D3DArial size=3D3D2>Also I have to find the=20
pin<BR>> config =
for<BR>> =20
=3D<BR>> >a 56=20
pin=3D20<BR>> >EDAC/ELCO=20
ADAT</FONT></DIV><BR> > =2 0
><DIV><FONT face=3D3DArial size=3D3D2>connector. I want =
to chop=20
this =3D<BR>> >bad boy=20
off=3D20<BR>> >and solder 16=20
TRS</FONT></DIV><BR> > =2 0
><DIV><FONT face=3D3DArial size=3D3D2>to it. Anyone =
know whether=20
the =3D<BR>> >ADAT wiring=20
is=3D20<BR>> >different=20
than</FONT></DIV><BR> > =2 0
><DIV><FONT face=3D3DArial=20
=
size=3D3D2>standard?</FONT></DIV > <BR>>  =
; =20
><DIV><FONT face=3D3DArial=20
=
size=3D3D2>Thanks,</FONT></DIV&a mp;gt; <BR>> &=
nbsp; =20
><DIV><FONT face=3D3DArial=20
=
size=3D3D2>Tom</FONT></DIV&g t; <BR>>  =
; =20
><DIV><FONT face=3D3DArial size=3D3D2></FONT>=20
</DIV><BR>> =
><DIV><FONT=20
face=3D3DArial size=3D3D2></FONT>=20
</DIV><BR>> =
><DIV><FONT=20
size=3D3D2><BR><BR>I choose Polesoft Lockspam to=20
fight<BR>> spam,=20
=3D<BR> > =2 0
>and=3D20<BR> > =2 0
>you?<BR><A=3D20<BR> > =2 0
>href=3D3D"<A=20
=
href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
'>http://www.polesoft.com/refer.html">http://www.polesoft.com/refer</A=
><BR>> =20
<<A=20
=
href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
'>http://www.polesoft.com/refer.html">http://www.polesoft.com/refer</A=
>>=3D<BR> > =2 0
>.html</A>=20
=
</FONT></DIV></BODY&g t;</HTML> <BR>> &n=
bsp; =20
><BR>> =
></BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_002C_01C79429.04546C00--
|
|
|
|
| Re: Paris 3.0/XP MECs and 442s work nicely or no? Also Elco pin out. . . [message #84356 is a reply to message #84350] |
Fri, 11 May 2007 21:15 |
Rod Lincoln
Messages: 883
Registered: September 2005
|
Senior Member |
|
|
Mec 1 on card A, 442 on Card B, Mec 2 on Card F (my last card)
I'm running spdif out of Mec 1 to a DAC 1
Rod
"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>Hey Rod,
>That sounds promising. What cards do you have the
>Mecs and 442 connected to?
>Tom
>
>
> "Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message =
>news:46451438$1@linux...
>
> I've got 2 mecs and a 442 working here, no problems at all.
> I'm also clocking with the old Lucid genX word clock. 5 modules in one
=
>mec,
> 4 modules in the other. 1 adat card each. 6 eds cards, 3 UAD cards, =
>all in
> a magma. Oh yeah, a Lynx one in the computer also.
> Rod
> "Tom Bruhl" <arpegio@comcast.net> wrote:
> >
> >
> >I'll be buying either two MECs or two 442s but don't want it
> >to mess my whole rig up if the 442s don't play nice.
> >I am using an older Lucid clock now with 2 Mecs already.
> >They each have five modules in them. The others may
> >see a single ADAT at most someday maybe.
> >
> >I can make the MECs fit in the machine room with the others
> >but the 442s would be a lot easier.
> >
> >Anyone know Deej?
> >
> >Also I have to find the pin config for a 56 pin EDAC/ELCO ADAT
> >connector. I want to chop this bad boy off and solder 16 TRS
> >to it. Anyone know whether the ADAT wiring is different than
> >standard?
> >Thanks,
> >Tom
> >
> >
> >
> >
> >I choose Polesoft Lockspam to fight spam, and you?
> >http://www.polesoft.com/refer.html =20
> >
> ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
> ><HTML><HEAD>
> ><META http-equiv=3D3DContent-Type content=3D3D"text/html; =3D
> >charset=3D3Diso-8859-1">
> ><META content=3D3D"MSHTML 6.00.2800.1400" name=3D3DGENERATOR>
> ><STYLE></STYLE>
> ></HEAD>
> ><BODY bgColor=3D3D#ffffff>
> ><DIV><FONT face=3D3DArial size=3D3D2>I'll be buying either two MECs =
>or two =3D
> >442s but=3D20
> >don't want it</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>to mess my whole rig up if the =
>442s =3D
> >don't play=3D20
> >nice.</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>I am using an older Lucid clock
=
>now =3D
> >with 2 Mecs=3D20
> >already.</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>They each have five modules in =
>=3D
> >them. The=3D20
> >others may</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>see a single ADAT at most =
>someday=3D20
> >maybe.</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>I can make the MECs fit in the =
>machine
> =3D
> >room with=3D20
> >the others</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>but the 442s would be =
></FONT><FONT =3D
> >face=3D3DArial=3D20
> >size=3D3D2>a lot easier.</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>Anyone know Deej?</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>Also I have to find the pin =
>config for
> =3D
> >a 56 pin=3D20
> >EDAC/ELCO ADAT</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>connector. I want to chop this =
>=3D
> >bad boy off=3D20
> >and solder 16 TRS</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>to it. Anyone know whether the =
>=3D
> >ADAT wiring is=3D20
> >different than</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>standard?</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>Thanks,</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>Tom</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> ><DIV><FONT size=3D3D2><BR><BR>I choose Polesoft Lockspam to fight =
>spam, =3D
> >and=3D20
> >you?<BR><A=3D20
> =
>>href=3D3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/re=
>fer=3D
> >.html</A> </FONT></DIV></BODY></HTML>
> >
> >
>
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3DContent-Type content=3D"text/html; =
>charset=3Diso-8859-1">
><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D#ffffff>
><DIV><FONT face=3DArial size=3D2>Hey Rod,</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>That sounds promising. What cards =
>do you have=20
>the</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Mecs and 442 connected to?</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><DIV> </DIV>
><BLOCKQUOTE=20
>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Rod Lincoln" <<A=20
> =
>href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&g=
>t;=20
> wrote in message <A=20
> =
>href=3D"news:46451438$1@linux">news:46451438$1@linux</A>...</DIV><BR>I've=
> got 2=20
> mecs and a 442 working here, no problems at all.<BR>I'm also clocking
=
>with the=20
> old Lucid genX word clock. 5 modules in one mec,<BR>4 modules in the =
>other. 1=20
> adat card each. 6 eds cards, 3 UAD cards, all in<BR>a magma. Oh yeah,
=
>a Lynx=20
> one in the computer also.<BR>Rod<BR>"Tom Bruhl" <<A=20
> href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=20
> wrote:<BR>><BR>><BR>>I'll be buying either two MECs or two =
>442s but=20
> don't want it<BR>>to mess my whole rig up if the 442s don't play=20
> nice.<BR>>I am using an older Lucid clock now with 2 Mecs=20
> already.<BR>>They each have five modules in them. The others=20
> may<BR>>see a single ADAT at most someday maybe.<BR>><BR>>I =
>can make=20
> the MECs fit in the machine room with the others<BR>>but the 442s =
>would be=20
> a lot easier.<BR>><BR>>Anyone know Deej?<BR>><BR>>Also I =
>have to=20
> find the pin config for a 56 pin EDAC/ELCO =
>ADAT<BR>>connector. I want=20
> to chop this bad boy off and solder 16 TRS<BR>>to it. Anyone =
>know=20
> whether the ADAT wiring is different=20
> =
>than<BR>>standard?<BR>>Thanks,<BR>>Tom<BR>><BR>><BR >><B=
>R>><BR>>I=20
> choose Polesoft Lockspam to fight spam, and=20
> you?<BR>>http://www.polesoft.com/refer.html =20
> <BR>><BR>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0=20
> Transitional//EN"><BR>><HTML><HEAD><BR>><META=20
> http-equiv=3D3DContent-Type content=3D3D"text/html;=20
> =3D<BR>>charset=3D3Diso-8859-1"><BR>><META =
>content=3D3D"MSHTML=20
> 6.00.2800.1400"=20
> =
>name=3D3DGENERATOR><BR>><STYLE></STYLE><BR>></HEA=
>D><BR>><BODY=20
> bgColor=3D3D#ffffff><BR>><DIV><FONT face=3D3DArial =
>size=3D3D2>I'll=20
> be buying either two MECs or two =3D<BR>>442s but=3D20<BR>>don't =
>want=20
> it</FONT></DIV><BR>><DIV><FONT face=3D3DArial=20
> size=3D3D2>to mess my whole rig up if the 442s =3D<BR>>don't=20
> =
>play=3D20<BR>>nice.</FONT></DIV><BR>><DIV><FON=
>T=20
> face=3D3DArial size=3D3D2>I am using an older Lucid clock now =
>=3D<BR>>with 2=20
> =
>Mecs=3D20<BR>>already.</FONT></DIV><BR>><DIV><=
>FONT=20
> face=3D3DArial size=3D3D2>They each have five modules in =
>=3D<BR>>them.=20
> The=3D20<BR>>others =
>may</FONT></DIV><BR>><DIV><FONT=20
> face=3D3DArial size=3D3D2>see a single ADAT at most=20
> =
>someday=3D20<BR>>maybe.</FONT></DIV><BR>><DIV><=
>;FONT=20
> face=3D3DArial size=3D3D2></FONT> =
></DIV><BR>><DIV><FONT=20
> face=3D3DArial size=3D3D2>I can make the MECs fit in the=20
> machine<BR>=3D<BR>>room with=3D20<BR>>the=20
> others</FONT></DIV><BR>><DIV><FONT =
>face=3D3DArial=20
> size=3D3D2>but the 442s would be </FONT><FONT=20
> =3D<BR>>face=3D3DArial=3D20<BR>>size=3D3D2>a lot=20
> easier.</FONT></DIV><BR>><DIV><FONT =
>face=3D3DArial=20
> size=3D3D2></FONT> </DIV><BR>><DIV><FONT =
>face=3D3DArial=20
> size=3D3D2>Anyone know=20
> Deej?</FONT></DIV><BR>><DIV><FONT =
>face=3D3DArial=20
> size=3D3D2></FONT> </DIV><BR>><DIV><FONT =
>face=3D3DArial=20
> size=3D3D2>Also I have to find the pin config for<BR>=3D<BR>>a =
>56=20
> pin=3D20<BR>>EDAC/ELCO=20
> ADAT</FONT></DIV><BR>><DIV><FONT =
>face=3D3DArial=20
> size=3D3D2>connector. I want to chop this =3D<BR>>bad boy =
>off=3D20<BR>>and=20
> solder 16 TRS</FONT></DIV><BR>><DIV><FONT =
>face=3D3DArial=20
> size=3D3D2>to it. Anyone know whether the =3D<BR>>ADAT wiring=20
> is=3D20<BR>>different=20
> than</FONT></DIV><BR>><DIV><FONT =
>face=3D3DArial=20
> =
>size=3D3D2>standard?</FONT></DIV><BR>><DIV><FO=
>NT=20
> face=3D3DArial=20
> =
>size=3D3D2>Thanks,</FONT></DIV><BR>><DIV><FONT=
>=20
> face=3D3DArial=20
> size=3D3D2>Tom</FONT></DIV><BR>><DIV><FONT=20
> face=3D3DArial size=3D3D2></FONT> =
></DIV><BR>><DIV><FONT=20
> face=3D3DArial size=3D3D2></FONT> =
></DIV><BR>><DIV><FONT=20
> size=3D3D2><BR><BR>I choose Polesoft Lockspam to fight =
>spam,=20
> =
>=3D<BR>>and=3D20<BR>>you?<BR><A=3D20<BR>>href=3D3D" <A=20
> =
>href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
>'>http://www.polesoft.com/refer.html">http://www.polesoft.com/refer</A=
>>=3D<BR>>.html</A>=20
> =
></FONT></DIV></BODY></HTML><BR>><BR>><BR></=
>BLOCKQUOTE></BODY></HTML>
>
>
|
|
|
|
| Re: Paris 3.0/XP MECs and 442s work nicely or no? Also Elco pin out. . . [message #84359 is a reply to message #84356] |
Fri, 11 May 2007 21:25 |
Tom Bruhl
Messages: 1368
Registered: June 2007
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_005F_01C7942C.02A5F150
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
What do you guys think,
What are my chances of getting two 442s in the mix
without my Mecs losing some of their cards?
T.
"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message =
news:46453f51$1@linux...
Mec 1 on card A, 442 on Card B, Mec 2 on Card F (my last card)
I'm running spdif out of Mec 1 to a DAC 1
Rod
"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>Hey Rod,
>That sounds promising. What cards do you have the
>Mecs and 442 connected to?
>Tom
>
>
> "Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message =3D
>news:46451438$1@linux...
>
> I've got 2 mecs and a 442 working here, no problems at all.
> I'm also clocking with the old Lucid genX word clock. 5 modules in =
one
=3D
>mec,
> 4 modules in the other. 1 adat card each. 6 eds cards, 3 UAD cards, =
=3D
>all in
> a magma. Oh yeah, a Lynx one in the computer also.
> Rod
> "Tom Bruhl" <arpegio@comcast.net> wrote:
> >
> >
> >I'll be buying either two MECs or two 442s but don't want it
> >to mess my whole rig up if the 442s don't play nice.
> >I am using an older Lucid clock now with 2 Mecs already.
> >They each have five modules in them. The others may
> >see a single ADAT at most someday maybe.
> >
> >I can make the MECs fit in the machine room with the others
> >but the 442s would be a lot easier.
> >
> >Anyone know Deej?
> >
> >Also I have to find the pin config for a 56 pin EDAC/ELCO ADAT
> >connector. I want to chop this bad boy off and solder 16 TRS
> >to it. Anyone know whether the ADAT wiring is different than
> >standard?
> >Thanks,
> >Tom
> >
> >
> >
> >
> >I choose Polesoft Lockspam to fight spam, and you?
> >http://www.polesoft.com/refer.html =3D20
> >
> ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
> ><HTML><HEAD>
> ><META http-equiv=3D3D3DContent-Type content=3D3D3D"text/html; =
=3D3D
> >charset=3D3D3Diso-8859-1">
> ><META content=3D3D3D"MSHTML 6.00.2800.1400" name=3D3D3DGENERATOR>
> ><STYLE></STYLE>
> ></HEAD>
> ><BODY bgColor=3D3D3D#ffffff>
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>I'll be buying either two =
MECs =3D
>or two =3D3D
> >442s but=3D3D20
> >don't want it</FONT></DIV>
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>to mess my whole rig up =
if the =3D
>442s =3D3D
> >don't play=3D3D20
> >nice.</FONT></DIV>
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>I am using an older Lucid =
clock
=3D
>now =3D3D
> >with 2 Mecs=3D3D20
> >already.</FONT></DIV>
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>They each have five =
modules in =3D
>=3D3D
> >them. The=3D3D20
> >others may</FONT></DIV>
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>see a single ADAT at most =
=3D
>someday=3D3D20
> >maybe.</FONT></DIV>
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>I can make the MECs fit =
in the =3D
>machine
> =3D3D
> >room with=3D3D20
> >the others</FONT></DIV>
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>but the 442s would be =3D
></FONT><FONT =3D3D
> >face=3D3D3DArial=3D3D20
> >size=3D3D3D2>a lot easier.</FONT></DIV>
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Anyone know =
Deej?</FONT></DIV>
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Also I have to find the =
pin =3D
>config for
> =3D3D
> >a 56 pin=3D3D20
> >EDAC/ELCO ADAT</FONT></DIV>
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>connector. I want to chop =
this =3D
>=3D3D
> >bad boy off=3D3D20
> >and solder 16 TRS</FONT></DIV>
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>to it. Anyone know =
whether the =3D
>=3D3D
> >ADAT wiring is=3D3D20
> >different than</FONT></DIV>
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>standard?</FONT></DIV>
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Thanks,</FONT></DIV>
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Tom</FONT></DIV>
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
> ><DIV><FONT size=3D3D3D2><BR><BR>I choose Polesoft Lockspam to =
fight =3D
>spam, =3D3D
> >and=3D3D20
> >you?<BR><A=3D3D20
> =3D
=
>>href=3D3D3D"http://www.polesoft.com/refer.html">http://www.polesoft.com=
/re=3D
>fer=3D3D
> >.html</A> </FONT></DIV></BODY></HTML>
> >
> >
>
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3D3DContent-Type content=3D3D"text/html; =3D
>charset=3D3Diso-8859-1">
><META content=3D3D"MSHTML 6.00.2800.1400" name=3D3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D3D#ffffff>
><DIV><FONT face=3D3DArial size=3D3D2>Hey Rod,</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>That sounds promising. What =
cards =3D
>do you have=3D20
>the</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>Mecs and 442 connected =
to?</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>Tom</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
><DIV> </DIV>
><BLOCKQUOTE=3D20
>style=3D3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
=3D
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Rod Lincoln" <<A=3D20
> =3D
=
>href=3D3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A=
>&g=3D
>t;=3D20
> wrote in message <A=3D20
> =3D
=
>href=3D3D"news:46451438$1@linux">news:46451438$1@linux</A>...</DIV><BR>I=
've=3D
> got 2=3D20
> mecs and a 442 working here, no problems at all.<BR>I'm also =
clocking
=3D
>with the=3D20
> old Lucid genX word clock. 5 modules in one mec,<BR>4 modules in =
the =3D
>other. 1=3D20
> adat card each. 6 eds cards, 3 UAD cards, all in<BR>a magma. Oh =
yeah,
=3D
>a Lynx=3D20
> one in the computer also.<BR>Rod<BR>"Tom Bruhl" <<A=3D20
> href=3D3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20
> wrote:<BR>><BR>><BR>>I'll be buying either two MECs or two =3D
>442s but=3D20
> don't want it<BR>>to mess my whole rig up if the 442s don't =
play=3D20
> nice.<BR>>I am using an older Lucid clock now with 2 Mecs=3D20
> already.<BR>>They each have five modules in them. The others=3D20
> may<BR>>see a single ADAT at most someday maybe.<BR>><BR>>I =3D
>can make=3D20
> the MECs fit in the machine room with the others<BR>>but the 442s =
=3D
>would be=3D20
> a lot easier.<BR>><BR>>Anyone know Deej?<BR>><BR>>Also I =3D
>have to=3D20
> find the pin config for a 56 pin EDAC/ELCO =3D
>ADAT<BR>>connector. I want=3D20
> to chop this bad boy off and solder 16 TRS<BR>>to it. Anyone =3D
>know=3D20
> whether the ADAT wiring is different=3D20
> =3D
>than<BR>>standard?<BR>>Thanks,<BR>>Tom<BR>><BR>><BR >><B=3D
>R>><BR>>I=3D20
> choose Polesoft Lockspam to fight spam, and=3D20
> you?<BR>>http://www.polesoft.com/refer.html =3D20
> <BR>><BR>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0=3D20
> Transitional//EN"><BR>><HTML><HEAD><BR>><META=3D20
> http-equiv=3D3D3DContent-Type content=3D3D3D"text/html;=3D20
> =3D3D<BR>>charset=3D3D3Diso-8859-1"><BR>><META =3D
>content=3D3D3D"MSHTML=3D20
> 6.00.2800.1400"=3D20
> =3D
>name=3D3D3DGENERATOR><BR>><STYLE></STYLE><BR>></HEA=3D
>D><BR>><BODY=3D20
> bgColor=3D3D3D#ffffff><BR>><DIV><FONT face=3D3D3DArial =3D
>size=3D3D3D2>I'll=3D20
> be buying either two MECs or two =3D3D<BR>>442s =
but=3D3D20<BR>>don't =3D
>want=3D20
> it</FONT></DIV><BR>><DIV><FONT face=3D3D3DArial=3D20
> size=3D3D3D2>to mess my whole rig up if the 442s =
=3D3D<BR>>don't=3D20
> =3D
>play=3D3D20<BR>>nice.</FONT></DIV><BR>><DIV><FON=3D
>T=3D20
> face=3D3D3DArial size=3D3D3D2>I am using an older Lucid clock now =
=3D
>=3D3D<BR>>with 2=3D20
> =3D
>Mecs=3D3D20<BR>>already.</FONT></DIV><BR>><DIV><=3D
>FONT=3D20
> face=3D3D3DArial size=3D3D3D2>They each have five modules in =3D
>=3D3D<BR>>them.=3D20
> The=3D3D20<BR>>others =3D
>may</FONT></DIV><BR>><DIV><FONT=3D20
> face=3D3D3DArial size=3D3D3D2>see a single ADAT at most=3D20
> =3D
>someday=3D3D20<BR>>maybe.</FONT></DIV><BR>><DIV><=3D
>;FONT=3D20
> face=3D3D3DArial size=3D3D3D2></FONT> =3D
></DIV><BR>><DIV><FONT=3D20
> face=3D3D3DArial size=3D3D3D2>I can make the MECs fit in the=3D20
> machine<BR>=3D3D<BR>>room with=3D3D20<BR>>the=3D20
> others</FONT></DIV><BR>><DIV><FONT =3D
>face=3D3D3DArial=3D20
> size=3D3D3D2>but the 442s would be </FONT><FONT=3D20
> =3D3D<BR>>face=3D3D3DArial=3D3D20<BR>>size=3D3D3D2>a lot=3D20
> easier.</FONT></DIV><BR>><DIV><FONT =3D
>face=3D3D3DArial=3D20
> size=3D3D3D2></FONT> </DIV><BR>><DIV><FONT =3D
>face=3D3D3DArial=3D20
> size=3D3D3D2>Anyone know=3D20
> Deej?</FONT></DIV><BR>><DIV><FONT =3D
>face=3D3D3DArial=3D20
> size=3D3D3D2></FONT> </DIV><BR>><DIV><FONT =3D
>face=3D3D3DArial=3D20
> size=3D3D3D2>Also I have to find the pin config for<BR>=3D3D<BR>>a =
=3D
>56=3D20
> pin=3D3D20<BR>>EDAC/ELCO=3D20
> ADAT</FONT></DIV><BR>><DIV><FONT =3D
>face=3D3D3DArial=3D20
> size=3D3D3D2>connector. I want to chop this =3D3D<BR>>bad boy =3D
>off=3D3D20<BR>>and=3D20
> solder 16 TRS</FONT></DIV><BR>><DIV><FONT =3D
>face=3D3D3DArial=3D20
> size=3D3D3D2>to it. Anyone know whether the =3D3D<BR>>ADAT =
wiring=3D20
> is=3D3D20<BR>>different=3D20
> than</FONT></DIV><BR>><DIV><FONT =3D
>face=3D3D3DArial=3D20
> =3D
>size=3D3D3D2>standard?</FONT></DIV><BR>><DIV><FO=3D
>NT=3D20
> face=3D3D3DArial=3D20
> =3D
>size=3D3D3D2>Thanks,</FONT></DIV><BR>><DIV><FONT=3D
>=3D20
> face=3D3D3DArial=3D20
> size=3D3D3D2>Tom</FONT></DIV><BR>><DIV><FONT=3D20
> face=3D3D3DArial size=3D3D3D2></FONT> =3D
></DIV><BR>><DIV><FONT=3D20
> face=3D3D3DArial size=3D3D3D2></FONT> =3D
></DIV><BR>><DIV><FONT=3D20
> size=3D3D3D2><BR><BR>I choose Polesoft Lockspam to fight =3D
>spam,=3D20
> =3D
>=3D3D<BR>>and=3D3D20<BR>>you?<BR><A=3D3D20<BR>>href=3D3D3D "<A=3D20
> =3D
=
>href=3D3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/re=
fer=3D
=
>'>http://www.polesoft.com/refer.html">http://www.polesoft.com/refer</A=3D=
>>=3D3D<BR>>.html</A>=3D20
> =3D
></FONT></DIV></BODY></HTML><BR>><BR>><BR></=3D
>BLOCKQUOTE></BODY></HTML>
>
>
------=_NextPart_000_005F_01C7942C.02A5F150
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>What do you guys think,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>What are my chances of getting two 442s =
in the=20
mix</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>without my Mecs losing some of=20
their cards?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>T.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Rod Lincoln" <<A=20
=
href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&g=
t;=20
wrote in message <A=20
=
href=3D"news:46453f51$1@linux">news:46453f51$1@linux</A>...</DIV><BR>Mec =
1 on=20
card A, 442 on Card B, Mec 2 on Card F (my last card)<BR>I'm running =
spdif out=20
of Mec 1 to a DAC 1<BR>Rod<BR>"Tom Bruhl" <<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=20
wrote:<BR>><BR>><BR>>Hey Rod,<BR>>That sounds =
promising. =20
What cards do you have the<BR>>Mecs and 442 connected=20
to?<BR>>Tom<BR>><BR>><BR>> "Rod Lincoln" <<A=20
=
href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&g=
t;=20
wrote in message =
=3D<BR>>news:46451438$1@linux...<BR>><BR>> I've=20
got 2 mecs and a 442 working here, no problems at all.<BR>> =
I'm also=20
clocking with the old Lucid genX word clock. 5 modules in=20
one<BR>=3D<BR>>mec,<BR>> 4 modules in the other. 1 adat =
card each. 6=20
eds cards, 3 UAD cards, =3D<BR>>all in<BR>> a magma. Oh =
yeah, a Lynx=20
one in the computer also.<BR>> Rod<BR>> "Tom Bruhl" =
<<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=20
wrote:<BR>> ><BR>> ><BR>> >I'll be =
buying=20
either two MECs or two 442s but don't want it<BR>> >to =
mess my=20
whole rig up if the 442s don't play nice.<BR>> >I am using =
an=20
older Lucid clock now with 2 Mecs already.<BR>> >They each =
have=20
five modules in them. The others may<BR>> >see a =
single ADAT=20
at most someday maybe.<BR>> ><BR>> >I can make =
the=20
MECs fit in the machine room with the others<BR>> >but the =
442s=20
would be a lot easier.<BR>> ><BR>> >Anyone =
know=20
Deej?<BR>> ><BR>> >Also I have to find the pin =
config=20
for a 56 pin EDAC/ELCO ADAT<BR>> >connector. I want =
to chop=20
this bad boy off and solder 16 TRS<BR>> >to it. =
Anyone know=20
whether the ADAT wiring is different than<BR>> =20
>standard?<BR>> >Thanks,<BR>> =
>Tom<BR>> =20
><BR>> ><BR>> ><BR>> =
><BR>> =20
>I choose Polesoft Lockspam to fight spam, and you?<BR>> =20
>http://www.polesoft.com/refer.html =3D20<BR>> =20
><BR>> ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0=20
Transitional//EN"><BR>> =
><HTML><HEAD><BR>> =20
><META http-equiv=3D3D3DContent-Type content=3D3D3D"text/html;=20
=3D3D<BR>> >charset=3D3D3Diso-8859-1"><BR>> =
><META=20
content=3D3D3D"MSHTML 6.00.2800.1400" =
name=3D3D3DGENERATOR><BR>> =20
><STYLE></STYLE><BR>> =
></HEAD><BR>> =20
><BODY bgColor=3D3D3D#ffffff><BR>> =
><DIV><FONT=20
face=3D3D3DArial size=3D3D3D2>I'll be buying either two MECs =
=3D<BR>>or two=20
=3D3D<BR>> >442s but=3D3D20<BR>> >don't want=20
it</FONT></DIV><BR>> ><DIV><FONT=20
face=3D3D3DArial size=3D3D3D2>to mess my whole rig up if the =
=3D<BR>>442s=20
=3D3D<BR>> >don't play=3D3D20<BR>> =20
>nice.</FONT></DIV><BR>> =
><DIV><FONT=20
face=3D3D3DArial size=3D3D3D2>I am using an older Lucid =
clock<BR>=3D<BR>>now=20
=3D3D<BR>> >with 2 Mecs=3D3D20<BR>> =20
>already.</FONT></DIV><BR >> =
><DIV><FONT=20
face=3D3D3DArial size=3D3D3D2>They each have five modules in=20
=3D<BR>>=3D3D<BR>> >them. The=3D3D20<BR>> =
>others=20
may</FONT></DIV><BR>> ><DIV><FONT=20
face=3D3D3DArial size=3D3D3D2>see a single ADAT at most=20
=3D<BR>>someday=3D3D20<BR>> =20
>maybe.</FONT></DIV><BR>> =
><DIV><FONT=20
face=3D3D3DArial size=3D3D3D2></FONT> =
</DIV><BR>> =20
><DIV><FONT face=3D3D3DArial size=3D3D3D2>I can make =
the MECs fit=20
in the =3D<BR>>machine<BR>> =3D3D<BR>> >room=20
with=3D3D20<BR>> >the =
others</FONT></DIV><BR>> =20
><DIV><FONT face=3D3D3DArial size=3D3D3D2>but the 442s =
would be=20
=3D<BR>></FONT><FONT =3D3D<BR>> =20
>face=3D3D3DArial=3D3D20<BR>> >size=3D3D3D2>a lot=20
easier.</FONT></DIV><BR>> ><DIV><FONT =
face=3D3D3DArial size=3D3D3D2></FONT> =
</DIV><BR>> =20
><DIV><FONT face=3D3D3DArial size=3D3D3D2>Anyone know=20
Deej?</FONT></DIV><BR>> ><DIV><FONT=20
face=3D3D3DArial size=3D3D3D2></FONT> =
</DIV><BR>> =20
><DIV><FONT face=3D3D3DArial size=3D3D3D2>Also I have =
to find the=20
pin =3D<BR>>config for<BR>> =3D3D<BR>> >a 56=20
pin=3D3D20<BR>> >EDAC/ELCO=20
ADAT</FONT></DIV><BR>> ><DIV><FONT=20
face=3D3D3DArial size=3D3D3D2>connector. I want to chop this=20
=3D<BR>>=3D3D<BR>> >bad boy off=3D3D20<BR>> =
>and solder=20
16 TRS</FONT></DIV><BR>> ><DIV><FONT=20
face=3D3D3DArial size=3D3D3D2>to it. Anyone know whether the=20
=3D<BR>>=3D3D<BR>> >ADAT wiring is=3D3D20<BR>> =
>different=20
than</FONT></DIV><BR>> ><DIV><FONT=20
face=3D3D3DArial =
size=3D3D3D2>standard?</FONT></D IV> <BR>> =20
><DIV><FONT face=3D3D3DArial=20
size=3D3D3D2>Thanks,</FONT></DIV > <BR>> =20
><DIV><FONT face=3D3D3DArial=20
size=3D3D3D2>Tom</FONT></DIV& ;gt; <BR>> =20
><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> =
</DIV><BR>> ><DIV><FONT face=3D3D3DArial=20
size=3D3D3D2></FONT> </DIV><BR>> =
><DIV><FONT=20
size=3D3D3D2><BR><BR>I choose Polesoft Lockspam to =
fight=20
=3D<BR>>spam, =3D3D<BR>> >and=3D3D20<BR>> =20
>you?<BR><A=3D3D20<BR>> =
=3D<BR>>>href=3D3D3D"<A=20
=
href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/re'>h=
ttp://www.polesoft.com/refer.html">http://www.polesoft.com/re</A>=3D<B=
R>>fer=3D3D<BR>> =20
>.html</A>=20
</FONT></DIV></BODY&g t;</HTML> <BR>> =20
><BR>> ><BR>><BR>><BR>><!DOCTYPE HTML =
PUBLIC=20
"-//W3C//DTD HTML 4.0=20
Transitional//EN"><BR>><HTML><HEAD> <BR>><META=20
http-equiv=3D3DContent-Type content=3D3D"text/html;=20
=3D<BR>>charset=3D3Diso-8859-1"><BR>><META =
content=3D3D"MSHTML=20
6.00.2800.1400"=20
=
name=3D3DGENERATOR><BR>><STYLE></STYLE> <BR>></HEA=
D><BR>><BODY=20
bgColor=3D3D#ffffff><BR>><DIV><FONT face=3D3DArial =
size=3D3D2>Hey=20
Rod,</FONT></DIV><BR>><DIV><FONT =
face=3D3DArial=20
size=3D3D2>That sounds promising. What cards =3D<BR>>do you=20
=
have=3D20<BR>>the</FONT></DIV> <BR>><DIV><FONT =
face=3D3DArial size=3D3D2>Mecs and 442 connected=20
to?</FONT></DIV><BR>><DIV><FONT face=3D3DArial =
size=3D3D2>Tom</FONT></DIV&g t; <BR>><DIV><FONT=20
face=3D3DArial size=3D3D2></FONT> =
</DIV><BR>><DIV>=20
=
</DIV><BR>><BLOCKQUOTE=3D20<BR >>style=3D3D"PADDING-RIGHT: =
0px;=20
PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =3D<BR>>BORDER-LEFT: #000000 =
2px solid;=20
MARGIN-RIGHT: 0px"><BR>> <DIV>"Rod Lincoln"=20
<<A=3D20<BR>> =3D<BR>>href=3D3D"<A=20
=
href=3D'mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&a=
mp;g'>mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</=
A>&g</A>=3D<BR>>t;=3D20<BR>> =20
wrote in message <A=3D20<BR>> =3D<BR>>href=3D3D"<A=20
=
href=3D"news:46451438$1@linux">news:46451438$1@linux</A>...</DIV><BR=
>I've">news:46451438$1@linux">news:46451438$1@linux</A>...</D=
IV><BR>I've</A>=3D<BR>>=20
got 2=3D20<BR>> mecs and a 442 working here, no problems at=20
all.<BR>I'm also clocking<BR>=3D<BR>>with =
the=3D20<BR>> old=20
Lucid genX word clock. 5 modules in one mec,<BR>4 modules in the =
=3D<BR>>other. 1=3D20<BR>> adat card each. 6 eds cards, 3 =
UAD cards,=20
all in<BR>a magma. Oh yeah,<BR>=3D<BR>>a =
Lynx=3D20<BR>> one in=20
the computer also.<BR>Rod<BR>"Tom Bruhl"=20
<<A=3D20<BR>> href=3D3D"<A=20
=
href=3D'mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20'>mailto=
:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20</A><BR>&g=
t; =20
wrote:<BR>><BR>>&a mp;lt;BR>>I'll be buying either =
two MECs=20
or two =3D<BR>>442s but=3D20<BR>> don't want =
it<BR>>to mess=20
my whole rig up if the 442s don't play=3D20<BR>> =
nice.<BR>>I=20
am using an older Lucid clock now with 2 Mecs=3D20<BR>> =20
already.<BR>>They each have five modules in them. The=20
others=3D20<BR>> may<BR>>see a single ADAT at most =
someday=20
maybe.<BR>><BR>>I =3D<BR>>can =
make=3D20<BR>> the=20
MECs fit in the machine room with the others<BR>>but the 442s =
=3D<BR>>would be=3D20<BR>> a lot=20
easier.<BR>><BR>>A nyone know=20
Deej?<BR>><BR>>Als o I =3D<BR>>have =
to=3D20<BR>> find=20
the pin config for a 56 pin EDAC/ELCO =
=3D<BR>>ADAT<BR>>connector. I=20
want=3D20<BR>> to chop this bad boy off and solder 16=20
TRS<BR>>to it. Anyone =3D<BR>>know=3D20<BR>> =
whether the ADAT=20
wiring is different=3D20<BR>> =20
=
=3D<BR> >than<BR>>standard?<BR&am p;gt;>Thanks,<BR>>=
Tom<BR>><BR>>& lt;BR>><B=3D <BR>>R>><=
;BR>>I=3D20<BR>> =20
choose Polesoft Lockspam to fight spam, and=3D20<BR>> =20
you?<BR>>http://www.polesoft.com/refer.html =
=3D20<BR>> =20
<BR>><BR>>< !DOCTYPE HTML PUBLIC "-//W3C//DTD HTML =
4.0=3D20<BR>> =20
=
Transitional//EN" ><BR>><HTML>&l t;HEAD><BR>>=
<META=3D20<BR>> =20
http-equiv=3D3D3DContent-Type =
content=3D3D3D"text/html;=3D20<BR>> =20
=3D3D<BR>>charset=3D3D3Diso-8859-1"><BR>><META =
=3D<BR>>content=3D3D3D"MSHTML=3D20<BR>> =
6.00.2800.1400"=3D20<BR>> =20
=
=3D<BR> >name=3D3D3DGENERATOR><BR>&g t;<STYLE></STYLE&=
gt;<BR>></HEA=3D<BR> >D><BR>><BODY=3D20 <BR>&=
gt; =20
bgColor=3D3D3D#ffffff><BR>>& lt;DIV><FONT =
face=3D3D3DArial=20
=3D<BR>>size=3D3D3D2>I'll=3D20<BR>> be buying either =
two MECs or two=20
=3D3D<BR>>442s but=3D3D20<BR>>don't=20
=3D<BR>>want=3D20<BR>> =20
it</FONT></DIV><BR> ;><DIV><FONT=20
face=3D3D3DArial=3D20<BR>> size=3D3D3D2>to mess my whole =
rig up if the=20
442s =3D3D<BR>>don't=3D20<BR>> =20
=
=3D<BR> >play=3D3D20<BR>>nice.</F ONT></DIV><BR&=
gt;><DIV><FON=3D<BR>>T=3D20 <BR>> =20
face=3D3D3DArial size=3D3D3D2>I am using an older Lucid clock now=20
=3D<BR>>=3D3D<BR>>with 2=3D20<BR>> =20
=
=3D<BR> >Mecs=3D3D20<BR>>already.< ;/FONT></DIV><=
BR>><DIV><=3D<BR>>FONT=3D20 <BR>> =20
face=3D3D3DArial size=3D3D3D2>They each have five modules in=20
=3D<BR>>=3D3D<BR>>them.=3D20<BR >> =
The=3D3D20<BR>>others=20
=
=3D<BR> >may</FONT></DIV>< BR>><DIV><FONT=3D=
20<BR>> =20
face=3D3D3DArial size=3D3D3D2>see a single ADAT at =
most=3D20<BR>> =20
=
=3D<BR> >someday=3D3D20<BR>>maybe.&l t;/FONT></DIV><=
;BR>><DIV><=3D<BR>>;FONT=3D20 <BR>> =20
face=3D3D3DArial size=3D3D3D2></FONT>=20
=
=3D<BR> ></DIV><BR>>&l t;DIV><FONT=3D20 <BR>>&nbs=
p;=20
face=3D3D3DArial size=3D3D3D2>I can make the MECs fit in =
the=3D20<BR>> =20
machine<BR>=3D3D<BR>>room =20
with=3D3D20<BR>>the=3D20<BR>> =20
others</FONT></DIV><BR&am p;gt;><DIV><FONT=20
=3D<BR>>face=3D3D3DArial=3D20<BR>> size=3D3D3D2>but the =
442s would be=20
</FONT><FONT=3D20<BR>> =20
=
=3D3D<BR>>face=3D3D3DArial=3D3D20&l t;BR>>size=3D3D3D2>a=
=20
lot=3D20<BR>> =20
easier.</FONT></DIV><BR&a mp;gt;><DIV><FONT=20
=3D<BR>>face=3D3D3DArial=3D20<BR>> =
size=3D3D3D2></FONT>=20
</DIV><BR>><DIV&am p;gt;<FONT=20
=3D<BR>>face=3D3D3DArial=3D20<BR>> size=3D3D3D2>Anyone=20
know=3D20<BR>> =20
Deej?</FONT></DIV><BR& ;gt;><DIV><FONT=20
=3D<BR>>face=3D3D3DArial=3D20<BR>> =
size=3D3D3D2></FONT>=20
</DIV><BR>><DIV&am p;gt;<FONT=20
=3D<BR>>face=3D3D3DArial=3D20<BR>> size=3D3D3D2>Also I =
have to find the=20
pin config for<BR>=3D3D<BR>>a =
=3D<BR>>56=3D20<BR>> =20
pin=3D3D20<BR>>EDAC/ELCO=3D20<BR>> =20
ADAT</FONT></DIV><BR& gt;><DIV><FONT=20
=3D<BR>>face=3D3D3DArial=3D20<BR>> =
size=3D3D3D2>connector. I want to=20
chop this =3D3D<BR>>bad boy=20
=3D<BR>>off=3D3D20<BR>>and=3D20 <BR>> solder 16=20
TRS</FONT></DIV><BR&g t;><DIV><FONT=20
=3D<BR>>face=3D3D3DArial=3D20<BR>> size=3D3D3D2>to it. =
Anyone know=20
whether the =3D3D<BR>>ADAT wiring=3D20<BR>> =20
is=3D3D20<BR>>different=3D20<BR>> =20
than</FONT></DIV><BR& gt;><DIV><FONT=20
=3D<BR>>face=3D3D3DArial=3D20<BR>> =20
=
=3D<BR> >size=3D3D3D2>standard?</FONT>&a mp;lt;/DIV><BR>&g=
t;<DIV><FO=3D<BR>>NT=3D20<BR>> =20
face=3D3D3DArial=3D20<BR>> =20
=
=3D<BR> >size=3D3D3D2>Thanks,</FONT>& ;lt;/DIV><BR>>=
<DIV><FONT=3D<BR>>=3D20<BR>> =20
face=3D3D3DArial=3D20<BR>> =20
=
size=3D3D3D2>Tom</FONT></DIV& ;gt;<BR>><DIV><=
FONT=3D20<BR>> =20
face=3D3D3DArial size=3D3D3D2></FONT>=20
=
=3D<BR> ></DIV><BR>>&l t;DIV><FONT=3D20 <BR>>&nbs=
p;=20
face=3D3D3DArial size=3D3D3D2></FONT>=20
=
=3D<BR> ></DIV><BR>>&l t;DIV><FONT=3D20 <BR>>&nbs=
p;=20
size=3D3D3D2><BR><BR>I choose Polesoft Lockspam to =
fight=20
=3D<BR>>spam,=3D20<BR>> =20
=
=3D<BR> >=3D3D<BR>>and=3D3D20<BR& amp;gt;>you?<BR><A=
=3D3D20<BR>>href=3D3D3D"<A=3D20 <BR>> =20
=
=3D<BR>>href=3D3D'http://www.polesoft.com/refer.html">http://www.po=
lesoft.com/refer=3D<BR>>'>http://www.polesoft.com/refer.html">ht=
tp://www.polesoft.com/refer</A=3D<BR>>>=3D3D<BR>>.html&=
lt;/A>=3D20<BR>> =20
=
=3D<BR> ></FONT></DIV></BO DY></HTML><BR>&=
gt;<BR>><BR></=3D<BR >>BLOCKQUOTE></BODY><=
;/HTML><BR>><BR>><BR></BLOCKQUOTE ></BODY></HTML>
------=_NextPart_000_005F_01C7942C.02A5F150--
|
|
|
|
| Re: Paris 3.0/XP MECs and 442s work nicely or no? Also Elco pin out.. . [message #84372 is a reply to message #84354] |
Fri, 11 May 2007 22:26 |
JeffH
Messages: 307
Registered: October 2007
Location: Wamic, OR
|
Senior Member |
|
|
Tom
Like ROd and others I'm going digital to a DAC1, but me it's off the
S/PDIF on the 442. How many bits is that thing?
I just like having all my 24 bit inputs off the master card for
recording, and I'm too lazy to move things around after I record. I
think either way will work. I cannot stress enough the importance of
GREAT SYNC in this situation. I wrestled waaaaaay too many hours before
I finally put in word clock cables all the same length and of good
quality. Once I got them all the same hooked to the Lucid GenX,
everything has been smooth sailing (except for the occasional experience
of Auto tune starting up at the wrong sample rate. I really though I
stunk as a singer until I looked up and saw it running a 48 on a 44.1
project!).
JH
> Jeff,
> I did that a couple of weeks ago too and it stabilized Paris for sure.
> I get crashes booting up Paris still for other reasons but once it's up
> and running
> it is more stable on the Root C: . Thank you Dimitrios.
> Those other changes D. suggested are still in the making for me.
> Big stuff there!
>
> I'd rather have a MEC on the A card for the 24 bit SPDIF. Are you
> just monitoring 20 bit?
> Tom
>
>
>
>
>
>
> "Jeff Hoover" <jkhoover@excite.com <mailto:jkhoover@excite.com>>
> wrote in message news:46452c27@linux...
> Tom,
>
> Running a 4 card system:
>
> A 442
> B 442
> C Nada
> D Mec with 2 modules
>
> Just cleaned up and reinstalled Paris directly off the root
> (C:]ParisPro) a week and a half ago. Ben rock solid on 5 sessions do
> far.
>
> JH
>
> Bruhl wrote:
> > Hey Rod,
> > That sounds promising. What cards do you have the
> > Mecs and 442 connected to?
> > Tom
> >
> >
> >
> > "Rod Lincoln" <rlincoln@nospam.kc.rr.com
> <mailto:rlincoln@nospam.kc.rr.com>
> > <mailto:rlincoln@nospam.kc.rr.com>> wrote in message
> > news:46451438$1@linux...
> >
> > I've got 2 mecs and a 442 working here, no problems at all.
> > I'm also clocking with the old Lucid genX word clock. 5
> modules in
> > one mec,
> > 4 modules in the other. 1 adat card each. 6 eds cards, 3 UAD
> cards,
> > all in
> > a magma. Oh yeah, a Lynx one in the computer also.
> > Rod
> > "Tom Bruhl" <arpegio@comcast.net <mailto:arpegio@comcast.net>
> <mailto:arpegio@comcast.net>> wrote:
> > >
> > >
> > >I'll be buying either two MECs or two 442s but don't want it
> > >to mess my whole rig up if the 442s don't play nice.
> > >I am using an older Lucid clock now with 2 Mecs already.
> > >They each have five modules in them. The others may
> > >see a single ADAT at most someday maybe.
> > >
> > >I can make the MECs fit in the machine room with the others
> > >but the 442s would be a lot easier.
> > >
> > >Anyone know Deej?
> > >
> > >Also I have to find the pin config for a 56 pin EDAC/ELCO ADAT
> > >connector. I want to chop this bad boy off and solder 16 TRS
> > >to it. Anyone know whether the ADAT wiring is different than
> > >standard?
> > >Thanks,
> > >Tom
> > >
> > >
> > >
> > >
> > >I choose Polesoft Lockspam to fight spam, and you?
> > >http://www.polesoft.com/refer.html
> > >
> > ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
> > ><HTML><HEAD>
> > ><META http-equiv=3DContent-Type content=3D"text/html; =
> > >charset=3Diso-8859-1">
> > ><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
> > ><STYLE></STYLE>
> > ></HEAD>
> > ><BODY bgColor=3D#ffffff>
> > ><DIV><FONT face=3DArial size=3D2>I'll be buying either two
> MECs or
> > two =
> > >442s but=20
> > >don't want it</FONT></DIV>
> > ><DIV><FONT face=3DArial size=3D2>to mess my whole rig up if
> the 442s =
> > >don't play=20
> > >nice.</FONT></DIV>
> > ><DIV><FONT face=3DArial size=3D2>I am using an older Lucid
> clock now =
> > >with 2 Mecs=20
> > >already.</FONT></DIV>
> > ><DIV><FONT face=3DArial size=3D2>They each have five
> modules in =
> > >them. The=20
> > >others may</FONT></DIV>
> > ><DIV><FONT face=3DArial size=3D2>see a single ADAT at most
> someday=20
> > >maybe.</FONT></DIV>
> > ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> > ><DIV><FONT face=3DArial size=3D2>I can make the MECs fit in the
> > machine
> > =
> > >room with=20
> > >the others</FONT></DIV>
> > ><DIV><FONT face=3DArial size=3D2>but the 442s would be
> </FONT><FONT =
> > >face=3DArial=20
> > >size=3D2>a lot easier.</FONT></DIV>
> > ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> > ><DIV><FONT face=3DArial size=3D2>Anyone know Deej?</FONT></DIV>
> > ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> > ><DIV><FONT face=3DArial size=3D2>Also I have to find the pin
> > config for
> > =
> > >a 56 pin=20
> > >EDAC/ELCO ADAT</FONT></DIV>
> > ><DIV><FONT face=3DArial size=3D2>connector. I want to chop
> this =
> > >bad boy off=20
> > >and solder 16 TRS</FONT></DIV>
> > ><DIV><FONT face=3DArial size=3D2>to it. Anyone know whether
> the =
> > >ADAT wiring is=20
> > >different than</FONT></DIV>
> > ><DIV><FONT face=3DArial size=3D2>standard?</FONT></DIV>
> > ><DIV><FONT face=3DArial size=3D2>Thanks,</FONT></DIV>
> > ><DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
> > ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> > ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> > ><DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight
> > spam, =
> > >and=20
> > >you?<BR><A=20
> >
> >href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer
> <http://www.polesoft.com/refer.html">http://www.polesoft.com/refer>
> >
> <http://www.polesoft.com/refer.html">http://www.polesoft.com/refer
> <http://www.polesoft.com/refer.html">http://www.polesoft.com/refer>>=
> > >.html</A> </FONT></DIV></BODY></HTML>
> > >
> > >
|
|
|
|
| Re: Paris 3.0/XP MECs and 442s work nicely or no? Also Elco pin out. . . [message #84379 is a reply to message #84372] |
Fri, 11 May 2007 23:33 |
Tom Bruhl
Messages: 1368
Registered: June 2007
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_007A_01C7943D.DD8DC480
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Jeff,
The 442 only gives you 20 bit at the spdif.
You're missing a little something if that's what
you're monitoring through. I do it too but I can
go to 24 bit with a quick switch to compare.
It is usually undetectable except with jazz and
more open sounding mixes for me.
Thanks for your advice.
Tom
"Jeff Hoover" <jkhoover@excite.com> wrote in message =
news:46455183@linux...
Tom
Like ROd and others I'm going digital to a DAC1, but me it's off the=20
S/PDIF on the 442. How many bits is that thing?
I just like having all my 24 bit inputs off the master card for=20
recording, and I'm too lazy to move things around after I record. I=20
think either way will work. I cannot stress enough the importance of=20
GREAT SYNC in this situation. I wrestled waaaaaay too many hours =
before=20
I finally put in word clock cables all the same length and of good=20
quality. Once I got them all the same hooked to the Lucid GenX,=20
everything has been smooth sailing (except for the occasional =
experience=20
of Auto tune starting up at the wrong sample rate. I really though I=20
stunk as a singer until I looked up and saw it running a 48 on a 44.1=20
project!).
JH
> Jeff,
> I did that a couple of weeks ago too and it stabilized Paris for =
sure.
> I get crashes booting up Paris still for other reasons but once it's =
up=20
> and running=20
> it is more stable on the Root C: . Thank you Dimitrios.
> Those other changes D. suggested are still in the making for me.
> Big stuff there!
> =20
> I'd rather have a MEC on the A card for the 24 bit SPDIF. Are you
> just monitoring 20 bit?
> Tom
> =20
> =20
> =20
> =20
> =20
>=20
> "Jeff Hoover" <jkhoover@excite.com <mailto:jkhoover@excite.com>>
> wrote in message news:46452c27@linux...
> Tom,
>=20
> Running a 4 card system:
>=20
> A 442
> B 442
> C Nada
> D Mec with 2 modules
>=20
> Just cleaned up and reinstalled Paris directly off the root
> (C:]ParisPro) a week and a half ago. Ben rock solid on 5 =
sessions do
> far.
>=20
> JH
>=20
> Bruhl wrote:
> > Hey Rod,
> > That sounds promising. What cards do you have the
> > Mecs and 442 connected to?
> > Tom
> >=20
> >=20
> >
> > "Rod Lincoln" <rlincoln@nospam.kc.rr.com
> <mailto:rlincoln@nospam.kc.rr.com>
> > <mailto:rlincoln@nospam.kc.rr.com>> wrote in message
> > news:46451438$1@linux...
> >
> > I've got 2 mecs and a 442 working here, no problems at =
all.
> > I'm also clocking with the old Lucid genX word clock. 5
> modules in
> > one mec,
> > 4 modules in the other. 1 adat card each. 6 eds cards, 3 =
UAD
> cards,
> > all in
> > a magma. Oh yeah, a Lynx one in the computer also.
> > Rod
> > "Tom Bruhl" <arpegio@comcast.net =
<mailto:arpegio@comcast.net>
> <mailto:arpegio@comcast.net>> wrote:
> > >
> > >
> > >I'll be buying either two MECs or two 442s but don't =
want it
> > >to mess my whole rig up if the 442s don't play nice.
> > >I am using an older Lucid clock now with 2 Mecs =
already.
> > >They each have five modules in them. The others may
> > >see a single ADAT at most someday maybe.
> > >
> > >I can make the MECs fit in the machine room with the =
others
> > >but the 442s would be a lot easier.
> > >
> > >Anyone know Deej?
> > >
> > >Also I have to find the pin config for a 56 pin =
EDAC/ELCO ADAT
> > >connector. I want to chop this bad boy off and solder =
16 TRS
> > >to it. Anyone know whether the ADAT wiring is =
different than
> > >standard?
> > >Thanks,
> > >Tom
> > >
> > >
> > >
> > >
> > >I choose Polesoft Lockspam to fight spam, and you?
> > >http://www.polesoft.com/refer.html=20
> > >
> > ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 =
Transitional//EN">
> > ><HTML><HEAD>
> > ><META http-equiv=3D3DContent-Type =
content=3D3D"text/html; =3D
> > >charset=3D3Diso-8859-1">
> > ><META content=3D3D"MSHTML 6.00.2800.1400" =
name=3D3DGENERATOR>
> > ><STYLE></STYLE>
> > ></HEAD>
> > ><BODY bgColor=3D3D#ffffff>
> > ><DIV><FONT face=3D3DArial size=3D3D2>I'll be buying =
either two
> MECs or
> > two =3D
> > >442s but=3D20
> > >don't want it</FONT></DIV>
> > ><DIV><FONT face=3D3DArial size=3D3D2>to mess my whole =
rig up if
> the 442s =3D
> > >don't play=3D20
> > >nice.</FONT></DIV>
> > ><DIV><FONT face=3D3DArial size=3D3D2>I am using an =
older Lucid
> clock now =3D
> > >with 2 Mecs=3D20
> > >already.</FONT></DIV>
> > ><DIV><FONT face=3D3DArial size=3D3D2>They each have =
five
> modules in =3D
> > >them. The=3D20
> > >others may</FONT></DIV>
> > ><DIV><FONT face=3D3DArial size=3D3D2>see a single ADAT =
at most
> someday=3D20
> > >maybe.</FONT></DIV>
> > ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> > ><DIV><FONT face=3D3DArial size=3D3D2>I can make the =
MECs fit in the
> > machine
> > =3D
> > >room with=3D20
> > >the others</FONT></DIV>
> > ><DIV><FONT face=3D3DArial size=3D3D2>but the 442s would =
be
> </FONT><FONT =3D
> > >face=3D3DArial=3D20
> > >size=3D3D2>a lot easier.</FONT></DIV>
> > ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> > ><DIV><FONT face=3D3DArial size=3D3D2>Anyone know =
Deej?</FONT></DIV>
> > ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> > ><DIV><FONT face=3D3DArial size=3D3D2>Also I have to =
find the pin
> > config for
> > =3D
> > >a 56 pin=3D20
> > >EDAC/ELCO ADAT</FONT></DIV>
> > ><DIV><FONT face=3D3DArial size=3D3D2>connector. I want =
to chop
> this =3D
> > >bad boy off=3D20
> > >and solder 16 TRS</FONT></DIV>
> > ><DIV><FONT face=3D3DArial size=3D3D2>to it. Anyone know =
whether
> the =3D
> > >ADAT wiring is=3D20
> > >different than</FONT></DIV>
> > ><DIV><FONT face=3D3DArial =
size=3D3D2>standard?</FONT></DIV>
> > ><DIV><FONT face=3D3DArial =
size=3D3D2>Thanks,</FONT></DIV>
> > ><DIV><FONT face=3D3DArial size=3D3D2>Tom</FONT></DIV>
> > ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> > ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> > ><DIV><FONT size=3D3D2><BR><BR>I choose Polesoft =
Lockspam to fight
> > spam, =3D
> > >and=3D20
> > >you?<BR><A=3D20
> > =20
> =
>href=3D3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/re=
fer
> =
<http://www.polesoft.com/refer.html">http://www.polesoft.com/refer>
> > =20
> =
<http://www.polesoft.com/refer.html">http://www.polesoft.com/refer
> =
<http://www.polesoft.com/refer.html">http://www.polesoft.com/refer>>=3D
> > >.html</A> </FONT></DIV></BODY></HTML>
> > >
> > >
------=_NextPart_000_007A_01C7943D.DD8DC480
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Jeff,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>The 442 only gives you 20 bit at the=20
spdif.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>You're missing a little something if =
that's=20
what</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>you're monitoring through. I do =
it too but I=20
can</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>go to 24 bit with a quick switch to=20
compare.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>It is usually undetectable except with =
jazz=20
and</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>more open sounding mixes for =
me.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Thanks for your advice.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Jeff Hoover" <<A=20
href=3D"mailto:jkhoover@excite.com">jkhoover@excite.com</A>> wrote =
in message=20
<A =
href=3D"news:46455183@linux">news:46455183@linux</A>...</DIV>Tom<BR><BR>L=
ike=20
ROd and others I'm going digital to a DAC1, but me it's off the =
<BR>S/PDIF on=20
the 442. How many bits is that thing?<BR><BR>I just like having =
all my=20
24 bit inputs off the master card for <BR>recording, and I'm too lazy =
to move=20
things around after I record. I <BR>think either way will =
work. I=20
cannot stress enough the importance of <BR>GREAT SYNC in this =
situation. =20
I wrestled waaaaaay too many hours before <BR>I finally put in word =
clock=20
cables all the same length and of good <BR>quality. Once I got =
them all=20
the same hooked to the Lucid GenX, <BR>everything has been smooth =
sailing=20
(except for the occasional experience <BR>of Auto tune starting up at =
the=20
wrong sample rate. I really though I <BR>stunk as a singer until =
I=20
looked up and saw it running a 48 on a 44.1=20
<BR>project!).<BR><BR><BR>JH<BR><BR><BR>> Jeff,<BR>> I did that =
a couple=20
of weeks ago too and it stabilized Paris for sure.<BR>> I get =
crashes=20
booting up Paris still for other reasons but once it's up <BR>> and =
running=20
<BR>> it is more stable on the Root C: . Thank you =
Dimitrios.<BR>>=20
Those other changes D. suggested are still in the making for =
me.<BR>> Big=20
stuff there!<BR>> <BR>> I'd rather have a MEC on the A =
card for=20
the 24 bit SPDIF. Are you<BR>> just monitoring 20 =
bit?<BR>>=20
Tom<BR>> <BR>> <BR>> <BR>> =
<BR>> =20
<BR>> <BR>> "Jeff Hoover" <<A=20
href=3D"mailto:jkhoover@excite.com">jkhoover@excite.com</A> <<A=20
=
href=3D"mailto:jkhoover@excite.com">mailto:jkhoover@excite.com</A>>>=
;<BR>> =20
wrote in message <A=20
=
href=3D"news:46452c27@linux">news:46452c27@linux</A>...<BR>> &nbs=
p; =20
Tom,<BR>> <BR>> Running a 4 card =
system:<BR>>=20
<BR>> A 442<BR>> =
B=20
442<BR>> C =
Nada<BR>> D=20
Mec with 2 modules<BR>> <BR>> Just =
cleaned up=20
and reinstalled Paris directly off the =
root<BR>> =20
(C:]ParisPro) a week and a half ago. Ben rock solid on 5 =
sessions=20
do<BR>> far.<BR>>=20
<BR>> JH<BR>> =
<BR>> =20
Bruhl wrote:<BR>> > Hey=20
Rod,<BR>> > That sounds =
promising. =20
What cards do you have the<BR>> > =
Mecs and=20
442 connected to?<BR>> >=20
Tom<BR>> >=20
<BR>> >=20
<BR> > =2 0
><BR>> =
> "Rod=20
Lincoln" <<A=20
=
href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A><B=
R>> =20
<<A=20
=
href=3D"mailto:rlincoln@nospam.kc.rr.com">mailto:rlincoln@nospam.kc.rr.co=
m</A>><BR> > =2 0
> <<A=20
=
href=3D"mailto:rlincoln@nospam.kc.rr.com">mailto:rlincoln@nospam.kc.rr.co=
m</A>>>=20
wrote in message<BR> > =2 0
> <A=20
=
href=3D"news:46451438$1@linux">news:46451438$1@linux</A>...<BR>> =
=20
><BR>> =
> I've=20
got 2 mecs and a 442 working here, no problems at=20
all.<BR>> =
> I'm=20
also clocking with the old Lucid genX word clock.=20
5<BR>> modules=20
in<BR>> > =
one=20
mec,<BR>> =
> 4=20
modules in the other. 1 adat card each. 6 eds cards, 3=20
UAD<BR>> =20
cards,<BR>> =
> all=20
in<BR>> > =
a magma.=20
Oh yeah, a Lynx one in the computer=20
also.<BR>> =
> =20
Rod<BR>> > =
"Tom=20
Bruhl" <<A =
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A> <<A=20
=
href=3D"mailto:arpegio@comcast.net">mailto:arpegio@comcast.net</A>><BR=
>> =20
<<A=20
=
href=3D"mailto:arpegio@comcast.net">mailto:arpegio@comcast.net</A>>>=
;=20
wrote:<BR> > =2 0
> =
><BR> > =2 0
> =
><BR> > =2 0
> >I'll be buying either two MECs =
or two=20
442s but don't want it<BR> > =2 0
> >to mess my whole rig up if the =
442s=20
don't play nice.<BR> > =2 0
> >I am using an older Lucid clock =
now=20
with 2 Mecs already.<BR> > =2 0
> >They each have five modules in=20
them. The others may<BR> > =2 0
> >see a single ADAT at most =
someday=20
maybe.<BR> > =2 0
> =
><BR> > =2 0
> >I can make the MECs fit in the =
machine=20
room with the others<BR> > =2 0
> >but the 442s would be a lot=20
easier.<BR> > =2 0
> =
><BR> > =2 0
> >Anyone know=20
Deej?<BR>> =
> =2 0
><BR>> =
> =2 0
>Also I have to find the pin config for a 56 pin EDAC/ELCO=20
ADAT<BR>> =
> =2 0
>connector. I want to chop this bad boy off and solder 16=20
TRS<BR>> =
> =2 0
>to it. Anyone know whether the ADAT wiring is different=20
than<BR>> =
> =2 0
>standard?<BR> > =2 0
> =2 0
>Thanks,<BR> > =2 0
> =2 0
>Tom<BR> > =2 0
> =
><BR> > =2 0
> =
><BR> > =2 0
> =
><BR> > =2 0
> =
><BR> > =2 0
> >I choose Polesoft Lockspam to =
fight=20
spam, and you?<BR> > =2 0
> =
>http://www.polesoft.com/refer.html=20
<BR>> =
> =2 0
><BR>> =
> =2 0
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0=20
Transitional//EN"><BR> > =2 0
> =2 0
><HTML><HEAD><BR> > =2 0
> ><META =
http-equiv=3D3DContent-Type=20
content=3D3D"text/html; =3D<BR> > =2 0
> =2 0
>charset=3D3Diso-8859-1"><BR> > =2 0
> ><META content=3D3D"MSHTML=20
6.00.2800.1400" =
name=3D3DGENERATOR><BR> > =2 0
> =2 0
><STYLE></STYLE><BR> > =2 0
> =2 0
></HEAD><BR> > =2 0
> ><BODY=20
bgColor=3D3D#ffffff><BR> > =2 0
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2>I'll be buying either =
two<BR>> MECs=20
or<BR>> > =
two=20
=3D<BR>> =
> =2 0
>442s but=3D20<BR> > =2 0
> >don't want=20
it</FONT></DIV><BR> > =2 0
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2>to mess my whole rig up =
if<BR>> the=20
442s =3D<BR> > =2 0
> >don't=20
play=3D20<BR> > =2 0
> =2 0
=
>nice.</FONT></DIV><BR>> =
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2>I am using an older =
Lucid<BR>> clock=20
now =3D<BR>> =
> =2 0
>with 2 Mecs=3D20<BR> > =2 0
> =2 0
=
>already.</FONT></DIV><BR >> &nbs=
p;=20
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2>They each have five<BR>> =
modules in=20
=3D<BR>> =
> =2 0
>them. The=3D20<BR> > =2 0
> >others=20
may</FONT></DIV><BR> > =2 0
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2>see a single ADAT at =
most<BR>> =20
someday=3D20<BR> > =2 0
> =2 0
=
>maybe.</FONT></DIV><BR>> =
=20
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2></FONT> =
</DIV><BR> > =2 0
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2>I can make the MECs fit in=20
the<BR>> > =
machine<BR>> =
> =20
=3D<BR>> =
> =2 0
>room with=3D20<BR> > =2 0
> >the=20
others</FONT></DIV><BR> > =2 0
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2>but the 442s would be<BR>> =20
</FONT><FONT =3D<BR> > =2 0
> =2 0
>face=3D3DArial=3D20<BR> > =2 0
> >size=3D3D2>a lot=20
easier.</FONT></DIV><BR>> =
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2></FONT> =
</DIV><BR> > =2 0
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2>Anyone know=20
Deej?</FONT></DIV><BR> > =2 0
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2></FONT> =
</DIV><BR> > =2 0
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2>Also I have to find the =
pin<BR> > =2 0
> config =
for<BR> > =2 0
> =3D<BR>> =
> >a 56=20
pin=3D20<BR> > =2 0
> >EDAC/ELCO=20
ADAT</FONT></DIV><BR> > =2 0
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2>connector. I want to =
chop<BR>> this=20
=3D<BR>> =
> =2 0
>bad boy off=3D20<BR> > =2 0
> >and solder 16=20
TRS</FONT></DIV><BR> > =2 0
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2>to it. Anyone know =
whether<BR>> the=20
=3D<BR>> =
> =2 0
>ADAT wiring is=3D20<BR> > =2 0
> >different=20
than</FONT></DIV><BR> > =2 0
> ><DIV><FONT =
face=3D3DArial=20
=
size=3D3D2>standard?</FONT></DIV > <BR>>  =
; =20
> ><DIV><FONT =
face=3D3DArial=20
=
size=3D3D2>Thanks,</FONT></DIV&a mp;gt; <BR>> &=
nbsp; =20
> ><DIV><FONT =
face=3D3DArial=20
=
size=3D3D2>Tom</FONT></DIV&g t; <BR>>  =
; =20
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2></FONT> =
</DIV><BR> > =2 0
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2></FONT> =
</DIV><BR> > =2 0
> ><DIV><FONT=20
size=3D3D2><BR><BR>I choose Polesoft Lockspam to=20
fight<BR>> =
> spam,=20
=3D<BR>> =
> =2 0
>and=3D20<BR> > =2 0
> =2 0
>you?<BR><A=3D20<BR> > =2 0
> <BR> > =2 0
>href=3D3D"<A=20
=
href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
'>http://www.polesoft.com/refer.html">http://www.polesoft.com/refer</A=
><BR>> =20
<<A=20
=
href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
'>http://www.polesoft.com/refer.html">http://www.polesoft.com/refer</A=
>><BR> > =2 0
> <BR>> <<A=20
=
href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
'>http://www.polesoft.com/refer.html">http://www.polesoft.com/refer</A=
><BR>> =20
<<A=20
=
href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
'>http://www.polesoft.com/refer.html">http://www.polesoft.com/refer</A=
>>>=3D<BR> > =2 0
> >.html</A>=20
=
</FONT></DIV></BODY&g t;</HTML> <BR>> &n=
bsp; =20
> =
><BR> > =2 0
> ></BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_007A_01C7943D.DD8DC480--
|
|
|
|
| Re: Paris 3.0/XP MECs and 442s work nicely or no? Also Elco pin out. . . [message #84380 is a reply to message #84359] |
Fri, 11 May 2007 23:56 |
Dimitrios
Messages: 1056
Registered: August 2005
|
Senior Member |
|
|
Hi Tom,
When I tried this 442 and mec combination I only found a working clocked
system if 442 was a master so 20 bits versus 24 was inportant to me for monitoring
! (I still record only 16 bits !).
What though was evident is that I could NEVER have the ins and outs of 442
working correctly.
You know sometimes we use 442 along mec and we mostly don't use much of 442
except for a spdif or something.
It would be nice if someone could CHECK that in a multi mec 442 system ALL
442's ins and outs along with mec's are working correctly.
I know this is much to ask but Tom (and I at least) would love that kind
of testing info.
A 442 would be a great addition to me IF mec could be main card A and all
ins and outs of everything would work.
Is this an XP problem or is it the same as in win98 or Me ?
Regards,
Dimitrios
"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>What do you guys think,
>What are my chances of getting two 442s in the mix
>without my Mecs losing some of their cards?
>T.
>
> "Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message =
>news:46453f51$1@linux...
>
> Mec 1 on card A, 442 on Card B, Mec 2 on Card F (my last card)
> I'm running spdif out of Mec 1 to a DAC 1
> Rod
> "Tom Bruhl" <arpegio@comcast.net> wrote:
> >
> >
> >Hey Rod,
> >That sounds promising. What cards do you have the
> >Mecs and 442 connected to?
> >Tom
> >
> >
> > "Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message =3D
> >news:46451438$1@linux...
> >
> > I've got 2 mecs and a 442 working here, no problems at all.
> > I'm also clocking with the old Lucid genX word clock. 5 modules in
=
>one
> =3D
> >mec,
> > 4 modules in the other. 1 adat card each. 6 eds cards, 3 UAD cards,
=
>=3D
> >all in
> > a magma. Oh yeah, a Lynx one in the computer also.
> > Rod
> > "Tom Bruhl" <arpegio@comcast.net> wrote:
> > >
> > >
> > >I'll be buying either two MECs or two 442s but don't want it
> > >to mess my whole rig up if the 442s don't play nice.
> > >I am using an older Lucid clock now with 2 Mecs already.
> > >They each have five modules in them. The others may
> > >see a single ADAT at most someday maybe.
> > >
> > >I can make the MECs fit in the machine room with the others
> > >but the 442s would be a lot easier.
> > >
> > >Anyone know Deej?
> > >
> > >Also I have to find the pin config for a 56 pin EDAC/ELCO ADAT
> > >connector. I want to chop this bad boy off and solder 16 TRS
> > >to it. Anyone know whether the ADAT wiring is different than
> > >standard?
> > >Thanks,
> > >Tom
> > >
> > >
> > >
> > >
> > >I choose Polesoft Lockspam to fight spam, and you?
> > >http://www.polesoft.com/refer.html =3D20
> > >
> > ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
> > ><HTML><HEAD>
> > ><META http-equiv=3D3D3DContent-Type content=3D3D3D"text/html; =
>=3D3D
> > >charset=3D3D3Diso-8859-1">
> > ><META content=3D3D3D"MSHTML 6.00.2800.1400" name=3D3D3DGENERATOR>
> > ><STYLE></STYLE>
> > ></HEAD>
> > ><BODY bgColor=3D3D3D#ffffff>
> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>I'll be buying either two
=
>MECs =3D
> >or two =3D3D
> > >442s but=3D3D20
> > >don't want it</FONT></DIV>
> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>to mess my whole rig up =
>if the =3D
> >442s =3D3D
> > >don't play=3D3D20
> > >nice.</FONT></DIV>
> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>I am using an older Lucid
=
>clock
> =3D
> >now =3D3D
> > >with 2 Mecs=3D3D20
> > >already.</FONT></DIV>
> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>They each have five =
>modules in =3D
> >=3D3D
> > >them. The=3D3D20
> > >others may</FONT></DIV>
> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>see a single ADAT at most
=
>=3D
> >someday=3D3D20
> > >maybe.</FONT></DIV>
> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>I can make the MECs fit =
>in the =3D
> >machine
> > =3D3D
> > >room with=3D3D20
> > >the others</FONT></DIV>
> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>but the 442s would be =3D
> ></FONT><FONT =3D3D
> > >face=3D3D3DArial=3D3D20
> > >size=3D3D3D2>a lot easier.</FONT></DIV>
> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Anyone know =
>Deej?</FONT></DIV>
> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Also I have to find the =
>pin =3D
> >config for
> > =3D3D
> > >a 56 pin=3D3D20
> > >EDAC/ELCO ADAT</FONT></DIV>
> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>connector. I want to chop
=
>this =3D
> >=3D3D
> > >bad boy off=3D3D20
> > >and solder 16 TRS</FONT></DIV>
> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>to it. Anyone know =
>whether the =3D
> >=3D3D
> > >ADAT wiring is=3D3D20
> > >different than</FONT></DIV>
> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>standard?</FONT></DIV>
> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Thanks,</FONT></DIV>
> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Tom</FONT></DIV>
> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
> > ><DIV><FONT size=3D3D3D2><BR><BR>I choose Polesoft Lockspam to =
>fight =3D
> >spam, =3D3D
> > >and=3D3D20
> > >you?<BR><A=3D3D20
> > =3D
> =
>>>href=3D3D3D"http://www.polesoft.com/refer.html">http://www.polesoft.com=
>/re=3D
> >fer=3D3D
> > >.html</A> </FONT></DIV></BODY></HTML>
> > >
> > >
> >
> >
> ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
> ><HTML><HEAD>
> ><META http-equiv=3D3DContent-Type content=3D3D"text/html; =3D
> >charset=3D3Diso-8859-1">
> ><META content=3D3D"MSHTML 6.00.2800.1400" name=3D3DGENERATOR>
> ><STYLE></STYLE>
> ></HEAD>
> ><BODY bgColor=3D3D#ffffff>
> ><DIV><FONT face=3D3DArial size=3D3D2>Hey Rod,</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>That sounds promising. What =
>cards =3D
> >do you have=3D20
> >the</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>Mecs and 442 connected =
>to?</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>Tom</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> ><DIV> </DIV>
> ><BLOCKQUOTE=3D20
> >style=3D3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>=3D
> >BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> > <DIV>"Rod Lincoln" <<A=3D20
> > =3D
> =
>>href=3D3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A=
>>&g=3D
> >t;=3D20
> > wrote in message <A=3D20
> > =3D
> =
>>href=3D3D"news:46451438$1@linux">news:46451438$1@linux</A>...</DIV><BR>I=
>'ve=3D
> > got 2=3D20
> > mecs and a 442 working here, no problems at all.<BR>I'm also =
>clocking
> =3D
> >with the=3D20
> > old Lucid genX word clock. 5 modules in one mec,<BR>4 modules in =
>the =3D
> >other. 1=3D20
> > adat card each. 6 eds cards, 3 UAD cards, all in<BR>a magma. Oh =
>yeah,
> =3D
> >a Lynx=3D20
> > one in the computer also.<BR>Rod<BR>"Tom Bruhl" <<A=3D20
> > href=3D3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20
> > wrote:<BR>><BR>><BR>>I'll be buying either two MECs or two =3D
> >442s but=3D20
> > don't want it<BR>>to mess my whole rig up if the 442s don't =
>play=3D20
> > nice.<BR>>I am using an older Lucid clock now with 2 Mecs=3D20
> > already.<BR>>They each have five modules in them. The others=3D20
> > may<BR>>see a single ADAT at most someday maybe.<BR>><BR>>I =3D
> >can make=3D20
> > the MECs fit in the machine room with the others<BR>>but the 442s =
>=3D
> >would be=3D20
> > a lot easier.<BR>><BR>>Anyone know Deej?<BR>><BR>>Also I =3D
> >have to=3D20
> > find the pin config for a 56 pin EDAC/ELCO =3D
> >ADAT<BR>>connector. I want=3D20
> > to chop this bad boy off and solder 16 TRS<BR>>to it. Anyone =3D
> >know=3D20
> > whether the ADAT wiring is different=3D20
> > =3D
> >than<BR>>standard?<BR>>Thanks,<BR>>Tom<BR>><BR>><BR >><B=3D
> >R>><BR>>I=3D20
> > choose Polesoft Lockspam to fight spam, and=3D20
> > you?<BR>>http://www.polesoft.com/refer.html =3D20
> > <BR>><BR>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0=3D20
> > Transitional//EN"><BR>><HTML><HEAD><BR>><META=3D20
> > http-equiv=3D3D3DContent-Type content=3D3D3D"text/html;=3D20
> > =3D3D<BR>>charset=3D3D3Diso-8859-1"><BR>><META =3D
> >content=3D3D3D"MSHTML=3D20
> > 6.00.2800.1400"=3D20
> > =3D
> >name=3D3D3DGENERATOR><BR>><STYLE></STYLE><BR>></HEA=3D
> >D><BR>><BODY=3D20
> > bgColor=3D3D3D#ffffff><BR>><DIV><FONT face=3D3D3DArial =3D
> >size=3D3D3D2>I'll=3D20
> > be buying either two MECs or two =3D3D<BR>>442s =
>but=3D3D20<BR>>don't =3D
> >want=3D20
> > it</FONT></DIV><BR>><DIV><FONT face=3D3D3DArial=3D20
> > size=3D3D3D2>to mess my whole rig up if the 442s =
>=3D3D<BR>>don't=3D20
> > =3D
> >play=3D3D20<BR>>nice.</FONT></DIV><BR>><DIV><FON=3D
> >T=3D20
> > face=3D3D3DArial size=3D3D3D2>I am using an older Lucid clock now =
>=3D
> >=3D3D<BR>>with 2=3D20
> > =3D
> >Mecs=3D3D20<BR>>already.</FONT></DIV><BR>><DIV><=3D
> >FONT=3D20
> > face=3D3D3DArial size=3D3D3D2>They each have five modules in =3D
> >=3D3D<BR>>them.=3D20
> > The=3D3D20<BR>>others =3D
> >may</FONT></DIV><BR>><DIV><FONT=3D20
> > face=3D3D3DArial size=3D3D3D2>see a single ADAT at most=3D20
> > =3D
> >someday=3D3D20<BR>>maybe.</FONT></DIV><BR>><DIV><=3D
> >;FONT=3D20
> > face=3D3D3DArial size=3D3D3D2></FONT> =3D
> ></DIV><BR>><DIV><FONT=3D20
> > face=3D3D3DArial size=3D3D3D2>I can make the MECs fit in the=3D20
> > machine<BR>=3D3D<BR>>room with=3D3D20<BR>>the=3D20
> > others</FONT></DIV><BR>><DIV><FONT =3D
> >face=3D3D3DArial=3D20
> > size=3D3D3D2>but the 442s would be </FONT><FONT=3D20
> > =3D3D<BR>>face=3D3D3DArial=3D3D20<BR>>size=3D3D3D2>a lot=3D20
> > easier.</FONT></DIV><BR>><DIV><FONT =3D
> >face=3D3D3DArial=3D20
> > size=3D3D3D2></FONT> </DIV><BR>><DIV><FONT =3D
> >face=3D3D3DArial=3D20
> > size=3D3D3D2>Anyone know=3D20
> > Deej?</FONT></DIV><BR>><DIV><FONT =3D
> >face=3D3D3DArial=3D20
> > size=3D3D3D2></FONT> </DIV><BR>><DIV><FONT =3D
> >face=3D3D3DArial=3D20
> > size=3D3D3D2>Also I have to find the pin config for<BR>=3D3D<BR>>a
=
>=3D
> >56=3D20
> > pin=3D3D20<BR>>EDAC/ELCO=3D20
> > ADAT</FONT></DIV><BR>><DIV><FONT =3D
> >face=3D3D3DArial=3D20
> > size=3D3D3D2>connector. I want to chop this =3D3D<BR>>bad boy =3D
> >off=3D3D20<BR>>and=3D20
> > solder 16 TRS</FONT></DIV><BR>><DIV><FONT =3D
> >face=3D3D3DArial=3D20
> > size=3D3D3D2>to it. Anyone know whether the =3D3D<BR>>ADAT =
>wiring=3D20
> > is=3D3D20<BR>>different=3D20
> > than</FONT></DIV><BR>><DIV><FONT =3D
> >face=3D3D3DArial=3D20
> > =3D
> >size=3D3D3D2>standard?</FONT></DIV><BR>><DIV><FO=3D
> >NT=3D20
> > face=3D3D3DArial=3D20
> > =3D
> >size=3D3D3D2>Thanks,</FONT></DIV><BR>><DIV><FONT=3D
> >=3D20
> > face=3D3D3DArial=3D20
> > size=3D3D3D2>Tom</FONT></DIV><BR>><DIV><FONT=3D20
> > face=3D3D3DArial size=3D3D3D2></FONT> =3D
> ></DIV><BR>><DIV><FONT=3D20
> > face=3D3D3DArial size=3D3D3D2></FONT> =3D
> ></DIV><BR>><DIV><FONT=3D20
> > size=3D3D3D2><BR><BR>I choose Polesoft Lockspam to fight =3D
> >spam,=3D20
> > =3D
> >=3D3D<BR>>and=3D3D20<BR>>you?<BR><A=3D3D20<BR>>href=3D3D3D "<A=3D20
> > =3D
> =
>>href=3D3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/re=
>fer=3D
> =
>>'>http://www.polesoft.com/refer.html">http://www.polesoft.com/refer</A=3D=
>
> >>=3D3D<BR>>.html</A>=3D20
> > =3D
> ></FONT></DIV></BODY></HTML><BR>><BR>><BR></=3D
> >BLOCKQUOTE></BODY></HTML>
> >
> >
>
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3DContent-Type content=3D"text/html; =
>charset=3Diso-8859-1">
><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D#ffffff>
><DIV><FONT face=3DArial size=3D2>What do you guys think,</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>What are my chances of getting two 442s
=
>in the=20
>mix</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>without my Mecs losing some of=20
>their cards?</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>T.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><BLOCKQUOTE=20
>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Rod Lincoln" <<A=20
> =
>href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&g=
>t;=20
> wrote in message <A=20
> =
>href=3D"news:46453f51$1@linux">news:46453f51$1@linux</A>...</DIV><BR>Mec
=
>1 on=20
> card A, 442 on Card B, Mec 2 on Card F (my last card)<BR>I'm running =
>spdif out=20
> of Mec 1 to a DAC 1<BR>Rod<BR>"Tom Bruhl" <<A=20
> href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=20
> wrote:<BR>><BR>><BR>>Hey Rod,<BR>>That sounds =
>promising. =20
> What cards do you have the<BR>>Mecs and 442 connected=20
> to?<BR>>Tom<BR>><BR>><BR>> "Rod Lincoln" <<A=20
> =
>href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&g=
>t;=20
> wrote in message =
>=3D<BR>>news:46451438$1@linux...<BR>><BR>> I've=20
> got 2 mecs and a 442 working here, no problems at all.<BR>> =
>I'm also=20
> clocking with the old Lucid genX word clock. 5 modules in=20
> one<BR>=3D<BR>>mec,<BR>> 4 modules in the other. 1 adat =
>card each. 6=20
> eds cards, 3 UAD cards, =3D<BR>>all in<BR>> a magma. Oh =
>yeah, a Lynx=20
> one in the computer also.<BR>> Rod<BR>> "Tom Bruhl" =
><<A=20
> href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=20
> wrote:<BR>> ><BR>> ><BR>> >I'll be =
>buying=20
> either two MECs or two 442s but don't want it<BR>> >to =
>mess my=20
> whole rig up if the 442s don't play nice.<BR>> >I am using =
>an=20
> older Lucid clock now with 2 Mecs already.<BR>> >They each =
>have=20
> five modules in them. The others may<BR>> >see a =
>single ADAT=20
> at most someday maybe.<BR>> ><BR>> >I can make =
>the=20
> MECs fit in the machine room with the others<BR>> >but the =
>442s=20
> would be a lot easier.<BR>> ><BR>> >Anyone =
>know=20
> Deej?<BR>> ><BR>> >Also I have to find the pin =
>config=20
> for a 56 pin EDAC/ELCO ADAT<BR>> >connector. I want =
>to chop=20
> this bad boy off and solder 16 TRS<BR>> >to it. =
>Anyone know=20
> whether the ADAT wiring is different than<BR>> =20
> >standard?<BR>> >Thanks,<BR>> =
>>Tom<BR>> =20
> ><BR>> ><BR>> ><BR>> =
>><BR>> =20
> >I choose Polesoft Lockspam to fight spam, and you?<BR>> =20
> >http://www.polesoft.com/refer.html =3D20<BR>> =20
> ><BR>> ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0=20
> Transitional//EN"><BR>> =
>><HTML><HEAD><BR>> =20
> ><META http-equiv=3D3D3DContent-Type content=3D3D3D"text/html;=20
> =3D3D<BR>> >charset=3D3D3Diso-8859-1"><BR>> =
>><META=20
> content=3D3D3D"MSHTML 6.00.2800.1400" =
>name=3D3D3DGENERATOR><BR>> =20
> ><STYLE></STYLE><BR>> =
>></HEAD><BR>> =20
> ><BODY bgColor=3D3D3D#ffffff><BR>> =
>><DIV><FONT=20
> face=3D3D3DArial size=3D3D3D2>I'll be buying either two MECs =
>=3D<BR>>or two=20
> =3D3D<BR>> >442s but=3D3D20<BR>> >don't want=20
> it</FONT></DIV><BR>> ><DIV><FONT=20
> face=3D3D3DArial size=3D3D3D2>to mess my whole rig up if the =
>=3D<BR>>442s=20
> =3D3D<BR>> >don't play=3D3D20<BR>> =20
> >nice.</FONT></DIV><BR>> =
>><DIV><FONT=20
> face=3D3D3DArial size=3D3D3D2>I am using an older Lucid =
>clock<BR>=3D<BR>>now=20
> =3D3D<BR>> >with 2 Mecs=3D3D20<BR>> =20
> >already.</FONT></DIV><BR>> =
>><DIV><FONT=20
> face=3D3D3DArial size=3D3D3D2>They each have five modules in=20
> =3D<BR>>=3D3D<BR>> >them. The=3D3D20<BR>> =
>>others=20
> may</FONT></DIV><BR>> ><DIV><FONT=20
> face=3D3D3DArial size=3D3D3D2>see a single ADAT at most=20
> =3D<BR>>someday=3D3D20<BR>> =20
> >maybe.</FONT></DIV><BR>> =
>><DIV><FONT=20
> face=3D3D3DArial size=3D3D3D2></FONT> =
></DIV><BR>> =20
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>I can make =
>the MECs fit=20
> in the =3D<BR>>machine<BR>> =3D3D<BR>> >room=20
> with=3D3D20<BR>> >the =
>others</FONT></DIV><BR>> =20
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>but the 442s =
>would be=20
> =3D<BR>></FONT><FONT =3D3D<BR>> =20
> >face=3D3D3DArial=3D3D20<BR>> >size=3D3D3D2>a lot=20
> easier.</FONT></DIV><BR>> ><DIV><FONT =
>
> face=3D3D3DArial size=3D3D3D2></FONT> =
></DIV><BR>> =20
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Anyone know=20
> Deej?</FONT></DIV><BR>> ><DIV><FONT=20
> face=3D3D3DArial size=3D3D3D2></FONT> =
></DIV><BR>> =20
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Also I have =
>to find the=20
> pin =3D<BR>>config for<BR>> =3D3D<BR>> >a 56=20
> pin=3D3D20<BR>> >EDAC/ELCO=20
> ADAT</FONT></DIV><BR>> ><DIV><FONT=20
> face=3D3D3DArial size=3D3D3D2>connector. I want to chop this=20
> =3D<BR>>=3D3D<BR>> >bad boy off=3D3D20<BR>> =
>>and solder=20
> 16 TRS</FONT></DIV><BR>> ><DIV><FONT=20
> face=3D3D3DArial size=3D3D3D2>to it. Anyone know whether the=20
> =3D<BR>>=3D3D<BR>> >ADAT wiring is=3D3D20<BR>> =
>>different=20
> than</FONT></DIV><BR>> ><DIV><FONT=20
> face=3D3D3DArial =
>size=3D3D3D2>standard?</FONT></DIV><BR>> =20
> ><DIV><FONT face=3D3D3DArial=20
> size=3D3D3D2>Thanks,</FONT></DIV><BR>> =20
> ><DIV><FONT face=3D3D3DArial=20
> size=3D3D3D2>Tom</FONT></DIV><BR>> =20
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> =
>
> </DIV><BR>> ><DIV><FONT face=3D3D3DArial=20
> size=3D3D3D2></FONT> </DIV><BR>> =
>><DIV><FONT=20
> size=3D3D3D2><BR><BR>I choose Polesoft Lockspam to =
>fight=20
> =3D<BR>>spam, =3D3D<BR>> >and=3D3D20<BR>> =20
> >you?<BR><A=3D3D20<BR>> =
>=3D<BR>>>href=3D3D3D"<A=20
> =
>href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/re'>h=
>ttp://www.polesoft.com/refer.html">http://www.polesoft.com/re</A>=3D<B=
>R>>fer=3D3D<BR>> =20
> >.html</A>=20
> </FONT></DIV></BODY></HTML><BR>> =20
> ><BR>> ><BR>><BR>><BR>><!DOCTYPE HTML =
>PUBLIC=20
> "-//W3C//DTD HTML 4.0=20
> Transitional//EN"><BR>><HTML><HEAD><BR>><META=20
> http-equiv=3D3DContent-Type content=3D3D"text/html;=20
> =3D<BR>>charset=3D3Diso-8859-1"><BR>><META =
>content=3D3D"MSHTML=20
> 6.00.2800.1400"=20
> =
>name=3D3DGENERATOR><BR>><STYLE></STYLE><BR>></HEA=
>D><BR>><BODY=20
> bgColor=3D3D#ffffff><BR>><DIV><FONT face=3D3DArial =
>size=3D3D2>Hey=20
> Rod,</FONT></DIV><BR>><DIV><FONT =
>face=3D3DArial=20
> size=3D3D2>That sounds promising. What cards =3D<BR>>do you=20
> =
>have=3D20<BR>>the</FONT></DIV><BR>><DIV><FONT =
>
> face=3D3DArial size=3D3D2>Mecs and 442 connected=20
> to?</FONT></DIV><BR>><DIV><FONT face=3D3DArial =
>
> size=3D3D2>Tom</FONT></DIV><BR>><DIV><FONT=20
> face=3D3DArial size=3D3D2></FONT> =
></DIV><BR>><DIV>=20
> =
></DIV><BR>><BLOCKQUOTE=3D20<BR>>style=3D3D"PADDING-RIGHT: =
>0px;=20
> PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =3D<BR>>BORDER-LEFT: #000000 =
>2px solid;=20
> MARGIN-RIGHT: 0px"><BR>> <DIV>"Rod Lincoln"=20
> <<A=3D20<BR>> =3D<BR>>href=3D3D"<A=20
> =
>href=3D'mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&a=
>mp;g'>mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</=
>A>&g</A>=3D<BR>>t;=3D20<BR>> =20
> wrote in message <A=3D20<BR>> =3D<BR>>href=3D3D"<A=20
> =
>href=3D"news:46451438$1@linux">news:46451438$1@linux</A>...</DIV><BR=
>>I've">news:46451438$1@linux">news:46451438$1@linux</A>...</D=
>IV><BR>I've</A>=3D<BR>>=20
> got 2=3D20<BR>> mecs and a 442 working here, no problems at=20
> all.<BR>I'm also clocking<BR>=3D<BR>>with =
>the=3D20<BR>> old=20
> Lucid genX word clock. 5 modules in one mec,<BR>4 modules in the =
>
> =3D<BR>>other. 1=3D20<BR>> adat card each. 6 eds cards, 3 =
>UAD cards,=20
> all in<BR>a magma. Oh yeah,<BR>=3D<BR>>a =
>Lynx=3D20<BR>> one in=20
> the computer also.<BR>Rod<BR>"Tom Bruhl"=20
> <<A=3D20<BR>> href=3D3D"<A=20
> =
>href=3D'mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20'>mailto=
>:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20</A><BR>&g=
>t; =20
> wrote:<BR>><BR>><BR>>I'll be buying either =
>two MECs=20
> or two =3D<BR>>442s but=3D20<BR>> don't want =
>it<BR>>to mess=20
> my whole rig up if the 442s don't play=3D20<BR>> =
>nice.<BR>>I=20
> am using an older Lucid clock now with 2 Mecs=3D20<BR>> =20
> already.<BR>>They each have five modules in them. The=20
> others=3D20<BR>> may<BR>>see a single ADAT at most =
>someday=20
> maybe.<BR>><BR>>I =3D<BR>>can =
>make=3D20<BR>> the=20
> MECs fit in the machine room with the others<BR>>but the 442s =
>
> =3D<BR>>would be=3D20<BR>> a lot=20
> easier.<BR>><BR>>Anyone know=20
> Deej?<BR>><BR>>Also I =3D<BR>>have =
>to=3D20<BR>> find=20
> the pin config for a 56 pin EDAC/ELCO =
>=3D<BR>>ADAT<BR>>connector. I=20
> want=3D20<BR>> to chop this bad boy off and solder 16=20
> TRS<BR>>to it. Anyone =3D<BR>>know=3D20<BR>> =
>whether the ADAT=20
> wiring is different=3D20<BR>> =20
> =
>=3D<BR>>than<BR>>standard?<BR>>Thanks,<BR>>=
>Tom<BR>><BR>><BR>><B=3D<BR>>R>><=
>;BR>>I=3D20<BR>> =20
> choose Polesoft Lockspam to fight spam, and=3D20<BR>> =20
> you?<BR>>http://www.polesoft.com/refer.html =
>=3D20<BR>> =20
> <BR>><BR>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML =
>
> 4.0=3D20<BR>> =20
> =
>Transitional//EN"><BR>><HTML><HEAD><BR>>=
><META=3D20<BR>> =20
> http-equiv=3D3D3DContent-Type =
>content=3D3D3D"text/html;=3D20<BR>> =20
> =3D3D<BR>>charset=3D3D3Diso-8859-1"><BR>><META =
>
> =3D<BR>>content=3D3D3D"MSHTML=3D20<BR>> =
>6.00.2800.1400"=3D20<BR>> =20
> =
>=3D<BR>>name=3D3D3DGENERATOR><BR>><STYLE></STYLE&=
>gt;<BR>></HEA=3D<BR>>D><BR>><BODY=3D20<BR>&=
>gt; =20
> bgColor=3D3D3D#ffffff><BR>><DIV><FONT =
>face=3D3D3DArial=20
> =3D<BR>>size=3D3D3D2>I'll=3D20<BR>> be buying either =
>two MECs or two=20
> =3D3D<BR>>442s but=3D3D20<BR>>don't=20
> =3D<BR>>want=3D20<BR>> =20
> it</FONT></DIV><BR>><DIV><FONT=20
> face=3D3D3DArial=3D20<BR>> size=3D3D3D2>to mess my whole =
>rig up if the=20
> 442s =3D3D<BR>>don't=3D20<BR>> =20
> =
>=3D<BR>>play=3D3D20<BR>>nice.</FONT></DIV><BR&=
>gt;><DIV><FON=3D<BR>>T=3D20<BR>> =20
> face=3D3D3DArial size=3D3D3D2>I am using an older Lucid clock now=20
> =3D<BR>>=3D3D<BR>>with 2=3D20<BR>> =20
> =
>
=3D<BR>>Mecs=3D3D20<BR>>already.</FONT></DIV><=
>BR>><DIV><=3D<BR>>FONT=3D20<BR>> =20
> face=3D3D3DArial size=3D3D3D2>They each have five modules in=20
> =3D<BR>>=3D3D<BR>>them.=3D20<BR>> =
>The=3D3D20<BR>>others=20
> =
>=3D<BR>>may</FONT></DIV><BR>><DIV><FONT=3D=
>20<BR>> =20
> face=3D3D3DArial size=3D3D3D2>see a single ADAT at =
>most=3D20<BR>> =20
> =
>=3D<BR>>someday=3D3D20<BR>>maybe.</FONT></DIV><=
>;BR>><DIV><=3D<BR>>;FONT=3D20<BR>> =20
> face=3D3D3DArial size=3D3D3D2></FONT>=20
> =
>=3D<BR>></DIV><BR>><DIV><FONT=3D20<BR>>&nbs=
>p;=20
> face=3D3D3DArial size=3D3D3D2>I can make the MECs fit in =
>the=3D20<BR>> =20
> machine<BR>=3D3D<BR>>room=20
> with=3D3D20<BR>>the=3D20<BR>> =20
> others</FONT></DIV><BR>><DIV><FONT=20
> =3D<BR>>face=3D3D3DArial=3D20<BR>> size=3D3D3D2>but the =
>442s would be=20
> </FONT><FONT=3D20<BR>> =20
> =
>=3D3D<BR>>face=3D3D3DArial=3D3D20<BR>>size=3D3D3D2>a=
>=20
> lot=3D20<BR>> =20
> easier.</FONT></DIV><BR>><DIV><FONT=20
> =3D<BR>>face=3D3D3DArial=3D20<BR>> =
>size=3D3D3D2></FONT>=20
> </DIV><BR>><DIV><FONT=20
> =3D<BR>>face=3D3D3DArial=3D20<BR>> size=3D3D3D2>Anyone=20
> know=3D20<BR>> =20
> Deej?</FONT></DIV><BR>><DIV><FONT=20
> =3D<BR>>face=3D3D3DArial=3D20<BR>> =
>size=3D3D3D2></FONT>=20
> </DIV><BR>><DIV><FONT=20
> =3D<BR>>face=3D3D3DArial=3D20<BR>> size=3D3D3D2>Also I =
>have to find the=20
> pin config for<BR>=3D3D<BR>>a =
>=3D<BR>>56=3D20<BR>> =20
> pin=3D3D20<BR>>EDAC/ELCO=3D20<BR>> =20
> ADAT</FONT></DIV><BR>><DIV><FONT=20
> =3D<BR>>face=3D3D3DArial=3D20<BR>> =
>size=3D3D3D2>connector. I want to=20
> chop this =3D3D<BR>>bad boy=20
> =3D<BR>>off=3D3D20<BR>>and=3D20<BR>> solder 16=20
> TRS</FONT></DIV><BR>><DIV><FONT=20
> =3D<BR>>face=3D3D3DArial=3D20<BR>> size=3D3D3D2>to it. =
>Anyone know=20
> whether the =3D3D<BR>>ADAT wiring=3D20<BR>> =20
> is=3D3D20<BR>>different=3D20<BR>> =20
> than</FONT></DIV><BR>><DIV><FONT=20
> =3D<BR>>face=3D3D3DArial=3D20<BR>> =20
> =
>=3D<BR>>size=3D3D3D2>standard?</FONT></DIV><BR>&g=
>t;<DIV><FO=3D<BR>>NT=3D20<BR>> =20
> face=3D3D3DArial=3D20<BR>> =20
> =
>=3D<BR>>size=3D3D3D2>Thanks,</FONT></DIV><BR>>=
><DIV><FONT=3D<BR>>=3D20<BR>> =20
> face=3D3D3DArial=3D20<BR>> =20
> =
>size=3D3D3D2>Tom</FONT></DIV><BR>><DIV><=
>FONT=3D20<BR>> =20
> face=3D3D3DArial size=3D3D3D2></FONT>=20
> =
>=3D<BR>></DIV><BR>><DIV><FONT=3D20<BR>>&nbs=
>p;=20
> face=3D3D3DArial size=3D3D3D2></FONT>=20
> =
>=3D<BR>></DIV><BR>><DIV><FONT=3D20<BR>>&nbs=
>p;=20
> size=3D3D3D2><BR><BR>I choose Polesoft Lockspam to =
>fight=20
> =3D<BR>>spam,=3D20<BR>> =20
> =
>=3D<BR>>=3D3D<BR>>and=3D3D20<BR>>you?<BR><A=
>=3D3D20<BR>>href=3D3D3D"<A=3D20<BR>> =20
> =
>=3D<BR>>href=3D3D'http://www.polesoft.com/refer.html">http://www.po=
>lesoft.com/refer=3D<BR>>'>http://www.polesoft.com/refer.html">ht=
>tp://www.polesoft.com/refer</A=3D<BR>>>=3D3D<BR>>.html&=
>lt;/A>=3D20<BR>> =20
> =
>=3D<BR>></FONT></DIV></BODY></HTML><BR>&=
>gt;<BR>><BR></=3D<BR>>BLOCKQUOTE></BODY><=
>;/HTML><BR>><BR>><BR></BLOCKQUOTE></BODY></HTML>
>
>
|
|
|
|
| Re: Paris 3.0/XP MECs and 442s work nicely or no? Also Elco pin out. . . [message #84384 is a reply to message #84380] |
Sat, 12 May 2007 00:21 |
Tom Bruhl
Messages: 1368
Registered: June 2007
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_00EA_01C79444.9A6648B0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
I don't know but I'd say it's an XP 3.0 problem. As deej said
it has alot to do with Paris booting up and recognizing all the
hardware correctly.
I helped my friend refine his Chris Ludwig XP computer (a real monster!)
and was surprised at the time it took to analyze the hardware at start =
up.
It was slower than mine but always worked perfectly. He has external
clock, 2 Mecs with 2 ADATs, 8 in, 8 out in each !!! I personally think =
it has=20
alot to do with the first install of Paris and what hardware is onboard =
the MECS=20
at the time. Chris is a genius though. That might have something to do =
with it...
By the way did you read the email I sent you back? can you respond to =
this:
When Paris doesn't start properly it sometimes gives an error with =
FxPansion. =20
I probably have a rogue plugin that doesn't want to play nice.
Any easy suggestions beside disabling DX? I think FxPansion is scanning
Waves Gold Bundle and Antares Autotune. Maybe that's it? =20
Tom
"Dimitrios" <musurgio@otenet.gr> wrote in message =
news:46456534$1@linux...
Hi Tom,
When I tried this 442 and mec combination I only found a working =
clocked
system if 442 was a master so 20 bits versus 24 was inportant to me =
for monitoring
! (I still record only 16 bits !).
What though was evident is that I could NEVER have the ins and outs of =
442
working correctly.
You know sometimes we use 442 along mec and we mostly don't use much =
of 442
except for a spdif or something.
It would be nice if someone could CHECK that in a multi mec 442 system =
ALL
442's ins and outs along with mec's are working correctly.
I know this is much to ask but Tom (and I at least) would love that =
kind
of testing info.
A 442 would be a great addition to me IF mec could be main card A and =
all
ins and outs of everything would work.
Is this an XP problem or is it the same as in win98 or Me ?
Regards,
Dimitrios
"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>What do you guys think,
>What are my chances of getting two 442s in the mix
>without my Mecs losing some of their cards?
>T.
>
> "Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message =3D
>news:46453f51$1@linux...
>
> Mec 1 on card A, 442 on Card B, Mec 2 on Card F (my last card)
> I'm running spdif out of Mec 1 to a DAC 1
> Rod
> "Tom Bruhl" <arpegio@comcast.net> wrote:
> >
> >
> >Hey Rod,
> >That sounds promising. What cards do you have the
> >Mecs and 442 connected to?
> >Tom
> >
> >
> > "Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message =3D3D
> >news:46451438$1@linux...
> >
> > I've got 2 mecs and a 442 working here, no problems at all.
> > I'm also clocking with the old Lucid genX word clock. 5 modules =
in
=3D
>one
> =3D3D
> >mec,
> > 4 modules in the other. 1 adat card each. 6 eds cards, 3 UAD =
cards,
=3D
>=3D3D
> >all in
> > a magma. Oh yeah, a Lynx one in the computer also.
> > Rod
> > "Tom Bruhl" <arpegio@comcast.net> wrote:
> > >
> > >
> > >I'll be buying either two MECs or two 442s but don't want it
> > >to mess my whole rig up if the 442s don't play nice.
> > >I am using an older Lucid clock now with 2 Mecs already.
> > >They each have five modules in them. The others may
> > >see a single ADAT at most someday maybe.
> > >
> > >I can make the MECs fit in the machine room with the others
> > >but the 442s would be a lot easier.
> > >
> > >Anyone know Deej?
> > >
> > >Also I have to find the pin config for a 56 pin EDAC/ELCO ADAT
> > >connector. I want to chop this bad boy off and solder 16 TRS
> > >to it. Anyone know whether the ADAT wiring is different than
> > >standard?
> > >Thanks,
> > >Tom
> > >
> > >
> > >
> > >
> > >I choose Polesoft Lockspam to fight spam, and you?
> > >http://www.polesoft.com/refer.html =3D3D20
> > >
> > ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
> > ><HTML><HEAD>
> > ><META http-equiv=3D3D3D3DContent-Type =
content=3D3D3D3D"text/html; =3D
>=3D3D3D
> > >charset=3D3D3D3Diso-8859-1">
> > ><META content=3D3D3D3D"MSHTML 6.00.2800.1400" =
name=3D3D3D3DGENERATOR>
> > ><STYLE></STYLE>
> > ></HEAD>
> > ><BODY bgColor=3D3D3D3D#ffffff>
> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>I'll be buying =
either two
=3D
>MECs =3D3D
> >or two =3D3D3D
> > >442s but=3D3D3D20
> > >don't want it</FONT></DIV>
> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>to mess my whole =
rig up =3D
>if the =3D3D
> >442s =3D3D3D
> > >don't play=3D3D3D20
> > >nice.</FONT></DIV>
> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>I am using an =
older Lucid
=3D
>clock
> =3D3D
> >now =3D3D3D
> > >with 2 Mecs=3D3D3D20
> > >already.</FONT></DIV>
> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>They each have =
five =3D
>modules in =3D3D
> >=3D3D3D
> > >them. The=3D3D3D20
> > >others may</FONT></DIV>
> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>see a single ADAT =
at most
=3D
>=3D3D
> >someday=3D3D3D20
> > >maybe.</FONT></DIV>
> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2></FONT> </DIV>
> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>I can make the =
MECs fit =3D
>in the =3D3D
> >machine
> > =3D3D3D
> > >room with=3D3D3D20
> > >the others</FONT></DIV>
> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>but the 442s would =
be =3D3D
> ></FONT><FONT =3D3D3D
> > >face=3D3D3D3DArial=3D3D3D20
> > >size=3D3D3D3D2>a lot easier.</FONT></DIV>
> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2></FONT> </DIV>
> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>Anyone know =3D
>Deej?</FONT></DIV>
> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2></FONT> </DIV>
> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>Also I have to =
find the =3D
>pin =3D3D
> >config for
> > =3D3D3D
> > >a 56 pin=3D3D3D20
> > >EDAC/ELCO ADAT</FONT></DIV>
> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>connector. I want =
to chop
=3D
>this =3D3D
> >=3D3D3D
> > >bad boy off=3D3D3D20
> > >and solder 16 TRS</FONT></DIV>
> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>to it. Anyone know =
=3D
>whether the =3D3D
> >=3D3D3D
> > >ADAT wiring is=3D3D3D20
> > >different than</FONT></DIV>
> > ><DIV><FONT face=3D3D3D3DArial =
size=3D3D3D3D2>standard?</FONT></DIV>
> > ><DIV><FONT face=3D3D3D3DArial =
size=3D3D3D3D2>Thanks,</FONT></DIV>
> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>Tom</FONT></DIV>
> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2></FONT> </DIV>
> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2></FONT> </DIV>
> > ><DIV><FONT size=3D3D3D3D2><BR><BR>I choose Polesoft Lockspam to =
=3D
>fight =3D3D
> >spam, =3D3D3D
> > >and=3D3D3D20
> > >you?<BR><A=3D3D3D20
> > =3D3D
> =3D
=
>>>href=3D3D3D3D"http://www.polesoft.com/refer.html">http://www.polesoft.=
com=3D
>/re=3D3D
> >fer=3D3D3D
> > >.html</A> </FONT></DIV></BODY></HTML>
> > >
> > >
> >
> >
> ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
> ><HTML><HEAD>
> ><META http-equiv=3D3D3DContent-Type content=3D3D3D"text/html; =
=3D3D
> >charset=3D3D3Diso-8859-1">
> ><META content=3D3D3D"MSHTML 6.00.2800.1400" name=3D3D3DGENERATOR>
> ><STYLE></STYLE>
> ></HEAD>
> ><BODY bgColor=3D3D3D#ffffff>
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Hey Rod,</FONT></DIV>
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>That sounds promising. =
What =3D
>cards =3D3D
> >do you have=3D3D20
> >the</FONT></DIV>
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Mecs and 442 connected =
=3D
>to?</FONT></DIV>
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Tom</FONT></DIV>
> ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
> ><DIV> </DIV>
> ><BLOCKQUOTE=3D3D20
> >style=3D3D3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: =
5px; =3D
>=3D3D
> >BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> > <DIV>"Rod Lincoln" <<A=3D3D20
> > =3D3D
> =3D
=
>>href=3D3D3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com=
</A=3D
>>&g=3D3D
> >t;=3D3D20
> > wrote in message <A=3D3D20
> > =3D3D
> =3D
=
>>href=3D3D3D"news:46451438$1@linux">news:46451438$1@linux</A>...</DIV><B=
R>I=3D
>'ve=3D3D
> > got 2=3D3D20
> > mecs and a 442 working here, no problems at all.<BR>I'm also =3D
>clocking
> =3D3D
> >with the=3D3D20
> > old Lucid genX word clock. 5 modules in one mec,<BR>4 modules in =
=3D
>the =3D3D
> >other. 1=3D3D20
> > adat card each. 6 eds cards, 3 UAD cards, all in<BR>a magma. Oh =
=3D
>yeah,
> =3D3D
> >a Lynx=3D3D20
> > one in the computer also.<BR>Rod<BR>"Tom Bruhl" <<A=3D3D20
> > =
href=3D3D3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D3D20
> > wrote:<BR>><BR>><BR>>I'll be buying either two MECs or two =3D3D
> >442s but=3D3D20
> > don't want it<BR>>to mess my whole rig up if the 442s don't =3D
>play=3D3D20
> > nice.<BR>>I am using an older Lucid clock now with 2 Mecs=3D3D20
> > already.<BR>>They each have five modules in them. The =
others=3D3D20
> > may<BR>>see a single ADAT at most someday maybe.<BR>><BR>>I =
=3D3D
> >can make=3D3D20
> > the MECs fit in the machine room with the others<BR>>but the =
442s =3D
>=3D3D
> >would be=3D3D20
> > a lot easier.<BR>><BR>>Anyone know Deej?<BR>><BR>>Also I =3D3D
> >have to=3D3D20
> > find the pin config for a 56 pin EDAC/ELCO =3D3D
> >ADAT<BR>>connector. I want=3D3D20
> > to chop this bad boy off and solder 16 TRS<BR>>to it. Anyone =
=3D3D
> >know=3D3D20
> > whether the ADAT wiring is different=3D3D20
> > =3D3D
> >than<BR>>standard?<BR>>Thanks,<BR>>Tom<BR>><BR>><BR >><B=3D3D
> >R>><BR>>I=3D3D20
> > choose Polesoft Lockspam to fight spam, and=3D3D20
> > you?<BR>>http://www.polesoft.com/refer.html =3D3D20
> > <BR>><BR>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0=3D3D20
> > Transitional//EN"><BR>><HTML><HEAD><BR>><META=3D3D20
> > http-equiv=3D3D3D3DContent-Type =
content=3D3D3D3D"text/html;=3D3D20
> > =3D3D3D<BR>>charset=3D3D3D3Diso-8859-1"><BR>><META =3D3D
> >content=3D3D3D3D"MSHTML=3D3D20
> > 6.00.2800.1400"=3D3D20
> > =3D3D
> >name=3D3D3D3DGENERATOR><BR>><STYLE></STYLE><BR>></HEA=3D3D
> >D><BR>><BODY=3D3D20
> > bgColor=3D3D3D3D#ffffff><BR>><DIV><FONT face=3D3D3D3DArial =3D3D
> >size=3D3D3D3D2>I'll=3D3D20
> > be buying either two MECs or two =3D3D3D<BR>>442s =3D
>but=3D3D3D20<BR>>don't =3D3D
> >want=3D3D20
> > it</FONT></DIV><BR>><DIV><FONT face=3D3D3D3DArial=3D3D20
> > size=3D3D3D3D2>to mess my whole rig up if the 442s =3D
>=3D3D3D<BR>>don't=3D3D20
> > =3D3D
> >play=3D3D3D20<BR>>nice.</FONT></DIV><BR>><DIV><FON=3D3D
> >T=3D3D20
> > face=3D3D3D3DArial size=3D3D3D3D2>I am using an older Lucid =
clock now =3D
>=3D3D
> >=3D3D3D<BR>>with 2=3D3D20
> > =3D3D
> >Mecs=3D3D3D20<BR>>already.</FONT></DIV><BR>><DIV><=3D3D
> >FONT=3D3D20
> > face=3D3D3D3DArial size=3D3D3D3D2>They each have five modules in =
=3D3D
> >=3D3D3D<BR>>them.=3D3D20
> > The=3D3D3D20<BR>>others =3D3D
> >may</FONT></DIV><BR>><DIV><FONT=3D3D20
> > face=3D3D3D3DArial size=3D3D3D3D2>see a single ADAT at =
most=3D3D20
> > =3D3D
> >someday=3D3D3D20<BR>>maybe.</FONT></DIV><BR>><DIV><=3D3D
> >;FONT=3D3D20
> > face=3D3D3D3DArial size=3D3D3D3D2></FONT> =3D3D
> ></DIV><BR>><DIV><FONT=3D3D20
> > face=3D3D3D3DArial size=3D3D3D3D2>I can make the MECs fit in =
the=3D3D20
> > machine<BR>=3D3D3D<BR>>room with=3D3D3D20<BR>>the=3D3D20
> > others</FONT></DIV><BR>><DIV><FONT =3D3D
> >face=3D3D3D3DArial=3D3D20
> > size=3D3D3D3D2>but the 442s would be </FONT><FONT=3D3D20
> > =3D3D3D<BR>>face=3D3D3D3DArial=3D3D3D20<BR>>size=3D3D3D3D2 >a =
lot=3D3D20
> > easier.</FONT></DIV><BR>><DIV><FONT =3D3D
> >face=3D3D3D3DArial=3D3D20
> > size=3D3D3D3D2></FONT> </DIV><BR>><DIV><FONT =3D3D
> >face=3D3D3D3DArial=3D3D20
> > size=3D3D3D3D2>Anyone know=3D3D20
> > Deej?</FONT></DIV><BR>><DIV><FONT =3D3D
> >face=3D3D3D3DArial=3D3D20
> > size=3D3D3D3D2></FONT> </DIV><BR>><DIV><FONT =3D3D
> >face=3D3D3D3DArial=3D3D20
> > size=3D3D3D3D2>Also I have to find the pin config =
for<BR>=3D3D3D<BR>>a
=3D
>=3D3D
> >56=3D3D20
> > pin=3D3D3D20<BR>>EDAC/ELCO=3D3D20
> > ADAT</FONT></DIV><BR>><DIV><FONT =3D3D
> >face=3D3D3D3DArial=3D3D20
> > size=3D3D3D3D2>connector. I want to chop this =3D3D3D<BR>>bad =
boy =3D3D
> >off=3D3D3D20<BR>>and=3D3D20
> > solder 16 TRS</FONT></DIV><BR>><DIV><FONT =3D3D
> >face=3D3D3D3DArial=3D3D20
> > size=3D3D3D3D2>to it. Anyone know whether the =3D3D3D<BR>>ADAT =
=3D
>wiring=3D3D20
> > is=3D3D3D20<BR>>different=3D3D20
> > than</FONT></DIV><BR>><DIV><FONT =3D3D
> >face=3D3D3D3DArial=3D3D20
> > =3D3D
> >size=3D3D3D3D2>standard?</FONT></DIV><BR>><DIV><FO=3D3D
> >NT=3D3D20
> > face=3D3D3D3DArial=3D3D20
> > =3D3D
> >size=3D3D3D3D2>Thanks,</FONT></DIV><BR>><DIV><FONT=3D3D
> >=3D3D20
> > face=3D3D3D3DArial=3D3D20
> > size=3D3D3D3D2>Tom</FONT></DIV><BR>><DIV><FONT=3D3D20
> > face=3D3D3D3DArial size=3D3D3D3D2></FONT> =3D3D
> ></DIV><BR>><DIV><FONT=3D3D20
> > face=3D3D3D3DArial size=3D3D3D3D2></FONT> =3D3D
> ></DIV><BR>><DIV><FONT=3D3D20
> > size=3D3D3D3D2><BR><BR>I choose Polesoft Lockspam to fight =3D3D
> >spam,=3D3D20
> > =3D3D
> =
>=3D3D3D<BR>>and=3D3D3D20<BR>>you?<BR><A=3D3D3D20<BR> >href=3D3D3D3D"<A=3D=
3D20
> > =3D3D
> =3D
=
>>href=3D3D3D'http://www.polesoft.com/refer.html">http://www.polesoft.com=
/re=3D
>fer=3D3D
> =3D
=
>>'>http://www.polesoft.com/refer.html">http://www.polesoft.com/refer</A=3D=
3D=3D
>
> >>=3D3D3D<BR>>.html</A>=3D3D20
> > =3D3D
> ></FONT></DIV></BODY></HTML><BR>><BR>><BR></=3D3D
> >BLOCKQUOTE></BODY></HTML>
> >
> >
>
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3D3DContent-Type content=3D3D"text/html; =3D
>charset=3D3Diso-8859-1">
><META content=3D3D"MSHTML 6.00.2800.1400" name=3D3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D3D#ffffff>
><DIV><FONT face=3D3DArial size=3D3D2>What do you guys =
think,</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>What are my chances of getting =
two 442s
=3D
>in the=3D20
>mix</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>without my Mecs losing some =
of=3D20
>their cards?</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>T.</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
><BLOCKQUOTE=3D20
>style=3D3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
=3D
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Rod Lincoln" <<A=3D20
> =3D
=
>href=3D3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A=
>&g=3D
>t;=3D20
> wrote in message <A=3D20
> =3D
=
>href=3D3D"news:46453f51$1@linux">news:46453f51$1@linux</A>...</DIV><BR>M=
ec
=3D
>1 on=3D20
> card A, 442 on Card B, Mec 2 on Card F (my last card)<BR>I'm =
running =3D
>spdif out=3D20
> of Mec 1 to a DAC 1<BR>Rod<BR>"Tom Bruhl" <<A=3D20
> href=3D3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20
> wrote:<BR>><BR>><BR>>Hey Rod,<BR>>That sounds =3D
>promising. =3D20
> What cards do you have the<BR>>Mecs and 442 connected=3D20
> to?<BR>>Tom<BR>><BR>><BR>> "Rod Lincoln" <<A=3D20
> =3D
=
>href=3D3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A=
>&g=3D
>t;=3D20
> wrote in message =3D
>=3D3D<BR>>news:46451438$1@linux...<BR>><BR>> I've=3D20
> got 2 mecs and a 442 working here, no problems at all.<BR>> =3D
>I'm also=3D20
> clocking with the old Lucid genX word clock. 5 modules in=3D20
> one<BR>=3D3D<BR>>mec,<BR>> 4 modules in the other. 1 adat =3D
>card each. 6=3D20
> eds cards, 3 UAD cards, =3D3D<BR>>all in<BR>> a magma. Oh =3D
>yeah, a Lynx=3D20
> one in the computer also.<BR>> Rod<BR>> "Tom Bruhl" =3D
><<A=3D20
> href=3D3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20
> wrote:<BR>> ><BR>> ><BR>> >I'll be =3D
>buying=3D20
> either two MECs or two 442s but don't want it<BR>> >to =3D
>mess my=3D20
> whole rig up if the 442s don't play nice.<BR>> >I am using =3D
>an=3D20
> older Lucid clock now with 2 Mecs already.<BR>> >They each =3D
>have=3D20
> five modules in them. The others may<BR>> >see a =3D
>single ADAT=3D20
> at most someday maybe.<BR>> ><BR>> >I can make =3D
>the=3D20
> MECs fit in the machine room with the others<BR>> >but the =3D
>442s=3D20
> would be a lot easier.<BR>> ><BR>> >Anyone =3D
>know=3D20
> Deej?<BR>> ><BR>> >Also I have to find the pin =3D
>config=3D20
> for a 56 pin EDAC/ELCO ADAT<BR>> >connector. I want =3D
>to chop=3D20
> this bad boy off and solder 16 TRS<BR>> >to it. =3D
>Anyone know=3D20
> whether the ADAT wiring is different than<BR>> =3D20
> >standard?<BR>> >Thanks,<BR>> =3D
>>Tom<BR>> =3D20
> ><BR>> ><BR>> ><BR>> =3D
>><BR>> =3D20
> >I choose Polesoft Lockspam to fight spam, and you?<BR>> =3D20
> >http://www.polesoft.com/refer.html =3D3D20<BR>> =3D20
> ><BR>> ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0=3D20
> Transitional//EN"><BR>> =3D
>><HTML><HEAD><BR>> =3D20
> ><META http-equiv=3D3D3D3DContent-Type =
content=3D3D3D3D"text/html;=3D20
> =3D3D3D<BR>> >charset=3D3D3D3Diso-8859-1"><BR>> =3D
>><META=3D20
> content=3D3D3D3D"MSHTML 6.00.2800.1400" =3D
>name=3D3D3D3DGENERATOR><BR>> =3D20
> ><STYLE></STYLE><BR>> =3D
>></HEAD><BR>> =3D20
> ><BODY bgColor=3D3D3D3D#ffffff><BR>> =3D
>><DIV><FONT=3D20
> face=3D3D3D3DArial size=3D3D3D3D2>I'll be buying either two MECs =
=3D
>=3D3D<BR>>or two=3D20
> =3D3D3D<BR>> >442s but=3D3D3D20<BR>> >don't want=3D20
> it</FONT></DIV><BR>> ><DIV><FONT=3D20
> face=3D3D3D3DArial size=3D3D3D3D2>to mess my whole rig up if the =
=3D
>=3D3D<BR>>442s=3D20
> =3D3D3D<BR>> >don't play=3D3D3D20<BR>> =3D20
> >nice.</FONT></DIV><BR>> =3D
>><DIV><FONT=3D20
> face=3D3D3D3DArial size=3D3D3D3D2>I am using an older Lucid =3D
>clock<BR>=3D3D<BR>>now=3D20
> =3D3D3D<BR>> >with 2 Mecs=3D3D3D20<BR>> =3D20
> >already.</FONT></DIV><BR>> =3D
>><DIV><FONT=3D20
> face=3D3D3D3DArial size=3D3D3D3D2>They each have five modules =
in=3D20
> =3D3D<BR>>=3D3D3D<BR>> >them. The=3D3D3D20<BR>> =3D
>>others=3D20
> may</FONT></DIV><BR>> ><DIV><FONT=3D20
> face=3D3D3D3DArial size=3D3D3D3D2>see a single ADAT at most=3D20
> =3D3D<BR>>someday=3D3D3D20<BR>> =3D20
> >maybe.</FONT></DIV><BR>> =3D
>><DIV><FONT=3D20
> face=3D3D3D3DArial size=3D3D3D3D2></FONT> =3D
></DIV><BR>> =3D20
> ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>I can make =3D
>the MECs fit=3D20
> in the =3D3D<BR>>machine<BR>> =3D3D3D<BR>> >room=3D20
> with=3D3D3D20<BR>> >the =3D
>others</FONT></DIV><BR>> =3D20
> ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>but the 442s =3D
>would be=3D20
> =3D3D<BR>></FONT><FONT =3D3D3D<BR>> =3D20
> >face=3D3D3D3DArial=3D3D3D20<BR>> >size=3D3D3D3D2>a lot=3D20
> easier.</FONT></DIV><BR>> ><DIV><FONT =3D
>
> face=3D3D3D3DArial size=3D3D3D3D2></FONT> =3D
></DIV><BR>> =3D20
> ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>Anyone know=3D20
> Deej?</FONT></DIV><BR>> ><DIV><FONT=3D20
> face=3D3D3D3DArial size=3D3D3D3D2></FONT> =3D
></DIV><BR>> =3D20
> ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>Also I have =3D
>to find the=3D20
> pin =3D3D<BR>>config for<BR>> =3D3D3D<BR>> >a 56=3D20
> pin=3D3D3D20<BR>> >EDAC/ELCO=3D20
> ADAT</FONT></DIV><BR>> ><DIV><FONT=3D20
> face=3D3D3D3DArial size=3D3D3D3D2>connector. I want to chop =
this=3D20
> =3D3D<BR>>=3D3D3D<BR>> >bad boy off=3D3D3D20<BR>> =3D
>>and solder=3D20
> 16 TRS</FONT></DIV><BR>> ><DIV><FONT=3D20
> face=3D3D3D3DArial size=3D3D3D3D2>to it. Anyone know whether =
the=3D20
> =3D3D<BR>>=3D3D3D<BR>> >ADAT wiring is=3D3D3D20<BR>> =3D
>>different=3D20
> than</FONT></DIV><BR>> ><DIV><FONT=3D20
> face=3D3D3D3DArial =3D
>size=3D3D3D3D2>standard?</FONT></DIV><BR>> =3D20
> ><DIV><FONT face=3D3D3D3DArial=3D20
> size=3D3D3D3D2>Thanks,</FONT></DIV><BR>> =3D20
> ><DIV><FONT face=3D3D3D3DArial=3D20
> size=3D3D3D3D2>Tom</FONT></DIV><BR>> =3D20
> ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2></FONT> =3D
>
> </DIV><BR>> ><DIV><FONT face=3D3D3D3DArial=3D20
> size=3D3D3D3D2></FONT> </DIV><BR>> =3D
>><DIV><FONT=3D20
> size=3D3D3D3D2><BR><BR>I choose Polesoft Lockspam to =3D
>fight=3D20
> =3D3D<BR>>spam, =3D3D3D<BR>> >and=3D3D3D20<BR>> =3D20
> >you?<BR><A=3D3D3D20<BR>> =3D
>=3D3D<BR>>>href=3D3D3D3D"<A=3D20
> =3D
=
>href=3D3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/re=
'>h=3D
=
>ttp://www.polesoft.com/refer.html">http://www.polesoft.com/re</A>=3D3D<B=
=3D
>R>>fer=3D3D3D<BR>> =3D20
> >.html</A>=3D20
> </FONT></DIV></BODY></HTML><BR>> =3D20
> ><BR>> ><BR>><BR>><BR>><!DOCTYPE HTML =3D
>PUBLIC=3D20
> "-//W3C//DTD HTML 4.0=3D20
> Transitional//EN"><BR>><HTML><HEAD><BR>><META=3D20
> http-equiv=3D3D3DContent-Type content=3D3D3D"text/html;=3D20
> =3D3D<BR>>charset=3D3D3Diso-8859-1"><BR>><META =3D
>content=3D3D3D"MSHTML=3D20
> 6.00.2800.1400"=3D20
> =3D
>name=3D3D3DGENERATOR><BR>><STYLE></STYLE><BR>></HEA=3D
>D><BR>><BODY=3D20
> bgColor=3D3D3D#ffffff><BR>><DIV><FONT face=3D3D3DArial =3D
>size=3D3D3D2>Hey=3D20
> Rod,</FONT></DIV><BR>><DIV><FONT =3D
>face=3D3D3DArial=3D20
> size=3D3D3D2>That sounds promising. What cards =3D3D<BR>>do =
you=3D20
> =3D
>have=3D3D20<BR>>the</FONT></DIV><BR>><DIV><FONT =3D
>
> face=3D3D3DArial size=3D3D3D2>Mecs and 442 connected=3D20
> to?</FONT></DIV><BR>><DIV><FONT face=3D3D3DArial =3D
>
> size=3D3D3D2>Tom</FONT></DIV><BR>><DIV><FONT=3D20
> face=3D3D3DArial size=3D3D3D2></FONT> =3D
></DIV><BR>><DIV>=3D20
> =3D
></DIV><BR>><BLOCKQUOTE=3D3D20<BR>>style=3D3D3D"PADDING-RIGHT: =3D
>0px;=3D20
> PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =3D3D<BR>>BORDER-LEFT: #000000 =
=3D
>2px solid;=3D20
> MARGIN-RIGHT: 0px"><BR>> <DIV>"Rod Lincoln"=3D20
> <<A=3D3D20<BR>> =3D3D<BR>>href=3D3D3D"<A=3D20
> =3D
=
>href=3D3D'mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A=
>&a=3D
=
>mp;g'>mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</=3D
>A>&g</A>=3D3D<BR>>t;=3D3D20<BR>> =3D20
> wrote in message <A=3D3D20<BR>> =3D3D<BR>>href=3D3D3D"<A=3D20
> =3D
=
>href=3D3D"news:46451438$1@linux">news:46451438$1@linux</A>...</DIV><BR=3D=
>>I've">news:46451438$1@linux">news:46451438$1@linux</A>...</D=3D
>IV><BR>I've</A>=3D3D<BR>>=3D20
> got 2=3D3D20<BR>> mecs and a 442 working here, no problems at=3D20
> all.<BR>I'm also clocking<BR>=3D3D<BR>>with =3D
>the=3D3D20<BR>> old=3D20
> Lucid genX word clock. 5 modules in one mec,<BR>4 modules in the =
=3D
>
> =3D3D<BR>>other. 1=3D3D20<BR>> adat card each. 6 eds cards, 3 =3D
>UAD cards,=3D20
> all in<BR>a magma. Oh yeah,<BR>=3D3D<BR>>a =3D
>Lynx=3D3D20<BR>> one in=3D20
> the computer also.<BR>Rod<BR>"Tom Bruhl"=3D20
> <<A=3D3D20<BR>> href=3D3D3D"<A=3D20
> =3D
=
>href=3D3D'mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D3D20'>m=
ailto=3D
>:arpegio@comcast.net">arpegio@comcast.net</A>>=3D3D20</A><BR>&g=3D
>t; =3D20
> wrote:<BR>><BR>><BR>>I'll be buying either =3D
>two MECs=3D20
> or two =3D3D<BR>>442s but=3D3D20<BR>> don't want =3D
>it<BR>>to mess=3D20
> my whole rig up if the 442s don't play=3D3D20<BR>> =3D
>nice.<BR>>I=3D20
> am using an older Lucid clock now with 2 Mecs=3D3D20<BR>> =3D20
> already.<BR>>They each have five modules in them. The=3D20
> others=3D3D20<BR>> may<BR>>see a single ADAT at most =3D
>someday=3D20
> maybe.<BR>><BR>>I =3D3D<BR>>can =3D
>make=3D3D20<BR>> the=3D20
> MECs fit in the machine room with the others<BR>>but the 442s =3D
>
> =3D3D<BR>>would be=3D3D20<BR>> a lot=3D20
> easier.<BR>><BR>>Anyone know=3D20
> Deej?<BR>><BR>>Also I =3D3D<BR>>have =3D
>to=3D3D20<BR>> find=3D20
> the pin config for a 56 pin EDAC/ELCO =3D
>=3D3D<BR>>ADAT<BR>>connector. I=3D20
> want=3D3D20<BR>> to chop this bad boy off and solder 16=3D20
> TRS<BR>>to it. Anyone =3D3D<BR>>know=3D3D20<BR>> =3D
>whether the ADAT=3D20
> wiring is different=3D3D20<BR>> =3D20
> =3D
>=3D3D<BR>>than<BR>>standard?<BR>>Thanks,<BR>>=3D
>Tom<BR>><BR>><BR>><B=3D3D<BR>>R>><=3D
>;BR>>I=3D3D20<BR>> =3D20
> choose Polesoft Lockspam to fight spam, and=3D3D20<BR>> =3D20
> you?<BR>>http://www.polesoft.com/refer.html =3D
>=3D3D20<BR>> =3D20
> <BR>><BR>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML =3D
>
> 4.0=3D3D20<BR>> =3D20
> =3D
>Transitional//EN"><BR>><HTML><HEAD><BR>>=3D
><META=3D3D20<BR>> =3D20
> http-equiv=3D3D3D3DContent-Type =3D
>content=3D3D3D3D"text/html;=3D3D20<BR>> =3D20
> =3D3D3D<BR>>charset=3D3D3D3Diso-8859-1"><BR>><META =3D
>
> =3D3D<BR>>content=3D3D3D3D"MSHTML=3D3D20<BR>> =3D
>6.00.2800.1400"=3D3D20<BR>> =3D20
> =3D
>=3D3D<BR>>name=3D3D3D3DGENERATOR><BR>><STYLE></STYLE&=3D
>gt;<BR>></HEA=3D3D<BR>>D><BR>><BODY=3D3D20<BR>&=3D
>gt; =3D20
> bgColor=3D3D3D3D#ffffff><BR>><DIV><FONT =3D
>face=3D3D3D3DArial=3D20
> =3D3D<BR>>size=3D3D3D3D2>I'll=3D3D20<BR>> be buying either =3D
>two MECs or two=3D20
> =3D3D3D<BR>>442s but=3D3D3D20<BR>>don't=3D20
> =3D3D<BR>>want=3D3D20<BR>> =3D20
> it</FONT></DIV><BR>><DIV><FONT=3D20
> face=3D3D3D3DArial=3D3D20<BR>> size=3D3D3D3D2>to mess my whole =3D
>rig up if the=3D20
> 442s =3D3D3D<BR>>don't=3D3D20<BR>> =3D20
> =3D
>=3D3D<BR>>play=3D3D3D20<BR>>nice.</FONT></DIV><BR&=3D
>gt;><DIV><FON=3D3D<BR>>T=3D3D20<BR>> =3D20
> face=3D3D3D3DArial size=3D3D3D3D2>I am using an older Lucid clock =
now=3D20
> =3D3D<BR>>=3D3D3D<BR>>with 2=3D3D20<BR>> =3D20
> =3D
>
=3D3D<BR>>Mecs=3D3D3D20<BR>>already.</FONT></DIV><=3D
>BR>><DIV><=3D3D<BR>>FONT=3D3D20<BR>> =3D20
> face=3D3D3D3DArial size=3D3D3D3D2>They each have five modules =
in=3D20
> =3D3D<BR>>=3D3D3D<BR>>them.=3D3D20<BR>> =3D
>The=3D3D3D20<BR>>others=3D20
> =3D
>=3D3D<BR>>may</FONT></DIV><BR>><DIV><FONT=3D3D=3D
>20<BR>> =3D20
> face=3D3D3D3DArial size=3D3D3D3D2>see a single ADAT at =3D
>most=3D3D20<BR>> =3D20
> =3D
>=3D3D<BR>>someday=3D3D3D20<BR>>maybe.</FONT></DIV><=3D
>;BR>><DIV><=3D3D<BR>>;FONT=3D3D20<BR>> =3D20
> face=3D3D3D3DArial size=3D3D3D3D2></FONT>=3D20
> =3D
>=3D3D<BR>></DIV><BR>><DIV><FONT=3D3D20<BR>>&nbs=3D
>p;=3D20
> face=3D3D3D3DArial size=3D3D3D3D2>I can make the MECs fit in =3D
>the=3D3D20<BR>> =3D20
> machine<BR>=3D3D3D<BR>>room=3D20
> with=3D3D3D20<BR>>the=3D3D20<BR>> =3D20
> others</FONT></DIV><BR>><DIV><FONT=3D20
> =3D3D<BR>>face=3D3D3D3DArial=3D3D20<BR>> size=3D3D3D3D2>but the =3D
>442s would be=3D20
> </FONT><FONT=3D3D20<BR>> =3D20
> =3D
>=3D3D3D<BR>>face=3D3D3D3DArial=3D3D3D20<BR>>size=3D3D3D3D2 >a=3D
>=3D20
> lot=3D3D20<BR>> =3D20
> easier.</FONT></DIV><BR>><DIV><FONT=3D20
> =3D3D<BR>>face=3D3D3D3DArial=3D3D20<BR>> =3D
>size=3D3D3D3D2></FONT>=3D20
> </DIV><BR>><DIV><FONT=3D20
> =3D3D<BR>>face=3D3D3D3DArial=3D3D20<BR>> size=3D3D3D3D2>Anyone=3D20
> know=3D3D20<BR>> =3D20
> Deej?</FONT></DIV><BR>><DIV><FONT=3D20
> =3D3D<BR>>face=3D3D3D3DArial=3D3D20<BR>> =3D
>size=3D3D3D3D2></FONT>=3D20
> </DIV><BR>><DIV><FONT=3D20
> =3D3D<BR>>face=3D3D3D3DArial=3D3D20<BR>> size=3D3D3D3D2>Also I =3D
>have to find the=3D20
> pin config for<BR>=3D3D3D<BR>>a =3D
>=3D3D<BR>>56=3D3D20<BR>> =3D20
> pin=3D3D3D20<BR>>EDAC/ELCO=3D3D20<BR>> =3D20
> ADAT</FONT></DIV><BR>><DIV><FONT=3D20
> =3D3D<BR>>face=3D3D3D3DArial=3D3D20<BR>> =3D
>size=3D3D3D3D2>connector. I want to=3D20
> chop this =3D3D3D<BR>>bad boy=3D20
> =3D3D<BR>>off=3D3D3D20<BR>>and=3D3D20<BR>> solder 16=3D20
> TRS</FONT></DIV><BR>><DIV><FONT=3D20
> =3D3D<BR>>face=3D3D3D3DArial=3D3D20<BR>> size=3D3D3D3D2>to it. =3D
>Anyone know=3D20
> whether the =3D3D3D<BR>>ADAT wiring=3D3D20<BR>> =3D20
> is=3D3D3D20<BR>>different=3D3D20<BR>> =3D20
> than</FONT></DIV><BR>><DIV><FONT=3D20
> =3D3D<BR>>face=3D3D3D3DArial=3D3D20<BR>> =3D20
> =3D
>=3D3D<BR>>size=3D3D3D3D2>standard?</FONT></DIV><BR>&g=3D
>t;<DIV><FO=3D3D<BR>>NT=3D3D20<BR>> =3D20
> face=3D3D3D3DArial=3D3D20<BR>> =3D20
> =3D
>=3D3D<BR>>size=3D3D3D3D2>Thanks,</FONT></DIV><BR>>=3D
><DIV><FONT=3D3D<BR>>=3D3D20<BR>> =3D20
> face=3D3D3D3DArial=3D3D20<BR>> =3D20
> =3D
>size=3D3D3D3D2>Tom</FONT></DIV><BR>><DIV><=3D
>FONT=3D3D20<BR>> =3D20
> face=3D3D3D3DArial size=3D3D3D3D2></FONT>=3D20
> =3D
>=3D3D<BR>></DIV><BR>><DIV><FONT=3D3D20<BR>>&nbs=3D
>p;=3D20
> face=3D3D3D3DArial size=3D3D3D3D2></FONT>=3D20
> =3D
>=3D3D<BR>></DIV><BR>><DIV><FONT=3D3D20<BR>>&nbs=3D
>p;=3D20
> size=3D3D3D3D2><BR><BR>I choose Polesoft Lockspam to =3D
>fight=3D20
> =3D3D<BR>>spam,=3D3D20<BR>> =3D20
> =3D
>=3D3D<BR>>=3D3D3D<BR>>and=3D3D3D20<BR>>you?<BR><A=3D
>=3D3D3D20<BR>>href=3D3D3D3D"<A=3D3D20<BR>> =3D20
> =3D
=
>=3D3D<BR>>href=3D3D3D'http://www.polesoft.com/refer.html">http://www.po=3D=
>lesoft.com/refer=3D3D<BR>>'>http://www.polesoft.com/refer.html">ht=3D
>tp://www.polesoft.com/refer</A=3D3D<BR>>>=3D3D3D<BR>>.html&=3D
>lt;/A>=3D3D20<BR>> =3D20
> =3D
>=3D3D<BR>></FONT></DIV></BODY></HTML><BR>&=3D
>gt;<BR>><BR></=3D3D<BR>>BLOCKQUOTE></BODY><=3D
>;/HTML><BR>><BR>><BR></BLOCKQUOTE></BODY></HTML>
>
>
------=_NextPart_000_00EA_01C79444.9A6648B0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>I don't know but I'd say it's an XP 3.0 =
problem. As deej said</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>it has alot to do with Paris booting up =
and=20
recognizing all the</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>hardware correctly.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I helped my friend refine his =
Chris=20
Ludwig XP computer (a real monster!)</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>and was surprised at the time it took =
to analyze=20
the hardware at start up.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>It was slower than mine but always =
worked=20
perfectly. He has external</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>clock, 2 Mecs with 2 ADATs, 8 in, 8 out =
in each=20
!!! I personally think it has </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>alot to </FONT><FONT face=3DArial =
size=3D2>do with the=20
first install of Paris and what hardware is onboard the MECS =
</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>at </FONT><FONT face=3DArial =
size=3D2>the time. =20
Chris is a genius though. That might have something to do with=20
it...</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>By the way did you read the email I =
sent you=20
back? can you respond to this:</FONT></DIV>
<DIV><FONT color=3D#800000 size=3D4>When Paris doesn't start =
properly it=20
sometimes gives an error </FONT><FONT color=3D#800000 size=3D4>with =
FxPansion. =20
</FONT></DIV>
<DIV><FONT color=3D#800000 size=3D4>I probably have a rogue plugin that =
doesn't want=20
to play nice.</FONT></DIV>
<DIV><FONT color=3D#800000 size=3D4>Any easy suggestions beside =
disabling DX? =20
I think FxPansion is scanning</FONT></DIV>
<DIV><FONT color=3D#800000 size=3D4>Waves Gold Bundle and Antares =
Autotune. =20
Maybe that's it? </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Dimitrios" <<A=20
href=3D"mailto:musurgio@otenet.gr">musurgio@otenet.gr</A>> wrote in =
message=20
<A =
href=3D"news:46456534$1@linux">news:46456534$1@linux</A>...</DIV><BR>Hi=20
Tom,<BR>When I tried this 442 and mec combination I only found a =
working=20
clocked<BR>system if 442 was a master so 20 bits versus 24 was =
inportant to me=20
for monitoring<BR>! (I still record only 16 bits !).<BR>What though =
was=20
evident is that I could NEVER have the ins and outs of 442<BR>working=20
correctly.<BR>You know sometimes we use 442 along mec and we mostly =
don't use=20
much of 442<BR>except for a spdif or something.<BR>It would be nice if =
someone=20
could CHECK that in a multi mec 442 system ALL<BR>442's ins and outs =
along=20
with mec's are working correctly.<BR>I know this is much to ask but =
Tom (and I=20
at least) would love that kind<BR>of testing info.<BR>A 442 would be a =
great=20
addition to me IF mec could be main card A and all<BR>ins and outs of=20
everything would work.<BR>Is this an XP problem or is it the same as =
in win98=20
or Me ?<BR>Regards,<BR>Dimitrios<BR><BR>"Tom Bruhl" <<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=20
wrote:<BR>><BR>><BR>>What do you guys think,<BR>>What are =
my=20
chances of getting two 442s in the mix<BR>>without my Mecs losing =
some of=20
their cards?<BR>>T.<BR>><BR>> "Rod Lincoln" <<A=20
=
href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&g=
t;=20
wrote in message =
=3D<BR>>news:46453f51$1@linux...<BR>><BR>> Mec 1=20
on card A, 442 on Card B, Mec 2 on Card F (my last card)<BR>> =
I'm=20
running spdif out of Mec 1 to a DAC 1<BR>> Rod<BR>> =
"Tom=20
Bruhl" <<A =
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=20
wrote:<BR>> ><BR>> ><BR>> >Hey=20
Rod,<BR>> >That sounds promising. What cards do you =
have=20
the<BR>> >Mecs and 442 connected to?<BR>> =20
>Tom<BR>> ><BR>> ><BR>> > =
"Rod=20
Lincoln" <<A=20
=
href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&g=
t;=20
wrote in message =3D3D<BR>> =
>news:46451438$1@linux...<BR>> =20
><BR>> > I've got 2 mecs and a 442 working here, =
no=20
problems at all.<BR>> > I'm also clocking with the =
old Lucid=20
genX word clock. 5 modules in<BR>=3D<BR>>one<BR>> =
=3D3D<BR>> =20
>mec,<BR>> > 4 modules in the other. 1 adat card =
each. 6=20
eds cards, 3 UAD cards,<BR>=3D<BR>>=3D3D<BR>> >all =
in<BR>> =20
> a magma. Oh yeah, a Lynx one in the computer =
also.<BR>> =20
> Rod<BR>> > "Tom Bruhl" <<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=20
wrote:<BR>> > ><BR>> > =20
><BR>> > >I'll be buying either two MECs or =
two 442s=20
but don't want it<BR>> > >to mess my whole rig up =
if the=20
442s don't play nice.<BR>> > >I am using an older =
Lucid=20
clock now with 2 Mecs already.<BR>> > >They each =
have=20
five modules in them. The others may<BR>> > =
>see a=20
single ADAT at most someday maybe.<BR>> > =
><BR>> =20
> >I can make the MECs fit in the machine room with the=20
others<BR>> > >but the 442s would be a lot=20
easier.<BR>> > ><BR>> > =
>Anyone know=20
Deej?<BR>> > ><BR>> > >Also =
I have=20
to find the pin config for a 56 pin EDAC/ELCO ADAT<BR>> =
> =20
>connector. I want to chop this bad boy off and solder 16=20
TRS<BR>> > >to it. Anyone know whether the =
ADAT=20
wiring is different than<BR>> > =
>standard?<BR>> =20
> >Thanks,<BR>> > >Tom<BR>> =20
> ><BR>> > ><BR>> > =
><BR>> > ><BR>> > >I =
choose=20
Polesoft Lockspam to fight spam, and you?<BR>> > =20
>http://www.polesoft.com/refer.html =3D3D20<BR>> =
> =20
><BR>> > ><!DOCTYPE HTML PUBLIC =
"-//W3C//DTD HTML=20
4.0 Transitional//EN"><BR>> > =20
><HTML><HEAD><BR>> > ><META=20
http-equiv=3D3D3D3DContent-Type content=3D3D3D3D"text/html;=20
=3D<BR>>=3D3D3D<BR>> > =20
>charset=3D3D3D3Diso-8859-1"><BR>> > =
><META=20
content=3D3D3D3D"MSHTML 6.00.2800.1400" =
name=3D3D3D3DGENERATOR><BR>> =20
> ><STYLE></STYLE><BR>> > =20
></HEAD><BR>> > ><BODY=20
bgColor=3D3D3D3D#ffffff><BR>> > =
><DIV><FONT=20
face=3D3D3D3DArial size=3D3D3D3D2>I'll be buying either =
two<BR>=3D<BR>>MECs=20
=3D3D<BR>> >or two =3D3D3D<BR>> > =
>442s=20
but=3D3D3D20<BR>> > >don't want=20
it</FONT></DIV><BR>> > =
><DIV><FONT=20
face=3D3D3D3DArial size=3D3D3D3D2>to mess my whole rig up =
=3D<BR>>if the=20
=3D3D<BR>> >442s =3D3D3D<BR>> > =
>don't=20
play=3D3D3D20<BR>> > =20
>nice.</FONT></DIV><BR>> > =20
><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>I am =
using an older=20
Lucid<BR>=3D<BR>>clock<BR>> =3D3D<BR>> >now=20
=3D3D3D<BR>> > >with 2 =
Mecs=3D3D3D20<BR>> > =20
>already.</FONT></DIV><BR >> > =20
><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>They each =
have five=20
=3D<BR>>modules in =3D3D<BR>> >=3D3D3D<BR>> =
> =20
>them. The=3D3D3D20<BR>> > >others=20
may</FONT></DIV><BR>> > =
><DIV><FONT=20
face=3D3D3D3DArial size=3D3D3D3D2>see a single ADAT at=20
most<BR>=3D<BR>>=3D3D<BR>> =
>someday=3D3D3D20<BR>> > =20
>maybe.</FONT></DIV><BR>> > =20
><DIV><FONT face=3D3D3D3DArial =
size=3D3D3D3D2></FONT>=20
</DIV><BR>> > ><DIV><FONT =
face=3D3D3D3DArial=20
size=3D3D3D3D2>I can make the MECs fit =3D<BR>>in the =
=3D3D<BR>> =20
>machine<BR>> > =3D3D3D<BR>> > =
>room=20
with=3D3D3D20<BR>> > >the=20
others</FONT></DIV><BR>> > =20
><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>but the =
442s would be=20
=3D3D<BR>> ></FONT><FONT =3D3D3D<BR>> =
> =20
>face=3D3D3D3DArial=3D3D3D20<BR>> > =
>size=3D3D3D3D2>a lot=20
easier.</FONT></DIV><BR>> > =20
><DIV><FONT face=3D3D3D3DArial =
size=3D3D3D3D2></FONT>=20
</DIV><BR>> > ><DIV><FONT =
face=3D3D3D3DArial=20
size=3D3D3D3D2>Anyone know=20
=3D<BR>>Deej?</FONT></DIV> <BR>> > =20
><DIV><FONT face=3D3D3D3DArial =
size=3D3D3D3D2></FONT>=20
</DIV><BR>> > ><DIV><FONT =
face=3D3D3D3DArial=20
size=3D3D3D3D2>Also I have to find the =3D<BR>>pin =
=3D3D<BR>> =20
>config for<BR>> > =3D3D3D<BR>> =
> >a=20
56 pin=3D3D3D20<BR>> > >EDAC/ELCO=20
ADAT</FONT></DIV><BR>> > =
><DIV><FONT=20
face=3D3D3D3DArial size=3D3D3D3D2>connector. I want to =
chop<BR>=3D<BR>>this=20
=3D3D<BR>> >=3D3D3D<BR>> > >bad boy=20
off=3D3D3D20<BR>> > >and solder 16=20
TRS</FONT></DIV><BR>> > =
><DIV><FONT=20
face=3D3D3D3DArial size=3D3D3D3D2>to it. Anyone know =
=3D<BR>>whether the=20
=3D3D<BR>> >=3D3D3D<BR>> > >ADAT =
wiring=20
is=3D3D3D20<BR>> > >different=20
than</FONT></DIV><BR>> > =
><DIV><FONT=20
face=3D3D3D3DArial=20
size=3D3D3D3D2>standard?</FONT>< /DIV> <BR>> =
> =20
><DIV><FONT face=3D3D3D3DArial=20
size=3D3D3D3D2>Thanks,</FONT></D IV> <BR>> =
> =20
><DIV><FONT face=3D3D3D3DArial=20
size=3D3D3D3D2>Tom</FONT></DIV&a mp;gt; <BR>> =
> =20
><DIV><FONT face=3D3D3D3DArial =
size=3D3D3D3D2></FONT>=20
</DIV><BR>> > ><DIV><FONT =
face=3D3D3D3DArial=20
size=3D3D3D3D2></FONT> </DIV><BR>> > =20
><DIV><FONT size=3D3D3D3D2><BR><BR>I choose =
Polesoft=20
Lockspam to =3D<BR>>fight =3D3D<BR>> >spam, =
=3D3D3D<BR>> =20
> >and=3D3D3D20<BR>> > =20
>you?<BR><A=3D3D3D20<BR>> > =
=3D3D<BR>> =20
=3D<BR>>>>href=3D3D3D3D"<A=20
=
href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com'>http=
://www.polesoft.com/refer.html">http://www.polesoft.com</A>=3D<BR>>=
/re=3D3D<BR>> =20
>fer=3D3D3D<BR>> > >.html</A>=20
</FONT></DIV></BODY&g t;</HTML> <BR>> =
> =20
><BR>> > ><BR>> ><BR>> =20
><BR>> ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0=20
Transitional//EN"><BR>> =
><HTML><HEAD><BR>> =20
><META http-equiv=3D3D3DContent-Type content=3D3D3D"text/html;=20
=3D3D<BR>> >charset=3D3D3Diso-8859-1"><BR>> =
><META=20
content=3D3D3D"MSHTML 6.00.2800.1400" =
name=3D3D3DGENERATOR><BR>> =20
><STYLE></STYLE><BR>> =
></HEAD><BR>> =20
><BODY bgColor=3D3D3D#ffffff><BR>> =
><DIV><FONT=20
face=3D3D3DArial size=3D3D3D2>Hey =
Rod,</FONT></DIV><BR>> =20
><DIV><FONT face=3D3D3DArial size=3D3D3D2>That sounds =
promising.=20
What =3D<BR>>cards =3D3D<BR>> >do you =
have=3D3D20<BR>> =20
>the</FONT></DIV><BR>> ><DIV><FONT =
face=3D3D3DArial size=3D3D3D2>Mecs and 442 connected=20
=3D<BR>>to?</FONT></DIV> <BR>> =
><DIV><FONT=20
face=3D3D3DArial =
size=3D3D3D2>Tom</FONT></DIV& ;gt; <BR>> =20
><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> =
</DIV><BR>> ><DIV> </DIV><BR>> =20
><BLOCKQUOTE=3D3D20<BR>> =
>style=3D3D3D"PADDING-RIGHT: 0px;=20
PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =3D<BR>>=3D3D<BR>> =20
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: =
0px"><BR>> =20
> <DIV>"Rod Lincoln" <<A=3D3D20<BR>> =
> =20
=3D3D<BR>> =3D<BR>>>href=3D3D3D"<A=20
=
href=3D'mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A'>m=
ailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A</A>=3D=
<BR>>>&g=3D3D<BR>> =20
>t;=3D3D20<BR>> > wrote in message =
<A=3D3D20<BR>> =20
> =3D3D<BR>> =3D<BR>>>href=3D3D3D"<A=20
=
href=3D'news:46451438$1@linux">news:46451438$1@linux</A>...</DIV><BR>I'>n=
ews:46451438$1@linux">news:46451438$1@linux</A>...</DIV>&l=
t;BR>I</A>=3D<BR>>'ve=3D3D<BR>> =20
> got 2=3D3D20<BR>> > mecs and a 442 working =
here, no=20
problems at all.<BR>I'm also =3D<BR>>clocking<BR>> =20
=3D3D<BR>> >with the=3D3D20<BR>> > old =
Lucid genX=20
word clock. 5 modules in one mec,<BR>4 modules in =3D<BR>>the =
=3D3D<BR>> >other. 1=3D3D20<BR>> > adat =
card each. 6=20
eds cards, 3 UAD cards, all in<BR>a magma. Oh=20
=3D<BR>>yeah,<BR>> =3D3D<BR>> >a =
Lynx=3D3D20<BR>> =20
> one in the computer also.<BR>Rod<BR>"Tom Bruhl" =
<<A=3D3D20<BR>> > href=3D3D3D"<A=20
=
href=3D'mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D3D20'>mail=
to:arpegio@comcast.net">arpegio@comcast.net</A>>=3D3D20</A><B=
R>> =20
> wrote:<BR>><BR>>&a mp;lt;BR>>I'll be =
buying=20
either two MECs or two =3D3D<BR>> >442s =
but=3D3D20<BR>> =20
> don't want it<BR>>to mess my whole rig up if the =
442s=20
don't =3D<BR>>play=3D3D20<BR>> > =
nice.<BR>>I am=20
using an older Lucid clock now with 2 Mecs=3D3D20<BR>> =
> =20
already.<BR>>They each have five modules in them. The=20
others=3D3D20<BR>> > may<BR>>see a single =
ADAT at=20
most someday maybe.<BR>><BR>>I =3D3D<BR>> =
>can=20
make=3D3D20<BR>> > the MECs fit in the machine room =
with the=20
others<BR>>but the 442s =3D<BR>>=3D3D<BR>> =
>would=20
be=3D3D20<BR>> > a lot=20
easier.<BR>><BR>>A nyone know=20
Deej?<BR>><BR>>Als o I =3D3D<BR>> >have=20
to=3D3D20<BR>> > find the pin config for a 56 pin =
EDAC/ELCO=20
=3D3D<BR>> >ADAT<BR>>connector. I =
want=3D3D20<BR>> =20
> to chop this bad boy off and solder 16 TRS<BR>>to =
it.=20
Anyone =3D3D<BR>> >know=3D3D20<BR>> > =
whether the=20
ADAT wiring is different=3D3D20<BR>> > =
=3D3D<BR>> =20
=
>than<BR>>standard?<BR&am p;gt;>Thanks,<BR>>Tom<=
BR>><BR>><BR&g t;><B=3D3D <BR>> =20
>R>><BR>>I=3D3D20<BR >> > choose =
Polesoft=20
Lockspam to fight spam, and=3D3D20<BR>> > =20
you?<BR>>http://www.polesoft.com/refer.html =
=3D3D20<BR>> =20
> <BR>><BR>>< !DOCTYPE HTML PUBLIC =
"-//W3C//DTD=20
HTML 4.0=3D3D20<BR>> > =20
=
Transitional//EN" ><BR>><HTML>&l t;HEAD><BR>>=
<META=3D3D20<BR>> =20
> http-equiv=3D3D3D3DContent-Type=20
content=3D3D3D3D"text/html;=3D3D20<BR>> > =20
=
=3D3D3D<BR>>charset=3D3D3D3Diso-8859-1"><BR>><MET=
A=20
=3D3D<BR>> >content=3D3D3D3D"MSHTML=3D3D20<BR>> =
> =20
6.00.2800.1400"=3D3D20<BR>> > =3D3D<BR>> =20
=
>name=3D3D3D3DGENERATOR><BR>& ;gt;<STYLE></STYLE>&l=
t;BR>></HEA=3D3D<BR>> =20
>D><BR>><BODY=3D3D 20 <BR>> > =20
bgColor=3D3D3D3D#ffffff><BR>>&am p;lt;DIV><FONT =
face=3D3D3D3DArial=20
=3D3D<BR>> >size=3D3D3D3D2>I'll=3D3D20<BR>> =
> be=20
buying either two MECs or two =3D3D3D<BR>>442s=20
=3D<BR>>but=3D3D3D20<BR>>don't =3D3D<BR>> =20
>want=3D3D20<BR>> > =20
it</FONT></DIV><BR> ;><DIV><FONT=20
face=3D3D3D3DArial=3D3D20<BR>> > =
size=3D3D3D3D2>to mess my=20
whole rig up if the 442s =
=3D<BR>>=3D3D3D<BR>>don't=3D3D20 <BR>> =20
> =3D3D<BR>> =20
=
>play=3D3D3D20<BR>>nice.< /FONT></DIV><BR>&g=
t;<DIV><FON=3D3D<BR>> =20
>T=3D3D20<BR>> > face=3D3D3D3DArial =
size=3D3D3D3D2>I am=20
using an older Lucid clock now =3D<BR>>=3D3D<BR>> =20
>=3D3D3D<BR>>with 2=3D3D20<BR>> > =
=3D3D<BR>> =20
=
>Mecs=3D3D3D20<BR>>already.& lt;/FONT></DIV><BR>=
;><DIV><=3D3D<BR>> =20
>FONT=3D3D20<BR>> > face=3D3D3D3DArial =
size=3D3D3D3D2>They=20
each have five modules in =3D3D<BR>> =20
>=3D3D3D<BR>>them.=3D3D20<BR>> > =20
The=3D3D3D20<BR>>others =3D3D<BR>> =20
=
>may</FONT></DIV>< BR>><DIV><FONT=3D3D20 <=
BR>> =20
> face=3D3D3D3DArial size=3D3D3D3D2>see a single ADAT at=20
most=3D3D20<BR>> > =3D3D<BR>> =20
=
>someday=3D3D3D20<BR>>maybe.& ;lt;/FONT></DIV><BR&g=
t;><DIV><=3D3D<BR>> =20
>;FONT=3D3D20<BR>> > face=3D3D3D3DArial=20
size=3D3D3D3D2></FONT> =3D3D<BR>> =20
></DIV><BR>>&l t;DIV><FONT=3D3D20 <BR>> =
> face=3D3D3D3DArial size=3D3D3D3D2>I can make the MECs =
fit in=20
the=3D3D20<BR>> > =
machine<BR>=3D3D3D<BR>>ro om=20
with=3D3D3D20<BR>>the=3D3D20<BR>> > =20
others</FONT></DIV><BR&am p;gt;><DIV><FONT=20
=3D3D<BR>> >face=3D3D3D3DArial=3D3D20<BR>> =
> =20
size=3D3D3D3D2>but the 442s would be =
</FONT><FONT=3D3D20<BR>> =20
> =20
=
=3D3D3D<BR>>face=3D3D3D3DArial=3D3D3D20 <BR>>size=3D3D3D=
3D2>a=20
lot=3D3D20<BR>> > =20
easier.</FONT></DIV><BR&a mp;gt;><DIV><FONT=20
=3D3D<BR>> >face=3D3D3D3DArial=3D3D20<BR>> =
> =20
size=3D3D3D3D2></FONT> =
</DIV><BR>><DIV&am p;gt;<FONT=20
=3D3D<BR>> >face=3D3D3D3DArial=3D3D20<BR>> =
> =20
size=3D3D3D3D2>Anyone know=3D3D20<BR>> > =20
Deej?</FONT></DIV><BR& ;gt;><DIV><FONT=20
=3D3D<BR>> >face=3D3D3D3DArial=3D3D20<BR>> =
> =20
size=3D3D3D3D2></FONT> =
</DIV><BR>><DIV&am p;gt;<FONT=20
=3D3D<BR>> >face=3D3D3D3DArial=3D3D20<BR>> =
> =20
size=3D3D3D3D2>Also I have to find the pin config=20
for<BR>=3D3D3D<BR>>a<BR>=3D <BR>>=3D3D<BR>> =20
>56=3D3D20<BR>> > =20
pin=3D3D3D20<BR>>EDAC/ELCO=3D3D20<BR>> > =20
ADAT</FONT></DIV><BR& gt;><DIV><FONT=20
=3D3D<BR>> >face=3D3D3D3DArial=3D3D20<BR>> =
> =20
size=3D3D3D3D2>connector. I want to chop this =
=3D3D3D<BR>>bad boy=20
=3D3D<BR>> =
>off=3D3D3D20<BR>>and=3D3D20<BR >> =20
> solder 16=20
TRS</FONT></DIV><BR&g t;><DIV><FONT=20
=3D3D<BR>> >face=3D3D3D3DArial=3D3D20<BR>> =
> =20
size=3D3D3D3D2>to it. Anyone know whether the =
=3D3D3D<BR>>ADAT=20
=3D<BR>>wiring=3D3D20<BR>> > =20
is=3D3D3D20<BR>>different=3D3D20<BR>> > =20
than</FONT></DIV><BR& gt;><DIV><FONT=20
=3D3D<BR>> >face=3D3D3D3DArial=3D3D20<BR>> =
> =20
=3D3D<BR>> =20
=
>size=3D3D3D3D2>standard?</FONT> </DIV><BR>><=
;DIV><FO=3D3D<BR>> =20
>NT=3D3D20<BR>> > =
face=3D3D3D3DArial=3D3D20<BR>> =20
> =3D3D<BR>> =20
=
>size=3D3D3D3D2>Thanks,</FONT>&a mp;lt;/DIV><BR>><D=
IV><FONT=3D3D<BR>> =20
>=3D3D20<BR>> > =
face=3D3D3D3DArial=3D3D20<BR>> =20
> =20
=
size=3D3D3D3D2>Tom</FONT></DIV&a mp;gt;<BR>><DIV>&l=
t;FONT=3D3D20<BR>> =20
> face=3D3D3D3DArial size=3D3D3D3D2></FONT> =
=3D3D<BR>> =20
></DIV><BR>>&l t;DIV><FONT=3D3D20 <BR>> =
> face=3D3D3D3DArial size=3D3D3D3D2></FONT> =
=3D3D<BR>> =20
></DIV><BR>>&l t;DIV><FONT=3D3D20 <BR>> =
> size=3D3D3D3D2><BR><BR>I choose Polesoft =
Lockspam to=20
fight =3D3D<BR>> >spam,=3D3D20<BR>> > =20
=3D3D<BR>> =20
=
>=3D3D3D<BR>>and=3D3D3D20< ;BR>>you?<BR><A=3D=
3D3D20<BR>>href=3D3D3D3D"<A=3D3D20 <BR>> =20
> =3D3D<BR>> =20
=
=3D<BR>>>href=3D3D3D'http://www.polesoft.com/refer.html">http://=
www.polesoft.com/re=3D<BR>>fer=3D3D<BR>> =20
=
=3D<BR>>>'>http://www.polesoft.com/refer.html">http://www.pol=
esoft.com/refer</A=3D3D=3D<BR>><BR>> =20
>>=3D3D3D<BR>>.html&l t;/A>=3D3D20 <BR>> =
> =20
=3D3D<BR>> =20
=
></FONT></DIV></BO DY></HTML><BR>>&am p;lt;=
BR>><BR></=3D3D<BR>> =20
>BLOCKQUOTE></BODY></HTML > <BR>> =
><BR>> =20
><BR>><BR>><BR>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML =
4.0=20
Transitional//EN"><BR>><HTML><HEAD> <BR>><META=20
http-equiv=3D3DContent-Type content=3D3D"text/html;=20
=3D<BR>>charset=3D3Diso-8859-1"><BR>><META =
content=3D3D"MSHTML=20
6.00.2800.1400"=20
=
name=3D3DGENERATOR><BR>><STYLE></STYLE> <BR>></HEA=
D><BR>><BODY=20
bgColor=3D3D#ffffff><BR>><DIV><FONT face=3D3DArial =
size=3D3D2>What=20
do you guys think,</FONT></DIV><BR>><DIV><FONT =
face=3D3DArial size=3D3D2>What are my chances of getting two=20
442s<BR>=3D<BR>>in=20
=
the=3D20<BR>>mix</FONT></DIV> <BR>><DIV><FONT=20
face=3D3DArial size=3D3D2>without my Mecs losing some =
of=3D20<BR>>their=20
cards?</FONT></DIV><BR>><DIV><FONT =
face=3D3DArial=20
size=3D3D2>T.</FONT></DIV> ; <BR>><DIV><FONT=20
face=3D3DArial size=3D3D2></FONT>=20
=
</DIV><BR>><BLOCKQUOTE=3D20<BR >>style=3D3D"PADDING-RIGHT: =
0px;=20
PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =3D<BR>>BORDER-LEFT: #000000 =
2px solid;=20
MARGIN-RIGHT: 0px"><BR>> <DIV>"Rod Lincoln"=20
<<A=3D20<BR>> =3D<BR>>href=3D3D"<A=20
=
href=3D'mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&a=
mp;g'>mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</=
A>&g</A>=3D<BR>>t;=3D20<BR>> =20
wrote in message <A=3D20<BR>> =3D<BR>>href=3D3D"<A=20
=
href=3D'news:46453f51$1@linux">news:46453f51$1@linux</A>...</DIV><BR>Mec'=
>news:46453f51$1@linux">news:46453f51$1@linux</A>...</DIV>=
<BR>Mec</A><BR>=3D<BR>>1=20
on=3D20<BR>> card A, 442 on Card B, Mec 2 on Card F (my last=20
card)<BR>I'm running =3D<BR>>spdif out=3D20<BR>> of =
Mec 1 to a=20
DAC 1<BR>Rod<BR>"Tom Bruhl" <<A=3D20<BR>> =
href=3D3D"<A=20
=
href=3D'mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20'>mailto=
:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20</A><BR>&g=
t; =20
wrote:<BR>><BR>>&a mp;lt;BR>>Hey =
Rod,<BR>>That=20
sounds =3D<BR>>promising. =3D20<BR>> What cards do you =
have=20
the<BR>>Mecs and 442 connected=3D20<BR>> =20
to?<BR>>Tom<BR>>&a mp;lt;BR>><BR>> "Rod =
Lincoln"=20
<<A=3D20<BR>> =3D<BR>>href=3D3D"<A=20
=
href=3D'mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&a=
mp;g'>mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</=
A>&g</A>=3D<BR>>t;=3D20<BR>> =20
wrote in message=20
=
=3D<BR>>=3D3D<BR>>news:46451438$1@linux...<BR>><B=
R>>=20
I've=3D20<BR>> got 2 mecs and a 442 working here, no problems =
at=20
all.<BR>> =3D<BR>>I'm also=3D20<BR>> clocking =
with the old=20
Lucid genX word clock. 5 modules in=3D20<BR>> =20
one<BR>=3D3D<BR>>mec,& ;lt;BR>> 4 modules in the =
other. 1=20
adat =3D<BR>>card each. 6=3D20<BR>> eds cards, 3 UAD =
cards,=20
=3D3D<BR>>all in<BR>> a magma. Oh =3D<BR>>yeah, a =
Lynx=3D20<BR>> one in the computer also.<BR>>=20
Rod<BR>> "Tom Bruhl" =3D<BR>><<A=3D20<BR>> =
href=3D3D"<A=20
=
href=3D'mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20'>mailto=
:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20</A><BR>&g=
t; =20
wrote:<BR>> ><BR>> ><BR>> >I'll be =
=3D<BR>>buying=3D20<BR>> either two MECs or two 442s but =
don't want=20
it<BR>> >to =3D<BR>>mess my=3D20<BR>> whole =
rig up if the=20
442s don't play nice.<BR>> >I am using=20
=3D<BR>>an=3D20<BR>> older Lucid clock now with 2 Mecs=20
already.<BR>> >They each =
=3D<BR>>have=3D20<BR>> five=20
modules in them. The others may<BR>> >see a =
=3D<BR>>single=20
ADAT=3D20<BR>> at most someday maybe.<BR>> =
><BR>>=20
>I can make =3D<BR>>the=3D20<BR>> MECs fit in the =
machine room with=20
the others<BR>> >but the =
=3D<BR>>442s=3D20<BR>> would be a=20
lot easier.<BR>> ><BR>> >Anyone=20
=3D<BR>>know=3D20<BR>> Deej?<BR>> =
><BR>> >Also=20
I have to find the pin =3D<BR>>config=3D20<BR>> for a 56 =
pin EDAC/ELCO=20
ADAT<BR>> >connector. I want =3D<BR>>to =
chop=3D20<BR>> =20
this bad boy off and solder 16 TRS<BR>> >to it. =
=3D<BR>>Anyone=20
know=3D20<BR>> whether the ADAT wiring is different =
than<BR>>=20
=3D20<BR>> >standard?<BR>> =
>Thanks,<BR>>=20
=3D<BR>>>Tom<BR>> =3D20<BR>> =
><BR>>=20
><BR>> ><BR>> =3D<BR>>><BR>>=20
=3D20<BR>> >I choose Polesoft Lockspam to fight spam, and=20
you?<BR>> =3D20<BR>> =
>http://www.polesoft.com/refer.html=20
=3D3D20<BR>> =3D20<BR>> ><BR>> =
><!DOCTYPE HTML=20
PUBLIC "-//W3C//DTD HTML 4.0=3D20<BR>> =20
Transitional//EN"><BR>>=20
=3D<BR> >><HTML><HEAD>& ;lt;BR>> =
=3D20<BR>> =20
><META http-equiv=3D3D3D3DContent-Type=20
content=3D3D3D3D"text/html;=3D20<BR>> =3D3D3D<BR>>=20
>charset=3D3D3D3Diso-8859-1"><BR>>=20
=3D<BR>>><META=3D20<BR>> content=3D3D3D3D"MSHTML =
6.00.2800.1400"=20
=3D<BR> >name=3D3D3D3DGENERATOR><BR>& ;gt; =
=3D20<BR>> =20
><STYLE></STYLE><B R>>=20
=3D<BR> >></HEAD><BR>& gt; =3D20<BR>> =
><BODY=20
bgColor=3D3D3D3D#ffffff><BR>>=20
=3D<BR>>><DIV><FONT=3D20 <BR>> =
face=3D3D3D3DArial=20
size=3D3D3D3D2>I'll be buying either two MECs =
=3D<BR>>=3D3D<BR>>or=20
two=3D20<BR>> =3D3D3D<BR>> >442s =
but=3D3D3D20<BR>>=20
>don't want=3D20<BR>> =
it</FONT></DIV><BR> ;>=20
><DIV><FONT=3D20<BR>> face=3D3D3D3DArial =
size=3D3D3D3D2>to=20
mess my whole rig up if the =
=3D<BR>>=3D3D<BR>>442s=3D20<BR >> =20
=3D3D3D<BR>> >don't play=3D3D3D20<BR>> =
=3D20<BR>> =20
>nice.</FONT></DIV>&l t;BR>>=20
=3D<BR>>><DIV><FONT=3D20 <BR>> =
face=3D3D3D3DArial=20
size=3D3D3D3D2>I am using an older Lucid=20
=3D<BR> >clock<BR>=3D3D<BR>&g t;now=3D20 <BR>> =20
=3D3D3D<BR>> >with 2 Mecs=3D3D3D20<BR>> =
=3D20<BR>> =20
>already.</FONT></DIV>&am p;lt;BR>>=20
=3D<BR>>><DIV><FONT=3D20 <BR>> =
face=3D3D3D3DArial=20
size=3D3D3D3D2>They each have five modules in=3D20<BR>> =20
=3D3D<BR>>=3D3D3D<BR>& ;gt; >them. =
The=3D3D3D20<BR>>=20
=3D<BR>>>others=3D20<BR>> =20
may</FONT></DIV><BR&g t;>=20
><DIV><FONT=3D20<BR>> face=3D3D3D3DArial =
size=3D3D3D3D2>see=20
a single ADAT at most=3D20<BR>> =20
=3D3D<BR>>someday=3D3D3D20<BR&am p;gt;> =3D20<BR>> =20
>maybe.</FONT></DIV>& lt;BR>>=20
=3D<BR>>><DIV><FONT=3D20 <BR>> =
face=3D3D3D3DArial=20
size=3D3D3D3D2></FONT> =3D<BR>></DIV><BR>>=20
=3D20<BR>> ><DIV><FONT face=3D3D3D3DArial =
size=3D3D3D3D2>I=20
can make =3D<BR>>the MECs fit=3D20<BR>> in the=20
=3D3D<BR>>machine<BR>& ;gt; =3D3D3D<BR>>=20
>room=3D20<BR>> with=3D3D3D20<BR>> >the=20
=3D<BR> >others</FONT></DIV>& lt;BR>> =
=3D20<BR>> =20
><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>but the =
442s=20
=3D<BR>>would be=3D20<BR>> =
=3D3D<BR>></FONT>< FONT=20
=3D3D3D<BR>> =3D20<BR>> =20
>face=3D3D3D3DArial=3D3D3D20<BR>> ; >size=3D3D3D3D2>a=20
lot=3D20<BR>> easier.</FONT></DIV><BR&a mp;gt;>=20
><DIV><FONT =3D<BR>><BR>> face=3D3D3D3DArial=20
size=3D3D3D3D2></FONT> =3D<BR>></DIV><BR>>=20
=3D20<BR>> ><DIV><FONT face=3D3D3D3DArial=20
size=3D3D3D3D2>Anyone know=3D20<BR>> =20
Deej?</FONT></DIV><BR& ;gt;>=20
><DIV><FONT=3D20<BR>> face=3D3D3D3DArial=20
size=3D3D3D3D2></FONT> =3D<BR>></DIV><BR>>=20
=3D20<BR>> ><DIV><FONT face=3D3D3D3DArial=20
size=3D3D3D3D2>Also I have =3D<BR>>to find =
the=3D20<BR>> pin=20
=3D3D<BR>>config for<BR>> =3D3D3D<BR>> =
>a=20
56=3D20<BR>> pin=3D3D3D20<BR>> =
>EDAC/ELCO=3D20<BR>> =20
ADAT</FONT></DIV><BR& gt;>=20
><DIV><FONT=3D20<BR>> face=3D3D3D3DArial=20
size=3D3D3D3D2>connector. I want to chop this=3D20<BR>> =20
=3D3D<BR>>=3D3D3D<BR>& ;gt; >bad boy =
off=3D3D3D20<BR>>=20
=3D<BR>>>and solder=3D20<BR>> 16=20
TRS</FONT></DIV><BR&g t;>=20
><DIV><FONT=3D20<BR>> face=3D3D3D3DArial =
size=3D3D3D3D2>to=20
it. Anyone know whether the=3D20<BR>> =20
=3D3D<BR>>=3D3D3D<BR>& ;gt; >ADAT wiring =
is=3D3D3D20<BR>>=20
=3D<BR>>>different=3D20<BR>> =20
than</FONT></DIV><BR& gt;>=20
><DIV><FONT=3D20<BR>> face=3D3D3D3DArial=20
=
=3D<BR> >size=3D3D3D3D2>standard?</FONT> </DIV><BR>=
>=20
=3D20<BR>> ><DIV><FONT =
face=3D3D3D3DArial=3D20<BR>> =20
size=3D3D3D3D2>Thanks,</FONT></D IV><BR>>=20
=3D20<BR>> ><DIV><FONT =
face=3D3D3D3DArial=3D20<BR>> =20
size=3D3D3D3D2>Tom</FONT></DIV&a mp;gt;<BR>> =
=3D20<BR>> =20
><DIV><FONT face=3D3D3D3DArial =
size=3D3D3D3D2></FONT>=20
=3D<BR>><BR>> </DIV><BR>> =
><DIV><FONT=20
face=3D3D3D3DArial=3D20<BR>> size=3D3D3D3D2></FONT>=20
</DIV><BR>> =
=3D<BR>>><DIV><FONT=3D20 <BR>> =20
size=3D3D3D3D2><BR><BR>I choose Polesoft Lockspam to=20
=3D<BR>>fight=3D20<BR>> =3D3D<BR>>spam, =
=3D3D3D<BR>>=20
>and=3D3D3D20<BR>> =3D20<BR>> =20
>you?<BR><A=3D3D3D20<BR&a mp;gt;>=20
=
=3D<BR> >=3D3D<BR>>>href=3D3D3D3D "<A=3D20<BR>> =
=
=3D<BR>>href=3D3D'http://www.polesoft.com/refer.html">http://www.po=
lesoft.com/re'>h=3D<BR>>ttp://www.polesoft.com/refer.html">http:=
//www.polesoft.com/re</A>=3D3D<B=3D<BR >>R>>fer=3D3D3D&l=
t;BR>>=20
=3D20<BR>> >.html</A>=3D20<BR>> =20
</FONT></DIV></BODY&g t;</HTML><BR>>=20
=3D20<BR>> ><BR>>=20
><BR>><BR>> <BR>><!DOCTYPE HTML=20
=3D<BR>>PUBLIC=3D20<BR>> "-//W3C//DTD HTML =
4.0=3D20<BR>> =20
=
Transitional//EN" ><BR>><HTML>&l t;HEAD><BR>>=
<META=3D20<BR>> =20
http-equiv=3D3D3DContent-Type =
content=3D3D3D"text/html;=3D20<BR>> =20
=3D3D<BR>>charset=3D3D3Diso-8859-1"><BR>><META =
=3D<BR>>content=3D3D3D"MSHTML=3D20<BR>> =
6.00.2800.1400"=3D20<BR>> =20
=
=3D<BR> >name=3D3D3DGENERATOR><BR>&g t;<STYLE></STYLE&=
gt;<BR>></HEA=3D<BR> >D><BR>><BODY=3D20 <BR>&=
gt; =20
bgColor=3D3D3D#ffffff><BR>>& lt;DIV><FONT =
face=3D3D3DArial=20
=3D<BR>>size=3D3D3D2>Hey=3D20<BR>> =20
Rod,</FONT></DIV><BR& gt;><DIV><FONT=20
=3D<BR>>face=3D3D3DArial=3D20<BR>> size=3D3D3D2>That =
sounds promising.=20
What cards =3D3D<BR>>do you=3D20<BR>> =20
=
=3D<BR> >have=3D3D20<BR>>the</FON T></DIV><BR>=
;><DIV><FONT=20
=3D<BR>><BR>> face=3D3D3DArial size=3D3D3D2>Mecs and =
442=20
connected=3D20<BR>> =20
to?</FONT></DIV><BR&g t;><DIV><FONT =
face=3D3D3DArial=20
=3D<BR>><BR>> =20
=
size=3D3D3D2>Tom</FONT></DIV& ;gt;<BR>><DIV><=
FONT=3D20<BR>> =20
face=3D3D3DArial size=3D3D3D2></FONT>=20
=3D<BR> ></DIV><BR>>&l t;DIV>=3D20 <BR>> =20
=
=3D<BR> ></DIV><BR>>&l t;BLOCKQUOTE=3D3D20<BR>>s=
tyle=3D3D3D"PADDING-RIGHT:=20
=3D<BR>>0px;=3D20<BR>> PADDING-LEFT: 5px; MARGIN-LEFT: =
5px;=20
=3D3D<BR>>BORDER-LEFT: #000000 =3D<BR>>2px =
solid;=3D20<BR>> =20
MARGIN-RIGHT: 0px"><BR>> <DIV>"Rod =
Lincoln"=3D20<BR>> =20
<<A=3D3D20<BR>> =
=3D3D<BR>>href=3D3D3D"<A=3D20<BR >> =20
=
=3D<BR>>href=3D3D'mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam=
..kc.rr.com</A>&a=3D<BR>>mp;g'>mailto:rlincoln@nospam.kc.r=
r.com">rlincoln@nospam.kc.rr.com</=3D<BR>>A>&g</A>=3D=
3D<BR>>t;=3D3D20<BR>& gt;=20
=3D20<BR>> wrote in message <A=3D3D20<BR>>=20
=3D3D<BR>>href=3D3D3D"<A=3D20<BR >> =
=3D<BR>>href=3D3D"<A=20
=
href=3D'news:46451438$1@linux">news:46451438$1@linux</A>...</DIV><BR'>new=
s:46451438$1@linux">news:46451438$1@linux</A>...</DIV><=
BR</A>=3D<BR>>>I've">news:46451438$1@linux">news:46451438$1@l=
inux</A>...</D=3D<BR> >IV><BR>I've</A>=3 D3D<=
BR>>=3D20<BR>> =20
got 2=3D3D20<BR>> mecs and a 442 working here, no problems=20
at=3D20<BR>> all.<BR>I'm also=20
clocking<BR>=3D3D<BR>>wit h =
=3D<BR>>the=3D3D20<BR>>=20
old=3D20<BR>> Lucid genX word clock. 5 modules in one =
mec,<BR>4=20
modules in the =3D<BR>><BR>> =3D3D<BR>>other.=20
1=3D3D20<BR>> adat card each. 6 eds cards, 3 =3D<BR>>UAD=20
cards,=3D20<BR>> all in<BR>a magma. Oh=20
yeah,<BR>=3D3D<BR>>a =
=3D<BR>>Lynx=3D3D20<BR>> one=20
in=3D20<BR>> the computer also.<BR>Rod<BR>"Tom=20
Bruhl"=3D20<BR>> <<A=3D3D20<BR>>=20
href=3D3D3D"<A=3D20<BR>> =20
=
=3D<BR>>href=3D3D'mailto:arpegio@comcast.net">arpegio@comcast.net&l=
t;/A>>=3D3D20'>mailto=3D<BR>>:arpegio@comcast.net">arpegio=
@comcast.net</A>>=3D3D20</A& gt;<BR>&g=3D <BR>>t; =
=3D20<BR>> =
wrote:<BR>><BR>>&a mp;lt;BR>>I'll be=20
buying either =3D<BR>>two MECs=3D20<BR>> or two =
=3D3D<BR>>442s=20
but=3D3D20<BR>> don't want =3D<BR>>it<BR>>to=20
mess=3D20<BR>> my whole rig up if the 442s don't=20
play=3D3D20<BR>> =
=3D<BR>>nice.<BR>>I=3D20<BR>> am=20
using an older Lucid clock now with 2 Mecs=3D3D20<BR>>=20
=3D20<BR>> already.<BR>>They each have five modules =
in them.=20
The=3D20<BR>> others=3D3D20<BR>> =
may<BR>>see a single=20
ADAT at most =3D<BR>>someday=3D20<BR>> =20
maybe.<BR>><BR>>I =3D3D<BR>>can=20
=3D<BR>>make=3D3D20<BR>> the=3D20<BR>> MECs fit =
in the machine=20
room with the others<BR>>but the 442s =
=3D<BR>><BR>> =20
=3D3D<BR>>would be=3D3D20<BR>> a =
lot=3D20<BR>> =20
easier.<BR>><BR>>A nyone know=3D20<BR>> =20
Deej?<BR>><BR>>Als o I =3D3D<BR>>have=20
=3D<BR>>to=3D3D20<BR>> find=3D20<BR>> the pin =
config for a 56=20
pin EDAC/ELCO =
=3D<BR> >=3D3D<BR>>ADAT<BR> ;>connector.=20
I=3D20<BR>> want=3D3D20<BR>> to chop this bad boy =
off and solder=20
16=3D20<BR>> TRS<BR>>to it. Anyone=20
=3D3D<BR>>know=3D3D20<BR> > =3D<BR>>whether the=20
ADAT=3D20<BR>> wiring is different=3D3D20<BR>> =
=3D20<BR>> =20
=
=3D<BR> >=3D3D<BR>>than<BR> ;>standard?<BR>>Th=
anks,<BR>>=3D<BR> >Tom<BR>><BR>& gt;<BR>&g=
t;<B=3D3D<BR>>R>>& amp;lt;=3D <BR>>;BR>>I=3D3D20<=
BR>>=20
=3D20<BR>> choose Polesoft Lockspam to fight spam,=20
and=3D3D20<BR>> =3D20<BR>> =20
you?<BR>>http://www.polesoft.com/refer.html=20
=3D<BR>>=3D3D20<BR>> =3D20<BR>> =20
<BR>><BR>>< !DOCTYPE HTML PUBLIC "-//W3C//DTD HTML =
=3D<BR>><BR>> 4.0=3D3D20<BR>> =3D20<BR>> =
=
=3D<BR>>Transitional//EN" ><BR>><HTML>&l t;HEAD><=
;BR>>=3D<BR>><META=3D3D20<BR>>=20
=3D20<BR>> http-equiv=3D3D3D3DContent-Type=20
=3D<BR>>content=3D3D3D3D"text/html;=3D3D20<BR>> =
=3D20<BR>> =20
=
=3D3D3D<BR>>charset=3D3D3D3Diso-8859-1"><BR>><MET=
A=20
=3D<BR>><BR>> =20
=3D3D<BR>>content=3D3D3D3D"MSHTML=3D3D20<BR>>=20
=3D<BR>>6.00.2800.1400"=3D3D20<BR>> =3D20<BR>> =20
=
=3D<BR> >=3D3D<BR>>name=3D3D3D3DGENERATO R><BR>><=
;STYLE></STYLE&=3D<BR> >gt;<BR>></HEA=3D3D&l t;BR&=
gt;>D><BR>><BODY=3 D3D20<BR>&=3D <BR>>gt;=20
=3D20<BR>> =
bgColor=3D3D3D3D#ffffff><BR>>&am p;lt;DIV><FONT=20
=3D<BR>>face=3D3D3D3DArial=3D20<BR>> =20
=3D3D<BR>>size=3D3D3D3D2>I'll=3D 3D20<BR>> be =
buying either=20
=3D<BR>>two MECs or two=3D20<BR>> =
=3D3D3D<BR>>442s=20
but=3D3D3D20<BR>>don't=3D20<BR>> =20
=3D3D<BR>>want=3D3D20<BR> > =3D20<BR>> =20
=
it</FONT></DIV><BR> ;><DIV><FONT=3D20 <BR>>=
=20
face=3D3D3D3DArial=3D3D20<BR>> size=3D3D3D3D2>to mess my =
whole=20
=3D<BR>>rig up if the=3D20<BR>> 442s=20
=3D3D3D<BR>>don't=3D3D20<BR& gt;> =3D20<BR>> =20
=
=3D<BR> >=3D3D<BR>>play=3D3D3D20< BR>>nice.</FONT&g=
t;</DIV><BR&=3D<BR> >gt;><DIV><FON=3D3D&l t;BR&=
gt;>T=3D3D20<BR>>=20
=3D20<BR>> face=3D3D3D3DArial size=3D3D3D3D2>I am using an =
older Lucid=20
clock now=3D20<BR>> =
=3D3D<BR>>=3D3D3D<BR>& ;gt;with=20
2=3D3D20<BR>> =3D20<BR>> =20
=
=3D<BR>><BR> =3D3D<BR>>Mecs=3D3D3D20<BR&g t;>already.<=
/FONT></DIV><=3D<BR> >BR>><DIV><=3D3D&a mp;lt;BR&=
gt;>FONT=3D3D20<BR>>=20
=3D20<BR>> face=3D3D3D3DArial size=3D3D3D3D2>They each =
have five modules=20
in=3D20<BR>> =20
=3D3D<BR>>=3D3D3D<BR>& ;gt;them.=3D3D20<BR>>=20
=3D<BR>>The=3D3D3D20<BR>>others=3D20 <BR>> =20
=
=3D<BR> >=3D3D<BR>>may</FONT& gt;</DIV><BR>>&=
lt;DIV><FONT=3D3D=3D<BR>>20<BR>>=20
=3D20<BR>> face=3D3D3D3DArial size=3D3D3D3D2>see a single =
ADAT at=20
=3D<BR>>most=3D3D20<BR>> =3D20<BR>> =20
=
=3D<BR> >=3D3D<BR>>someday=3D3D3D20& lt;BR>>maybe.</FO=
NT></DIV><=3D<BR> >;BR>><DIV><=3D3D& amp;lt;BR>=
;>;FONT=3D3D20<BR>>=20
=3D20<BR>> face=3D3D3D3DArial=20
size=3D3D3D3D2></FONT>=3D20<BR>> =20
=
=3D<BR> >=3D3D<BR>></DIV>& amp;lt;BR>><DIV><FO=
NT=3D3D20<BR>>&nbs=3D<BR>>p;=3D20 <BR>> =20
face=3D3D3D3DArial size=3D3D3D3D2>I can make the MECs fit in=20
=3D<BR>>the=3D3D20<BR>> =3D20<BR>> =20
machine<BR>=3D3D3D<BR>>ro om=3D20 <BR>> =20
with=3D3D3D20<BR>>the=3D3D20<BR& amp;gt;> =
=3D20<BR>> =20
=
others</FONT></DIV><BR&am p;gt;><DIV><FONT=3D20 <BR>=
> =20
=3D3D<BR>>face=3D3D3D3DArial=3D3D20& ;lt;BR>> =
size=3D3D3D3D2>but the=20
=3D<BR>>442s would be=3D20<BR>> =20
</FONT><FONT=3D3D20<BR>&a mp;gt; =3D20<BR>> =20
=
=3D<BR> >=3D3D3D<BR>>face=3D3D3D3DArial= 3D3D3D20<BR>>=
size=3D3D3D3D2>a=3D<BR>>=3D20<BR>> =20
lot=3D3D20<BR>> =3D20<BR>> =20
=
easier.</FONT></DIV><BR&a mp;gt;><DIV><FONT=3D20 <BR=
>> =20
=3D3D<BR>>face=3D3D3D3DArial=3D3D20& ;lt;BR>>=20
=3D<BR>>size=3D3D3D3D2></FONT>=3D20 <BR>> =20
</DIV><BR>><DIV&am p;gt;<FONT=3D20 <BR>> =20
=3D3D<BR>>face=3D3D3D3DArial=3D3D20& ;lt;BR>>=20
size=3D3D3D3D2>Anyone=3D20<BR>> know=3D3D20<BR>>=20
=3D20<BR>> =20
=
Deej?</FONT></DIV><BR& ;gt;><DIV><FONT=3D20 <BR>&=
gt; =20
=3D3D<BR>>face=3D3D3D3DArial=3D3D20& ;lt;BR>>=20
=3D<BR>>size=3D3D3D3D2></FONT>=3D20 <BR>> =20
</DIV><BR>><DIV&am p;gt;<FONT=3D20 <BR>> =20
=3D3D<BR>>face=3D3D3D3DArial=3D3D20& ;lt;BR>> =
size=3D3D3D3D2>Also I=20
=3D<BR>>have to find the=3D20<BR>> pin config=20
for<BR>=3D3D3D<BR>>a=20
=3D<BR> >=3D3D<BR>>56=3D3D20<BR&a mp;gt;> =
=3D20<BR>> =20
pin=3D3D3D20<BR>>EDAC/ELCO=3D3D20&l t;BR>> =
=3D20<BR>> =20
=
ADAT</FONT></DIV><BR& gt;><DIV><FONT=3D20 <BR>&g=
t; =20
=3D3D<BR>>face=3D3D3D3DArial=3D3D20& ;lt;BR>>=20
=3D<BR>>size=3D3D3D3D2>connector. I want to=3D20<BR>> =
chop this=20
=3D3D3D<BR>>bad boy=3D20<BR>> =20
=3D3D<BR>>off=3D3D3D20<BR> ;>and=3D3D20<BR>> =
solder=20
16=3D20<BR>> =20
=
TRS</FONT></DIV><BR&g t;><DIV><FONT=3D20 <BR>>=
; =20
=3D3D<BR>>face=3D3D3D3DArial=3D3D20& ;lt;BR>> =
size=3D3D3D3D2>to it.=20
=3D<BR>>Anyone know=3D20<BR>> whether the =
=3D3D3D<BR>>ADAT=20
wiring=3D3D20<BR>> =3D20<BR>> =20
is=3D3D3D20<BR>>different=3D3D20< ;BR>> =
=3D20<BR>> =20
=
than</FONT></DIV><BR& gt;><DIV><FONT=3D20 <BR>&g=
t; =20
=3D3D<BR>>face=3D3D3D3DArial=3D3D20& ;lt;BR>> =
=3D20<BR>> =20
=
=3D<BR> >=3D3D<BR>>size=3D3D3D3D2> ;standard?</FONT><=
;/DIV><BR>&g=3D<BR> >t;<DIV><FO=3D3D<BR&g t;>=
;NT=3D3D20<BR>>=20
=3D20<BR>> face=3D3D3D3DArial=3D3D20<BR>> =
=3D20<BR>> =20
=
=3D<BR> >=3D3D<BR>>size=3D3D3D3D2> ;Thanks,</FONT></=
DIV><BR>>=3D<BR> ><DIV><FONT=3D3D<BR&g t;>=3D=
3D20<BR>>=20
=3D20<BR>> face=3D3D3D3DArial=3D3D20<BR>> =
=3D20<BR>> =20
=
=3D<BR> >size=3D3D3D3D2>Tom</FONT>&l t;/DIV><BR>>&l=
t;DIV><=3D<BR>>FONT=3D3D20<BR>>=20
=3D20<BR>> face=3D3D3D3DArial=20
size=3D3D3D3D2></FONT>=3D20<BR>> =20
=
=3D<BR> >=3D3D<BR>></DIV>& amp;lt;BR>><DIV><FO=
NT=3D3D20<BR>>&nbs=3D<BR>>p;=3D20 <BR>> =20
face=3D3D3D3DArial size=3D3D3D3D2></FONT>=3D20<BR>> =20
=
=3D<BR> >=3D3D<BR>></DIV>& amp;lt;BR>><DIV><FO=
NT=3D3D20<BR>>&nbs=3D<BR>>p;=3D20 <BR>> =20
size=3D3D3D3D2><BR><BR>I choose Polesoft Lockspam to=20
=3D<BR>>fight=3D20<BR>> =
=3D3D<BR>>spam,=3D3D20<BR> ;>=20
=3D20<BR>> =20
=
=3D<BR> >=3D3D<BR>>=3D3D3D<BR& ;gt;>and=3D3D3D20<BR>=
>you?<BR><A=3D<BR>>=3D3D3D20<BR>>href=3D3D3D3D "&l=
t;A=3D3D20<BR>>=20
=3D20<BR>> =20
=
=3D<BR>>=3D3D<BR>>href=3D3D3D'http://www.polesoft.com/refer.h=
tml">http://www.po=3D<BR> >lesoft.com/refer=3D3D<BR>>'& ;gt;h=
ttp://www.polesoft.com/refer.html">ht=3D<BR>>tp://www.polesoft.com/=
refer</A=3D3D<BR>>>=3D3D3 D<BR>>.html&=3D <BR>&=
gt;lt;/A>=3D3D20<BR>>=20
=3D20<BR>> =20
=
=3D<BR> >=3D3D<BR>></FONT> </DIV></BODY></=
HTML><BR>&=3D<BR> >gt;<BR>><BR>& lt;/=3D3D&l=
t;BR>>BLOCKQUOTE></BODY>& amp;lt;=3D <BR>>;/HTML><BR>=
;><BR>><BR>< ;/BLOCKQUOTE></BODY></HTML&g t=
;<BR>><BR>><BR></BLOCKQUOTE></BODY></HTML >
------=_NextPart_000_00EA_01C79444.9A6648B0--
|
|
|
|
| Re: Paris 3.0/XP MECs and 442s work nicely or no? Also Elco pin out. . . [message #84386 is a reply to message #84372] |
Sat, 12 May 2007 00:25 |
Aaron Allen
Messages: 1988
Registered: May 2008
|
Senior Member |
|
|
442?
20 bits on the analogs, 24 on the SpDif was the spec I believe.
AA
"Jeff Hoover" <jkhoover@excite.com> wrote in message news:46455183@linux...
> Tom
>
> Like ROd and others I'm going digital to a DAC1, but me it's off the
> S/PDIF on the 442. How many bits is that thing?
>
> I just like having all my 24 bit inputs off the master card for recording,
> and I'm too lazy to move things around after I record. I think either way
> will work. I cannot stress enough the importance of GREAT SYNC in this
> situation. I wrestled waaaaaay too many hours before I finally put in
> word clock cables all the same length and of good quality. Once I got
> them all the same hooked to the Lucid GenX, everything has been smooth
> sailing (except for the occasional experience of Auto tune starting up at
> the wrong sample rate. I really though I stunk as a singer until I looked
> up and saw it running a 48 on a 44.1 project!).
>
>
> JH
>
>
>> Jeff,
>> I did that a couple of weeks ago too and it stabilized Paris for sure.
>> I get crashes booting up Paris still for other reasons but once it's up
>> and running it is more stable on the Root C: . Thank you Dimitrios.
>> Those other changes D. suggested are still in the making for me.
>> Big stuff there!
>> I'd rather have a MEC on the A card for the 24 bit SPDIF. Are you
>> just monitoring 20 bit?
>> Tom
>> "Jeff Hoover" <jkhoover@excite.com <mailto:jkhoover@excite.com>>
>> wrote in message news:46452c27@linux...
>> Tom,
>>
>> Running a 4 card system:
>>
>> A 442
>> B 442
>> C Nada
>> D Mec with 2 modules
>>
>> Just cleaned up and reinstalled Paris directly off the root
>> (C:]ParisPro) a week and a half ago. Ben rock solid on 5 sessions do
>> far.
>>
>> JH
>>
>> Bruhl wrote:
>> > Hey Rod,
>> > That sounds promising. What cards do you have the
>> > Mecs and 442 connected to?
>> > Tom
>> > > >
>> > "Rod Lincoln" <rlincoln@nospam.kc.rr.com
>> <mailto:rlincoln@nospam.kc.rr.com>
>> > <mailto:rlincoln@nospam.kc.rr.com>> wrote in message
>> > news:46451438$1@linux...
>> >
>> > I've got 2 mecs and a 442 working here, no problems at all.
>> > I'm also clocking with the old Lucid genX word clock. 5
>> modules in
>> > one mec,
>> > 4 modules in the other. 1 adat card each. 6 eds cards, 3 UAD
>> cards,
>> > all in
>> > a magma. Oh yeah, a Lynx one in the computer also.
>> > Rod
>> > "Tom Bruhl" <arpegio@comcast.net <mailto:arpegio@comcast.net>
>> <mailto:arpegio@comcast.net>> wrote:
>> > >
>> > >
>> > >I'll be buying either two MECs or two 442s but don't want it
>> > >to mess my whole rig up if the 442s don't play nice.
>> > >I am using an older Lucid clock now with 2 Mecs already.
>> > >They each have five modules in them. The others may
>> > >see a single ADAT at most someday maybe.
>> > >
>> > >I can make the MECs fit in the machine room with the others
>> > >but the 442s would be a lot easier.
>> > >
>> > >Anyone know Deej?
>> > >
>> > >Also I have to find the pin config for a 56 pin EDAC/ELCO
>> ADAT
>> > >connector. I want to chop this bad boy off and solder 16
>> TRS
>> > >to it. Anyone know whether the ADAT wiring is different
>> than
>> > >standard?
>> > >Thanks,
>> > >Tom
>> > >
>> > >
>> > >
>> > >
>> > >I choose Polesoft Lockspam to fight spam, and you?
>> > >http://www.polesoft.com/refer.html > >
>> > ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
>> Transitional//EN">
>> > ><HTML><HEAD>
>> > ><META http-equiv=3DContent-Type content=3D"text/html; =
>> > >charset=3Diso-8859-1">
>> > ><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
>> > ><STYLE></STYLE>
>> > ></HEAD>
>> > ><BODY bgColor=3D#ffffff>
>> > ><DIV><FONT face=3DArial size=3D2>I'll be buying either two
>> MECs or
>> > two =
>> > >442s but=20
>> > >don't want it</FONT></DIV>
>> > ><DIV><FONT face=3DArial size=3D2>to mess my whole rig up if
>> the 442s =
>> > >don't play=20
>> > >nice.</FONT></DIV>
>> > ><DIV><FONT face=3DArial size=3D2>I am using an older Lucid
>> clock now =
>> > >with 2 Mecs=20
>> > >already.</FONT></DIV>
>> > ><DIV><FONT face=3DArial size=3D2>They each have five
>> modules in =
>> > >them. The=20
>> > >others may</FONT></DIV>
>> > ><DIV><FONT face=3DArial size=3D2>see a single ADAT at most
>> someday=20
>> > >maybe.</FONT></DIV>
>> > ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>> > ><DIV><FONT face=3DArial size=3D2>I can make the MECs fit in
>> the
>> > machine
>> > =
>> > >room with=20
>> > >the others</FONT></DIV>
>> > ><DIV><FONT face=3DArial size=3D2>but the 442s would be
>> </FONT><FONT =
>> > >face=3DArial=20
>> > >size=3D2>a lot easier.</FONT></DIV>
>> > ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>> > ><DIV><FONT face=3DArial size=3D2>Anyone know
>> Deej?</FONT></DIV>
>> > ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>> > ><DIV><FONT face=3DArial size=3D2>Also I have to find the pin
>> > config for
>> > =
>> > >a 56 pin=20
>> > >EDAC/ELCO ADAT</FONT></DIV>
>> > ><DIV><FONT face=3DArial size=3D2>connector. I want to chop
>> this =
>> > >bad boy off=20
>> > >and solder 16 TRS</FONT></DIV>
>> > ><DIV><FONT face=3DArial size=3D2>to it. Anyone know whether
>> the =
>> > >ADAT wiring is=20
>> > >different than</FONT></DIV>
>> > ><DIV><FONT face=3DArial size=3D2>standard?</FONT></DIV>
>> > ><DIV><FONT face=3DArial size=3D2>Thanks,</FONT></DIV>
>> > ><DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
>> > ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>> > ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>> > ><DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to
>> fight
>> > spam, =
>> > >and=20
>> > >you?<BR><A=20
>> >
>> >href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer
>> <http://www.polesoft.com/refer.html">http://www.polesoft.com/refer>
>> >
>> <http://www.polesoft.com/refer.html">http://www.polesoft.com/refer
>> <http://www.polesoft.com/refer.html">http://www.polesoft.com/refer>>=
>> > >.html</A> </FONT></DIV></BODY></HTML>
>> > >
>> > >
|
|
|
|
| Re: Paris 3.0/XP MECs and 442s work nicely or no? Also Elco pin out. . . [message #84387 is a reply to message #84380] |
Sat, 12 May 2007 00:28 |
Deej [4]
Messages: 1292
Registered: January 2007
|
Senior Member |
|
|
IIRC 442's are initialized differently from the MEC and need to be hung off
Card A to work reliablein a multi interface setup. this will necessitate
using the 20 bit I/O for monitoring the mix.
"Dimitrios" <musurgio@otenet.gr> wrote in message news:46456534$1@linux...
>
> Hi Tom,
> When I tried this 442 and mec combination I only found a working clocked
> system if 442 was a master so 20 bits versus 24 was inportant to me for
> monitoring
> ! (I still record only 16 bits !).
> What though was evident is that I could NEVER have the ins and outs of 442
> working correctly.
> You know sometimes we use 442 along mec and we mostly don't use much of
> 442
> except for a spdif or something.
> It would be nice if someone could CHECK that in a multi mec 442 system ALL
> 442's ins and outs along with mec's are working correctly.
> I know this is much to ask but Tom (and I at least) would love that kind
> of testing info.
> A 442 would be a great addition to me IF mec could be main card A and all
> ins and outs of everything would work.
> Is this an XP problem or is it the same as in win98 or Me ?
> Regards,
> Dimitrios
>
> "Tom Bruhl" <arpegio@comcast.net> wrote:
>>
>>
>>What do you guys think,
>>What are my chances of getting two 442s in the mix
>>without my Mecs losing some of their cards?
>>T.
>>
>> "Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message =
>>news:46453f51$1@linux...
>>
>> Mec 1 on card A, 442 on Card B, Mec 2 on Card F (my last card)
>> I'm running spdif out of Mec 1 to a DAC 1
>> Rod
>> "Tom Bruhl" <arpegio@comcast.net> wrote:
>> >
>> >
>> >Hey Rod,
>> >That sounds promising. What cards do you have the
>> >Mecs and 442 connected to?
>> >Tom
>> >
>> >
>> > "Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message =3D
>> >news:46451438$1@linux...
>> >
>> > I've got 2 mecs and a 442 working here, no problems at all.
>> > I'm also clocking with the old Lucid genX word clock. 5 modules in
> =
>>one
>> =3D
>> >mec,
>> > 4 modules in the other. 1 adat card each. 6 eds cards, 3 UAD cards,
> =
>>=3D
>> >all in
>> > a magma. Oh yeah, a Lynx one in the computer also.
>> > Rod
>> > "Tom Bruhl" <arpegio@comcast.net> wrote:
>> > >
>> > >
>> > >I'll be buying either two MECs or two 442s but don't want it
>> > >to mess my whole rig up if the 442s don't play nice.
>> > >I am using an older Lucid clock now with 2 Mecs already.
>> > >They each have five modules in them. The others may
>> > >see a single ADAT at most someday maybe.
>> > >
>> > >I can make the MECs fit in the machine room with the others
>> > >but the 442s would be a lot easier.
>> > >
>> > >Anyone know Deej?
>> > >
>> > >Also I have to find the pin config for a 56 pin EDAC/ELCO ADAT
>> > >connector. I want to chop this bad boy off and solder 16 TRS
>> > >to it. Anyone know whether the ADAT wiring is different than
>> > >standard?
>> > >Thanks,
>> > >Tom
>> > >
>> > >
>> > >
>> > >
>> > >I choose Polesoft Lockspam to fight spam, and you?
>> > >http://www.polesoft.com/refer.html =3D20
>> > >
>> > ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
>> > ><HTML><HEAD>
>> > ><META http-equiv=3D3D3DContent-Type content=3D3D3D"text/html; =
>>=3D3D
>> > >charset=3D3D3Diso-8859-1">
>> > ><META content=3D3D3D"MSHTML 6.00.2800.1400" name=3D3D3DGENERATOR>
>> > ><STYLE></STYLE>
>> > ></HEAD>
>> > ><BODY bgColor=3D3D3D#ffffff>
>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>I'll be buying either two
> =
>>MECs =3D
>> >or two =3D3D
>> > >442s but=3D3D20
>> > >don't want it</FONT></DIV>
>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>to mess my whole rig up =
>>if the =3D
>> >442s =3D3D
>> > >don't play=3D3D20
>> > >nice.</FONT></DIV>
>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>I am using an older Lucid
> =
>>clock
>> =3D
>> >now =3D3D
>> > >with 2 Mecs=3D3D20
>> > >already.</FONT></DIV>
>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>They each have five =
>>modules in =3D
>> >=3D3D
>> > >them. The=3D3D20
>> > >others may</FONT></DIV>
>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>see a single ADAT at most
> =
>>=3D
>> >someday=3D3D20
>> > >maybe.</FONT></DIV>
>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>I can make the MECs fit =
>>in the =3D
>> >machine
>> > =3D3D
>> > >room with=3D3D20
>> > >the others</FONT></DIV>
>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>but the 442s would be =3D
>> ></FONT><FONT =3D3D
>> > >face=3D3D3DArial=3D3D20
>> > >size=3D3D3D2>a lot easier.</FONT></DIV>
>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Anyone know =
>>Deej?</FONT></DIV>
>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Also I have to find the =
>>pin =3D
>> >config for
>> > =3D3D
>> > >a 56 pin=3D3D20
>> > >EDAC/ELCO ADAT</FONT></DIV>
>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>connector. I want to chop
> =
>>this =3D
>> >=3D3D
>> > >bad boy off=3D3D20
>> > >and solder 16 TRS</FONT></DIV>
>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>to it. Anyone know =
>>whether the =3D
>> >=3D3D
>> > >ADAT wiring is=3D3D20
>> > >different than</FONT></DIV>
>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>standard?</FONT></DIV>
>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Thanks,</FONT></DIV>
>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Tom</FONT></DIV>
>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
>> > ><DIV><FONT size=3D3D3D2><BR><BR>I choose Polesoft Lockspam to =
>>fight =3D
>> >spam, =3D3D
>> > >and=3D3D20
>> > >you?<BR><A=3D3D20
>> > =3D
>> =
>>>>href=3D3D3D"http://www.polesoft.com/refer.html">http://www.polesoft.com=
>>/re=3D
>> >fer=3D3D
>> > >.html</A> </FONT></DIV></BODY></HTML>
>> > >
>> > >
>> >
>> >
>> ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
>> ><HTML><HEAD>
>> ><META http-equiv=3D3DContent-Type content=3D3D"text/html; =3D
>> >charset=3D3Diso-8859-1">
>> ><META content=3D3D"MSHTML 6.00.2800.1400" name=3D3DGENERATOR>
>> ><STYLE></STYLE>
>> ></HEAD>
>> ><BODY bgColor=3D3D#ffffff>
>> ><DIV><FONT face=3D3DArial size=3D3D2>Hey Rod,</FONT></DIV>
>> ><DIV><FONT face=3D3DArial size=3D3D2>That sounds promising. What =
>>cards =3D
>> >do you have=3D20
>> >the</FONT></DIV>
>> ><DIV><FONT face=3D3DArial size=3D3D2>Mecs and 442 connected =
>>to?</FONT></DIV>
>> ><DIV><FONT face=3D3DArial size=3D3D2>Tom</FONT></DIV>
>> ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
>> ><DIV> </DIV>
>> ><BLOCKQUOTE=3D20
>> >style=3D3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>>=3D
>> >BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
>> > <DIV>"Rod Lincoln" <<A=3D20
>> > =3D
>> =
>>>href=3D3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A=
>>>&g=3D
>> >t;=3D20
>> > wrote in message <A=3D20
>> > =3D
>> =
>>>href=3D3D"news:46451438$1@linux">news:46451438$1@linux</A>...</DIV><BR>I=
>>'ve=3D
>> > got 2=3D20
>> > mecs and a 442 working here, no problems at all.<BR>I'm also =
>>clocking
>> =3D
>> >with the=3D20
>> > old Lucid genX word clock. 5 modules in one mec,<BR>4 modules in =
>>the =3D
>> >other. 1=3D20
>> > adat card each. 6 eds cards, 3 UAD cards, all in<BR>a magma. Oh =
>>yeah,
>> =3D
>> >a Lynx=3D20
>> > one in the computer also.<BR>Rod<BR>"Tom Bruhl" <<A=3D20
>> > href=3D3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20
>> > wrote:<BR>><BR>><BR>>I'll be buying either two MECs or two =3D
>> >442s but=3D20
>> > don't want it<BR>>to mess my whole rig up if the 442s don't =
>>play=3D20
>> > nice.<BR>>I am using an older Lucid clock now with 2 Mecs=3D20
>> > already.<BR>>They each have five modules in them. The others=3D20
>> > may<BR>>see a single ADAT at most someday maybe.<BR>><BR>>I =3D
>> >can make=3D20
>> > the MECs fit in the machine room with the others<BR>>but the 442s =
>>=3D
>> >would be=3D20
>> > a lot easier.<BR>><BR>>Anyone know Deej?<BR>><BR>>Also I =3D
>> >have to=3D20
>> > find the pin config for a 56 pin EDAC/ELCO =3D
>> >ADAT<BR>>connector. I want=3D20
>> > to chop this bad boy off and solder 16 TRS<BR>>to it. Anyone =3D
>> >know=3D20
>> > whether the ADAT wiring is different=3D20
>> > =3D
>> >than<BR>>standard?<BR>>Thanks,<BR>>Tom<BR>><BR>><BR >><B=3D
>> >R>><BR>>I=3D20
>> > choose Polesoft Lockspam to fight spam, and=3D20
>> > you?<BR>>http://www.polesoft.com/refer.html =3D20
>> > <BR>><BR>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0=3D20
>> > Transitional//EN"><BR>><HTML><HEAD><BR>><META=3D20
>> > http-equiv=3D3D3DContent-Type content=3D3D3D"text/html;=3D20
>> > =3D3D<BR>>charset=3D3D3Diso-8859-1"><BR>><META =3D
>> >content=3D3D3D"MSHTML=3D20
>> > 6.00.2800.1400"=3D20
>> > =3D
>> >name=3D3D3DGENERATOR><BR>><STYLE></STYLE><BR>></HEA=3D
>> >D><BR>><BODY=3D20
>> > bgColor=3D3D3D#ffffff><BR>><DIV><FONT face=3D3D3DArial =3D
>> >size=3D3D3D2>I'll=3D20
>> > be buying either two MECs or two =3D3D<BR>>442s =
>>but=3D3D20<BR>>don't =3D
>> >want=3D20
>> > it</FONT></DIV><BR>><DIV><FONT face=3D3D3DArial=3D20
>> > size=3D3D3D2>to mess my whole rig up if the 442s =
>>=3D3D<BR>>don't=3D20
>> > =3D
>> >play=3D3D20<BR>>nice.</FONT></DIV><BR>><DIV><FON=3D
>> >T=3D20
>> > face=3D3D3DArial size=3D3D3D2>I am using an older Lucid clock now =
>>=3D
>> >=3D3D<BR>>with 2=3D20
>> > =3D
>> >Mecs=3D3D20<BR>>already.</FONT></DIV><BR>><DIV><=3D
>> >FONT=3D20
>> > face=3D3D3DArial size=3D3D3D2>They each have five modules in =3D
>> >=3D3D<BR>>them.=3D20
>> > The=3D3D20<BR>>others =3D
>> >may</FONT></DIV><BR>><DIV><FONT=3D20
>> > face=3D3D3DArial size=3D3D3D2>see a single ADAT at most=3D20
>> > =3D
>> >someday=3D3D20<BR>>maybe.</FONT></DIV><BR>><DIV><=3D
>> >;FONT=3D20
>> > face=3D3D3DArial size=3D3D3D2></FONT> =3D
>> ></DIV><BR>><DIV><FONT=3D20
>> > face=3D3D3DArial size=3D3D3D2>I can make the MECs fit in the=3D20
>> > machine<BR>=3D3D<BR>>room with=3D3D20<BR>>the=3D20
>> > others</FONT></DIV><BR>><DIV><FONT =3D
>> >face=3D3D3DArial=3D20
>> > size=3D3D3D2>but the 442s would be </FONT><FONT=3D20
>> > =3D3D<BR>>face=3D3D3DArial=3D3D20<BR>>size=3D3D3D2>a lot=3D20
>> > easier.</FONT></DIV><BR>><DIV><FONT =3D
>> >face=3D3D3DArial=3D20
>> > size=3D3D3D2></FONT> </DIV><BR>><DIV><FONT =3D
>> >face=3D3D3DArial=3D20
>> > size=3D3D3D2>Anyone know=3D20
>> > Deej?</FONT></DIV><BR>><DIV><FONT =3D
>> >face=3D3D3DArial=3D20
>> > size=3D3D3D2></FONT> </DIV><BR>><DIV><FONT =3D
>> >face=3D3D3DArial=3D20
>> > size=3D3D3D2>Also I have to find the pin config for<BR>=3D3D<BR>>a
> =
>>=3D
>> >56=3D20
>> > pin=3D3D20<BR>>EDAC/ELCO=3D20
>> > ADAT</FONT></DIV><BR>><DIV><FONT =3D
>> >face=3D3D3DArial=3D20
>> > size=3D3D3D2>connector. I want to chop this =3D3D<BR>>bad boy =3D
>> >off=3D3D20<BR>>and=3D20
>> > solder 16 TRS</FONT></DIV><BR>><DIV><FONT =3D
>> >face=3D3D3DArial=3D20
>> > size=3D3D3D2>to it. Anyone know whether the =3D3D<BR>>ADAT =
>>wiring=3D20
>> > is=3D3D20<BR>>different=3D20
>> > than</FONT></DIV><BR>><DIV><FONT =3D
>> >face=3D3D3DArial=3D20
>> > =3D
>> >size=3D3D3D2>standard?</FONT></DIV><BR>><DIV><FO=3D
>> >NT=3D20
>> > face=3D3D3DArial=3D20
>> > =3D
>> >size=3D3D3D2>Thanks,</FONT></DIV><BR>><DIV><FONT=3D
>> >=3D20
>> > face=3D3D3DArial=3D20
>> > size=3D3D3D2>Tom</FONT></DIV><BR>><DIV><FONT=3D20
>> > face=3D3D3DArial size=3D3D3D2></FONT> =3D
>> ></DIV><BR>><DIV><FONT=3D20
>> > face=3D3D3DArial size=3D3D3D2></FONT> =3D
>> ></DIV><BR>><DIV><FONT=3D20
>> > size=3D3D3D2><BR><BR>I choose Polesoft Lockspam to fight =3D
>> >spam,=3D20
>> > =3D
>> >=3D3D<BR>>and=3D3D20<BR>>you?<BR><A=3D3D20<BR>>href=3D3D3D "<A=3D20
>> > =3D
>> =
>>>href=3D3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/re=
>>fer=3D
>> =
>>>'>http://www.polesoft.com/refer.html">http://www.polesoft.com/refer</A=3D=
>>
>> >>=3D3D<BR>>.html</A>=3D20
>> > =3D
>> ></FONT></DIV></BODY></HTML><BR>><BR>><BR></=3D
>> >BLOCKQUOTE></BODY></HTML>
>> >
>> >
>>
>>
>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
>><HTML><HEAD>
>><META http-equiv=3DContent-Type content=3D"text/html; =
>>charset=3Diso-8859-1">
>><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
>><STYLE></STYLE>
>></HEAD>
>><BODY bgColor=3D#ffffff>
>><DIV><FONT face=3DArial size=3D2>What do you guys think,</FONT></DIV>
>><DIV><FONT face=3DArial size=3D2>What are my chances of getting two 442s
> =
>>in the=20
>>mix</FONT></DIV>
>><DIV><FONT face=3DArial size=3D2>without my Mecs losing some of=20
>>their cards?</FONT></DIV>
>><DIV><FONT face=3DArial size=3D2>T.</FONT></DIV>
>><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>><BLOCKQUOTE=20
>>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
>> <DIV>"Rod Lincoln" <<A=20
>> =
>>href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&g=
>>t;=20
>> wrote in message <A=20
>> =
>>href=3D"news:46453f51$1@linux">news:46453f51$1@linux</A>...</DIV><BR>Mec
> =
>>1 on=20
>> card A, 442 on Card B, Mec 2 on Card F (my last card)<BR>I'm running =
>>spdif out=20
>> of Mec 1 to a DAC 1<BR>Rod<BR>"Tom Bruhl" <<A=20
>> href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=20
>> wrote:<BR>><BR>><BR>>Hey Rod,<BR>>That sounds =
>>promising. =20
>> What cards do you have the<BR>>Mecs and 442 connected=20
>> to?<BR>>Tom<BR>><BR>><BR>> "Rod Lincoln" <<A=20
>> =
>>href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&g=
>>t;=20
>> wrote in message =
>>=3D<BR>>news:46451438$1@linux...<BR>><BR>> I've=20
>> got 2 mecs and a 442 working here, no problems at all.<BR>> =
>>I'm also=20
>> clocking with the old Lucid genX word clock. 5 modules in=20
>> one<BR>=3D<BR>>mec,<BR>> 4 modules in the other. 1 adat =
>>card each. 6=20
>> eds cards, 3 UAD cards, =3D<BR>>all in<BR>> a magma. Oh =
>>yeah, a Lynx=20
>> one in the computer also.<BR>> Rod<BR>> "Tom Bruhl" =
>><<A=20
>> href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=20
>> wrote:<BR>> ><BR>> ><BR>> >I'll be =
>>buying=20
>> either two MECs or two 442s but don't want it<BR>> >to =
>>mess my=20
>> whole rig up if the 442s don't play nice.<BR>> >I am using =
>>an=20
>> older Lucid clock now with 2 Mecs already.<BR>> >They each =
>>have=20
>> five modules in them. The others may<BR>> >see a =
>>single ADAT=20
>> at most someday maybe.<BR>> ><BR>> >I can make =
>>the=20
>> MECs fit in the machine room with the others<BR>> >but the =
>>442s=20
>> would be a lot easier.<BR>> ><BR>> >Anyone =
>>know=20
>> Deej?<BR>> ><BR>> >Also I have to find the pin =
>>config=20
>> for a 56 pin EDAC/ELCO ADAT<BR>> >connector. I want =
>>to chop=20
>> this bad boy off and solder 16 TRS<BR>> >to it. =
>>Anyone know=20
>> whether the ADAT wiring is different than<BR>> =20
>> >standard?<BR>> >Thanks,<BR>> =
>>>Tom<BR>> =20
>> ><BR>> ><BR>> ><BR>> =
>>><BR>> =20
>> >I choose Polesoft Lockspam to fight spam, and you?<BR>> =20
>> >http://www.polesoft.com/refer.html =3D20<BR>> =20
>> ><BR>> ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0=20
>> Transitional//EN"><BR>> =
>>><HTML><HEAD><BR>> =20
>> ><META http-equiv=3D3D3DContent-Type content=3D3D3D"text/html;=20
>> =3D3D<BR>> >charset=3D3D3Diso-8859-1"><BR>> =
>>><META=20
>> content=3D3D3D"MSHTML 6.00.2800.1400" =
>>name=3D3D3DGENERATOR><BR>> =20
>> ><STYLE></STYLE><BR>> =
>>></HEAD><BR>> =20
>> ><BODY bgColor=3D3D3D#ffffff><BR>> =
>>><DIV><FONT=20
>> face=3D3D3DArial size=3D3D3D2>I'll be buying either two MECs =
>>=3D<BR>>or two=20
>> =3D3D<BR>> >442s but=3D3D20<BR>> >don't want=20
>> it</FONT></DIV><BR>> ><DIV><FONT=20
>> face=3D3D3DArial size=3D3D3D2>to mess my whole rig up if the =
>>=3D<BR>>442s=20
>> =3D3D<BR>> >don't play=3D3D20<BR>> =20
>> >nice.</FONT></DIV><BR>> =
>>><DIV><FONT=20
>> face=3D3D3DArial size=3D3D3D2>I am using an older Lucid =
>>clock<BR>=3D<BR>>now=20
>> =3D3D<BR>> >with 2 Mecs=3D3D20<BR>> =20
>> >already.</FONT></DIV><BR>> =
>>><DIV><FONT=20
>> face=3D3D3DArial size=3D3D3D2>They each have five modules in=20
>> =3D<BR>>=3D3D<BR>> >them. The=3D3D20<BR>> =
>>>others=20
>> may</FONT></DIV><BR>> ><DIV><FONT=20
>> face=3D3D3DArial size=3D3D3D2>see a single ADAT at most=20
>> =3D<BR>>someday=3D3D20<BR>> =20
>> >maybe.</FONT></DIV><BR>> =
>>><DIV><FONT=20
>> face=3D3D3DArial size=3D3D3D2></FONT> =
>></DIV><BR>> =20
>> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>I can make =
>>the MECs fit=20
>> in the =3D<BR>>machine<BR>> =3D3D<BR>> >room=20
>> with=3D3D20<BR>> >the =
>>others</FONT></DIV><BR>> =20
>> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>but the 442s =
>>would be=20
>> =3D<BR>></FONT><FONT =3D3D<BR>> =20
>> >face=3D3D3DArial=3D3D20<BR>> >size=3D3D3D2>a lot=20
>> easier.</FONT></DIV><BR>> ><DIV><FONT =
>>
>> face=3D3D3DArial size=3D3D3D2></FONT> =
>></DIV><BR>> =20
>> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Anyone know=20
>> Deej?</FONT></DIV><BR>> ><DIV><FONT=20
>> face=3D3D3DArial size=3D3D3D2></FONT> =
>></DIV><BR>> =20
>> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Also I have =
>>to find the=20
>> pin =3D<BR>>config for<BR>> =3D3D<BR>> >a 56=20
>> pin=3D3D20<BR>> >EDAC/ELCO=20
>> ADAT</FONT></DIV><BR>> ><DIV><FONT=20
>> face=3D3D3DArial size=3D3D3D2>connector. I want to chop this=20
>> =3D<BR>>=3D3D<BR>> >bad boy off=3D3D20<BR>> =
>>>and solder=20
>> 16 TRS</FONT></DIV><BR>> ><DIV><FONT=20
>> face=3D3D3DArial size=3D3D3D2>to it. Anyone know whether the=20
>> =3D<BR>>=3D3D<BR>> >ADAT wiring is=3D3D20<BR>> =
>>>different=20
>> than</FONT></DIV><BR>> ><DIV><FONT=20
>> face=3D3D3DArial =
>>size=3D3D3D2>standard?</FONT></DIV><BR>> =20
>> ><DIV><FONT face=3D3D3DArial=20
>> size=3D3D3D2>Thanks,</FONT></DIV><BR>> =20
>> ><DIV><FONT face=3D3D3DArial=20
>> size=3D3D3D2>Tom</FONT></DIV><BR>> =20
>> ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> =
>>
>> </DIV><BR>> ><DIV><FONT face=3D3D3DArial=20
>> size=3D3D3D2></FONT> </DIV><BR>> =
>>><DIV><FONT=20
>> size=3D3D3D2><BR><BR>I choose Polesoft Lockspam to =
>>fight=20
>> =3D<BR>>spam, =3D3D<BR>> >and=3D3D20<BR>> =20
>> >you?<BR><A=3D3D20<BR>> =
>>=3D<BR>>>href=3D3D3D"<A=20
>> =
>>href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/re'>h=
>>ttp://www.polesoft.com/refer.html">http://www.polesoft.com/re</A>=3D<B=
>>R>>fer=3D3D<BR>> =20
>> >.html</A>=20
>> </FONT></DIV></BODY></HTML><BR>> =20
>> ><BR>> ><BR>><BR>><BR>><!DOCTYPE HTML =
>>PUBLIC=20
>> "-//W3C//DTD HTML 4.0=20
>> Transitional//EN"><BR>><HTML><HEAD><BR>><META=20
>> http-equiv=3D3DContent-Type content=3D3D"text/html;=20
>> =3D<BR>>charset=3D3Diso-8859-1"><BR>><META =
>>content=3D3D"MSHTML=20
>> 6.00.2800.1400"=20
>> =
>>name=3D3DGENERATOR><BR>><STYLE></STYLE><BR>></HEA=
>>D><BR>><BODY=20
>> bgColor=3D3D#ffffff><BR>><DIV><FONT face=3D3DArial =
>>size=3D3D2>Hey=20
>> Rod,</FONT></DIV><BR>><DIV><FONT =
>>face=3D3DArial=20
>> size=3D3D2>That sounds promising. What cards =3D<BR>>do you=20
>> =
>>have=3D20<BR>>the</FONT></DIV><BR>><DIV><FONT =
>>
>> face=3D3DArial size=3D3D2>Mecs and 442 connected=20
>> to?</FONT></DIV><BR>><DIV><FONT face=3D3DArial =
>>
>> size=3D3D2>Tom</FONT></DIV><BR>><DIV><FONT=20
>> face=3D3DArial size=3D3D2></FONT> =
>></DIV><BR>><DIV>=20
>> =
>></DIV><BR>><BLOCKQUOTE=3D20<BR>>style=3D3D"PADDING-RIGHT: =
>>0px;=20
>> PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =3D<BR>>BORDER-LEFT: #000000 =
>>2px solid;=20
>> MARGIN-RIGHT: 0px"><BR>> <DIV>"Rod Lincoln"=20
>> <<A=3D20<BR>> =3D<BR>>href=3D3D"<A=20
>> =
>>href=3D'mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&a=
>>mp;g'>mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</=
>>A>&g</A>=3D<BR>>t;=3D20<BR>> =20
>> wrote in message <A=3D20<BR>> =3D<BR>>href=3D3D"<A=20
>> =
>>href=3D"news:46451438$1@linux">news:46451438$1@linux</A>...</DIV><BR=
>>>I've">news:46451438$1@linux">news:46451438$1@linux</A>...</D=
>>IV><BR>I've</A>=3D<BR>>=20
>> got 2=3D20<BR>> mecs and a 442 working here, no problems at=20
>> all.<BR>I'm also clocking<BR>=3D<BR>>with =
>>the=3D20<BR>> old=20
>> Lucid genX word clock. 5 modules in one mec,<BR>4 modules in the =
>>
>> =3D<BR>>other. 1=3D20<BR>> adat card each. 6 eds cards, 3 =
>>UAD cards,=20
>> all in<BR>a magma. Oh yeah,<BR>=3D<BR>>a =
>>Lynx=3D20<BR>> one in=20
>> the computer also.<BR>Rod<BR>"Tom Bruhl"=20
>> <<A=3D20<BR>> href=3D3D"<A=20
>> =
>>href=3D'mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20'>mailto=
>>:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20</A><BR>&g=
>>t; =20
>> wrote:<BR>><BR>><BR>>I'll be buying either =
>>two MECs=20
>> or two =3D<BR>>442s but=3D20<BR>> don't want =
>>it<BR>>to mess=20
>> my whole rig up if the 442s don't play=3D20<BR>> =
>>nice.<BR>>I=20
>> am using an older Lucid clock now with 2 Mecs=3D20<BR>> =20
>> already.<BR>>They each have five modules in them. The=20
>> others=3D20<BR>> may<BR>>see a single ADAT at most =
>>someday=20
>> maybe.<BR>><BR>>I =3D<BR>>can =
>>make=3D20<BR>> the=20
>> MECs fit in the machine room with the others<BR>>but the 442s =
>>
>> =3D<BR>>would be=3D20<BR>> a lot=20
>> easier.<BR>><BR>>Anyone know=20
>> Deej?<BR>><BR>>Also I =3D<BR>>have =
>>to=3D20<BR>> find=20
>> the pin config for a 56 pin EDAC/ELCO =
>>=3D<BR>>ADAT<BR>>connector. I=20
>> want=3D20<BR>> to chop this bad boy off and solder 16=20
>> TRS<BR>>to it. Anyone =3D<BR>>know=3D20<BR>> =
>>whether the ADAT=20
>> wiring is different=3D20<BR>> =20
>> =
>>=3D<BR>>than<BR>>standard?<BR>>Thanks,<BR>>=
>>Tom<BR>><BR>><BR>><B=3D<BR>>R>><=
>>;BR>>I=3D20<BR>> =20
>> choose Polesoft Lockspam to fight spam, and=3D20<BR>> =20
>> you?<BR>>http://www.polesoft.com/refer.html =
>>=3D20<BR>> =20
>> <BR>><BR>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML =
>>
>> 4.0=3D20<BR>> =20
>> =
>>Transitional//EN"><BR>><HTML><HEAD><BR>>=
>><META=3D20<BR>> =20
>> http-equiv=3D3D3DContent-Type =
>>content=3D3D3D"text/html;=3D20<BR>> =20
>> =3D3D<BR>>charset=3D3D3Diso-8859-1"><BR>><META =
>>
>> =3D<BR>>content=3D3D3D"MSHTML=3D20<BR>> =
>>6.00.2800.1400"=3D20<BR>> =20
>> =
>>=3D<BR>>name=3D3D3DGENERATOR><BR>><STYLE></STYLE&=
>>gt;<BR>></HEA=3D<BR>>D><BR>><BODY=3D20<BR>&=
>>gt; =20
>> bgColor=3D3D3D#ffffff><BR>><DIV><FONT =
>>face=3D3D3DArial=20
>> =3D<BR>>size=3D3D3D2>I'll=3D20<BR>> be buying either =
>>two MECs or two=20
>> =3D3D<BR>>442s but=3D3D20<BR>>don't=20
>> =3D<BR>>want=3D20<BR>> =20
>> it</FONT></DIV><BR>><DIV><FONT=20
>> face=3D3D3DArial=3D20<BR>> size=3D3D3D2>to mess my whole =
>>rig up if the=20
>> 442s =3D3D<BR>>don't=3D20<BR>> =20
>> =
>>=3D<BR>>play=3D3D20<BR>>nice.</FONT></DIV><BR&=
>>gt;><DIV><FON=3D<BR>>T=3D20<BR>> =20
>> face=3D3D3DArial size=3D3D3D2>I am using an older Lucid clock now=20
>> =3D<BR>>=3D3D<BR>>with 2=3D20<BR>> =20
>> =
>>
> =3D<BR>>Mecs=3D3D20<BR>>already.</FONT></DIV><=
>>BR>><DIV><=3D<BR>>FONT=3D20<BR>> =20
>> face=3D3D3DArial size=3D3D3D2>They each have five modules in=20
>> =3D<BR>>=3D3D<BR>>them.=3D20<BR>> =
>>The=3D3D20<BR>>others=20
>> =
>>=3D<BR>>may</FONT></DIV><BR>><DIV><FONT=3D=
>>20<BR>> =20
>> face=3D3D3DArial size=3D3D3D2>see a single ADAT at =
>>most=3D20<BR>> =20
>> =
>>=3D<BR>>someday=3D3D20<BR>>maybe.</FONT></DIV><=
>>;BR>><DIV><=3D<BR>>;FONT=3D20<BR>> =20
>> face=3D3D3DArial size=3D3D3D2></FONT>=20
>> =
>>=3D<BR>></DIV><BR>><DIV><FONT=3D20<BR>>&nbs=
>>p;=20
>> face=3D3D3DArial size=3D3D3D2>I can make the MECs fit in =
>>the=3D20<BR>> =20
>> machine<BR>=3D3D<BR>>room=20
>> with=3D3D20<BR>>the=3D20<BR>> =20
>> others</FONT></DIV><BR>><DIV><FONT=20
>> =3D<BR>>face=3D3D3DArial=3D20<BR>> size=3D3D3D2>but the =
>>442s would be=20
>> </FONT><FONT=3D20<BR>> =20
>> =
>>=3D3D<BR>>face=3D3D3DArial=3D3D20<BR>>size=3D3D3D2>a=
>>=20
>> lot=3D20<BR>> =20
>> easier.</FONT></DIV><BR>><DIV><FONT=20
>> =3D<BR>>face=3D3D3DArial=3D20<BR>> =
>>size=3D3D3D2></FONT>=20
>> </DIV><BR>><DIV><FONT=20
>> =3D<BR>>face=3D3D3DArial=3D20<BR>> size=3D3D3D2>Anyone=20
>> know=3D20<BR>> =20
>> Deej?</FONT></DIV><BR>><DIV><FONT=20
>> =3D<BR>>face=3D3D3DArial=3D20<BR>> =
>>size=3D3D3D2></FONT>=20
>> </DIV><BR>><DIV><FONT=20
>> =3D<BR>>face=3D3D3DArial=3D20<BR>> size=3D3D3D2>Also I =
>>have to find the=20
>> pin config for<BR>=3D3D<BR>>a =
>>=3D<BR>>56=3D20<BR>> =20
>> pin=3D3D20<BR>>EDAC/ELCO=3D20<BR>> =20
>> ADAT</FONT></DIV><BR>><DIV><FONT=20
>> =3D<BR>>face=3D3D3DArial=3D20<BR>> =
>>size=3D3D3D2>connector. I want to=20
>> chop this =3D3D<BR>>bad boy=20
>> =3D<BR>>off=3D3D20<BR>>and=3D20<BR>> solder 16=20
>> TRS</FONT></DIV><BR>><DIV><FONT=20
>> =3D<BR>>face=3D3D3DArial=3D20<BR>> size=3D3D3D2>to it. =
>>Anyone know=20
>> whether the =3D3D<BR>>ADAT wiring=3D20<BR>> =20
>> is=3D3D20<BR>>different=3D20<BR>> =20
>> than</FONT></DIV><BR>><DIV><FONT=20
>> =3D<BR>>face=3D3D3DArial=3D20<BR>> =20
>> =
>>=3D<BR>>size=3D3D3D2>standard?</FONT></DIV><BR>&g=
>>t;<DIV><FO=3D<BR>>NT=3D20<BR>> =20
>> face=3D3D3DArial=3D20<BR>> =20
>> =
>>=3D<BR>>size=3D3D3D2>Thanks,</FONT></DIV><BR>>=
>><DIV><FONT=3D<BR>>=3D20<BR>> =20
>> face=3D3D3DArial=3D20<BR>> =20
>> =
>>size=3D3D3D2>Tom</FONT></DIV><BR>><DIV><=
>>FONT=3D20<BR>> =20
>> face=3D3D3DArial size=3D3D3D2></FONT>=20
>> =
>>=3D<BR>></DIV><BR>><DIV><FONT=3D20<BR>>&nbs=
>>p;=20
>> face=3D3D3DArial size=3D3D3D2></FONT>=20
>> =
>>=3D<BR>></DIV><BR>><DIV><FONT=3D20<BR>>&nbs=
>>p;=20
>> size=3D3D3D2><BR><BR>I choose Polesoft Lockspam to =
>>fight=20
>> =3D<BR>>spam,=3D20<BR>> =20
>> =
>>=3D<BR>>=3D3D<BR>>and=3D3D20<BR>>you?<BR><A=
>>=3D3D20<BR>>href=3D3D3D"<A=3D20<BR>> =20
>> =
>>=3D<BR>>href=3D3D'http://www.polesoft.com/refer.html">http://www.po=
>>lesoft.com/refer=3D<BR>>'>http://www.polesoft.com/refer.html">ht=
>>tp://www.polesoft.com/refer</A=3D<BR>>>=3D3D<BR>>.html&=
>>lt;/A>=3D20<BR>> =20
>> =
>>=3D<BR>></FONT></DIV></BODY></HTML><BR>&=
>>gt;<BR>><BR></=3D<BR>>BLOCKQUOTE></BODY><=
>>;/HTML><BR>><BR>><BR></BLOCKQUOTE></BODY></HTML>
>>
>>
>
|
|
|
|
| Re: Paris 3.0/XP MECs and 442s work nicely or no? Also Elco pin out. . . [message #84388 is a reply to message #84386] |
Sat, 12 May 2007 00:30 |
Deej [4]
Messages: 1292
Registered: January 2007
|
Senior Member |
|
|
Nope.20 bits on all I/O. the MEC has 24 bit SPdif and 20 bit analog, until
you start adding 24 bit modules.
"Aaron Allen" <know-spam@not_here.dude> wrote in message
news:46456d53$1@linux...
> 442?
> 20 bits on the analogs, 24 on the SpDif was the spec I believe.
>
> AA
>
> "Jeff Hoover" <jkhoover@excite.com> wrote in message
> news:46455183@linux...
>> Tom
>>
>> Like ROd and others I'm going digital to a DAC1, but me it's off the
>> S/PDIF on the 442. How many bits is that thing?
>>
>> I just like having all my 24 bit inputs off the master card for
>> recording, and I'm too lazy to move things around after I record. I
>> think either way will work. I cannot stress enough the importance of
>> GREAT SYNC in this situation. I wrestled waaaaaay too many hours before
>> I finally put in word clock cables all the same length and of good
>> quality. Once I got them all the same hooked to the Lucid GenX,
>> everything has been smooth sailing (except for the occasional experience
>> of Auto tune starting up at the wrong sample rate. I really though I
>> stunk as a singer until I looked up and saw it running a 48 on a 44.1
>> project!).
>>
>>
>> JH
>>
>>
>>> Jeff,
>>> I did that a couple of weeks ago too and it stabilized Paris for sure.
>>> I get crashes booting up Paris still for other reasons but once it's up
>>> and running it is more stable on the Root C: . Thank you Dimitrios.
>>> Those other changes D. suggested are still in the making for me.
>>> Big stuff there!
>>> I'd rather have a MEC on the A card for the 24 bit SPDIF. Are you
>>> just monitoring 20 bit?
>>> Tom
>>> "Jeff Hoover" <jkhoover@excite.com <mailto:jkhoover@excite.com>>
>>> wrote in message news:46452c27@linux...
>>> Tom,
>>>
>>> Running a 4 card system:
>>>
>>> A 442
>>> B 442
>>> C Nada
>>> D Mec with 2 modules
>>>
>>> Just cleaned up and reinstalled Paris directly off the root
>>> (C:]ParisPro) a week and a half ago. Ben rock solid on 5 sessions
>>> do
>>> far.
>>>
>>> JH
>>>
>>> Bruhl wrote:
>>> > Hey Rod,
>>> > That sounds promising. What cards do you have the
>>> > Mecs and 442 connected to?
>>> > Tom
>>> > > >
>>> > "Rod Lincoln" <rlincoln@nospam.kc.rr.com
>>> <mailto:rlincoln@nospam.kc.rr.com>
>>> > <mailto:rlincoln@nospam.kc.rr.com>> wrote in message
>>> > news:46451438$1@linux...
>>> >
>>> > I've got 2 mecs and a 442 working here, no problems at all.
>>> > I'm also clocking with the old Lucid genX word clock. 5
>>> modules in
>>> > one mec,
>>> > 4 modules in the other. 1 adat card each. 6 eds cards, 3 UAD
>>> cards,
>>> > all in
>>> > a magma. Oh yeah, a Lynx one in the computer also.
>>> > Rod
>>> > "Tom Bruhl" <arpegio@comcast.net <mailto:arpegio@comcast.net>
>>> <mailto:arpegio@comcast.net>> wrote:
>>> > >
>>> > >
>>> > >I'll be buying either two MECs or two 442s but don't want
>>> it
>>> > >to mess my whole rig up if the 442s don't play nice.
>>> > >I am using an older Lucid clock now with 2 Mecs already.
>>> > >They each have five modules in them. The others may
>>> > >see a single ADAT at most someday maybe.
>>> > >
>>> > >I can make the MECs fit in the machine room with the others
>>> > >but the 442s would be a lot easier.
>>> > >
>>> > >Anyone know Deej?
>>> > >
>>> > >Also I have to find the pin config for a 56 pin EDAC/ELCO
>>> ADAT
>>> > >connector. I want to chop this bad boy off and solder 16
>>> TRS
>>> > >to it. Anyone know whether the ADAT wiring is different
>>> than
>>> > >standard?
>>> > >Thanks,
>>> > >Tom
>>> > >
>>> > >
>>> > >
>>> > >
>>> > >I choose Polesoft Lockspam to fight spam, and you?
>>> > >http://www.polesoft.com/refer.html > >
>>> > ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
>>> Transitional//EN">
>>> > ><HTML><HEAD>
>>> > ><META http-equiv=3DContent-Type content=3D"text/html; =
>>> > >charset=3Diso-8859-1">
>>> > ><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
>>> > ><STYLE></STYLE>
>>> > ></HEAD>
>>> > ><BODY bgColor=3D#ffffff>
>>> > ><DIV><FONT face=3DArial size=3D2>I'll be buying either two
>>> MECs or
>>> > two =
>>> > >442s but=20
>>> > >don't want it</FONT></DIV>
>>> > ><DIV><FONT face=3DArial size=3D2>to mess my whole rig up if
>>> the 442s =
>>> > >don't play=20
>>> > >nice.</FONT></DIV>
>>> > ><DIV><FONT face=3DArial size=3D2>I am using an older Lucid
>>> clock now =
>>> > >with 2 Mecs=20
>>> > >already.</FONT></DIV>
>>> > ><DIV><FONT face=3DArial size=3D2>They each have five
>>> modules in =
>>> > >them. The=20
>>> > >others may</FONT></DIV>
>>> > ><DIV><FONT face=3DArial size=3D2>see a single ADAT at most
>>> someday=20
>>> > >maybe.</FONT></DIV>
>>> > ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>>> > ><DIV><FONT face=3DArial size=3D2>I can make the MECs fit in
>>> the
>>> > machine
>>> > =
>>> > >room with=20
>>> > >the others</FONT></DIV>
>>> > ><DIV><FONT face=3DArial size=3D2>but the 442s would be
>>> </FONT><FONT =
>>> > >face=3DArial=20
>>> > >size=3D2>a lot easier.</FONT></DIV>
>>> > ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>>> > ><DIV><FONT face=3DArial size=3D2>Anyone know
>>> Deej?</FONT></DIV>
>>> > ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>>> > ><DIV><FONT face=3DArial size=3D2>Also I have to find the
>>> pin
>>> > config for
>>> > =
>>> > >a 56 pin=20
>>> > >EDAC/ELCO ADAT</FONT></DIV>
>>> > ><DIV><FONT face=3DArial size=3D2>connector. I want to chop
>>> this =
>>> > >bad boy off=20
>>> > >and solder 16 TRS</FONT></DIV>
>>> > ><DIV><FONT face=3DArial size=3D2>to it. Anyone know whether
>>> the =
>>> > >ADAT wiring is=20
>>> > >different than</FONT></DIV>
>>> > ><DIV><FONT face=3DArial size=3D2>standard?</FONT></DIV>
>>> > ><DIV><FONT face=3DArial size=3D2>Thanks,</FONT></DIV>
>>> > ><DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
>>> > ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>>> > ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>>> > ><DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to
>>> fight
>>> > spam, =
>>> > >and=20
>>> > >you?<BR><A=20
>>> >
>>> >href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer
>>> <http://www.polesoft.com/refer.html">http://www.polesoft.com/refer>
>>> >
>>> <http://www.polesoft.com/refer.html">http://www.polesoft.com/refer
>>>
>>> <http://www.polesoft.com/refer.html">http://www.polesoft.com/refer>>=
>>> > >.html</A> </FONT></DIV></BODY></HTML>
>>> > >
>>> > >
>
>
|
|
|
|
| Re: Paris 3.0/XP MECs and 442s work nicely or no? Also Elco pin out. . . [message #84389 is a reply to message #84386] |
Sat, 12 May 2007 00:32 |
Tom Bruhl
Messages: 1368
Registered: June 2007
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_0107_01C79446.22F5BCA0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Aaron,
Well if that's true that's great! That's the same as a MEC. I've read
differently though. I hope I'm wrong.
Anyone else that knows for sure please chime in.
Tom =20
"Aaron Allen" <know-spam@not_here.dude> wrote in message =
news:46456d53$1@linux...
442?
20 bits on the analogs, 24 on the SpDif was the spec I believe.
AA
"Jeff Hoover" <jkhoover@excite.com> wrote in message =
news:46455183@linux...
> Tom
>
> Like ROd and others I'm going digital to a DAC1, but me it's off the =
> S/PDIF on the 442. How many bits is that thing?
>
> I just like having all my 24 bit inputs off the master card for =
recording,=20
> and I'm too lazy to move things around after I record. I think =
either way=20
> will work. I cannot stress enough the importance of GREAT SYNC in =
this=20
> situation. I wrestled waaaaaay too many hours before I finally put =
in=20
> word clock cables all the same length and of good quality. Once I =
got=20
> them all the same hooked to the Lucid GenX, everything has been =
smooth=20
> sailing (except for the occasional experience of Auto tune starting =
up at=20
> the wrong sample rate. I really though I stunk as a singer until I =
looked=20
> up and saw it running a 48 on a 44.1 project!).
>
>
> JH
>
>
>> Jeff,
>> I did that a couple of weeks ago too and it stabilized Paris for =
sure.
>> I get crashes booting up Paris still for other reasons but once =
it's up=20
>> and running it is more stable on the Root C: . Thank you =
Dimitrios.
>> Those other changes D. suggested are still in the making for me.
>> Big stuff there!
>> I'd rather have a MEC on the A card for the 24 bit SPDIF. Are you
>> just monitoring 20 bit?
>> Tom
>> "Jeff Hoover" <jkhoover@excite.com <mailto:jkhoover@excite.com>>
>> wrote in message news:46452c27@linux...
>> Tom,
>>
>> Running a 4 card system:
>>
>> A 442
>> B 442
>> C Nada
>> D Mec with 2 modules
>>
>> Just cleaned up and reinstalled Paris directly off the root
>> (C:]ParisPro) a week and a half ago. Ben rock solid on 5 =
sessions do
>> far.
>>
>> JH
>>
>> Bruhl wrote:
>> > Hey Rod,
>> > That sounds promising. What cards do you have the
>> > Mecs and 442 connected to?
>> > Tom
>> > > >
>> > "Rod Lincoln" <rlincoln@nospam.kc.rr.com
>> <mailto:rlincoln@nospam.kc.rr.com>
>> > <mailto:rlincoln@nospam.kc.rr.com>> wrote in message
>> > news:46451438$1@linux...
>> >
>> > I've got 2 mecs and a 442 working here, no problems at =
all.
>> > I'm also clocking with the old Lucid genX word clock. 5
>> modules in
>> > one mec,
>> > 4 modules in the other. 1 adat card each. 6 eds cards, 3 =
UAD
>> cards,
>> > all in
>> > a magma. Oh yeah, a Lynx one in the computer also.
>> > Rod
>> > "Tom Bruhl" <arpegio@comcast.net =
<mailto:arpegio@comcast.net>
>> <mailto:arpegio@comcast.net>> wrote:
>> > >
>> > >
>> > >I'll be buying either two MECs or two 442s but don't =
want it
>> > >to mess my whole rig up if the 442s don't play nice.
>> > >I am using an older Lucid clock now with 2 Mecs =
already.
>> > >They each have five modules in them. The others may
>> > >see a single ADAT at most someday maybe.
>> > >
>> > >I can make the MECs fit in the machine room with the =
others
>> > >but the 442s would be a lot easier.
>> > >
>> > >Anyone know Deej?
>> > >
>> > >Also I have to find the pin config for a 56 pin =
EDAC/ELCO=20
>> ADAT
>> > >connector. I want to chop this bad boy off and solder =
16=20
>> TRS
>> > >to it. Anyone know whether the ADAT wiring is =
different=20
>> than
>> > >standard?
>> > >Thanks,
>> > >Tom
>> > >
>> > >
>> > >
>> > >
>> > >I choose Polesoft Lockspam to fight spam, and you?
>> > >http://www.polesoft.com/refer.html > >
>> > ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0=20
>> Transitional//EN">
>> > ><HTML><HEAD>
>> > ><META http-equiv=3D3DContent-Type =
content=3D3D"text/html; =3D
>> > >charset=3D3Diso-8859-1">
>> > ><META content=3D3D"MSHTML 6.00.2800.1400" =
name=3D3DGENERATOR>
>> > ><STYLE></STYLE>
>> > ></HEAD>
>> > ><BODY bgColor=3D3D#ffffff>
>> > ><DIV><FONT face=3D3DArial size=3D3D2>I'll be buying =
either two
>> MECs or
>> > two =3D
>> > >442s but=3D20
>> > >don't want it</FONT></DIV>
>> > ><DIV><FONT face=3D3DArial size=3D3D2>to mess my whole =
rig up if
>> the 442s =3D
>> > >don't play=3D20
>> > >nice.</FONT></DIV>
>> > ><DIV><FONT face=3D3DArial size=3D3D2>I am using an =
older Lucid
>> clock now =3D
>> > >with 2 Mecs=3D20
>> > >already.</FONT></DIV>
>> > ><DIV><FONT face=3D3DArial size=3D3D2>They each have =
five
>> modules in =3D
>> > >them. The=3D20
>> > >others may</FONT></DIV>
>> > ><DIV><FONT face=3D3DArial size=3D3D2>see a single ADAT =
at most
>> someday=3D20
>> > >maybe.</FONT></DIV>
>> > ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
>> > ><DIV><FONT face=3D3DArial size=3D3D2>I can make the =
MECs fit in=20
>> the
>> > machine
>> > =3D
>> > >room with=3D20
>> > >the others</FONT></DIV>
>> > ><DIV><FONT face=3D3DArial size=3D3D2>but the 442s =
would be
>> </FONT><FONT =3D
>> > >face=3D3DArial=3D20
>> > >size=3D3D2>a lot easier.</FONT></DIV>
>> > ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
>> > ><DIV><FONT face=3D3DArial size=3D3D2>Anyone know=20
>> Deej?</FONT></DIV>
>> > ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
>> > ><DIV><FONT face=3D3DArial size=3D3D2>Also I have to =
find the pin
>> > config for
>> > =3D
>> > >a 56 pin=3D20
>> > >EDAC/ELCO ADAT</FONT></DIV>
>> > ><DIV><FONT face=3D3DArial size=3D3D2>connector. I want =
to chop
>> this =3D
>> > >bad boy off=3D20
>> > >and solder 16 TRS</FONT></DIV>
>> > ><DIV><FONT face=3D3DArial size=3D3D2>to it. Anyone =
know whether
>> the =3D
>> > >ADAT wiring is=3D20
>> > >different than</FONT></DIV>
>> > ><DIV><FONT face=3D3DArial =
size=3D3D2>standard?</FONT></DIV>
>> > ><DIV><FONT face=3D3DArial =
size=3D3D2>Thanks,</FONT></DIV>
>> > ><DIV><FONT face=3D3DArial size=3D3D2>Tom</FONT></DIV>
>> > ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
>> > ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
>> > ><DIV><FONT size=3D3D2><BR><BR>I choose Polesoft =
Lockspam to=20
>> fight
>> > spam, =3D
>> > >and=3D20
>> > >you?<BR><A=3D20
>> >=20
>> =
>href=3D3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/re=
fer
>> =
<http://www.polesoft.com/refer.html">http://www.polesoft.com/refer>
>> >=20
>> <http://www.polesoft.com/refer.html">http://www.polesoft.com/refer
>> =
<http://www.polesoft.com/refer.html">http://www.polesoft.com/refer>>=3D
>> > >.html</A> </FONT></DIV></BODY></HTML>
>> > >
>> > >=20
------=_NextPart_000_0107_01C79446.22F5BCA0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Aaron,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Well if that's true that's great! =
That's the=20
same as a MEC. I've read</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>differently though. I hope =
I'm=20
wrong.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Anyone else that knows for sure please =
chime=20
in.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Tom </FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Aaron Allen" <<A=20
=
href=3D"mailto:know-spam@not_here.dude">know-spam@not_here.dude</A>> =
wrote in=20
message <A=20
=
href=3D"news:46456d53$1@linux">news:46456d53$1@linux</A>...</DIV>442?<BR>=
20 bits=20
on the analogs, 24 on the SpDif was the spec I =
believe.<BR><BR>AA<BR><BR>"Jeff=20
Hoover" <<A =
href=3D"mailto:jkhoover@excite.com">jkhoover@excite.com</A>>=20
wrote in message <A=20
href=3D"news:46455183@linux">news:46455183@linux</A>...<BR>>=20
Tom<BR>><BR>> Like ROd and others I'm going digital to a DAC1, =
but me=20
it's off the <BR>> S/PDIF on the 442. How many bits is that=20
thing?<BR>><BR>> I just like having all my 24 bit inputs off the =
master=20
card for recording, <BR>> and I'm too lazy to move things around =
after I=20
record. I think either way <BR>> will work. I cannot =
stress=20
enough the importance of GREAT SYNC in this <BR>> situation. =
I=20
wrestled waaaaaay too many hours before I finally put in <BR>> word =
clock=20
cables all the same length and of good quality. Once I got =
<BR>> them=20
all the same hooked to the Lucid GenX, everything has been smooth =
<BR>>=20
sailing (except for the occasional experience of Auto tune starting up =
at=20
<BR>> the wrong sample rate. I really though I stunk as a =
singer=20
until I looked <BR>> up and saw it running a 48 on a 44.1=20
project!).<BR>><BR>><BR>> JH<BR>><BR>><BR>>>=20
Jeff,<BR>>> I did that a couple of weeks ago too and it =
stabilized Paris=20
for sure.<BR>>> I get crashes booting up Paris still for other =
reasons=20
but once it's up <BR>>> and running it is more stable on the =
Root C:=20
. Thank you Dimitrios.<BR>>> Those other changes D. =
suggested are=20
still in the making for me.<BR>>> Big stuff =
there!<BR>>> I'd=20
rather have a MEC on the A card for the 24 bit SPDIF. Are=20
you<BR>>> just monitoring 20 bit?<BR>>> =
Tom<BR>>> =20
"Jeff Hoover" <<A =
href=3D"mailto:jkhoover@excite.com">jkhoover@excite.com</A>=20
<<A=20
=
href=3D"mailto:jkhoover@excite.com">mailto:jkhoover@excite.com</A>>>=
;<BR>>> =20
wrote in message <A=20
=
href=3D"news:46452c27@linux">news:46452c27@linux</A>...<BR>>> =
=20
Tom,<BR>>><BR>>> Running a 4 card=20
system:<BR>>><BR>>> A=20
442<BR>>> B=20
442<BR>>> C=20
Nada<BR>>> D Mec with 2=20
modules<BR>>><BR>>> Just cleaned =
up and=20
reinstalled Paris directly off the =
root<BR>>> =20
(C:]ParisPro) a week and a half ago. Ben rock solid on 5 =
sessions=20
do<BR>>> =20
far.<BR>>><BR>>> =20
JH<BR>>><BR>>> Bruhl=20
wrote:<BR> >> & ;nbsp; > Hey=20
Rod,<BR> >> & ;nbsp; > That sounds=20
promising. What cards do you have=20
the<BR> >> & ;nbsp; > Mecs and 442 =
connected=20
to?<BR> >> & ;nbsp; >=20
Tom<BR> >> & ;nbsp; > >=20
><BR> >> & ;nbsp; =
> =20
"Rod Lincoln" <<A=20
=
href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A><B=
R>>> =20
<<A=20
=
href=3D"mailto:rlincoln@nospam.kc.rr.com">mailto:rlincoln@nospam.kc.rr.co=
m</A>><BR> >> & ;nbsp;=20
> <<A=20
=
href=3D"mailto:rlincoln@nospam.kc.rr.com">mailto:rlincoln@nospam.kc.rr.co=
m</A>>>=20
wrote in message<BR> >> & ;nbsp;=20
> <A=20
=
href=3D"news:46451438$1@linux">news:46451438$1@linux</A>...<BR>>>&n=
bsp; =20
><BR> >> & ;nbsp; =
> =20
I've got 2 mecs and a 442 working here, no problems at=20
all.<BR> >> & ;nbsp; =
> =20
I'm also clocking with the old Lucid genX word clock.=20
5<BR>>> modules=20
in<BR> >> & ;nbsp; =
> one=20
mec,<BR> >> & ;nbsp; =
> 4=20
modules in the other. 1 adat card each. 6 eds cards, 3=20
UAD<BR>>> =20
cards,<BR> >> & ;nbsp; =
> =20
all in<BR> >> & ;nbsp; =
> =20
a magma. Oh yeah, a Lynx one in the computer=20
also.<BR> >> & ;nbsp; =
> =20
Rod<BR> >> & ;nbsp; =
> =20
"Tom Bruhl" <<A =
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>=20
<<A=20
=
href=3D"mailto:arpegio@comcast.net">mailto:arpegio@comcast.net</A>><BR=
>>> =20
<<A=20
=
href=3D"mailto:arpegio@comcast.net">mailto:arpegio@comcast.net</A>>>=
;=20
wrote:<BR> >> & ;nbsp;=20
> =2 0
><BR> >> & ;nbsp;=20
> =2 0
><BR> >> & ;nbsp;=20
> >I'll be buying either two MECs =
or two=20
442s but don't want it<BR> >> & ;nbsp;=20
> >to mess my whole rig up if the =
442s=20
don't play nice.<BR> >> & ;nbsp;=20
> >I am using an older Lucid clock =
now=20
with 2 Mecs already.<BR> >> & ;nbsp;=20
> >They each have five modules in=20
them. The others may<BR> >> & ;nbsp;=20
> >see a single ADAT at most =
someday=20
maybe.<BR> >> & ;nbsp;=20
> =2 0
><BR> >> & ;nbsp;=20
> >I can make the MECs fit in the =
machine=20
room with the others<BR> >> & ;nbsp;=20
> >but the 442s would be a lot=20
easier.<BR> >> & ;nbsp;=20
> =2 0
><BR> >> & ;nbsp;=20
> >Anyone know=20
Deej?<BR> >> & ;nbsp;=20
> =2 0
><BR> >> & ;nbsp;=20
> >Also I have to find the pin =
config for=20
a 56 pin EDAC/ELCO <BR>>> =
ADAT<BR> >> & ;nbsp;=20
> >connector. I want to chop =
this=20
bad boy off and solder 16 <BR>>>=20
TRS<BR> >> & ;nbsp;=20
> >to it. Anyone know =
whether the=20
ADAT wiring is different <BR>>>=20
than<BR> >> & ;nbsp;=20
> =2 0
>standard?<BR> >> & ;nbsp;=20
> =2 0
>Thanks,<BR> >> & ;nbsp;=20
> =2 0
>Tom<BR> >> & ;nbsp;=20
> =2 0
><BR> >> & ;nbsp;=20
> =2 0
><BR> >> & ;nbsp;=20
> =2 0
><BR> >> & ;nbsp;=20
> =2 0
><BR> >> & ;nbsp;=20
> >I choose Polesoft Lockspam to =
fight=20
spam, and you?<BR> >> & ;nbsp;=20
> =
>http://www.polesoft.com/refer.html=20
> =2 0
><BR> >> & ;nbsp;=20
> ><!DOCTYPE HTML PUBLIC =
"-//W3C//DTD=20
HTML 4.0 <BR>>>=20
Transitional//EN"><BR> >> & ;nbsp;=20
> =2 0
><HTML><HEAD><BR> >> & ;nbsp; =
> ><META =
http-equiv=3D3DContent-Type=20
content=3D3D"text/html; =3D<BR> >> & ;nbsp;=20
> =2 0
=
>charset=3D3Diso-8859-1"><BR> >> & ;nbsp;=
=20
> ><META content=3D3D"MSHTML=20
6.00.2800.1400" =
name=3D3DGENERATOR><BR> >> & ;nbsp;=20
> =2 0
=
><STYLE></STYLE><BR> >> & ;nbsp;=
=20
> =2 0
></HEAD><BR> >> & ;nbsp;=20
> ><BODY=20
bgColor=3D3D#ffffff><BR> >> & ;nbsp;=20
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2>I'll be buying either =
two<BR>>> MECs=20
or<BR> >> & ;nbsp; =
> two=20
=3D<BR> >> & ;nbsp; =
> =2 0
>442s but=3D20<BR> >> & ;nbsp;=20
> >don't want=20
it</FONT></DIV><BR> >> & ;nbsp;=20
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2>to mess my whole rig up =
if<BR>>> the=20
442s =3D<BR> >> & ;nbsp;=20
> >don't=20
play=3D20<BR> >> & ;nbsp;=20
> =2 0
=
>nice.</FONT></DIV><BR> >> & ;nb=
sp;=20
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2>I am using an older =
Lucid<BR>>> =20
clock now =3D<BR> >> & ;nbsp;=20
> >with 2=20
Mecs=3D20<BR> >> & ;nbsp;=20
> =2 0
=
>already.</FONT></DIV><BR >>> =
=20
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2>They each have five<BR>>> =
modules in=20
=3D<BR> >> & ;nbsp; =
> =2 0
>them. The=3D20<BR> >> & ;nbsp;=20
> >others=20
may</FONT></DIV><BR> >> & ;nbsp; =
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2>see a single ADAT at =
most<BR>>> =20
someday=3D20<BR> >> & ;nbsp;=20
> =2 0
=
>maybe.</FONT></DIV><BR> >> & ;n=
bsp;=20
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2></FONT>=20
</DIV><BR> >> & ;nbsp;=20
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2>I can make the MECs fit in <BR>>>=20
the<BR> >> & ;nbsp; =
> =20
machine<BR> >> & ;nbsp; =
> =20
=3D<BR> >> & ;nbsp; =
> =2 0
>room with=3D20<BR> >> & ;nbsp;=20
> >the=20
=
others</FONT></DIV><BR> >> & ;nbsp;=
=20
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2>but the 442s would =
be<BR>>> =20
</FONT><FONT =3D<BR> >> & ;nbsp;=20
> =2 0
>face=3D3DArial=3D20<BR> >> & ;nbsp;=20
> >size=3D3D2>a lot=20
=
easier.</FONT></DIV><BR> >> & ;nbsp=
;=20
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2></FONT>=20
</DIV><BR> >> & ;nbsp;=20
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2>Anyone know <BR>>>=20
=
Deej?</FONT></DIV><BR> >> & ;nbsp; =
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2></FONT>=20
</DIV><BR> >> & ;nbsp;=20
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2>Also I have to find the=20
pin<BR> >> & ;nbsp; =
> =20
config for<BR> >> & ;nbsp;=20
> =
=3D<BR> >> & ;nbsp;=20
> >a 56=20
pin=3D20<BR> >> & ;nbsp;=20
> >EDAC/ELCO=20
=
ADAT</FONT></DIV><BR> >> & ;nbsp;=20
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2>connector. I want to =
chop<BR>>> this=20
=3D<BR> >> & ;nbsp; =
> =2 0
>bad boy off=3D20<BR> >> & ;nbsp;=20
> >and solder 16=20
TRS</FONT></DIV><BR> >> & ;nbsp; =
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2>to it. Anyone know =
whether<BR>>> the=20
=3D<BR> >> & ;nbsp; =
> =2 0
>ADAT wiring is=3D20<BR> >> & ;nbsp;=20
> >different=20
=
than</FONT></DIV><BR> >> & ;nbsp;=20
> ><DIV><FONT =
face=3D3DArial=20
=
size=3D3D2>standard?</FONT></DIV > <BR>>> &=
nbsp; =20
> ><DIV><FONT =
face=3D3DArial=20
=
size=3D3D2>Thanks,</FONT></DIV&a mp;gt; <BR>>> &nb=
sp; =20
> ><DIV><FONT =
face=3D3DArial=20
=
size=3D3D2>Tom</FONT></DIV&g t; <BR>>> &=
nbsp; =20
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2></FONT>=20
</DIV><BR> >> & ;nbsp;=20
> ><DIV><FONT =
face=3D3DArial=20
size=3D3D2></FONT>=20
</DIV><BR> >> & ;nbsp;=20
> ><DIV><FONT=20
size=3D3D2><BR><BR>I choose Polesoft Lockspam to =
<BR>>>=20
fight<BR> >> & ;nbsp; =
> =20
spam, =3D<BR> >> & ;nbsp;=20
> =2 0
>and=3D20<BR> >> & ;nbsp;=20
> =2 0
>you?<BR><A=3D20<BR> >> & ;nbsp; =
>=20
<BR>>> >href=3D3D"<A=20
=
href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
'>http://www.polesoft.com/refer.html">http://www.polesoft.com/refer</A=
><BR>>> =20
<<A=20
=
href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
'>http://www.polesoft.com/refer.html">http://www.polesoft.com/refer</A=
>><BR> >> & ;nbsp;=20
> <BR>>> <<A=20
=
href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
'>http://www.polesoft.com/refer.html">http://www.polesoft.com/refer</A=
><BR>>> =20
<<A=20
=
href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
'>http://www.polesoft.com/refer.html">http://www.polesoft.com/refer</A=
>>>=3D<BR> >> & ;nbsp;=20
> >.html</A>=20
=
</FONT></DIV></BODY&g t;</HTML> <BR>>> &nbs=
p; =20
> =2 0
><BR> >> & ;nbsp;=20
> > =
<BR><BR></BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_0107_01C79446.22F5BCA0--
|
|
|
|
| Re: Paris 3.0/XP MECs and 442s work nicely or no? Also Elco pin out. . . [message #84397 is a reply to message #84389] |
Sat, 12 May 2007 08:32 |
Dimitrios
Messages: 1056
Registered: August 2005
|
Senior Member |
|
|
OK,
442 has 20 bit spdif and MEC has 24 bit spdif ...
Hope this helps.
Dimitrios
"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>Aaron,
>Well if that's true that's great! That's the same as a MEC. I've read
>differently though. I hope I'm wrong.
>
>Anyone else that knows for sure please chime in.
>
>Tom =20
>
>
> "Aaron Allen" <know-spam@not_here.dude> wrote in message =
>news:46456d53$1@linux...
> 442?
> 20 bits on the analogs, 24 on the SpDif was the spec I believe.
>
> AA
>
> "Jeff Hoover" <jkhoover@excite.com> wrote in message =
>news:46455183@linux...
> > Tom
> >
> > Like ROd and others I'm going digital to a DAC1, but me it's off the
=
>
> > S/PDIF on the 442. How many bits is that thing?
> >
> > I just like having all my 24 bit inputs off the master card for =
>recording,=20
> > and I'm too lazy to move things around after I record. I think =
>either way=20
> > will work. I cannot stress enough the importance of GREAT SYNC in =
>this=20
> > situation. I wrestled waaaaaay too many hours before I finally put
=
>in=20
> > word clock cables all the same length and of good quality. Once I =
>got=20
> > them all the same hooked to the Lucid GenX, everything has been =
>smooth=20
> > sailing (except for the occasional experience of Auto tune starting
=
>up at=20
> > the wrong sample rate. I really though I stunk as a singer until I
=
>looked=20
> > up and saw it running a 48 on a 44.1 project!).
> >
> >
> > JH
> >
> >
> >> Jeff,
> >> I did that a couple of weeks ago too and it stabilized Paris for =
>sure.
> >> I get crashes booting up Paris still for other reasons but once =
>it's up=20
> >> and running it is more stable on the Root C: . Thank you =
>Dimitrios.
> >> Those other changes D. suggested are still in the making for me.
> >> Big stuff there!
> >> I'd rather have a MEC on the A card for the 24 bit SPDIF. Are you
> >> just monitoring 20 bit?
> >> Tom
> >> "Jeff Hoover" <jkhoover@excite.com <mailto:jkhoover@excite.com>>
> >> wrote in message news:46452c27@linux...
> >> Tom,
> >>
> >> Running a 4 card system:
> >>
> >> A 442
> >> B 442
> >> C Nada
> >> D Mec with 2 modules
> >>
> >> Just cleaned up and reinstalled Paris directly off the root
> >> (C:]ParisPro) a week and a half ago. Ben rock solid on 5 =
>sessions do
> >> far.
> >>
> >> JH
> >>
> >> Bruhl wrote:
> >> > Hey Rod,
> >> > That sounds promising. What cards do you have the
> >> > Mecs and 442 connected to?
> >> > Tom
> >> > > >
> >> > "Rod Lincoln" <rlincoln@nospam.kc.rr.com
> >> <mailto:rlincoln@nospam.kc.rr.com>
> >> > <mailto:rlincoln@nospam.kc.rr.com>> wrote in message
> >> > news:46451438$1@linux...
> >> >
> >> > I've got 2 mecs and a 442 working here, no problems at =
>all.
> >> > I'm also clocking with the old Lucid genX word clock. 5
> >> modules in
> >> > one mec,
> >> > 4 modules in the other. 1 adat card each. 6 eds cards, 3
=
>UAD
> >> cards,
> >> > all in
> >> > a magma. Oh yeah, a Lynx one in the computer also.
> >> > Rod
> >> > "Tom Bruhl" <arpegio@comcast.net =
><mailto:arpegio@comcast.net>
> >> <mailto:arpegio@comcast.net>> wrote:
> >> > >
> >> > >
> >> > >I'll be buying either two MECs or two 442s but don't =
>want it
> >> > >to mess my whole rig up if the 442s don't play nice.
> >> > >I am using an older Lucid clock now with 2 Mecs =
>already.
> >> > >They each have five modules in them. The others may
> >> > >see a single ADAT at most someday maybe.
> >> > >
> >> > >I can make the MECs fit in the machine room with the =
>others
> >> > >but the 442s would be a lot easier.
> >> > >
> >> > >Anyone know Deej?
> >> > >
> >> > >Also I have to find the pin config for a 56 pin =
>EDAC/ELCO=20
> >> ADAT
> >> > >connector. I want to chop this bad boy off and solder
=
>16=20
> >> TRS
> >> > >to it. Anyone know whether the ADAT wiring is =
>different=20
> >> than
> >> > >standard?
> >> > >Thanks,
> >> > >Tom
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >I choose Polesoft Lockspam to fight spam, and you?
> >> > >http://www.polesoft.com/refer.html > >
> >> > ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0=20
> >> Transitional//EN">
> >> > ><HTML><HEAD>
> >> > ><META http-equiv=3D3DContent-Type =
>content=3D3D"text/html; =3D
> >> > >charset=3D3Diso-8859-1">
> >> > ><META content=3D3D"MSHTML 6.00.2800.1400" =
>name=3D3DGENERATOR>
> >> > ><STYLE></STYLE>
> >> > ></HEAD>
> >> > ><BODY bgColor=3D3D#ffffff>
> >> > ><DIV><FONT face=3D3DArial size=3D3D2>I'll be buying =
>either two
> >> MECs or
> >> > two =3D
> >> > >442s but=3D20
> >> > >don't want it</FONT></DIV>
> >> > ><DIV><FONT face=3D3DArial size=3D3D2>to mess my whole
=
>rig up if
> >> the 442s =3D
> >> > >don't play=3D20
> >> > >nice.</FONT></DIV>
> >> > ><DIV><FONT face=3D3DArial size=3D3D2>I am using an =
>older Lucid
> >> clock now =3D
> >> > >with 2 Mecs=3D20
> >> > >already.</FONT></DIV>
> >> > ><DIV><FONT face=3D3DArial size=3D3D2>They each have =
>five
> >> modules in =3D
> >> > >them. The=3D20
> >> > >others may</FONT></DIV>
> >> > ><DIV><FONT face=3D3DArial size=3D3D2>see a single ADAT
=
>at most
> >> someday=3D20
> >> > >maybe.</FONT></DIV>
> >> > ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> >> > ><DIV><FONT face=3D3DArial size=3D3D2>I can make the =
>MECs fit in=20
> >> the
> >> > machine
> >> > =3D
> >> > >room with=3D20
> >> > >the others</FONT></DIV>
> >> > ><DIV><FONT face=3D3DArial size=3D3D2>but the 442s =
>would be
> >> </FONT><FONT =3D
> >> > >face=3D3DArial=3D20
> >> > >size=3D3D2>a lot easier.</FONT></DIV>
> >> > ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> >> > ><DIV><FONT face=3D3DArial size=3D3D2>Anyone know=20
> >> Deej?</FONT></DIV>
> >> > ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> >> > ><DIV><FONT face=3D3DArial size=3D3D2>Also I have to =
>find the pin
> >> > config for
> >> > =3D
> >> > >a 56 pin=3D20
> >> > >EDAC/ELCO ADAT</FONT></DIV>
> >> > ><DIV><FONT face=3D3DArial size=3D3D2>connector. I want
=
>to chop
> >> this =3D
> >> > >bad boy off=3D20
> >> > >and solder 16 TRS</FONT></DIV>
> >> > ><DIV><FONT face=3D3DArial size=3D3D2>to it. Anyone =
>know whether
> >> the =3D
> >> > >ADAT wiring is=3D20
> >> > >different than</FONT></DIV>
> >> > ><DIV><FONT face=3D3DArial =
>size=3D3D2>standard?</FONT></DIV>
> >> > ><DIV><FONT face=3D3DArial =
>size=3D3D2>Thanks,</FONT></DIV>
> >> > ><DIV><FONT face=3D3DArial size=3D3D2>Tom</FONT></DIV>
> >> > ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> >> > ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> >> > ><DIV><FONT size=3D3D2><BR><BR>I choose Polesoft =
>Lockspam to=20
> >> fight
> >> > spam, =3D
> >> > >and=3D20
> >> > >you?<BR><A=3D20
> >> >=20
> >> =
>>href=3D3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/re=
>fer
> >> =
><http://www.polesoft.com/refer.html">http://www.polesoft.com/refer>
> >> >=20
> >> <http://www.polesoft.com/refer.html">http://www.polesoft.com/refer
> >> =
><http://www.polesoft.com/refer.html">http://www.polesoft.com/refer>>=3D
> >> > >.html</A> </FONT></DIV></BODY></HTML>
> >> > >
> >> > >=20
>
>
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3DContent-Type content=3D"text/html; =
>charset=3Diso-8859-1">
><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D#ffffff>
><DIV><FONT face=3DArial size=3D2>Aaron,</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Well if that's true that's great! =
>That's the=20
>same as a MEC. I've read</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>differently though. I hope =
>I'm=20
>wrong.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><DIV><FONT face=3DArial size=3D2>Anyone else that knows for sure please
=
>chime=20
>in.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><DIV><FONT face=3DArial size=3D2>Tom </FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><BLOCKQUOTE=20
>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Aaron Allen" <<A=20
> =
>href=3D"mailto:know-spam@not_here.dude">know-spam@not_here.dude</A>> =
>wrote in=20
> message <A=20
> =
>href=3D"news:46456d53$1@linux">news:46456d53$1@linux</A>...</DIV>442?<BR>=
>20 bits=20
> on the analogs, 24 on the SpDif was the spec I =
>believe.<BR><BR>AA<BR><BR>"Jeff=20
> Hoover" <<A =
>href=3D"mailto:jkhoover@excite.com">jkhoover@excite.com</A>>=20
> wrote in message <A=20
> href=3D"news:46455183@linux">news:46455183@linux</A>...<BR>>=20
> Tom<BR>><BR>> Like ROd and others I'm going digital to a DAC1, =
>but me=20
> it's off the <BR>> S/PDIF on the 442. How many bits is that=20
> thing?<BR>><BR>> I just like having all my 24 bit inputs off the =
>master=20
> card for recording, <BR>> and I'm too lazy to move things around =
>after I=20
> record. I think either way <BR>> will work. I cannot =
>stress=20
> enough the importance of GREAT SYNC in this <BR>> situation. =
>I=20
> wrestled waaaaaay too many hours before I finally put in <BR>> word =
>clock=20
> cables all the same length and of good quality. Once I got =
><BR>> them=20
> all the same hooked to the Lucid GenX, everything has been smooth =
><BR>>=20
> sailing (except for the occasional experience of Auto tune starting up
=
>at=20
> <BR>> the wrong sample rate. I really though I stunk as a =
>singer=20
> until I looked <BR>> up and saw it running a 48 on a 44.1=20
> project!).<BR>><BR>><BR>> JH<BR>><BR>><BR>>>=20
> Jeff,<BR>>> I did that a couple of weeks ago too and it =
>stabilized Paris=20
> for sure.<BR>>> I get crashes booting up Paris still for other =
>reasons=20
> but once it's up <BR>>> and running it is more stable on the =
>Root C:=20
> . Thank you Dimitrios.<BR>>> Those other changes D. =
>suggested are=20
> still in the making for me.<BR>>> Big stuff =
>there!<BR>>> I'd=20
> rather have a MEC on the A card for the 24 bit SPDIF. Are=20
> you<BR>>> just monitoring 20 bit?<BR>>> =
>Tom<BR>>> =20
> "Jeff Hoover" <<A =
>href=3D"mailto:jkhoover@excite.com">jkhoover@excite.com</A>=20
> <<A=20
> =
>href=3D"mailto:jkhoover@excite.com">mailto:jkhoover@excite.com</A>>>=
>;<BR>>> =20
> wrote in message <A=20
> =
>href=3D"news:46452c27@linux">news:46452c27@linux</A>...<BR>>> =
> =20
> Tom,<BR>>><BR>>> Running a 4 card=20
> system:<BR>>><BR>>> A=20
> 442<BR>>> B=20
> 442<BR>>> C=20
> Nada<BR>>> D Mec with 2=20
> modules<BR>>><BR>>> Just cleaned =
>up and=20
> reinstalled Paris directly off the =
>root<BR>>> =20
> (C:]ParisPro) a week and a half ago. Ben rock solid on 5 =
>sessions=20
> do<BR>>> =20
> far.<BR>>><BR>>> =20
> JH<BR>>><BR>>> Bruhl=20
> wrote:<BR>>> > Hey=20
> Rod,<BR>>> > That sounds=20
> promising. What cards do you have=20
> the<BR>>> > Mecs and 442 =
>connected=20
> to?<BR>>> >=20
> Tom<BR>>> > >=20
> ><BR>>> =
>> =20
> "Rod Lincoln" <<A=20
> =
>href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A><B=
>R>>> =20
> <<A=20
> =
>href=3D"mailto:rlincoln@nospam.kc.rr.com">mailto:rlincoln@nospam.kc.rr.co=
>m</A>><BR>>> =20
> > <<A=20
> =
>href=3D"mailto:rlincoln@nospam.kc.rr.com">mailto:rlincoln@nospam.kc.rr.co=
>m</A>>>=20
> wrote in message<BR>>> =20
> > <A=20
> =
>href=3D"news:46451438$1@linux">news:46451438$1@linux</A>...<BR>>>&n=
>bsp; =20
> ><BR>>> =
>> =20
> I've got 2 mecs and a 442 working here, no problems at=20
> all.<BR>>> =
>> =20
> I'm also clocking with the old Lucid genX word clock.=20
> 5<BR>>> modules=20
> in<BR>>> =
>> one=20
> mec,<BR>>> =
>> 4=20
> modules in the other. 1 adat card each. 6 eds cards, 3=20
> UAD<BR>>> =20
> cards,<BR>>> =
>> =20
> all in<BR>>> =
>> =20
> a magma. Oh yeah, a Lynx one in the computer=20
> also.<BR>>> =
>> =20
> Rod<BR>>> =
>> =20
> "Tom Bruhl" <<A =
>href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>=20
> <<A=20
> =
>href=3D"mailto:arpegio@comcast.net">mailto:arpegio@comcast.net</A>><BR=
>>>> =20
> <<A=20
> =
>href=3D"mailto:arpegio@comcast.net">mailto:arpegio@comcast.net</A>>>=
>;=20
> wrote:<BR>>> =20
> > =20
> ><BR>>> =20
> > =20
> ><BR>>> =20
> > >I'll be buying either two MECs =
>or two=20
> 442s but don't want it<BR>>> =20
> > >to mess my whole rig up if the =
>442s=20
> don't play nice.<BR>>> =20
> > >I am using an older Lucid clock =
>now=20
> with 2 Mecs already.<BR>>> =20
> > >They each have five modules in=20
> them. The others may<BR>>> =20
> > >see a single ADAT at most =
>someday=20
> maybe.<BR>>> =20
> > =20
> ><BR>>> =20
> > >I can make the MECs fit in the =
>machine=20
> room with the others<BR>>> =20
> > >but the 442s would be a lot=20
> easier.<BR>>> =20
> > =20
> ><BR>>> =20
> > >Anyone know=20
> Deej?<BR>>> =20
> > =20
> ><BR>>> =20
> > >Also I have to find the pin =
>config for=20
> a 56 pin EDAC/ELCO <BR>>> =
>ADAT<BR>>> =20
> > >connector. I want to chop =
>this=20
> bad boy off and solder 16 <BR>>>=20
> TRS<BR>>> =20
> > >to it. Anyone know =
>whether the=20
> ADAT wiring is different <BR>>>=20
> than<BR>>> =20
> > =20
> >standard?<BR>>> =20
> > =20
> >Thanks,<BR>>> =20
> > =20
> >Tom<BR>>> =20
> > =20
> ><BR>>> =20
> > =20
> ><BR>>> =20
> > =20
> ><BR>>> =20
> > =20
> ><BR>>> =20
> > >I choose Polesoft Lockspam to =
>fight=20
> spam, and you?<BR>>> =20
> > =
>>http://www.polesoft.com/refer.html=20
> > =20
> ><BR>>> =20
> > ><!DOCTYPE HTML PUBLIC =
>"-//W3C//DTD=20
> HTML 4.0 <BR>>>=20
> Transitional//EN"><BR>>> =20
> > =20
> ><HTML><HEAD><BR>>> =
>
> > ><META =
>http-equiv=3D3DContent-Type=20
> content=3D3D"text/html; =3D<BR>>> =20
> > =20
> =
>>charset=3D3Diso-8859-1"><BR>>> =
>=20
> > ><META content=3D3D"MSHTML=20
> 6.00.2800.1400" =
>name=3D3DGENERATOR><BR>>> =20
> > =20
> =
>><STYLE></STYLE><BR>>> =
>=20
> > =20
> ></HEAD><BR>>> =20
> > ><BODY=20
> bgColor=3D3D#ffffff><BR>>> =20
> > ><DIV><FONT =
>face=3D3DArial=20
> size=3D3D2>I'll be buying either =
>two<BR>>> MECs=20
> or<BR>>> =
>> two=20
> =3D<BR>>> =
>> =20
> >442s but=3D20<BR>>> =20
> > >don't want=20
> it</FONT></DIV><BR>>> =20
> > ><DIV><FONT =
>face=3D3DArial=20
> size=3D3D2>to mess my whole rig up =
>if<BR>>> the=20
> 442s =3D<BR>>> =20
> > >don't=20
> play=3D20<BR>>> =20
> > =20
> =
>>nice.</FONT></DIV><BR>>> &nb=
>sp;=20
> > ><DIV><FONT =
>face=3D3DArial=20
> size=3D3D2>I am using an older =
>Lucid<BR>>> =20
> clock now =3D<BR>>> =20
> > >with 2=20
> Mecs=3D20<BR>>> =20
> > =20
> =
>>already.</FONT></DIV><BR>>> =
> =20
> > ><DIV><FONT =
>face=3D3DArial=20
> size=3D3D2>They each have five<BR>>> =
>modules in=20
> =3D<BR>>> =
>> =20
> >them. The=3D20<BR>>> =20
> > >others=20
> may</FONT></DIV><BR>>> =
>
> > ><DIV><FONT =
>face=3D3DArial=20
> size=3D3D2>see a single ADAT at =
>most<BR>>> =20
> someday=3D20<BR>>> =20
> > =20
> =
>>maybe.</FONT></DIV><BR>>> &n=
>bsp;=20
> > ><DIV><FONT =
>face=3D3DArial=20
> size=3D3D2></FONT>=20
> </DIV><BR>>> =20
> > ><DIV><FONT =
>face=3D3DArial=20
> size=3D3D2>I can make the MECs fit in <BR>>>=20
> the<BR>>> =
>> =20
> machine<BR>>> =
>> =20
> =3D<BR>>> =
>> =20
> >room with=3D20<BR>>> =20
> > >the=20
> =
>others</FONT></DIV><BR>>> =
>=20
> > ><DIV><FONT =
>face=3D3DArial=20
> size=3D3D2>but the 442s would =
>be<BR>>> =20
> </FONT><FONT =3D<BR>>> =20
> > =20
> >face=3D3DArial=3D20<BR>>> =20
> > >size=3D3D2>a lot=20
> =
>easier.</FONT></DIV><BR>>> =
>;=20
> > ><DIV><FONT =
>face=3D3DArial=20
> size=3D3D2></FONT>=20
> </DIV><BR>>> =20
> > ><DIV><FONT =
>face=3D3DArial=20
> size=3D3D2>Anyone know <BR>>>=20
> =
>Deej?</FONT></DIV><BR>>> =
>
> > ><DIV><FONT =
>face=3D3DArial=20
> size=3D3D2></FONT>=20
> </DIV><BR>>> =20
> > ><DIV><FONT =
>face=3D3DArial=20
> size=3D3D2>Also I have to find the=20
> pin<BR>>> =
>> =20
> config for<BR>>> =20
> > =
>=3D<BR>>> =20
> > >a 56=20
> pin=3D20<BR>>> =20
> > >EDAC/ELCO=20
> =
>ADAT</FONT></DIV><BR>>> =20
> > ><DIV><FONT =
>face=3D3DArial=20
> size=3D3D2>connector. I want to =
>chop<BR>>> this=20
> =3D<BR>>> =
>> =20
> >bad boy off=3D20<BR>>> =20
> > >and solder 16=20
> TRS</FONT></DIV><BR>>> =
>
> > ><DIV><FONT =
>face=3D3DArial=20
> size=3D3D2>to it. Anyone know =
>whether<BR>>> the=20
> =3D<BR>>> =
>> =20
> >ADAT wiring is=3D20<BR>>> =20
> > >different=20
> =
>than</FONT></DIV><BR>>> =20
> > ><DIV><FONT =
>face=3D3DArial=20
> =
>size=3D3D2>standard?</FONT></DIV><BR>>> &=
>nbsp; =20
> > ><DIV><FONT =
>face=3D3DArial=20
> =
>size=3D3D2>Thanks,</FONT></DIV><BR>>> &nb=
>sp; =20
> > ><DIV><FONT =
>face=3D3DArial=20
> =
>size=3D3D2>Tom</FONT></DIV><BR>>> &=
>nbsp; =20
> > ><DIV><FONT =
>face=3D3DArial=20
> size=3D3D2></FONT>=20
> </DIV><BR>>> =20
> > ><DIV><FONT =
>face=3D3DArial=20
> size=3D3D2></FONT>=20
> </DIV><BR>>> =20
> > ><DIV><FONT=20
> size=3D3D2><BR><BR>I choose Polesoft Lockspam to =
><BR>>>=20
> fight<BR>>> =
>> =20
> spam, =3D<BR>>> =20
> > =20
> >and=3D20<BR>>> =20
> > =20
> >you?<BR><A=3D20<BR>>> =
>>=20
> <BR>>> >href=3D3D"<A=20
> =
>href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
>'>http://www.polesoft.com/refer.html">http://www.polesoft.com/refer</A=
>><BR>>> =20
> <<A=20
> =
>href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
>'>http://www.polesoft.com/refer.html">http://www.polesoft.com/refer</A=
>>><BR>>> =20
> > <BR>>> <<A=20
> =
>href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
>'>http://www.polesoft.com/refer.html">http://www.polesoft.com/refer</A=
>><BR>>> =20
> <<A=20
> =
>href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
>'>http://www.polesoft.com/refer.html">http://www.polesoft.com/refer</A=
>>>>=3D<BR>>> =20
> > >.html</A>=20
> =
></FONT></DIV></BODY></HTML><BR>>> &nbs=
>p; =20
> > =20
> ><BR>>> =20
> > > =
><BR><BR></BLOCKQUOTE></BODY></HTML>
>
>
|
|
|
|
|
|
|
|
|
|
|
|
| Re: Paris 3.0/XP MECs and 442s work nicely or no? Also Elco pin out. . . [message #84409 is a reply to message #84387] |
Sat, 12 May 2007 13:49 |
Rod Lincoln
Messages: 883
Registered: September 2005
|
Senior Member |
|
|
My 442 works reliably off the B card. maybe DJ slapped some sense into it.
;-)
Rod
"DJ" <www.aarrrrggghhh!!!.com> wrote:
>IIRC 442's are initialized differently from the MEC and need to be hung
off
>Card A to work reliablein a multi interface setup. this will necessitate
>using the 20 bit I/O for monitoring the mix.
>
>"Dimitrios" <musurgio@otenet.gr> wrote in message news:46456534$1@linux...
>>
>> Hi Tom,
>> When I tried this 442 and mec combination I only found a working clocked
>> system if 442 was a master so 20 bits versus 24 was inportant to me for
>> monitoring
>> ! (I still record only 16 bits !).
>> What though was evident is that I could NEVER have the ins and outs of
442
>> working correctly.
>> You know sometimes we use 442 along mec and we mostly don't use much of
>> 442
>> except for a spdif or something.
>> It would be nice if someone could CHECK that in a multi mec 442 system
ALL
>> 442's ins and outs along with mec's are working correctly.
>> I know this is much to ask but Tom (and I at least) would love that kind
>> of testing info.
>> A 442 would be a great addition to me IF mec could be main card A and
all
>> ins and outs of everything would work.
>> Is this an XP problem or is it the same as in win98 or Me ?
>> Regards,
>> Dimitrios
>>
>> "Tom Bruhl" <arpegio@comcast.net> wrote:
>>>
>>>
>>>What do you guys think,
>>>What are my chances of getting two 442s in the mix
>>>without my Mecs losing some of their cards?
>>>T.
>>>
>>> "Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message =
>>>news:46453f51$1@linux...
>>>
>>> Mec 1 on card A, 442 on Card B, Mec 2 on Card F (my last card)
>>> I'm running spdif out of Mec 1 to a DAC 1
>>> Rod
>>> "Tom Bruhl" <arpegio@comcast.net> wrote:
>>> >
>>> >
>>> >Hey Rod,
>>> >That sounds promising. What cards do you have the
>>> >Mecs and 442 connected to?
>>> >Tom
>>> >
>>> >
>>> > "Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message =3D
>>> >news:46451438$1@linux...
>>> >
>>> > I've got 2 mecs and a 442 working here, no problems at all.
>>> > I'm also clocking with the old Lucid genX word clock. 5 modules in
>> =
>>>one
>>> =3D
>>> >mec,
>>> > 4 modules in the other. 1 adat card each. 6 eds cards, 3 UAD cards,
>> =
>>>=3D
>>> >all in
>>> > a magma. Oh yeah, a Lynx one in the computer also.
>>> > Rod
>>> > "Tom Bruhl" <arpegio@comcast.net> wrote:
>>> > >
>>> > >
>>> > >I'll be buying either two MECs or two 442s but don't want it
>>> > >to mess my whole rig up if the 442s don't play nice.
>>> > >I am using an older Lucid clock now with 2 Mecs already.
>>> > >They each have five modules in them. The others may
>>> > >see a single ADAT at most someday maybe.
>>> > >
>>> > >I can make the MECs fit in the machine room with the others
>>> > >but the 442s would be a lot easier.
>>> > >
>>> > >Anyone know Deej?
>>> > >
>>> > >Also I have to find the pin config for a 56 pin EDAC/ELCO ADAT
>>> > >connector. I want to chop this bad boy off and solder 16 TRS
>>> > >to it. Anyone know whether the ADAT wiring is different than
>>> > >standard?
>>> > >Thanks,
>>> > >Tom
>>> > >
>>> > >
>>> > >
>>> > >
>>> > >I choose Polesoft Lockspam to fight spam, and you?
>>> > >http://www.polesoft.com/refer.html =3D20
>>> > >
>>> > ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
>>> > ><HTML><HEAD>
>>> > ><META http-equiv=3D3D3DContent-Type content=3D3D3D"text/html; =
>>>=3D3D
>>> > >charset=3D3D3Diso-8859-1">
>>> > ><META content=3D3D3D"MSHTML 6.00.2800.1400" name=3D3D3DGENERATOR>
>>> > ><STYLE></STYLE>
>>> > ></HEAD>
>>> > ><BODY bgColor=3D3D3D#ffffff>
>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>I'll be buying either two
>> =
>>>MECs =3D
>>> >or two =3D3D
>>> > >442s but=3D3D20
>>> > >don't want it</FONT></DIV>
>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>to mess my whole rig up
=
>>>if the =3D
>>> >442s =3D3D
>>> > >don't play=3D3D20
>>> > >nice.</FONT></DIV>
>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>I am using an older Lucid
>> =
>>>clock
>>> =3D
>>> >now =3D3D
>>> > >with 2 Mecs=3D3D20
>>> > >already.</FONT></DIV>
>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>They each have five =
>>>modules in =3D
>>> >=3D3D
>>> > >them. The=3D3D20
>>> > >others may</FONT></DIV>
>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>see a single ADAT at most
>> =
>>>=3D
>>> >someday=3D3D20
>>> > >maybe.</FONT></DIV>
>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>I can make the MECs fit
=
>>>in the =3D
>>> >machine
>>> > =3D3D
>>> > >room with=3D3D20
>>> > >the others</FONT></DIV>
>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>but the 442s would be =3D
>>> ></FONT><FONT =3D3D
>>> > >face=3D3D3DArial=3D3D20
>>> > >size=3D3D3D2>a lot easier.</FONT></DIV>
>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Anyone know =
>>>Deej?</FONT></DIV>
>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Also I have to find the
=
>>>pin =3D
>>> >config for
>>> > =3D3D
>>> > >a 56 pin=3D3D20
>>> > >EDAC/ELCO ADAT</FONT></DIV>
>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>connector. I want to chop
>> =
>>>this =3D
>>> >=3D3D
>>> > >bad boy off=3D3D20
>>> > >and solder 16 TRS</FONT></DIV>
>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>to it. Anyone know =
>>>whether the =3D
>>> >=3D3D
>>> > >ADAT wiring is=3D3D20
>>> > >different than</FONT></DIV>
>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>standard?</FONT></DIV>
>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Thanks,</FONT></DIV>
>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Tom</FONT></DIV>
>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
>>> > ><DIV><FONT size=3D3D3D2><BR><BR>I choose Polesoft Lockspam to =
>>>fight =3D
>>> >spam, =3D3D
>>> > >and=3D3D20
>>> > >you?<BR><A=3D3D20
>>> > =3D
>>> =
>>>>>href=3D3D3D"http://www.polesoft.com/refer.html">http://www.polesoft.com=
>>>/re=3D
>>> >fer=3D3D
>>> > >.html</A> </FONT></DIV></BODY></HTML>
>>> > >
>>> > >
>>> >
>>> >
>>> ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
>>> ><HTML><HEAD>
>>> ><META http-equiv=3D3DContent-Type content=3D3D"text/html; =3D
>>> >charset=3D3Diso-8859-1">
>>> ><META content=3D3D"MSHTML 6.00.2800.1400" name=3D3DGENERATOR>
>>> ><STYLE></STYLE>
>>> ></HEAD>
>>> ><BODY bgColor=3D3D#ffffff>
>>> ><DIV><FONT face=3D3DArial size=3D3D2>Hey Rod,</FONT></DIV>
>>> ><DIV><FONT face=3D3DArial size=3D3D2>That sounds promising. What =
>>>cards =3D
>>> >do you have=3D20
>>> >the</FONT></DIV>
>>> ><DIV><FONT face=3D3DArial size=3D3D2>Mecs and 442 connected =
>>>to?</FONT></DIV>
>>> ><DIV><FONT face=3D3DArial size=3D3D2>Tom</FONT></DIV>
>>> ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
>>> ><DIV> </DIV>
>>> ><BLOCKQUOTE=3D20
>>> >style=3D3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px;
=
>>>=3D
>>> >BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
>>> > <DIV>"Rod Lincoln" <<A=3D20
>>> > =3D
>>> =
>>>>href=3D3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A=
>>>>&g=3D
>>> >t;=3D20
>>> > wrote in message <A=3D20
>>> > =3D
>>> =
>>>>href=3D3D"news:46451438$1@linux">news:46451438$1@linux</A>...</DIV><BR>I=
>>>'ve=3D
>>> > got 2=3D20
>>> > mecs and a 442 working here, no problems at all.<BR>I'm also =
>>>clocking
>>> =3D
>>> >with the=3D20
>>> > old Lucid genX word clock. 5 modules in one mec,<BR>4 modules in
=
>>>the =3D
>>> >other. 1=3D20
>>> > adat card each. 6 eds cards, 3 UAD cards, all in<BR>a magma. Oh =
>>>yeah,
>>> =3D
>>> >a Lynx=3D20
>>> > one in the computer also.<BR>Rod<BR>"Tom Bruhl" <<A=3D20
>>> > href=3D3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20
>>> > wrote:<BR>><BR>><BR>>I'll be buying either two MECs or two =3D
>>> >442s but=3D20
>>> > don't want it<BR>>to mess my whole rig up if the 442s don't =
>>>play=3D20
>>> > nice.<BR>>I am using an older Lucid clock now with 2 Mecs=3D20
>>> > already.<BR>>They each have five modules in them. The others=3D20
>>> > may<BR>>see a single ADAT at most someday maybe.<BR>><BR>>I =3D
>>> >can make=3D20
>>> > the MECs fit in the machine room with the others<BR>>but the 442s
=
>>>=3D
>>> >would be=3D20
>>> > a lot easier.<BR>><BR>>Anyone know Deej?<BR>><BR>>Also I =3D
>>> >have to=3D20
>>> > find the pin config for a 56 pin EDAC/ELCO =3D
>>> >ADAT<BR>>connector. I want=3D20
>>> > to chop this bad boy off and solder 16 TRS<BR>>to it. Anyone =3D
>>> >know=3D20
>>> > whether the ADAT wiring is different=3D20
>>> > =3D
>>> >than<BR>>standard?<BR>>Thanks,<BR>>Tom<BR>><BR>><BR >><B=3D
>>> >R>><BR>>I=3D20
>>> > choose Polesoft Lockspam to fight spam, and=3D20
>>> > you?<BR>>http://www.polesoft.com/refer.html =3D20
>>> > <BR>><BR>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0=3D20
>>> > Transitional//EN"><BR>><HTML><HEAD><BR>><META=3D20
>>> > http-equiv=3D3D3DContent-Type content=3D3D3D"text/html;=3D20
>>> > =3D3D<BR>>charset=3D3D3Diso-8859-1"><BR>><META =3D
>>> >content=3D3D3D"MSHTML=3D20
>>> > 6.00.2800.1400"=3D20
>>> > =3D
>>> >name=3D3D3DGENERATOR><BR>><STYLE></STYLE><BR>></HEA=3D
>>> >D><BR>><BODY=3D20
>>> > bgColor=3D3D3D#ffffff><BR>><DIV><FONT face=3D3D3DArial =3D
>>> >size=3D3D3D2>I'll=3D20
>>> > be buying either two MECs or two =3D3D<BR>>442s =
>>>but=3D3D20<BR>>don't =3D
>>> >want=3D20
>>> > it</FONT></DIV><BR>><DIV><FONT face=3D3D3DArial=3D20
>>> > size=3D3D3D2>to mess my whole rig up if the 442s =
>>>=3D3D<BR>>don't=3D20
>>> > =3D
>>> >play=3D3D20<BR>>nice.</FONT></DIV><BR>><DIV><FON=3D
>>> >T=3D20
>>> > face=3D3D3DArial size=3D3D3D2>I am using an older Lucid clock now
=
>>>=3D
>>> >=3D3D<BR>>with 2=3D20
>>> > =3D
>>> >Mecs=3D3D20<BR>>already.</FONT></DIV><BR>><DIV><=3D
>>> >FONT=3D20
>>> > face=3D3D3DArial size=3D3D3D2>They each have five modules in =3D
>>> >=3D3D<BR>>them.=3D20
>>> > The=3D3D20<BR>>others =3D
>>> >may</FONT></DIV><BR>><DIV><FONT=3D20
>>> > face=3D3D3DArial size=3D3D3D2>see a single ADAT at most=3D20
>>> > =3D
>>> >someday=3D3D20<BR>>maybe.</FONT></DIV><BR>><DIV><=3D
>>> >;FONT=3D20
>>> > face=3D3D3DArial size=3D3D3D2></FONT> =3D
>>> ></DIV><BR>><DIV><FONT=3D20
>>> > face=3D3D3DArial size=3D3D3D2>I can make the MECs fit in the=3D20
>>> > machine<BR>=3D3D<BR>>room with=3D3D20<BR>>the=3D20
>>> > others</FONT></DIV><BR>><DIV><FONT =3D
>>> >face=3D3D3DArial=3D20
>>> > size=3D3D3D2>but the 442s would be </FONT><FONT=3D20
>>> > =3D3D<BR>>face=3D3D3DArial=3D3D20<BR>>size=3D3D3D2>a lot=3D20
>>> > easier.</FONT></DIV><BR>><DIV><FONT =3D
>>> >face=3D3D3DArial=3D20
>>> > size=3D3D3D2></FONT> </DIV><BR>><DIV><FONT =3D
>>> >face=3D3D3DArial=3D20
>>> > size=3D3D3D2>Anyone know=3D20
>>> > Deej?</FONT></DIV><BR>><DIV><FONT =3D
>>> >face=3D3D3DArial=3D20
>>> > size=3D3D3D2></FONT> </DIV><BR>><DIV><FONT =3D
>>> >face=3D3D3DArial=3D20
>>> > size=3D3D3D2>Also I have to find the pin config for<BR>=3D3D<BR>>a
>> =
>>>=3D
>>> >56=3D20
>>> > pin=3D3D20<BR>>EDAC/ELCO=3D20
>>> > ADAT</FONT></DIV><BR>><DIV><FONT =3D
>>> >face=3D3D3DArial=3D20
>>> > size=3D3D3D2>connector. I want to chop this =3D3D<BR>>bad boy =3D
>>> >off=3D3D20<BR>>and=3D20
>>> > solder 16 TRS</FONT></DIV><BR>><DIV><FONT =3D
>>> >face=3D3D3DArial=3D20
>>> > size=3D3D3D2>to it. Anyone know whether the =3D3D<BR>>ADAT =
>>>wiring=3D20
>>> > is=3D3D20<BR>>different=3D20
>>> > than</FONT></DIV><BR>><DIV><FONT =3D
>>> >face=3D3D3DArial=3D20
>>> > =3D
>>> >size=3D3D3D2>standard?</FONT></DIV><BR>><DIV><FO=3D
>>> >NT=3D20
>>> > face=3D3D3DArial=3D20
>>> > =3D
>>> >size=3D3D3D2>Thanks,</FONT></DIV><BR>><DIV><FONT=3D
>>> >=3D20
>>> > face=3D3D3DArial=3D20
>>> > size=3D3D3D2>Tom</FONT></DIV><BR>><DIV><FONT=3D20
>>> > face=3D3D3DArial size=3D3D3D2></FONT> =3D
>>> ></DIV><BR>><DIV><FONT=3D20
>>> > face=3D3D3DArial size=3D3D3D2></FONT> =3D
>>> ></DIV><BR>><DIV><FONT=3D20
>>> > size=3D3D3D2><BR><BR>I choose Polesoft Lockspam to fight =3D
>>> >spam,=3D20
>>> > =3D
>>> >=3D3D<BR>>and=3D3D20<BR>>you?<BR><A=3D3D20<BR>>href=3D3D3D "<A=3D20
>>> > =3D
>>> =
>>>>href=3D3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/re=
>>>fer=3D
>>> =
>>>>'>http://www.polesoft.com/refer.html">http://www.polesoft.com/refer</A=3D=
>>>
>>> >>=3D3D<BR>>.html</A>=3D20
>>> > =3D
>>> ></FONT></DIV></BODY></HTML><BR>><BR>><BR></=3D
>>> >BLOCKQUOTE></BODY></HTML>
>>> >
>>> >
>>>
>>>
>>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
>>><HTML><HEAD>
>>><META http-equiv=3DContent-Type content=3D"text/html; =
>>>charset=3Diso-8859-1">
>>><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
>>><STYLE></STYLE>
>>></HEAD>
>>><BODY bgColor=3D#ffffff>
>>><DIV><FONT face=3DArial size=3D2>What do you guys think,</FONT></DIV>
>>><DIV><FONT face=3DArial size=3D2>What are my chances of getting two 442s
>> =
>>>in the=20
>>>mix</FONT></DIV>
>>><DIV><FONT face=3DArial size=3D2>without my Mecs losing some of=20
>>>their cards?</FONT></DIV>
>>><DIV><FONT face=3DArial size=3D2>T.</FONT></DIV>
>>><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>>><BLOCKQUOTE=20
>>>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>>>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
>>> <DIV>"Rod Lincoln" <<A=20
>>> =
>>>href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&g=
>>>t;=20
>>> wrote in message <A=20
>>> =
>>>href=3D"news:46453f51$1@linux">news:46453f51$1@linux</A>...</DIV><BR>Mec
>> =
>>>1 on=20
>>> card A, 442 on Card B, Mec 2 on Card F (my last card)<BR>I'm running
=
>>>spdif out=20
>>> of Mec 1 to a DAC 1<BR>Rod<BR>"Tom Bruhl" <<A=20
>>> href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=20
>>> wrote:<BR>><BR>><BR>>Hey Rod,<BR>>That sounds =
>>>promising. =20
>>> What cards do you have the<BR>>Mecs and 442 connected=20
>>> to?<BR>>Tom<BR>><BR>><BR>> "Rod Lincoln" <<A=20
>>> =
>>>href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&g=
>>>t;=20
>>> wrote in message =
>>>=3D<BR>>news:46451438$1@linux...<BR>><BR>> I've=20
>>> got 2 mecs and a 442 working here, no problems at all.<BR>> =
>>>I'm also=20
>>> clocking with the old Lucid genX word clock. 5 modules in=20
>>> one<BR>=3D<BR>>mec,<BR>> 4 modules in the other. 1 adat =
>>>card each. 6=20
>>> eds cards, 3 UAD cards, =3D<BR>>all in<BR>> a magma. Oh =
>>>yeah, a Lynx=20
>>> one in the computer also.<BR>> Rod<BR>> "Tom Bruhl" =
>>><<A=20
>>> href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=20
>>> wrote:<BR>> ><BR>> ><BR>> >I'll be =
>>>buying=20
>>> either two MECs or two 442s but don't want it<BR>> >to =
>>>mess my=20
>>> whole rig up if the 442s don't play nice.<BR>> >I am using =
>>>an=20
>>> older Lucid clock now with 2 Mecs already.<BR>> >They each =
>>>have=20
>>> five modules in them. The others may<BR>> >see a =
>>>single ADAT=20
>>> at most someday maybe.<BR>> ><BR>> >I can make =
>>>the=20
>>> MECs fit in the machine room with the others<BR>> >but the =
>>>442s=20
>>> would be a lot easier.<BR>> ><BR>> >Anyone =
>>>know=20
>>> Deej?<BR>> ><BR>> >Also I have to find the pin =
>>>config=20
>>> for a 56 pin EDAC/ELCO ADAT<BR>> >connector. I want =
>>>to chop=20
>>> this bad boy off and solder 16 TRS<BR>> >to it. =
>>>Anyone know=20
>>> whether the ADAT wiring is different than<BR>> =20
>>> >standard?<BR>> >Thanks,<BR>> =
>>>>Tom<BR>> =20
>>> ><BR>> ><BR>> ><BR>> =
>>>><BR>> =20
>>> >I choose Polesoft Lockspam to fight spam, and you?<BR>> =20
>>> >http://www.polesoft.com/refer.html =3D20<BR>> =20
>>> ><BR>> ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0=20
>>> Transitional//EN"><BR>> =
>>>><HTML><HEAD><BR>> =20
>>> ><META http-equiv=3D3D3DContent-Type content=3D3D3D"text/html;=20
>>> =3D3D<BR>> >charset=3D3D3Diso-8859-1"><BR>> =
>>>><META=20
>>> content=3D3D3D"MSHTML 6.00.2800.1400" =
>>>name=3D3D3DGENERATOR><BR>> =20
>>> ><STYLE></STYLE><BR>> =
>>>></HEAD><BR>> =20
>>> ><BODY bgColor=3D3D3D#ffffff><BR>> =
>>>><DIV><FONT=20
>>> face=3D3D3DArial size=3D3D3D2>I'll be buying either two MECs =
>>>=3D<BR>>or two=20
>>> =3D3D<BR>> >442s but=3D3D20<BR>> >don't want=20
>>> it</FONT></DIV><BR>> ><DIV><FONT=20
>>> face=3D3D3DArial size=3D3D3D2>to mess my whole rig up if the =
>>>=3D<BR>>442s=20
>>> =3D3D<BR>> >don't play=3D3D20<BR>> =20
>>> >nice.</FONT></DIV><BR>> =
>>>><DIV><FONT=20
>>> face=3D3D3DArial size=3D3D3D2>I am using an older Lucid =
>>>clock<BR>=3D<BR>>now=20
>>> =3D3D<BR>> >with 2 Mecs=3D3D20<BR>> =20
>>> >already.</FONT></DIV><BR>> =
>>>><DIV><FONT=20
>>> face=3D3D3DArial size=3D3D3D2>They each have five modules in=20
>>> =3D<BR>>=3D3D<BR>> >them. The=3D3D20<BR>> =
>>>>others=20
>>> may</FONT></DIV><BR>> ><DIV><FONT=20
>>> face=3D3D3DArial size=3D3D3D2>see a single ADAT at most=20
>>> =3D<BR>>someday=3D3D20<BR>> =20
>>> >maybe.</FONT></DIV><BR>> =
>>>><DIV><FONT=20
>>> face=3D3D3DArial size=3D3D3D2></FONT> =
>>></DIV><BR>> =20
>>> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>I can make =
>>>the MECs fit=20
>>> in the =3D<BR>>machine<BR>> =3D3D<BR>> >room=20
>>> with=3D3D20<BR>> >the =
>>>others</FONT></DIV><BR>> =20
>>> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>but the 442s =
>>>would be=20
>>> =3D<BR>></FONT><FONT =3D3D<BR>> =20
>>> >face=3D3D3DArial=3D3D20<BR>> >size=3D3D3D2>a lot=20
>>> easier.</FONT></DIV><BR>> ><DIV><FONT =
>>>
>>> face=3D3D3DArial size=3D3D3D2></FONT> =
>>></DIV><BR>> =20
>>> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Anyone know=20
>>> Deej?</FONT></DIV><BR>> ><DIV><FONT=20
>>> face=3D3D3DArial size=3D3D3D2></FONT> =
>>></DIV><BR>> =20
>>> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Also I have =
>>>to find the=20
>>> pin =3D<BR>>config for<BR>> =3D3D<BR>> >a 56=20
>>> pin=3D3D20<BR>> >EDAC/ELCO=20
>>> ADAT</FONT></DIV><BR>> ><DIV><FONT=20
>>> face=3D3D3DArial size=3D3D3D2>connector. I want to chop this=20
>>> =3D<BR>>=3D3D<BR>> >bad boy off=3D3D20<BR>> =
>>>>and solder=20
>>> 16 TRS</FONT></DIV><BR>> ><DIV><FONT=20
>>> face=3D3D3DArial size=3D3D3D2>to it. Anyone know whether the=20
>>> =3D<BR>>=3D3D<BR>> >ADAT wiring is=3D3D20<BR>> =
>>>>different=20
>>> than</FONT></DIV><BR>> ><DIV><FONT=20
>>> face=3D3D3DArial =
>>>size=3D3D3D2>standard?</FONT></DIV><BR>> =20
>>> ><DIV><FONT face=3D3D3DArial=20
>>> size=3D3D3D2>Thanks,</FONT></DIV><BR>> =20
>>> ><DIV><FONT face=3D3D3DArial=20
>>> size=3D3D3D2>Tom</FONT></DIV><BR>> =20
>>> ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> =
>>>
>>> </DIV><BR>> ><DIV><FONT face=3D3D3DArial=20
>>> size=3D3D3D2></FONT> </DIV><BR>> =
>>>><DIV><FONT=20
>>> size=3D3D3D2><BR><BR>I choose Polesoft Lockspam to =
>>>fight=20
>>> =3D<BR>>spam, =3D3D<BR>> >and=3D3D20<BR>> =20
>>> >you?<BR><A=3D3D20<BR>> =
>>>=3D<BR>>>href=3D3D3D"<A=20
>>> =
>>>href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/re'>h=
>>>ttp://www.polesoft.com/refer.html">http://www.polesoft.com/re</A>=3D<B=
>>>R>>fer=3D3D<BR>> =20
>>> >.html</A>=20
>>> </FONT></DIV></BODY></HTML><BR>> =20
>>> ><BR>> ><BR>><BR>><BR>><!DOCTYPE HTML =
>>>PUBLIC=20
>>> "-//W3C//DTD HTML 4.0=20
>>> Transitional//EN"><BR>><HTML><HEAD><BR>><META=20
>>> http-equiv=3D3DContent-Type content=3D3D"text/html;=20
>>> =3D<BR>>charset=3D3Diso-8859-1"><BR>><META =
>>>content=3D3D"MSHTML=20
>>> 6.00.2800.1400"=20
>>> =
>>>name=3D3DGENERATOR><BR>><STYLE></STYLE><BR>></HEA=
>>>D><BR>><BODY=20
>>> bgColor=3D3D#ffffff><BR>><DIV><FONT face=3D3DArial =
>>>size=3D3D2>Hey=20
>>> Rod,</FONT></DIV><BR>><DIV><FONT =
>>>face=3D3DArial=20
>>> size=3D3D2>That sounds promising. What cards =3D<BR>>do you=20
>>> =
>>>have=3D20<BR>>the</FONT></DIV><BR>><DIV><FONT =
>>>
>>> face=3D3DArial size=3D3D2>Mecs and 442 connected=20
>>> to?</FONT></DIV><BR>><DIV><FONT face=3D3DArial =
>>>
>>> size=3D3D2>Tom</FONT></DIV><BR>><DIV><FONT=20
>>> face=3D3DArial size=3D3D2></FONT> =
>>></DIV><BR>><DIV>=20
>>> =
>>></DIV><BR>><BLOCKQUOTE=3D20<BR>>style=3D3D"PADDING-RIGHT: =
>>>0px;=20
>>> PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =3D<BR>>BORDER-LEFT: #000000 =
>>>2px solid;=20
>>> MARGIN-RIGHT: 0px"><BR>> <DIV>"Rod Lincoln"=20
>>> <<A=3D20<BR>> =3D<BR>>href=3D3D"<A=20
>>> =
>>>href=3D'mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&a=
>>>mp;g'>mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</=
>>>A>&g</A>=3D<BR>>t;=3D20<BR>> =20
>>> wrote in message <A=3D20<BR>> =3D<BR>>href=3D3D"<A=20
>>> =
>>>href=3D"news:46451438$1@linux">news:46451438$1@linux</A>...</DIV><BR=
>>>>I've">news:46451438$1@linux">news:46451438$1@linux</A>...</D=
>>>IV><BR>I've</A>=3D<BR>>=20
>>> got 2=3D20<BR>> mecs and a 442 working here, no problems at=20
>>> all.<BR>I'm also clocking<BR>=3D<BR>>with =
>>>the=3D20<BR>> old=20
>>> Lucid genX word clock. 5 modules in one mec,<BR>4 modules in the =
>>>
>>> =3D<BR>>other. 1=3D20<BR>> adat card each. 6 eds cards, 3 =
>>>UAD cards,=20
>>> all in<BR>a magma. Oh yeah,<BR>=3D<BR>>a =
>>>Lynx=3D20<BR>> one in=20
>>> the computer also.<BR>Rod<BR>"Tom Bruhl"=20
>>> <<A=3D20<BR>> href=3D3D"<A=20
>>> =
>>>href=3D'mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20'>mailto=
>>>:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20</A><BR>&g=
>>>t; =20
>>> wrote:<BR>><BR>><BR>>I'll be buying either =
>>>two MECs=20
>>> or two =3D<BR>>442s but=3D20<BR>> don't want =
>>>it<BR>>to mess=20
>>> my whole rig up if the 442s don't play=3D20<BR>> =
>>>nice.<BR>>I=20
>>> am using an older Lucid clock now with 2 Mecs=3D20<BR>> =20
>>> already.<BR>>They each have five modules in them. The=20
>>> others=3D20<BR>> may<BR>>see a single ADAT at most =
>>>someday=20
>>> maybe.<BR>><BR>>I =3D<BR>>can =
>>>make=3D20<BR>> the=20
>>> MECs fit in the machine room with the others<BR>>but the 442s =
>>>
>>> =3D<BR>>would be=3D20<BR>> a lot=20
>>> easier.<BR>><BR>>Anyone know=20
>>> Deej?<BR>><BR>>Also I =3D<BR>>have =
>>>to=3D20<BR>> find=20
>>> the pin config for a 56 pin EDAC/ELCO =
>>>=3D<BR>>ADAT<BR>>connector. I=20
>>> want=3D20<BR>> to chop this bad boy off and solder 16=20
>>> TRS<BR>>to it. Anyone =3D<BR>>know=3D20<BR>> =
>>>whether the ADAT=20
>>> wiring is different=3D20<BR>> =20
>>> =
>>>=3D<BR>>than<BR>>standard?<BR>>Thanks,<BR>>=
>>>Tom<BR>><BR>><BR>><B=3D<BR>>R>><=
>>>;BR>>I=3D20<BR>> =20
>>> choose Polesoft Lockspam to fight spam, and=3D20<BR>> =20
>>> you?<BR>>http://www.polesoft.com/refer.html =
>>>=3D20<BR>> =20
>>> <BR>><BR>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML =
>>>
>>> 4.0=3D20<BR>> =20
>>> =
>>>Transitional//EN"><BR>><HTML><HEAD><BR>>=
>>><META=3D20<BR>> =20
>>> http-equiv=3D3D3DContent-Type =
>>>content=3D3D3D"text/html;=3D20<BR>> =20
>>> =3D3D<BR>>charset=3D3D3Diso-8859-1"><BR>><META =
>>>
>>> =3D<BR>>content=3D3D3D"MSHTML=3D20<BR>> =
>>>6.00.2800.1400"=3D20<BR>> =20
>>> =
>>>=3D<BR>>name=3D3D3DGENERATOR><BR>><STYLE></STYLE&=
>>>gt;<BR>></HEA=3D<BR>>D><BR>><BODY=3D20<BR>&=
>>>gt; =20
>>> bgColor=3D3D3D#ffffff><BR>><DIV><FONT =
>>>face=3D3D3DArial=20
>>> =3D<BR>>size=3D3D3D2>I'll=3D20<BR>> be buying either =
>>>two MECs or two=20
>>> =3D3D<BR>>442s but=3D3D20<BR>>don't=20
>>> =3D<BR>>want=3D20<BR>> =20
>>> it</FONT></DIV><BR>><DIV><FONT=20
>>> face=3D3D3DArial=3D20<BR>> size=3D3D3D2>to mess my whole =
>>>rig up if the=20
>>> 442s =3D3D<BR>>don't=3D20<BR>> =20
>>> =
>>>=3D<BR>>play=3D3D20<BR>>nice.</FONT></DIV><BR&=
>>>gt;><DIV><FON=3D<BR>>T=3D20<BR>> =20
>>> face=3D3D3DArial size=3D3D3D2>I am using an older Lucid clock now=20
>>> =3D<BR>>=3D3D<BR>>with 2=3D20<BR>> =20
>>> =
>>>
>> =3D<BR>>Mecs=3D3D20<BR>>already.</FONT></DIV><=
>>>BR>><DIV><=3D<BR>>FONT=3D20<BR>> =20
>>> face=3D3D3DArial size=3D3D3D2>They each have five modules in=20
>>> =3D<BR>>=3D3D<BR>>them.=3D20<BR>> =
>>>The=3D3D20<BR>>others=20
>>> =
>>>=3D<BR>>may</FONT></DIV><BR>><DIV><FONT=3D=
>>>20<BR>> =20
>>> face=3D3D3DArial size=3D3D3D2>see a single ADAT at =
>>>most=3D20<BR>> =20
>>> =
>>>=3D<BR>>someday=3D3D20<BR>>maybe.</FONT></DIV><=
>>>;BR>><DIV><=3D<BR>>;FONT=3D20<BR>> =20
>>> face=3D3D3DArial size=3D3D3D2></FONT>=20
>>> =
>>>=3D<BR>></DIV><BR>><DIV><FONT=3D20<BR>>&nbs=
>>>p;=20
>>> face=3D3D3DArial size=3D3D3D2>I can make the MECs fit in =
>>>the=3D20<BR>> =20
>>> machine<BR>=3D3D<BR>>room=20
>>> with=3D3D20<BR>>the=3D20<BR>> =20
>>> others</FONT></DIV><BR>><DIV><FONT=20
>>> =3D<BR>>face=3D3D3DArial=3D20<BR>> size=3D3D3D2>but the =
>>>442s would be=20
>>> </FONT><FONT=3D20<BR>> =20
>>> =
>>>=3D3D<BR>>face=3D3D3DArial=3D3D20<BR>>size=3D3D3D2>a=
>>>=20
>>> lot=3D20<BR>> =20
>>> easier.</FONT></DIV><BR>><DIV><FONT=20
>>> =3D<BR>>face=3D3D3DArial=3D20<BR>> =
>>>size=3D3D3D2></FONT>=20
>>> </DIV><BR>><DIV><FONT=20
>>> =3D<BR>>face=3D3D3DArial=3D20<BR>> size=3D3D3D2>Anyone=20
>>> know=3D20<BR>> =20
>>> Deej?</FONT></DIV><BR>><DIV><FONT=20
>>> =3D<BR>>face=3D3D3DArial=3D20<BR>> =
>>>size=3D3D3D2></FONT>=20
>>> </DIV><BR>><DIV><FONT=20
>>> =3D<BR>>face=3D3D3DArial=3D20<BR>> size=3D3D3D2>Also I =
>>>have to find the=20
>>> pin config for<BR>=3D3D<BR>>a =
>>>=3D<BR>>56=3D20<BR>> =20
>>> pin=3D3D20<BR>>EDAC/ELCO=3D20<BR>> =20
>>> ADAT</FONT></DIV><BR>><DIV><FONT=20
>>> =3D<BR>>face=3D3D3DArial=3D20<BR>> =
>>>size=3D3D3D2>connector. I want to=20
>>> chop this =3D3D<BR>>bad boy=20
>>> =3D<BR>>off=3D3D20<BR>>and=3D20<BR>> solder 16=20
>>> TRS</FONT></DIV><BR>><DIV><FONT=20
>>> =3D<BR>>face=3D3D3DArial=3D20<BR>> size=3D3D3D2>to it. =
>>>Anyone know=20
>>> whether the =3D3D<BR>>ADAT wiring=3D20<BR>> =20
>>> is=3D3D20<BR>>different=3D20<BR>> =20
>>> than</FONT></DIV><BR>><DIV><FONT=20
>>> =3D<BR>>face=3D3D3DArial=3D20<BR>> =20
>>> =
>>>=3D<BR>>size=3D3D3D2>standard?</FONT></DIV><BR>&g=
>>>t;<DIV><FO=3D<BR>>NT=3D20<BR>> =20
>>> face=3D3D3DArial=3D20<BR>> =20
>>> =
>>>=3D<BR>>size=3D3D3D2>Thanks,</FONT></DIV><BR>>=
>>><DIV><FONT=3D<BR>>=3D20<BR>> =20
>>> face=3D3D3DArial=3D20<BR>> =20
>>> =
>>>size=3D3D3D2>Tom</FONT></DIV><BR>><DIV><=
>>>FONT=3D20<BR>> =20
>>> face=3D3D3DArial size=3D3D3D2></FONT>=20
>>> =
>>>=3D<BR>></DIV><BR>><DIV><FONT=3D20<BR>>&nbs=
>>>p;=20
>>> face=3D3D3DArial size=3D3D3D2></FONT>=20
>>> =
>>>=3D<BR>></DIV><BR>><DIV><FONT=3D20<BR>>&nbs=
>>>p;=20
>>> size=3D3D3D2><BR><BR>I choose Polesoft Lockspam to =
>>>fight=20
>>> =3D<BR>>spam,=3D20<BR>> =20
>>> =
>>>=3D<BR>>=3D3D<BR>>and=3D3D20<BR>>you?<BR><A=
>>>=3D3D20<BR>>href=3D3D3D"<A=3D20<BR>> =20
>>> =
>>>=3D<BR>>href=3D3D'http://www.polesoft.com/refer.html">http://www.po=
>>>lesoft.com/refer=3D<BR>>'>http://www.polesoft.com/refer.html">ht=
>>>tp://www.polesoft.com/refer</A=3D<BR>>>=3D3D<BR>>.html&=
>>>lt;/A>=3D20<BR>> =20
>>> =
>>>=3D<BR>></FONT></DIV></BODY></HTML><BR>&=
>>>gt;<BR>><BR></=3D<BR>>BLOCKQUOTE></BODY><=
>>>;/HTML><BR>><BR>><BR></BLOCKQUOTE></BODY></HTML>
>>>
>>>
>>
>
>
|
|
|
|
| Re: Paris 3.0/XP MECs and 442s work nicely or no? Also Elco pin out. . . [message #84410 is a reply to message #84409] |
Sat, 12 May 2007 13:53 |
Deej [4]
Messages: 1292
Registered: January 2007
|
Senior Member |
|
|
Hmmmm...........maybe so. ;o) How many/what kind of I/O modules do you have
in the MEC that is on Card A?
"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message
news:46462845$1@linux...
>
> My 442 works reliably off the B card. maybe DJ slapped some sense into it.
> ;-)
> Rod
> "DJ" <www.aarrrrggghhh!!!.com> wrote:
>>IIRC 442's are initialized differently from the MEC and need to be hung
> off
>>Card A to work reliablein a multi interface setup. this will necessitate
>
>>using the 20 bit I/O for monitoring the mix.
>>
>>"Dimitrios" <musurgio@otenet.gr> wrote in message news:46456534$1@linux...
>>>
>>> Hi Tom,
>>> When I tried this 442 and mec combination I only found a working clocked
>>> system if 442 was a master so 20 bits versus 24 was inportant to me for
>
>>> monitoring
>>> ! (I still record only 16 bits !).
>>> What though was evident is that I could NEVER have the ins and outs of
> 442
>>> working correctly.
>>> You know sometimes we use 442 along mec and we mostly don't use much of
>
>>> 442
>>> except for a spdif or something.
>>> It would be nice if someone could CHECK that in a multi mec 442 system
> ALL
>>> 442's ins and outs along with mec's are working correctly.
>>> I know this is much to ask but Tom (and I at least) would love that kind
>>> of testing info.
>>> A 442 would be a great addition to me IF mec could be main card A and
> all
>>> ins and outs of everything would work.
>>> Is this an XP problem or is it the same as in win98 or Me ?
>>> Regards,
>>> Dimitrios
>>>
>>> "Tom Bruhl" <arpegio@comcast.net> wrote:
>>>>
>>>>
>>>>What do you guys think,
>>>>What are my chances of getting two 442s in the mix
>>>>without my Mecs losing some of their cards?
>>>>T.
>>>>
>>>> "Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message =
>>>>news:46453f51$1@linux...
>>>>
>>>> Mec 1 on card A, 442 on Card B, Mec 2 on Card F (my last card)
>>>> I'm running spdif out of Mec 1 to a DAC 1
>>>> Rod
>>>> "Tom Bruhl" <arpegio@comcast.net> wrote:
>>>> >
>>>> >
>>>> >Hey Rod,
>>>> >That sounds promising. What cards do you have the
>>>> >Mecs and 442 connected to?
>>>> >Tom
>>>> >
>>>> >
>>>> > "Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message =3D
>>>> >news:46451438$1@linux...
>>>> >
>>>> > I've got 2 mecs and a 442 working here, no problems at all.
>>>> > I'm also clocking with the old Lucid genX word clock. 5 modules in
>>> =
>>>>one
>>>> =3D
>>>> >mec,
>>>> > 4 modules in the other. 1 adat card each. 6 eds cards, 3 UAD cards,
>>> =
>>>>=3D
>>>> >all in
>>>> > a magma. Oh yeah, a Lynx one in the computer also.
>>>> > Rod
>>>> > "Tom Bruhl" <arpegio@comcast.net> wrote:
>>>> > >
>>>> > >
>>>> > >I'll be buying either two MECs or two 442s but don't want it
>>>> > >to mess my whole rig up if the 442s don't play nice.
>>>> > >I am using an older Lucid clock now with 2 Mecs already.
>>>> > >They each have five modules in them. The others may
>>>> > >see a single ADAT at most someday maybe.
>>>> > >
>>>> > >I can make the MECs fit in the machine room with the others
>>>> > >but the 442s would be a lot easier.
>>>> > >
>>>> > >Anyone know Deej?
>>>> > >
>>>> > >Also I have to find the pin config for a 56 pin EDAC/ELCO ADAT
>>>> > >connector. I want to chop this bad boy off and solder 16 TRS
>>>> > >to it. Anyone know whether the ADAT wiring is different than
>>>> > >standard?
>>>> > >Thanks,
>>>> > >Tom
>>>> > >
>>>> > >
>>>> > >
>>>> > >
>>>> > >I choose Polesoft Lockspam to fight spam, and you?
>>>> > >http://www.polesoft.com/refer.html =3D20
>>>> > >
>>>> > ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
>>>> > ><HTML><HEAD>
>>>> > ><META http-equiv=3D3D3DContent-Type content=3D3D3D"text/html; =
>>>>=3D3D
>>>> > >charset=3D3D3Diso-8859-1">
>>>> > ><META content=3D3D3D"MSHTML 6.00.2800.1400" name=3D3D3DGENERATOR>
>>>> > ><STYLE></STYLE>
>>>> > ></HEAD>
>>>> > ><BODY bgColor=3D3D3D#ffffff>
>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>I'll be buying either two
>>> =
>>>>MECs =3D
>>>> >or two =3D3D
>>>> > >442s but=3D3D20
>>>> > >don't want it</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>to mess my whole rig up
> =
>>>>if the =3D
>>>> >442s =3D3D
>>>> > >don't play=3D3D20
>>>> > >nice.</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>I am using an older Lucid
>>> =
>>>>clock
>>>> =3D
>>>> >now =3D3D
>>>> > >with 2 Mecs=3D3D20
>>>> > >already.</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>They each have five =
>>>>modules in =3D
>>>> >=3D3D
>>>> > >them. The=3D3D20
>>>> > >others may</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>see a single ADAT at most
>>> =
>>>>=3D
>>>> >someday=3D3D20
>>>> > >maybe.</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>I can make the MECs fit
> =
>>>>in the =3D
>>>> >machine
>>>> > =3D3D
>>>> > >room with=3D3D20
>>>> > >the others</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>but the 442s would be =3D
>>>> ></FONT><FONT =3D3D
>>>> > >face=3D3D3DArial=3D3D20
>>>> > >size=3D3D3D2>a lot easier.</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Anyone know =
>>>>Deej?</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Also I have to find the
> =
>>>>pin =3D
>>>> >config for
>>>> > =3D3D
>>>> > >a 56 pin=3D3D20
>>>> > >EDAC/ELCO ADAT</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>connector. I want to chop
>>> =
>>>>this =3D
>>>> >=3D3D
>>>> > >bad boy off=3D3D20
>>>> > >and solder 16 TRS</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>to it. Anyone know =
>>>>whether the =3D
>>>> >=3D3D
>>>> > >ADAT wiring is=3D3D20
>>>> > >different than</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>standard?</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Thanks,</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Tom</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
>>>> > ><DIV><FONT size=3D3D3D2><BR><BR>I choose Polesoft Lockspam to =
>>>>fight =3D
>>>> >spam, =3D3D
>>>> > >and=3D3D20
>>>> > >you?<BR><A=3D3D20
>>>> > =3D
>>>> =
>>>>>>href=3D3D3D"http://www.polesoft.com/refer.html">http://www.polesoft.com=
>>>>/re=3D
>>>> >fer=3D3D
>>>> > >.html</A> </FONT></DIV></BODY></HTML>
>>>> > >
>>>> > >
>>>> >
>>>> >
>>>> ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
>>>> ><HTML><HEAD>
>>>> ><META http-equiv=3D3DContent-Type content=3D3D"text/html; =3D
>>>> >charset=3D3Diso-8859-1">
>>>> ><META content=3D3D"MSHTML 6.00.2800.1400" name=3D3DGENERATOR>
>>>> ><STYLE></STYLE>
>>>> ></HEAD>
>>>> ><BODY bgColor=3D3D#ffffff>
>>>> ><DIV><FONT face=3D3DArial size=3D3D2>Hey Rod,</FONT></DIV>
>>>> ><DIV><FONT face=3D3DArial size=3D3D2>That sounds promising. What =
>>>>cards =3D
>>>> >do you have=3D20
>>>> >the</FONT></DIV>
>>>> ><DIV><FONT face=3D3DArial size=3D3D2>Mecs and 442 connected =
>>>>to?</FONT></DIV>
>>>> ><DIV><FONT face=3D3DArial size=3D3D2>Tom</FONT></DIV>
>>>> ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
>>>> ><DIV> </DIV>
>>>> ><BLOCKQUOTE=3D20
>>>> >style=3D3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px;
> =
>>>>=3D
>>>> >BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
>>>> > <DIV>"Rod Lincoln" <<A=3D20
>>>> > =3D
>>>> =
>>>>>href=3D3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A=
>>>>>&g=3D
>>>> >t;=3D20
>>>> > wrote in message <A=3D20
>>>> > =3D
>>>> =
>>>>>href=3D3D"news:46451438$1@linux">news:46451438$1@linux</A>...</DIV><BR>I=
>>>>'ve=3D
>>>> > got 2=3D20
>>>> > mecs and a 442 working here, no problems at all.<BR>I'm also =
>>>>clocking
>>>> =3D
>>>> >with the=3D20
>>>> > old Lucid genX word clock. 5 modules in one mec,<BR>4 modules in
> =
>>>>the =3D
>>>> >other. 1=3D20
>>>> > adat card each. 6 eds cards, 3 UAD cards, all in<BR>a magma. Oh =
>>>>yeah,
>>>> =3D
>>>> >a Lynx=3D20
>>>> > one in the computer also.<BR>Rod<BR>"Tom Bruhl" <<A=3D20
>>>> > href=3D3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20
>>>> > wrote:<BR>><BR>><BR>>I'll be buying either two MECs or two =3D
>>>> >442s but=3D20
>>>> > don't want it<BR>>to mess my whole rig up if the 442s don't =
>>>>play=3D20
>>>> > nice.<BR>>I am using an older Lucid clock now with 2 Mecs=3D20
>>>> > already.<BR>>They each have five modules in them. The others=3D20
>>>> > may<BR>>see a single ADAT at most someday maybe.<BR>><BR>>I =3D
>>>> >can make=3D20
>>>> > the MECs fit in the machine room with the others<BR>>but the 442s
> =
>>>>=3D
>>>> >would be=3D20
>>>> > a lot easier.<BR>><BR>>Anyone know Deej?<BR>><BR>>Also I =3D
>>>> >have to=3D20
>>>> > find the pin config for a 56 pin EDAC/ELCO =3D
>>>> >ADAT<BR>>connector. I want=3D20
>>>> > to chop this bad boy off and solder 16 TRS<BR>>to it. Anyone =3D
>>>> >know=3D20
>>>> > whether the ADAT wiring is different=3D20
>>>> > =3D
>>>> >than<BR>>standard?<BR>>Thanks,<BR>>Tom<BR>><BR>><BR >><B=3D
>>>> >R>><BR>>I=3D20
>>>> > choose Polesoft Lockspam to fight spam, and=3D20
>>>> > you?<BR>>http://www.polesoft.com/refer.html =3D20
>>>> > <BR>><BR>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0=3D20
>>>> > Transitional//EN"><BR>><HTML><HEAD><BR>><META=3D20
>>>> > http-equiv=3D3D3DContent-Type content=3D3D3D"text/html;=3D20
>>>> > =3D3D<BR>>charset=3D3D3Diso-8859-1"><BR>><META =3D
>>>> >content=3D3D3D"MSHTML=3D20
>>>> > 6.00.2800.1400"=3D20
>>>> > =3D
>>>> >name=3D3D3DGENERATOR><BR>><STYLE></STYLE><BR>></HEA=3D
>>>> >D><BR>><BODY=3D20
>>>> > bgColor=3D3D3D#ffffff><BR>><DIV><FONT face=3D3D3DArial =3D
>>>> >size=3D3D3D2>I'll=3D20
>>>> > be buying either two MECs or two =3D3D<BR>>442s =
>>>>but=3D3D20<BR>>don't =3D
>>>> >want=3D20
>>>> > it</FONT></DIV><BR>><DIV><FONT face=3D3D3DArial=3D20
>>>> > size=3D3D3D2>to mess my whole rig up if the 442s =
>>>>=3D3D<BR>>don't=3D20
>>>> > =3D
>>>> >play=3D3D20<BR>>nice.</FONT></DIV><BR>><DIV><FON=3D
>>>> >T=3D20
>>>> > face=3D3D3DArial size=3D3D3D2>I am using an older Lucid clock now
> =
>>>>=3D
>>>> >=3D3D<BR>>with 2=3D20
>>>> > =3D
>>>> >Mecs=3D3D20<BR>>already.</FONT></DIV><BR>><DIV><=3D
>>>> >FONT=3D20
>>>> > face=3D3D3DArial size=3D3D3D2>They each have five modules in =3D
>>>> >=3D3D<BR>>them.=3D20
>>>> > The=3D3D20<BR>>others =3D
>>>> >may</FONT></DIV><BR>><DIV><FONT=3D20
>>>> > face=3D3D3DArial size=3D3D3D2>see a single ADAT at most=3D20
>>>> > =3D
>>>> >someday=3D3D20<BR>>maybe.</FONT></DIV><BR>><DIV><=3D
>>>> >;FONT=3D20
>>>> > face=3D3D3DArial size=3D3D3D2></FONT> =3D
>>>> ></DIV><BR>><DIV><FONT=3D20
>>>> > face=3D3D3DArial size=3D3D3D2>I can make the MECs fit in the=3D20
>>>> > machine<BR>=3D3D<BR>>room with=3D3D20<BR>>the=3D20
>>>> > others</FONT></DIV><BR>><DIV><FONT =3D
>>>> >face=3D3D3DArial=3D20
>>>> > size=3D3D3D2>but the 442s would be </FONT><FONT=3D20
>>>> > =3D3D<BR>>face=3D3D3DArial=3D3D20<BR>>size=3D3D3D2>a lot=3D20
>>>> > easier.</FONT></DIV><BR>><DIV><FONT =3D
>>>> >face=3D3D3DArial=3D20
>>>> > size=3D3D3D2></FONT> </DIV><BR>><DIV><FONT =3D
>>>> >face=3D3D3DArial=3D20
>>>> > size=3D3D3D2>Anyone know=3D20
>>>> > Deej?</FONT></DIV><BR>><DIV><FONT =3D
>>>> >face=3D3D3DArial=3D20
>>>> > size=3D3D3D2></FONT> </DIV><BR>><DIV><FONT =3D
>>>> >face=3D3D3DArial=3D20
>>>> > size=3D3D3D2>Also I have to find the pin config for<BR>=3D3D<BR>>a
>>> =
>>>>=3D
>>>> >56=3D20
>>>> > pin=3D3D20<BR>>EDAC/ELCO=3D20
>>>> > ADAT</FONT></DIV><BR>><DIV><FONT =3D
>>>> >face=3D3D3DArial=3D20
>>>> > size=3D3D3D2>connector. I want to chop this =3D3D<BR>>bad boy =3D
>>>> >off=3D3D20<BR>>and=3D20
>>>> > solder 16 TRS</FONT></DIV><BR>><DIV><FONT =3D
>>>> >face=3D3D3DArial=3D20
>>>> > size=3D3D3D2>to it. Anyone know whether the =3D3D<BR>>ADAT =
>>>>wiring=3D20
>>>> > is=3D3D20<BR>>different=3D20
>>>> > than</FONT></DIV><BR>><DIV><FONT =3D
>>>> >face=3D3D3DArial=3D20
>>>> > =3D
>>>> >size=3D3D3D2>standard?</FONT></DIV><BR>><DIV><FO=3D
>>>> >NT=3D20
>>>> > face=3D3D3DArial=3D20
>>>> > =3D
>>>> >size=3D3D3D2>Thanks,</FONT></DIV><BR>><DIV><FONT=3D
>>>> >=3D20
>>>> > face=3D3D3DArial=3D20
>>>> > size=3D3D3D2>Tom</FONT></DIV><BR>><DIV><FONT=3D20
>>>> > face=3D3D3DArial size=3D3D3D2></FONT> =3D
>>>> ></DIV><BR>><DIV><FONT=3D20
>>>> > face=3D3D3DArial size=3D3D3D2></FONT> =3D
>>>> ></DIV><BR>><DIV><FONT=3D20
>>>> > size=3D3D3D2><BR><BR>I choose Polesoft Lockspam to fight =3D
>>>> >spam,=3D20
>>>> > =3D
>>>> >=3D3D<BR>>and=3D3D20<BR>>you?<BR><A=3D3D20<BR>>href=3D3D3D "<A=3D20
>>>> > =3D
>>>> =
>>>>>href=3D3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/re=
>>>>fer=3D
>>>> =
>>>>>'>http://www.polesoft.com/refer.html">http://www.polesoft.com/refer</A=3D=
>>>>
>>>> >>=3D3D<BR>>.html</A>=3D20
>>>> > =3D
>>>> ></FONT></DIV></BODY></HTML><BR>><BR>><BR></=3D
>>>> >BLOCKQUOTE></BODY></HTML>
>>>> >
>>>> >
>>>>
>>>>
>>>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
>>>><HTML><HEAD>
>>>><META http-equiv=3DContent-Type content=3D"text/html; =
>>>>charset=3Diso-8859-1">
>>>><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
>>>><STYLE></STYLE>
>>>></HEAD>
>>>><BODY bgColor=3D#ffffff>
>>>><DIV><FONT face=3DArial size=3D2>What do you guys think,</FONT></DIV>
>>>><DIV><FONT face=3DArial size=3D2>What are my chances of getting two 442s
>>> =
>>>>in the=20
>>>>mix</FONT></DIV>
>>>><DIV><FONT face=3DArial size=3D2>without my Mecs losing some of=20
>>>>their cards?</FONT></DIV>
>>>><DIV><FONT face=3DArial size=3D2>T.</FONT></DIV>
>>>><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>>>><BLOCKQUOTE=20
>>>>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>>>>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
>>>> <DIV>"Rod Lincoln" <<A=20
>>>> =
>>>>href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&g=
>>>>t;=20
>>>> wrote in message <A=20
>>>> =
>>>>href=3D"news:46453f51$1@linux">news:46453f51$1@linux</A>...</DIV><BR>Mec
>>> =
>>>>1 on=20
>>>> card A, 442 on Card B, Mec 2 on Card F (my last card)<BR>I'm running
> =
>>>>spdif out=20
>>>> of Mec 1 to a DAC 1<BR>Rod<BR>"Tom Bruhl" <<A=20
>>>> href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=20
>>>> wrote:<BR>><BR>><BR>>Hey Rod,<BR>>That sounds =
>>>>promising. =20
>>>> What cards do you have the<BR>>Mecs and 442 connected=20
>>>> to?<BR>>Tom<BR>><BR>><BR>> "Rod Lincoln" <<A=20
>>>> =
>>>>href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&g=
>>>>t;=20
>>>> wrote in message =
>>>>=3D<BR>>news:46451438$1@linux...<BR>><BR>> I've=20
>>>> got 2 mecs and a 442 working here, no problems at all.<BR>> =
>>>>I'm also=20
>>>> clocking with the old Lucid genX word clock. 5 modules in=20
>>>> one<BR>=3D<BR>>mec,<BR>> 4 modules in the other. 1 adat =
>>>>card each. 6=20
>>>> eds cards, 3 UAD cards, =3D<BR>>all in<BR>> a magma. Oh =
>>>>yeah, a Lynx=20
>>>> one in the computer also.<BR>> Rod<BR>> "Tom Bruhl" =
>>>><<A=20
>>>> href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=20
>>>> wrote:<BR>> ><BR>> ><BR>> >I'll be =
>>>>buying=20
>>>> either two MECs or two 442s but don't want it<BR>> >to =
>>>>mess my=20
>>>> whole rig up if the 442s don't play nice.<BR>> >I am using =
>>>>an=20
>>>> older Lucid clock now with 2 Mecs already.<BR>> >They each =
>>>>have=20
>>>> five modules in them. The others may<BR>> >see a =
>>>>single ADAT=20
>>>> at most someday maybe.<BR>> ><BR>> >I can make =
>>>>the=20
>>>> MECs fit in the machine room with the others<BR>> >but the =
>>>>442s=20
>>>> would be a lot easier.<BR>> ><BR>> >Anyone =
>>>>know=20
>>>> Deej?<BR>> ><BR>> >Also I have to find the pin =
>>>>config=20
>>>> for a 56 pin EDAC/ELCO ADAT<BR>> >connector. I want =
>>>>to chop=20
>>>> this bad boy off and solder 16 TRS<BR>> >to it. =
>>>>Anyone know=20
>>>> whether the ADAT wiring is different than<BR>> =20
>>>> >standard?<BR>> >Thanks,<BR>> =
>>>>>Tom<BR>> =20
>>>> ><BR>> ><BR>> ><BR>> =
>>>>><BR>> =20
>>>> >I choose Polesoft Lockspam to fight spam, and you?<BR>> =20
>>>> >http://www.polesoft.com/refer.html =3D20<BR>> =20
>>>> ><BR>> ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0=20
>>>> Transitional//EN"><BR>> =
>>>>><HTML><HEAD><BR>> =20
>>>> ><META http-equiv=3D3D3DContent-Type content=3D3D3D"text/html;=20
>>>> =3D3D<BR>> >charset=3D3D3Diso-8859-1"><BR>> =
>>>>><META=20
>>>> content=3D3D3D"MSHTML 6.00.2800.1400" =
>>>>name=3D3D3DGENERATOR><BR>> =20
>>>> ><STYLE></STYLE><BR>> =
>>>>></HEAD><BR>> =20
>>>> ><BODY bgColor=3D3D3D#ffffff><BR>> =
>>>>><DIV><FONT=20
>>>> face=3D3D3DArial size=3D3D3D2>I'll be buying either two MECs =
>>>>=3D<BR>>or two=20
>>>> =3D3D<BR>> >442s but=3D3D20<BR>> >don't want=20
>>>> it</FONT></DIV><BR>> ><DIV><FONT=20
>>>> face=3D3D3DArial size=3D3D3D2>to mess my whole rig up if the =
>>>>=3D<BR>>442s=20
>>>> =3D3D<BR>> >don't play=3D3D20<BR>> =20
>>>> >nice.</FONT></DIV><BR>> =
>>>>><DIV><FONT=20
>>>> face=3D3D3DArial size=3D3D3D2>I am using an older Lucid =
>>>>clock<BR>=3D<BR>>now=20
>>>> =3D3D<BR>> >with 2 Mecs=3D3D20<BR>> =20
>>>> >already.</FONT></DIV><BR>> =
>>>>><DIV><FONT=20
>>>> face=3D3D3DArial size=3D3D3D2>They each have five modules in=20
>>>> =3D<BR>>=3D3D<BR>> >them. The=3D3D20<BR>> =
>>>>>others=20
>>>> may</FONT></DIV><BR>> ><DIV><FONT=20
>>>> face=3D3D3DArial size=3D3D3D2>see a single ADAT at most=20
>>>> =3D<BR>>someday=3D3D20<BR>> =20
>>>> >maybe.</FONT></DIV><BR>> =
>>>>><DIV><FONT=20
>>>> face=3D3D3DArial size=3D3D3D2></FONT> =
>>>></DIV><BR>> =20
>>>> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>I can make =
>>>>the MECs fit=20
>>>> in the =3D<BR>>machine<BR>> =3D3D<BR>> >room=20
>>>> with=3D3D20<BR>> >the =
>>>>others</FONT></DIV><BR>> =20
>>>> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>but the 442s =
>>>>would be=20
>>>> =3D<BR>></FONT><FONT =3D3D<BR>> =20
>>>> >face=3D3D3DArial=3D3D20<BR>> >size=3D3D3D2>a lot=20
>>>> easier.</FONT></DIV><BR>> ><DIV><FONT =
>>>>
>>>> face=3D3D3DArial size=3D3D3D2></FONT> =
>>>></DIV><BR>> =20
>>>> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Anyone know=20
>>>> Deej?</FONT></DIV><BR>> ><DIV><FONT=20
>>>> face=3D3D3DArial size=3D3D3D2></FONT> =
>>>></DIV><BR>> =20
>>>> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Also I have =
>>>>to find the=20
>>>> pin =3D<BR>>config for<BR>> =3D3D<BR>> >a 56=20
>>>> pin=3D3D20<BR>> >EDAC/ELCO=20
>>>> ADAT</FONT></DIV><BR>> ><DIV><FONT=20
>>>> face=3D3D3DArial size=3D3D3D2>connector. I want to chop this=20
>>>> =3D<BR>>=3D3D<BR>> >bad boy off=3D3D20<BR>> =
>>>>>and solder=20
>>>> 16 TRS</FONT></DIV><BR>> ><DIV><FONT=20
>>>> face=3D3D3DArial size=3D3D3D2>to it. Anyone know whether the=20
>>>> =3D<BR>>=3D3D<BR>> >ADAT wiring is=3D3D20<BR>> =
>>>>>different=20
>>>> than</FONT></DIV><BR>> ><DIV><FONT=20
>>>> face=3D3D3DArial =
>>>>size=3D3D3D2>standard?</FONT></DIV><BR>> =20
>>>> ><DIV><FONT face=3D3D3DArial=20
>>>> size=3D3D3D2>Thanks,</FONT></DIV><BR>> =20
>>>> ><DIV><FONT face=3D3D3DArial=20
>>>> size=3D3D3D2>Tom</FONT></DIV><BR>> =20
>>>> ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> =
>>>>
>>>> </DIV><BR>> ><DIV><FONT face=3D3D3DArial=20
>>>> size=3D3D3D2></FONT> </DIV><BR>> =
>>>>><DIV><FONT=20
>>>> size=3D3D3D2><BR><BR>I choose Polesoft Lockspam to =
>>>>fight=20
>>>> =3D<BR>>spam, =3D3D<BR>> >and=3D3D20<BR>> =20
>>>> >you?<BR><A=3D3D20<BR>> =
>>>>=3D<BR>>>href=3D3D3D"<A=20
>>>> =
>>>>href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/re'>h=
>>>>ttp://www.polesoft.com/refer.html">http://www.polesoft.com/re</A>=3D<B=
>>>>R>>fer=3D3D<BR>> =20
>>>> >.html</A>=20
>>>> </FONT></DIV></BODY></HTML><BR>> =20
>>>> ><BR>> ><BR>><BR>><BR>><!DOCTYPE HTML =
>>>>PUBLIC=20
>>>> "-//W3C//DTD HTML 4.0=20
>>>> Transitional//EN"><BR>><HTML><HEAD><BR>><META=20
>>>> http-equiv=3D3DContent-Type content=3D3D"text/html;=20
>>>> =3D<BR>>charset=3D3Diso-8859-1"><BR>><META =
>>>>content=3D3D"MSHTML=20
>>>> 6.00.2800.1400"=20
>>>> =
>>>>name=3D3DGENERATOR><BR>><STYLE></STYLE><BR>></HEA=
>>>>D><BR>><BODY=20
>>>> bgColor=3D3D#ffffff><BR>><DIV><FONT face=3D3DArial =
>>>>size=3D3D2>Hey=20
>>>> Rod,</FONT></DIV><BR>><DIV><FONT =
>>>>face=3D3DArial=20
>>>> size=3D3D2>That sounds promising. What cards =3D<BR>>do you=20
>>>> =
>>>>have=3D20<BR>>the</FONT></DIV><BR>><DIV><FONT =
>>>>
>>>> face=3D3DArial size=3D3D2>Mecs and 442 connected=20
>>>> to?</FONT></DIV><BR>><DIV><FONT face=3D3DArial =
>>>>
>>>> size=3D3D2>Tom</FONT></DIV><BR>><DIV><FONT=20
>>>> face=3D3DArial size=3D3D2></FONT> =
>>>></DIV><BR>><DIV>=20
>>>> =
>>>></DIV><BR>><BLOCKQUOTE=3D20<BR>>style=3D3D"PADDING-RIGHT: =
>>>>0px;=20
>>>> PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =3D<BR>>BORDER-LEFT: #000000 =
>>>>2px solid;=20
>>>> MARGIN-RIGHT: 0px"><BR>> <DIV>"Rod Lincoln"=20
>>>> <<A=3D20<BR>> =3D<BR>>href=3D3D"<A=20
>>>> =
>>>>href=3D'mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&a=
>>>>mp;g'>mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</=
>>>>A>&g</A>=3D<BR>>t;=3D20<BR>> =20
>>>> wrote in message <A=3D20<BR>> =3D<BR>>href=3D3D"<A=20
>>>> =
>>>>href=3D"news:46451438$1@linux">news:46451438$1@linux</A>...</DIV><BR=
>>>>>I've">news:46451438$1@linux">news:46451438$1@linux</A>...</D=
>>>>IV><BR>I've</A>=3D<BR>>=20
>>>> got 2=3D20<BR>> mecs and a 442 working here, no problems at=20
>>>> all.<BR>I'm also clocking<BR>=3D<BR>>with =
>>>>the=3D20<BR>> old=20
>>>> Lucid genX word clock. 5 modules in one mec,<BR>4 modules in the =
>>>>
>>>> =3D<BR>>other. 1=3D20<BR>> adat card each. 6 eds cards, 3 =
>>>>UAD cards,=20
>>>> all in<BR>a magma. Oh yeah,<BR>=3D<BR>>a =
>>>>Lynx=3D20<BR>> one in=20
>>>> the computer also.<BR>Rod<BR>"Tom Bruhl"=20
>>>> <<A=3D20<BR>> href=3D3D"<A=20
>>>> =
>>>>href=3D'mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20'>mailto=
>>>>:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20</A><BR>&g=
>>>>t; =20
>>>> wrote:<BR>><BR>><BR>>I'll be buying either =
>>>>two MECs=20
>>>> or two =3D<BR>>442s but=3D20<BR>> don't want =
>>>>it<BR>>to mess=20
>>>> my whole rig up if the 442s don't play=3D20<BR>> =
>>>>nice.<BR>>I=20
>>>> am using an older Lucid clock now with 2 Mecs=3D20<BR>> =20
>>>> already.<BR>>They each have five modules in them. The=20
>>>> others=3D20<BR>> may<BR>>see a single ADAT at most =
>>>>someday=20
>>>> maybe.<BR>><BR>>I =3D<BR>>can =
>>>>make=3D20<BR>> the=20
>>>> MECs fit in the machine room with the others<BR>>but the 442s =
>>>>
>>>> =3D<BR>>would be=3D20<BR>> a lot=20
>>>> easier.<BR>><BR>>Anyone know=20
>>>> Deej?<BR>><BR>>Also I =3D<BR>>have =
>>>>to=3D20<BR>> find=20
>>>> the pin config for a 56 pin EDAC/ELCO =
>>>>=3D<BR>>ADAT<BR>>connector. I=20
>>>> want=3D20<BR>> to chop this bad boy off and solder 16=20
>>>> TRS<BR>>to it. Anyone =3D<BR>>know=3D20<BR>> =
>>>>whether the ADAT=20
>>>> wiring is different=3D20<BR>> =20
>>>> =
>>>>=3D<BR>>than<BR>>standard?<BR>>Thanks,<BR>>=
>>>>Tom<BR>><BR>><BR>><B=3D<BR>>R>><=
>>>>;BR>>I=3D20<BR>> =20
>>>> choose Polesoft Lockspam to fight spam, and=3D20<BR>> =20
>>>> you?<BR>>http://www.polesoft.com/refer.html =
>>>>=3D20<BR>> =20
>>>> <BR>><BR>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML =
>>>>
>>>> 4.0=3D20<BR>> =20
>>>> =
>>>>Transitional//EN"><BR>><HTML><HEAD><BR>>=
>>>><META=3D20<BR>> =20
>>>> http-equiv=3D3D3DContent-Type =
>>>>content=3D3D3D"text/html;=3D20<BR>> =20
>>>> =3D3D<BR>>charset=3D3D3Diso-8859-1"><BR>><META =
>>>>
>>>> =3D<BR>>content=3D3D3D"MSHTML=3D20<BR>> =
>>>>6.00.2800.1400"=3D20<BR>> =20
>>>> =
>>>>=3D<BR>>name=3D3D3DGENERATOR><BR>><STYLE></STYLE&=
>>>>gt;<BR>></HEA=3D<BR>>D><BR>><BODY=3D20<BR>&=
>>>>gt; =20
>>>> bgColor=3D3D3D#ffffff><BR>><DIV><FONT =
>>>>face=3D3D3DArial=20
>>>> =3D<BR>>size=3D3D3D2>I'll=3D20<BR>> be buying either =
>>>>two MECs or two=20
>>>> =3D3D<BR>>442s but=3D3D20<BR>>don't=20
>>>> =3D<BR>>want=3D20<BR>> =20
>>>> it</FONT></DIV><BR>><DIV><FONT=20
>>>> face=3D3D3DArial=3D20<BR>> size=3D3D3D2>to mess my whole =
>>>>rig up if the=20
>>>> 442s =3D3D<BR>>don't=3D20<BR>> =20
>>>> =
>>>>=3D<BR>>play=3D3D20<BR>>nice.</FONT></DIV><BR&=
>>>>gt;><DIV><FON=3D<BR>>T=3D20<BR>> =20
>>>> face=3D3D3DArial size=3D3D3D2>I am using an older Lucid clock now=20
>>>> =3D<BR>>=3D3D<BR>>with 2=3D20<BR>> =20
>>>> =
>>>>
>>> =3D<BR>>Mecs=3D3D20<BR>>already.</FONT></DIV><=
>>>>BR>><DIV><=3D<BR>>FONT=3D20<BR>> =20
>>>> face=3D3D3DArial size=3D3D3D2>They each have five modules in=20
>>>> =3D<BR>>=3D3D<BR>>them.=3D20<BR>> =
>>>>The=3D3D20<BR>>others=20
>>>> =
>>>>=3D<BR>>may</FONT></DIV><BR>><DIV><FONT=3D=
>>>>20<BR>> =20
>>>> face=3D3D3DArial size=3D3D3D2>see a single ADAT at =
>>>>most=3D20<BR>> =20
>>>> =
>>>>=3D<BR>>someday=3D3D20<BR>>maybe.</FONT></DIV><=
>>>>;BR>><DIV><=3D<BR>>;FONT=3D20<BR>> =20
>>>> face=3D3D3DArial size=3D3D3D2></FONT>=20
>>>> =
>>>>=3D<BR>></DIV><BR>><DIV><FONT=3D20<BR>>&nbs=
>>>>p;=20
>>>> face=3D3D3DArial size=3D3D3D2>I can make the MECs fit in =
>>>>the=3D20<BR>> =20
>>>> machine<BR>=3D3D<BR>>room=20
>>>> with=3D3D20<BR>>the=3D20<BR>> =20
>>>> others</FONT></DIV><BR>><DIV><FONT=20
>>>> =3D<BR>>face=3D3D3DArial=3D20<BR>> size=3D3D3D2>but the =
>>>>442s would be=20
>>>> </FONT><FONT=3D20<BR>> =20
>>>> =
>>>>=3D3D<BR>>face=3D3D3DArial=3D3D20<BR>>size=3D3D3D2>a=
>>>>=20
>>>> lot=3D20<BR>> =20
>>>> easier.</FONT></DIV><BR>><DIV><FONT=20
>>>> =3D<BR>>face=3D3D3DArial=3D20<BR>> =
>>>>size=3D3D3D2></FONT>=20
>>>> </DIV><BR>><DIV><FONT=20
>>>> =3D<BR>>face=3D3D3DArial=3D20<BR>> size=3D3D3D2>Anyone=20
>>>> know=3D20<BR>> =20
>>>> Deej?</FONT></DIV><BR>><DIV><FONT=20
>>>> =3D<BR>>face=3D3D3DArial=3D20<BR>> =
>>>>size=3D3D3D2></FONT>=20
>>>> </DIV><BR>><DIV><FONT=20
>>>> =3D<BR>>face=3D3D3DArial=3D20<BR>> size=3D3D3D2>Also I =
>>>>have to find the=20
>>>> pin config for<BR>=3D3D<BR>>a =
>>>>=3D<BR>>56=3D20<BR>> =20
>>>> pin=3D3D20<BR>>EDAC/ELCO=3D20<BR>> =20
>>>> ADAT</FONT></DIV><BR>><DIV><FONT=20
>>>> =3D<BR>>face=3D3D3DArial=3D20<BR>> =
>>>>size=3D3D3D2>connector. I want to=20
>>>> chop this =3D3D<BR>>bad boy=20
>>>> =3D<BR>>off=3D3D20<BR>>and=3D20<BR>> solder 16=20
>>>> TRS</FONT></DIV><BR>><DIV><FONT=20
>>>> =3D<BR>>face=3D3D3DArial=3D20<BR>> size=3D3D3D2>to it. =
>>>>Anyone know=20
>>>> whether the =3D3D<BR>>ADAT wiring=3D20<BR>> =20
>>>> is=3D3D20<BR>>different=3D20<BR>> =20
>>>> than</FONT></DIV><BR>><DIV><FONT=20
>>>> =3D<BR>>face=3D3D3DArial=3D20<BR>> =20
>>>> =
>>>>=3D<BR>>size=3D3D3D2>standard?</FONT></DIV><BR>&g=
>>>>t;<DIV><FO=3D<BR>>NT=3D20<BR>> =20
>>>> face=3D3D3DArial=3D20<BR>> =20
>>>> =
>>>>=3D<BR>>size=3D3D3D2>Thanks,</FONT></DIV><BR>>=
>>>><DIV><FONT=3D<BR>>=3D20<BR>> =20
>>>> face=3D3D3DArial=3D20<BR>> =20
>>>> =
>>>>size=3D3D3D2>Tom</FONT></DIV><BR>><DIV><=
>>>>FONT=3D20<BR>> =20
>>>> face=3D3D3DArial size=3D3D3D2></FONT>=20
>>>> =
>>>>=3D<BR>></DIV><BR>><DIV><FONT=3D20<BR>>&nbs=
>>>>p;=20
>>>> face=3D3D3DArial size=3D3D3D2></FONT>=20
>>>> =
>>>>=3D<BR>></DIV><BR>><DIV><FONT=3D20<BR>>&nbs=
>>>>p;=20
>>>> size=3D3D3D2><BR><BR>I choose Polesoft Lockspam to =
>>>>fight=20
>>>> =3D<BR>>spam,=3D20<BR>> =20
>>>> =
>>>>=3D<BR>>=3D3D<BR>>and=3D3D20<BR>>you?<BR><A=
>>>>=3D3D20<BR>>href=3D3D3D"<A=3D20<BR>> =20
>>>> =
>>>>=3D<BR>>href=3D3D'http://www.polesoft.com/refer.html">http://www.po=
>>>>lesoft.com/refer=3D<BR>>'>http://www.polesoft.com/refer.html">ht=
>>>>tp://www.polesoft.com/refer</A=3D<BR>>>=3D3D<BR>>.html&=
>>>>lt;/A>=3D20<BR>> =20
>>>> =
>>>>=3D<BR>></FONT></DIV></BODY></HTML><BR>&=
>>>>gt;<BR>><BR></=3D<BR>>BLOCKQUOTE></BODY><=
>>>>;/HTML><BR>><BR>><BR></BLOCKQUOTE></BODY></HTML>
>>>>
>>>>
>>>
>>
>>
>
|
|
|
|
| Re: Paris 3.0/XP MECs and 442s work nicely or no? Also Elco pin out. . . [message #84412 is a reply to message #84410] |
Sat, 12 May 2007 14:20 |
Tom Bruhl
Messages: 1368
Registered: June 2007
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_0013_01C794B9.CDE36180
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
DJ,
Rod says his two Mecs have 4 and 5 modules each.
I think it's hit or miss. I also wonder if it has to do with
reinstalling Paris with all the hardware present the first
go. I don't know for sure. =20
I'll bet Chris has more than a morsel of info about how to get it
to work. He's been successful many times in the past.
Tom
"DJ" <www.aarrrrggghhh!!!.com> wrote in message news:46462ad8@linux...
Hmmmm...........maybe so. ;o) How many/what kind of I/O modules do you =
have=20
in the MEC that is on Card A?
"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message=20
news:46462845$1@linux...
>
> My 442 works reliably off the B card. maybe DJ slapped some sense =
into it.
> ;-)
> Rod
> "DJ" <www.aarrrrggghhh!!!.com> wrote:
>>IIRC 442's are initialized differently from the MEC and need to be =
hung
> off
>>Card A to work reliablein a multi interface setup. this will =
necessitate
>
>>using the 20 bit I/O for monitoring the mix.
>>
>>"Dimitrios" <musurgio@otenet.gr> wrote in message =
news:46456534$1@linux...
>>>
>>> Hi Tom,
>>> When I tried this 442 and mec combination I only found a working =
clocked
>>> system if 442 was a master so 20 bits versus 24 was inportant to =
me for
>
>>> monitoring
>>> ! (I still record only 16 bits !).
>>> What though was evident is that I could NEVER have the ins and =
outs of
> 442
>>> working correctly.
>>> You know sometimes we use 442 along mec and we mostly don't use =
much of
>
>>> 442
>>> except for a spdif or something.
>>> It would be nice if someone could CHECK that in a multi mec 442 =
system
> ALL
>>> 442's ins and outs along with mec's are working correctly.
>>> I know this is much to ask but Tom (and I at least) would love =
that kind
>>> of testing info.
>>> A 442 would be a great addition to me IF mec could be main card A =
and
> all
>>> ins and outs of everything would work.
>>> Is this an XP problem or is it the same as in win98 or Me ?
>>> Regards,
>>> Dimitrios
>>>
>>> "Tom Bruhl" <arpegio@comcast.net> wrote:
>>>>
>>>>
>>>>What do you guys think,
>>>>What are my chances of getting two 442s in the mix
>>>>without my Mecs losing some of their cards?
>>>>T.
>>>>
>>>> "Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message =3D
>>>>news:46453f51$1@linux...
>>>>
>>>> Mec 1 on card A, 442 on Card B, Mec 2 on Card F (my last card)
>>>> I'm running spdif out of Mec 1 to a DAC 1
>>>> Rod
>>>> "Tom Bruhl" <arpegio@comcast.net> wrote:
>>>> >
>>>> >
>>>> >Hey Rod,
>>>> >That sounds promising. What cards do you have the
>>>> >Mecs and 442 connected to?
>>>> >Tom
>>>> >
>>>> >
>>>> > "Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message =
=3D3D
>>>> >news:46451438$1@linux...
>>>> >
>>>> > I've got 2 mecs and a 442 working here, no problems at all.
>>>> > I'm also clocking with the old Lucid genX word clock. 5 =
modules in
>>> =3D
>>>>one
>>>> =3D3D
>>>> >mec,
>>>> > 4 modules in the other. 1 adat card each. 6 eds cards, 3 UAD =
cards,
>>> =3D
>>>>=3D3D
>>>> >all in
>>>> > a magma. Oh yeah, a Lynx one in the computer also.
>>>> > Rod
>>>> > "Tom Bruhl" <arpegio@comcast.net> wrote:
>>>> > >
>>>> > >
>>>> > >I'll be buying either two MECs or two 442s but don't want it
>>>> > >to mess my whole rig up if the 442s don't play nice.
>>>> > >I am using an older Lucid clock now with 2 Mecs already.
>>>> > >They each have five modules in them. The others may
>>>> > >see a single ADAT at most someday maybe.
>>>> > >
>>>> > >I can make the MECs fit in the machine room with the others
>>>> > >but the 442s would be a lot easier.
>>>> > >
>>>> > >Anyone know Deej?
>>>> > >
>>>> > >Also I have to find the pin config for a 56 pin EDAC/ELCO =
ADAT
>>>> > >connector. I want to chop this bad boy off and solder 16 =
TRS
>>>> > >to it. Anyone know whether the ADAT wiring is different =
than
>>>> > >standard?
>>>> > >Thanks,
>>>> > >Tom
>>>> > >
>>>> > >
>>>> > >
>>>> > >
>>>> > >I choose Polesoft Lockspam to fight spam, and you?
>>>> > >http://www.polesoft.com/refer.html =3D3D20
>>>> > >
>>>> > ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 =
Transitional//EN">
>>>> > ><HTML><HEAD>
>>>> > ><META http-equiv=3D3D3D3DContent-Type =
content=3D3D3D3D"text/html; =3D
>>>>=3D3D3D
>>>> > >charset=3D3D3D3Diso-8859-1">
>>>> > ><META content=3D3D3D3D"MSHTML 6.00.2800.1400" =
name=3D3D3D3DGENERATOR>
>>>> > ><STYLE></STYLE>
>>>> > ></HEAD>
>>>> > ><BODY bgColor=3D3D3D3D#ffffff>
>>>> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>I'll be buying =
either two
>>> =3D
>>>>MECs =3D3D
>>>> >or two =3D3D3D
>>>> > >442s but=3D3D3D20
>>>> > >don't want it</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>to mess my =
whole rig up
> =3D
>>>>if the =3D3D
>>>> >442s =3D3D3D
>>>> > >don't play=3D3D3D20
>>>> > >nice.</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>I am using an =
older Lucid
>>> =3D
>>>>clock
>>>> =3D3D
>>>> >now =3D3D3D
>>>> > >with 2 Mecs=3D3D3D20
>>>> > >already.</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>They each have =
five =3D
>>>>modules in =3D3D
>>>> >=3D3D3D
>>>> > >them. The=3D3D3D20
>>>> > >others may</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>see a single =
ADAT at most
>>> =3D
>>>>=3D3D
>>>> >someday=3D3D3D20
>>>> > >maybe.</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2></FONT> </DIV>
>>>> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>I can make the =
MECs fit
> =3D
>>>>in the =3D3D
>>>> >machine
>>>> > =3D3D3D
>>>> > >room with=3D3D3D20
>>>> > >the others</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>but the 442s =
would be =3D3D
>>>> ></FONT><FONT =3D3D3D
>>>> > >face=3D3D3D3DArial=3D3D3D20
>>>> > >size=3D3D3D3D2>a lot easier.</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2></FONT> </DIV>
>>>> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>Anyone know =3D
>>>>Deej?</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2></FONT> </DIV>
>>>> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>Also I have to =
find the
> =3D
>>>>pin =3D3D
>>>> >config for
>>>> > =3D3D3D
>>>> > >a 56 pin=3D3D3D20
>>>> > >EDAC/ELCO ADAT</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>connector. I =
want to chop
>>> =3D
>>>>this =3D3D
>>>> >=3D3D3D
>>>> > >bad boy off=3D3D3D20
>>>> > >and solder 16 TRS</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>to it. Anyone =
know =3D
>>>>whether the =3D3D
>>>> >=3D3D3D
>>>> > >ADAT wiring is=3D3D3D20
>>>> > >different than</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3D3DArial =
size=3D3D3D3D2>standard?</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3D3DArial =
size=3D3D3D3D2>Thanks,</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3D3DArial =
size=3D3D3D3D2>Tom</FONT></DIV>
>>>> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2></FONT> </DIV>
>>>> > ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2></FONT> </DIV>
>>>> > ><DIV><FONT size=3D3D3D3D2><BR><BR>I choose Polesoft Lockspam =
to =3D
>>>>fight =3D3D
>>>> >spam, =3D3D3D
>>>> > >and=3D3D3D20
>>>> > >you?<BR><A=3D3D3D20
>>>> > =3D3D
>>>> =3D
=
>>>>>>href=3D3D3D3D"http://www.polesoft.com/refer.html">http://www.poleso=
ft.com=3D
>>>>/re=3D3D
>>>> >fer=3D3D3D
>>>> > >.html</A> </FONT></DIV></BODY></HTML>
>>>> > >
>>>> > >
>>>> >
>>>> >
>>>> ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
>>>> ><HTML><HEAD>
>>>> ><META http-equiv=3D3D3DContent-Type content=3D3D3D"text/html; =
=3D3D
>>>> >charset=3D3D3Diso-8859-1">
>>>> ><META content=3D3D3D"MSHTML 6.00.2800.1400" =
name=3D3D3DGENERATOR>
>>>> ><STYLE></STYLE>
>>>> ></HEAD>
>>>> ><BODY bgColor=3D3D3D#ffffff>
>>>> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Hey Rod,</FONT></DIV>
>>>> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>That sounds promising. =
What =3D
>>>>cards =3D3D
>>>> >do you have=3D3D20
>>>> >the</FONT></DIV>
>>>> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Mecs and 442 connected =
=3D
>>>>to?</FONT></DIV>
>>>> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Tom</FONT></DIV>
>>>> ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
>>>> ><DIV> </DIV>
>>>> ><BLOCKQUOTE=3D3D20
>>>> >style=3D3D3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; =
MARGIN-LEFT: 5px;
> =3D
>>>>=3D3D
>>>> >BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
>>>> > <DIV>"Rod Lincoln" <<A=3D3D20
>>>> > =3D3D
>>>> =3D
=
>>>>>href=3D3D3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.=
com</A=3D
>>>>>&g=3D3D
>>>> >t;=3D3D20
>>>> > wrote in message <A=3D3D20
>>>> > =3D3D
>>>> =3D
=
>>>>>href=3D3D3D"news:46451438$1@linux">news:46451438$1@linux</A>...</DIV=
><BR>I=3D
>>>>'ve=3D3D
>>>> > got 2=3D3D20
>>>> > mecs and a 442 working here, no problems at all.<BR>I'm also =
=3D
>>>>clocking
>>>> =3D3D
>>>> >with the=3D3D20
>>>> > old Lucid genX word clock. 5 modules in one mec,<BR>4 modules =
in
> =3D
>>>>the =3D3D
>>>> >other. 1=3D3D20
>>>> > adat card each. 6 eds cards, 3 UAD cards, all in<BR>a magma. =
Oh =3D
>>>>yeah,
>>>> =3D3D
>>>> >a Lynx=3D3D20
>>>> > one in the computer also.<BR>Rod<BR>"Tom Bruhl" <<A=3D3D20
>>>> > =
href=3D3D3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D3D20
>>>> > wrote:<BR>><BR>><BR>>I'll be buying either two MECs or two =
=3D3D
>>>> >442s but=3D3D20
>>>> > don't want it<BR>>to mess my whole rig up if the 442s don't =
=3D
>>>>play=3D3D20
>>>> > nice.<BR>>I am using an older Lucid clock now with 2 =
Mecs=3D3D20
>>>> > already.<BR>>They each have five modules in them. The =
others=3D3D20
>>>> > may<BR>>see a single ADAT at most someday maybe.<BR>><BR>>I =
=3D3D
>>>> >can make=3D3D20
>>>> > the MECs fit in the machine room with the others<BR>>but the =
442s
> =3D
>>>>=3D3D
>>>> >would be=3D3D20
>>>> > a lot easier.<BR>><BR>>Anyone know Deej?<BR>><BR>>Also I =
=3D3D
>>>> >have to=3D3D20
>>>> > find the pin config for a 56 pin EDAC/ELCO =3D3D
>>>> >ADAT<BR>>connector. I want=3D3D20
>>>> > to chop this bad boy off and solder 16 TRS<BR>>to it. Anyone =
=3D3D
>>>> >know=3D3D20
>>>> > whether the ADAT wiring is different=3D3D20
>>>> > =3D3D
>>>> >than<BR>>standard?<BR>>Thanks,<BR>>Tom<BR>><BR>><BR >><B=3D3D
>>>> >R>><BR>>I=3D3D20
>>>> > choose Polesoft Lockspam to fight spam, and=3D3D20
>>>> > you?<BR>>http://www.polesoft.com/refer.html =3D3D20
>>>> > <BR>><BR>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0=3D3D20
>>>> > Transitional//EN"><BR>><HTML><HEAD><BR>><META=3D3D20
>>>> > http-equiv=3D3D3D3DContent-Type =
content=3D3D3D3D"text/html;=3D3D20
>>>> > =3D3D3D<BR>>charset=3D3D3D3Diso-8859-1"><BR>><META =3D3D
>>>> >content=3D3D3D3D"MSHTML=3D3D20
>>>> > 6.00.2800.1400"=3D3D20
>>>> > =3D3D
>>>> >name=3D3D3D3DGENERATOR><BR>><STYLE></STYLE><BR>></HEA=3D3D
>>>> >D><BR>><BODY=3D3D20
>>>> > bgColor=3D3D3D3D#ffffff><BR>><DIV><FONT face=3D3D3D3DArial =
=3D3D
>>>> >size=3D3D3D3D2>I'll=3D3D20
>>>> > be buying either two MECs or two =3D3D3D<BR>>442s =3D
>>>>but=3D3D3D20<BR>>don't =3D3D
>>>> >want=3D3D20
>>>> > it</FONT></DIV><BR>><DIV><FONT face=3D3D3D3DArial=3D3D20
>>>> > size=3D3D3D3D2>to mess my whole rig up if the 442s =3D
>>>>=3D3D3D<BR>>don't=3D3D20
>>>> > =3D3D
>>>> >play=3D3D3D20<BR>>nice.</FONT></DIV><BR>><DIV><FON=3D3D
>>>> >T=3D3D20
>>>> > face=3D3D3D3DArial size=3D3D3D3D2>I am using an older Lucid =
clock now
> =3D
>>>>=3D3D
>>>> >=3D3D3D<BR>>with 2=3D3D20
>>>> > =3D3D
>>>> >Mecs=3D3D3D20<BR>>already.</FONT></DIV><BR>><DIV><=3D3D
>>>> >FONT=3D3D20
>>>> > face=3D3D3D3DArial size=3D3D3D3D2>They each have five modules =
in =3D3D
>>>> >=3D3D3D<BR>>them.=3D3D20
>>>> > The=3D3D3D20<BR>>others =3D3D
>>>> >may</FONT></DIV><BR>><DIV><FONT=3D3D20
>>>> > face=3D3D3D3DArial size=3D3D3D3D2>see a single ADAT at =
most=3D3D20
>>>> > =3D3D
>>>> >someday=3D3D3D20<BR>>maybe.</FONT></DIV><BR>><DIV><=3D3D
>>>> >;FONT=3D3D20
>>>> > face=3D3D3D3DArial size=3D3D3D3D2></FONT> =3D3D
>>>> ></DIV><BR>><DIV><FONT=3D3D20
>>>> > face=3D3D3D3DArial size=3D3D3D3D2>I can make the MECs fit in =
the=3D3D20
>>>> > machine<BR>=3D3D3D<BR>>room with=3D3D3D20<BR>>the=3D3D20
>>>> > others</FONT></DIV><BR>><DIV><FONT =3D3D
>>>> >face=3D3D3D3DArial=3D3D20
>>>> > size=3D3D3D3D2>but the 442s would be </FONT><FONT=3D3D20
>>>> > =3D3D3D<BR>>face=3D3D3D3DArial=3D3D3D20<BR>>size=3D3D3D3D2 >a =
lot=3D3D20
>>>> > easier.</FONT></DIV><BR>><DIV><FONT =3D3D
>>>> >face=3D3D3D3DArial=3D3D20
>>>> > size=3D3D3D3D2></FONT> </DIV><BR>><DIV><FONT =3D3D
>>>> >face=3D3D3D3DArial=3D3D20
>>>> > size=3D3D3D3D2>Anyone know=3D3D20
>>>> > Deej?</FONT></DIV><BR>><DIV><FONT =3D3D
>>>> >face=3D3D3D3DArial=3D3D20
>>>> > size=3D3D3D3D2></FONT> </DIV><BR>><DIV><FONT =3D3D
>>>> >face=3D3D3D3DArial=3D3D20
>>>> > size=3D3D3D3D2>Also I have to find the pin config =
for<BR>=3D3D3D<BR>>a
>>> =3D
>>>>=3D3D
>>>> >56=3D3D20
>>>> > pin=3D3D3D20<BR>>EDAC/ELCO=3D3D20
>>>> > ADAT</FONT></DIV><BR>><DIV><FONT =3D3D
>>>> >face=3D3D3D3DArial=3D3D20
>>>> > size=3D3D3D3D2>connector. I want to chop this =3D3D3D<BR>>bad =
boy =3D3D
>>>> >off=3D3D3D20<BR>>and=3D3D20
>>>> > solder 16 TRS</FONT></DIV><BR>><DIV><FONT =3D3D
>>>> >face=3D3D3D3DArial=3D3D20
>>>> > size=3D3D3D3D2>to it. Anyone know whether the =
=3D3D3D<BR>>ADAT =3D
>>>>wiring=3D3D20
>>>> > is=3D3D3D20<BR>>different=3D3D20
>>>> > than</FONT></DIV><BR>><DIV><FONT =3D3D
>>>> >face=3D3D3D3DArial=3D3D20
>>>> > =3D3D
>>>> >size=3D3D3D3D2>standard?</FONT></DIV><BR>><DIV><FO=3D3D
>>>> >NT=3D3D20
>>>> > face=3D3D3D3DArial=3D3D20
>>>> > =3D3D
>>>> >size=3D3D3D3D2>Thanks,</FONT></DIV><BR>><DIV><FONT=3D3D
>>>> >=3D3D20
>>>> > face=3D3D3D3DArial=3D3D20
>>>> > size=3D3D3D3D2>Tom</FONT></DIV><BR>><DIV><FONT=3D3D20
>>>> > face=3D3D3D3DArial size=3D3D3D3D2></FONT> =3D3D
>>>> ></DIV><BR>><DIV><FONT=3D3D20
>>>> > face=3D3D3D3DArial size=3D3D3D3D2></FONT> =3D3D
>>>> ></DIV><BR>><DIV><FONT=3D3D20
>>>> > size=3D3D3D3D2><BR><BR>I choose Polesoft Lockspam to fight =
=3D3D
>>>> >spam,=3D3D20
>>>> > =3D3D
>>>> =
>=3D3D3D<BR>>and=3D3D3D20<BR>>you?<BR><A=3D3D3D20<BR> >href=3D3D3D3D"<A=3D=
3D20
>>>> > =3D3D
>>>> =3D
=
>>>>>href=3D3D3D'http://www.polesoft.com/refer.html">http://www.polesoft.=
com/re=3D
>>>>fer=3D3D
>>>> =3D
=
>>>>>'>http://www.polesoft.com/refer.html">http://www.polesoft.com/refer<=
/A=3D3D=3D
>>>>
>>>> >>=3D3D3D<BR>>.html</A>=3D3D20
>>>> > =3D3D
>>>> ></FONT></DIV></BODY></HTML><BR>><BR>><BR></=3D3D
>>>> >BLOCKQUOTE></BODY></HTML>
>>>> >
>>>> >
>>>>
>>>>
>>>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
>>>><HTML><HEAD>
>>>><META http-equiv=3D3DContent-Type content=3D3D"text/html; =3D
>>>>charset=3D3Diso-8859-1">
>>>><META content=3D3D"MSHTML 6.00.2800.1400" name=3D3DGENERATOR>
>>>><STYLE></STYLE>
>>>></HEAD>
>>>><BODY bgColor=3D3D#ffffff>
>>>><DIV><FONT face=3D3DArial size=3D3D2>What do you guys =
think,</FONT></DIV>
>>>><DIV><FONT face=3D3DArial size=3D3D2>What are my chances of =
getting two 442s
>>> =3D
>>>>in the=3D20
>>>>mix</FONT></DIV>
>>>><DIV><FONT face=3D3DArial size=3D3D2>without my Mecs losing some =
of=3D20
>>>>their cards?</FONT></DIV>
>>>><DIV><FONT face=3D3DArial size=3D3D2>T.</FONT></DIV>
>>>><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
>>>><BLOCKQUOTE=3D20
>>>>style=3D3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: =
5px; =3D
>>>>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
>>>> <DIV>"Rod Lincoln" <<A=3D20
>>>> =3D
=
>>>>href=3D3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com=
</A>&g=3D
>>>>t;=3D20
>>>> wrote in message <A=3D20
>>>> =3D
=
>>>>href=3D3D"news:46453f51$1@linux">news:46453f51$1@linux</A>...</DIV><B=
R>Mec
>>> =3D
>>>>1 on=3D20
>>>> card A, 442 on Card B, Mec 2 on Card F (my last card)<BR>I'm =
running
> =3D
>>>>spdif out=3D20
>>>> of Mec 1 to a DAC 1<BR>Rod<BR>"Tom Bruhl" <<A=3D20
>>>> =
href=3D3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20
>>>> wrote:<BR>><BR>><BR>>Hey Rod,<BR>>That sounds =3D
>>>>promising. =3D20
>>>> What cards do you have the<BR>>Mecs and 442 connected=3D20
>>>> to?<BR>>Tom<BR>><BR>><BR>> "Rod Lincoln" <<A=3D20
>>>> =3D
=
>>>>href=3D3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com=
</A>&g=3D
>>>>t;=3D20
>>>> wrote in message =3D
>>>>=3D3D<BR>>news:46451438$1@linux...<BR>><BR>> I've=3D20
>>>> got 2 mecs and a 442 working here, no problems at all.<BR>> =3D
>>>>I'm also=3D20
>>>> clocking with the old Lucid genX word clock. 5 modules in=3D20
>>>> one<BR>=3D3D<BR>>mec,<BR>> 4 modules in the other. 1 adat =3D
>>>>card each. 6=3D20
>>>> eds cards, 3 UAD cards, =3D3D<BR>>all in<BR>> a magma. Oh =3D
>>>>yeah, a Lynx=3D20
>>>> one in the computer also.<BR>> Rod<BR>> "Tom Bruhl" =3D
>>>><<A=3D20
>>>> =
href=3D3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20
>>>> wrote:<BR>> ><BR>> ><BR>> >I'll be =3D
>>>>buying=3D20
>>>> either two MECs or two 442s but don't want it<BR>> >to =3D
>>>>mess my=3D20
>>>> whole rig up if the 442s don't play nice.<BR>> >I am using =3D
>>>>an=3D20
>>>> older Lucid clock now with 2 Mecs already.<BR>> >They each =3D
>>>>have=3D20
>>>> five modules in them. The others may<BR>> >see a =3D
>>>>single ADAT=3D20
>>>> at most someday maybe.<BR>> ><BR>> >I can make =3D
>>>>the=3D20
>>>> MECs fit in the machine room with the others<BR>> >but the =3D
>>>>442s=3D20
>>>> would be a lot easier.<BR>> ><BR>> >Anyone =3D
>>>>know=3D20
>>>> Deej?<BR>> ><BR>> >Also I have to find the pin =3D
>>>>config=3D20
>>>> for a 56 pin EDAC/ELCO ADAT<BR>> >connector. I want =3D
>>>>to chop=3D20
>>>> this bad boy off and solder 16 TRS<BR>> >to it. =3D
>>>>Anyone know=3D20
>>>> whether the ADAT wiring is different than<BR>> =3D20
>>>> >standard?<BR>> >Thanks,<BR>> =3D
>>>>>Tom<BR>> =3D20
>>>> ><BR>> ><BR>> ><BR>> =3D
>>>>><BR>> =3D20
>>>> >I choose Polesoft Lockspam to fight spam, and you?<BR>> =3D20
>>>> >http://www.polesoft.com/refer.html =3D3D20<BR>> =3D20
>>>> ><BR>> ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0=3D20
>>>> Transitional//EN"><BR>> =3D
>>>>><HTML><HEAD><BR>> =3D20
>>>> ><META http-equiv=3D3D3D3DContent-Type =
content=3D3D3D3D"text/html;=3D20
>>>> =3D3D3D<BR>> >charset=3D3D3D3Diso-8859-1"><BR>> =3D
>>>>><META=3D20
>>>> content=3D3D3D3D"MSHTML 6.00.2800.1400" =3D
>>>>name=3D3D3D3DGENERATOR><BR>> =3D20
>>>> ><STYLE></STYLE><BR>> =3D
>>>>></HEAD><BR>> =3D20
>>>> ><BODY bgColor=3D3D3D3D#ffffff><BR>> =3D
>>>>><DIV><FONT=3D20
>>>> face=3D3D3D3DArial size=3D3D3D3D2>I'll be buying either two MECs =
=3D
>>>>=3D3D<BR>>or two=3D20
>>>> =3D3D3D<BR>> >442s but=3D3D3D20<BR>> >don't want=3D20
>>>> it</FONT></DIV><BR>> ><DIV><FONT=3D20
>>>> face=3D3D3D3DArial size=3D3D3D3D2>to mess my whole rig up if the =
=3D
>>>>=3D3D<BR>>442s=3D20
>>>> =3D3D3D<BR>> >don't play=3D3D3D20<BR>> =3D20
>>>> >nice.</FONT></DIV><BR>> =3D
>>>>><DIV><FONT=3D20
>>>> face=3D3D3D3DArial size=3D3D3D3D2>I am using an older Lucid =3D
>>>>clock<BR>=3D3D<BR>>now=3D20
>>>> =3D3D3D<BR>> >with 2 Mecs=3D3D3D20<BR>> =3D20
>>>> >already.</FONT></DIV><BR>> =3D
>>>>><DIV><FONT=3D20
>>>> face=3D3D3D3DArial size=3D3D3D3D2>They each have five modules =
in=3D20
>>>> =3D3D<BR>>=3D3D3D<BR>> >them. The=3D3D3D20<BR>> =3D
>>>>>others=3D20
>>>> may</FONT></DIV><BR>> ><DIV><FONT=3D20
>>>> face=3D3D3D3DArial size=3D3D3D3D2>see a single ADAT at most=3D20
>>>> =3D3D<BR>>someday=3D3D3D20<BR>> =3D20
>>>> >maybe.</FONT></DIV><BR>> =3D
>>>>><DIV><FONT=3D20
>>>> face=3D3D3D3DArial size=3D3D3D3D2></FONT> =3D
>>>></DIV><BR>> =3D20
>>>> ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>I can make =3D
>>>>the MECs fit=3D20
>>>> in the =3D3D<BR>>machine<BR>> =3D3D3D<BR>> >room=3D20
>>>> with=3D3D3D20<BR>> >the =3D
>>>>others</FONT></DIV><BR>> =3D20
>>>> ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>but the 442s =3D
>>>>would be=3D20
>>>> =3D3D<BR>></FONT><FONT =3D3D3D<BR>> =3D20
>>>> >face=3D3D3D3DArial=3D3D3D20<BR>> >size=3D3D3D3D2>a lot=3D20
>>>> easier.</FONT></DIV><BR>> ><DIV><FONT =3D
>>>>
>>>> face=3D3D3D3DArial size=3D3D3D3D2></FONT> =3D
>>>></DIV><BR>> =3D20
>>>> ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>Anyone know=3D20
>>>> Deej?</FONT></DIV><BR>> ><DIV><FONT=3D20
>>>> face=3D3D3D3DArial size=3D3D3D3D2></FONT> =3D
>>>></DIV><BR>> =3D20
>>>> ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>Also I have =3D
>>>>to find the=3D20
>>>> pin =3D3D<BR>>config for<BR>> =3D3D3D<BR>> >a 56=3D20
>>>> pin=3D3D3D20<BR>> >EDAC/ELCO=3D20
>>>> ADAT</FONT></DIV><BR>> ><DIV><FONT=3D20
>>>> face=3D3D3D3DArial size=3D3D3D3D2>connector. I want to chop =
this=3D20
>>>> =3D3D<BR>>=3D3D3D<BR>> >bad boy off=3D3D3D20<BR>> =3D
>>>>>and solder=3D20
>>>> 16 TRS</FONT></DIV><BR>> ><DIV><FONT=3D20
>>>> face=3D3D3D3DArial size=3D3D3D3D2>to it. Anyone know whether =
the=3D20
>>>> =3D3D<BR>>=3D3D3D<BR>> >ADAT wiring is=3D3D3D20<BR>> =3D
>>>>>different=3D20
>>>> than</FONT></DIV><BR>> ><DIV><FONT=3D20
>>>> face=3D3D3D3DArial =3D
>>>>size=3D3D3D3D2>standard?</FONT></DIV><BR>> =3D20
>>>> ><DIV><FONT face=3D3D3D3DArial=3D20
>>>> size=3D3D3D3D2>Thanks,</FONT></DIV><BR>> =3D20
>>>> ><DIV><FONT face=3D3D3D3DArial=3D20
>>>> size=3D3D3D3D2>Tom</FONT></DIV><BR>> =3D20
>>>> ><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2></FONT> =3D
>>>>
>>>> </DIV><BR>> ><DIV><FONT face=3D3D3D3DArial=3D20
>>>> size=3D3D3D3D2></FONT> </DIV><BR>> =3D
>>>>><DIV><FONT=3D20
>>>> size=3D3D3D3D2><BR><BR>I choose Polesoft Lockspam to =3D
>>>>fight=3D20
>>>> =3D3D<BR>>spam, =3D3D3D<BR>> >and=3D3D3D20<BR>> =3D20
>>>> >you?<BR><A=3D3D3D20<BR>> =3D
>>>>=3D3D<BR>>>href=3D3D3D3D"<A=3D20
>>>> =3D
=
>>>>href=3D3D'http://www.polesoft.com/refer.html">http://www.polesoft.com=
/re'>h=3D
=
>>>>ttp://www.polesoft.com/refer.html">http://www.polesoft.com/re</A>=3D3=
D<B=3D
>>>>R>>fer=3D3D3D<BR>> =3D20
>>>> >.html</A>=3D20
>>>> </FONT></DIV></BODY></HTML><BR>> =3D20
>>>> ><BR>> ><BR>><BR>><BR>><!DOCTYPE HTML =3D
>>>>PUBLIC=3D20
>>>> "-//W3C//DTD HTML 4.0=3D20
>>>> Transitional//EN"><BR>><HTML><HEAD><BR>><META=3D20
>>>> http-equiv=3D3D3DContent-Type content=3D3D3D"text/html;=3D20
>>>> =3D3D<BR>>charset=3D3D3Diso-8859-1"><BR>><META =3D
>>>>content=3D3D3D"MSHTML=3D20
>>>> 6.00.2800.1400"=3D20
>>>> =3D
>>>>name=3D3D3DGENERATOR><BR>><STYLE></STYLE><BR>></HEA=3D
>>>>D><BR>><BODY=3D20
>>>> bgColor=3D3D3D#ffffff><BR>><DIV><FONT face=3D3D3DArial =3D
>>>>size=3D3D3D2>Hey=3D20
>>>> Rod,</FONT></DIV><BR>><DIV><FONT =3D
>>>>face=3D3D3DArial=3D20
>>>> size=3D3D3D2>That sounds promising. What cards =3D3D<BR>>do =
you=3D20
>>>> =3D
>>>>have=3D3D20<BR>>the</FONT></DIV><BR>><DIV><FONT =3D
>>>>
>>>> face=3D3D3DArial size=3D3D3D2>Mecs and 442 connected=3D20
>>>> to?</FONT></DIV><BR>><DIV><FONT face=3D3D3DArial =3D
>>>>
>>>> size=3D3D3D2>Tom</FONT></DIV><BR>><DIV><FONT=3D20
>>>> face=3D3D3DArial size=3D3D3D2></FONT> =3D
>>>></DIV><BR>><DIV>=3D20
>>>> =3D
>>>></DIV><BR>><BLOCKQUOTE=3D3D20<BR>>style=3D3D3D"PADDING-RIGHT: =3D
>>>>0px;=3D20
>>>> PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =3D3D<BR>>BORDER-LEFT: =
#000000 =3D
>>>>2px solid;=3D20
>>>> MARGIN-RIGHT: 0px"><BR>> <DIV>"Rod Lincoln"=3D20
>>>> <<A=3D3D20<BR>> =3D3D<BR>>href=3D3D3D"<A=3D20
>>>> =3D
=
>>>>href=3D3D'mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com=
</A>&a=3D
=
>>>>mp;g'>mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</=3D=
>>>>A>&g</A>=3D3D<BR>>t;=3D3D20<BR>> =3D20
>>>> wrote in message <A=3D3D20<BR>> =3D3D<BR>>href=3D3D3D"<A=3D20
>>>> =3D
=
>>>>href=3D3D"news:46451438$1@linux">news:46451438$1@linux</A>...</DIV><B=
R=3D
>>>>>I've">news:46451438$1@linux">news:46451438$1@linux</A>...</D=3D
>>>>IV><BR>I've</A>=3D3D<BR>>=3D20
>>>> got 2=3D3D20<BR>> mecs and a 442 working here, no problems =
at=3D20
>>>> all.<BR>I'm also clocking<BR>=3D3D<BR>>with =3D
>>>>the=3D3D20<BR>> old=3D20
>>>> Lucid genX word clock. 5 modules in one mec,<BR>4 modules in the =
=3D
>>>>
>>>> =3D3D<BR>>other. 1=3D3D20<BR>> adat card each. 6 eds cards, 3 =
=3D
>>>>UAD cards,=3D20
>>>> all in<BR>a magma. Oh yeah,<BR>=3D3D<BR>>a =3D
>>>>Lynx=3D3D20<BR>> one in=3D20
>>>> the computer also.<BR>Rod<BR>"Tom Bruhl"=3D20
>>>> <<A=3D3D20<BR>> href=3D3D3D"<A=3D20
>>>> =3D
=
>>>>href=3D3D'mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D3D20=
'>mailto=3D
>>>>:arpegio@comcast.net">arpegio@comcast.net</A>>=3D3D20</A><BR>&g=3D
>>>>t; =3D20
>>>> wrote:<BR>><BR>><BR>>I'll be buying either =3D
>>>>two MECs=3D20
>>>> or two =3D3D<BR>>442s but=3D3D20<BR>> don't want =3D
>>>>it<BR>>to mess=3D20
>>>> my whole rig up if the 442s don't play=3D3D20<BR>> =3D
>>>>nice.<BR>>I=3D20
>>>> am using an older Lucid clock now with 2 Mecs=3D3D20<BR>> =3D20
>>>> already.<BR>>They each have five modules in them. The=3D20
>>>> others=3D3D20<BR>> may<BR>>see a single ADAT at most =3D
>>>>someday=3D20
>>>> maybe.<BR>><BR>>I =3D3D<BR>>can =3D
>>>>make=3D3D20<BR>> the=3D20
>>>> MECs fit in the machine room with the others<BR>>but the 442s =
=3D
>>>>
>>>> =3D3D<BR>>would be=3D3D20<BR>> a lot=3D20
>>>> easier.<BR>><BR>>Anyone know=3D20
>>>> Deej?<BR>><BR>>Also I =3D3D<BR>>have =3D
>>>>to=3D3D20<BR>> find=3D20
>>>> the pin config for a 56 pin EDAC/ELCO =3D
>>>>=3D3D<BR>>ADAT<BR>>connector. I=3D20
>>>> want=3D3D20<BR>> to chop this bad boy off and solder 16=3D20
>>>> TRS<BR>>to it. Anyone =3D3D<BR>>know=3D3D20<BR>> =3D
>>>>whether the ADAT=3D20
>>>> wiring is different=3D3D20<BR>> =3D20
>>>> =3D
>>>>=3D3D<BR>>than<BR>>standard?<BR>>Thanks,<BR>>=3D
>>>>Tom<BR>><BR>><BR>><B=3D3D<BR>>R>><=3D
>>>>;BR>>I=3D3D20<BR>> =3D20
>>>> choose Polesoft Lockspam to fight spam, and=3D3D20<BR>> =3D20
>>>> you?<BR>>http://www.polesoft.com/refer.html =3D
>>>>=3D3D20<BR>> =3D20
>>>> <BR>><BR>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML =3D
>>>>
>>>> 4.0=3D3D20<BR>> =3D20
>>>> =3D
>>>>Transitional//EN"><BR>><HTML><HEAD><BR>>=3D
>>>><META=3D3D20<BR>> =3D20
>>>> http-equiv=3D3D3D3DContent-Type =3D
>>>>content=3D3D3D3D"text/html;=3D3D20<BR>> =3D20
>>>> =3D3D3D<BR>>charset=3D3D3D3Diso-8859-1"><BR>><META =3D
>>>>
>>>> =3D3D<BR>>content=3D3D3D3D"MSHTML=3D3D20<BR>> =3D
>>>>6.00.2800.1400"=3D3D20<BR>> =3D20
>>>> =3D
>>>>=3D3D<BR>>name=3D3D3D3DGENERATOR><BR>><STYLE></STYLE&=3D
>>>>gt;<BR>></HEA=3D3D<BR>>D><BR>><BODY=3D3D20<BR>&=3D
>>>>gt; =3D20
>>>> bgColor=3D3D3D3D#ffffff><BR>><DIV><FONT =3D
>>>>face=3D3D3D3DArial=3D20
>>>> =3D3D<BR>>size=3D3D3D3D2>I'll=3D3D20<BR>> be buying either =3D
>>>>two MECs or two=3D20
>>>> =3D3D3D<BR>>442s but=3D3D3D20<BR>>don't=3D20
>>>> =3D3D<BR>>want=3D3D20<BR>> =3D20
>>>> it</FONT></DIV><BR>><DIV><FONT=3D20
>>>> face=3D3D3D3DArial=3D3D20<BR>> size=3D3D3D3D2>to mess my whole =
=3D
>>>>rig up if the=3D20
>>>> 442s =3D3D3D<BR>>don't=3D3D20<BR>> =3D20
>>>> =3D
>>>>=3D3D<BR>>play=3D3D3D20<BR>>nice.</FONT></DIV><BR&=3D
>>>>gt;><DIV><FON=3D3D<BR>>T=3D3D20<BR>> =3D20
>>>> face=3D3D3D3DArial size=3D3D3D3D2>I am using an older Lucid =
clock now=3D20
>>>> =3D3D<BR>>=3D3D3D<BR>>with 2=3D3D20<BR>> =3D20
>>>> =3D
>>>>
>>> =3D3D<BR>>Mecs=3D3D3D20<BR>>already.</FONT></DIV><=3D
>>>>BR>><DIV><=3D3D<BR>>FONT=3D3D20<BR>> =3D20
>>>> face=3D3D3D3DArial size=3D3D3D3D2>They each have five modules =
in=3D20
>>>> =3D3D<BR>>=3D3D3D<BR>>them.=3D3D20<BR>> =3D
>>>>The=3D3D3D20<BR>>others=3D20
>>>> =3D
>>>>=3D3D<BR>>may</FONT></DIV><BR>><DIV><FONT=3D3D=3D
>>>>20<BR>> =3D20
>>>> face=3D3D3D3DArial size=3D3D3D3D2>see a single ADAT at =3D
>>>>most=3D3D20<BR>> =3D20
>>>> =3D
>>>>=3D3D<BR>>someday=3D3D3D20<BR>>maybe.</FONT></DIV> <=3D
>>>>;BR>><DIV><=3D3D<BR>>;FONT=3D3D20<BR>> =3D20
>>>> face=3D3D3D3DArial size=3D3D3D3D2></FONT>=3D20
>>>> =3D
>>>>=3D3D<BR>></DIV><BR>><DIV><FONT=3D3D20<BR>>&nbs=3D
>>>>p;=3D20
>>>> face=3D3D3D3DArial size=3D3D3D3D2>I can make the MECs fit in =3D
>>>>the=3D3D20<BR>> =3D20
>>>> machine<BR>=3D3D3D<BR>>room=3D20
>>>> with=3D3D3D20<BR>>the=3D3D20<BR>> =3D20
>>>> others</FONT></DIV><BR>><DIV><FONT=3D20
>>>> =3D3D<BR>>face=3D3D3D3DArial=3D3D20<BR>> size=3D3D3D3D2>but the =
=3D
>>>>442s would be=3D20
>>>> </FONT><FONT=3D3D20<BR>> =3D20
>>>> =3D
>>>>=3D3D3D<BR>>face=3D3D3D3DArial=3D3D3D20<BR>>size=3D3D3D3D2 >a=3D
>>>>=3D20
>>>> lot=3D3D20<BR>> =3D20
>>>> easier.</FONT></DIV><BR>><DIV><FONT=3D20
>>>> =3D3D<BR>>face=3D3D3D3DArial=3D3D20<BR>> =3D
>>>>size=3D3D3D3D2></FONT>=3D20
>>>> </DIV><BR>><DIV><FONT=3D20
>>>> =3D3D<BR>>face=3D3D3D3DArial=3D3D20<BR>> =
size=3D3D3D3D2>Anyone=3D20
>>>> know=3D3D20<BR>> =3D20
>>>> Deej?</FONT></DIV><BR>><DIV><FONT=3D20
>>>> =3D3D<BR>>face=3D3D3D3DArial=3D3D20<BR>> =3D
>>>>size=3D3D3D3D2></FONT>=3D20
>>>> </DIV><BR>><DIV><FONT=3D20
>>>> =3D3D<BR>>face=3D3D3D3DArial=3D3D20<BR>> size=3D3D3D3D2>Also I =
=3D
>>>>have to find the=3D20
>>>> pin config for<BR>=3D3D3D<BR>>a =3D
>>>>=3D3D<BR>>56=3D3D20<BR>> =3D20
>>>> pin=3D3D3D20<BR>>EDAC/ELCO=3D3D20<BR>> =3D20
>>>> ADAT</FONT></DIV><BR>><DIV><FONT=3D20
>>>> =3D3D<BR>>face=3D3D3D3DArial=3D3D20<BR>> =3D
>>>>size=3D3D3D3D2>connector. I want to=3D20
>>>> chop this =3D3D3D<BR>>bad boy=3D20
>>>> =3D3D<BR>>off=3D3D3D20<BR>>and=3D3D20<BR>> solder 16=3D20
>>>> TRS</FONT></DIV><BR>><DIV><FONT=3D20
>>>> =3D3D<BR>>face=3D3D3D3DArial=3D3D20<BR>> size=3D3D3D3D2>to it. =
=3D
>>>>Anyone know=3D20
>>>> whether the =3D3D3D<BR>>ADAT wiring=3D3D20<BR>> =3D20
>>>> is=3D3D3D20<BR>>different=3D3D20<BR>> =3D20
>>>> than</FONT></DIV><BR>><DIV><FONT=3D20
>>>> =3D3D<BR>>face=3D3D3D3DArial=3D3D20<BR>> =3D20
>>>> =3D
>>>>=3D3D<BR>>size=3D3D3D3D2>standard?</FONT></DIV><BR >&g=3D
>>>>t;<DIV><FO=3D3D<BR>>NT=3D3D20<BR>> =3D20
>>>> face=3D3D3D3DArial=3D3D20<BR>> =3D20
>>>> =3D
>>>>=3D3D<BR>>size=3D3D3D3D2>Thanks,</FONT></DIV><BR>>=3D
>>>><DIV><FONT=3D3D<BR>>=3D3D20<BR>> =3D20
>>>> face=3D3D3D3DArial=3D3D20<BR>> =3D20
>>>> =3D
>>>>size=3D3D3D3D2>Tom</FONT></DIV><BR>><DIV><=3D
>>>>FONT=3D3D20<BR>> =3D20
>>>> face=3D3D3D3DArial size=3D3D3D3D2></FONT>=3D20
>>>> =3D
>>>>=3D3D<BR>></DIV><BR>><DIV><FONT=3D3D20<BR>>&nbs=3D
>>>>p;=3D20
>>>> face=3D3D3D3DArial size=3D3D3D3D2></FONT>=3D20
>>>> =3D
>>>>=3D3D<BR>></DIV><BR>><DIV><FONT=3D3D20<BR>>&nbs=3D
>>>>p;=3D20
>>>> size=3D3D3D3D2><BR><BR>I choose Polesoft Lockspam to =3D
>>>>fight=3D20
>>>> =3D3D<BR>>spam,=3D3D20<BR>> =3D20
>>>> =3D
>>>>=3D3D<BR>>=3D3D3D<BR>>and=3D3D3D20<BR>>you?<BR><A=3D
>>>>=3D3D3D20<BR>>href=3D3D3D3D"<A=3D3D20<BR>> =3D20
>>>> =3D
=
>>>>=3D3D<BR>>href=3D3D3D'http://www.polesoft.com/refer.html">http://www.=
po=3D
=
>>>>lesoft.com/refer=3D3D<BR>>'>http://www.polesoft.com/refer.html">ht=3D=
>>>>tp://www.polesoft.com/refer</A=3D3D<BR>>>=3D3D3D<BR>>.html&=3D
>>>>lt;/A>=3D3D20<BR>> =3D20
>>>> =3D
>>>>=3D3D<BR>></FONT></DIV></BODY></HTML><BR>&=3D
>>>>gt;<BR>><BR></=3D3D<BR>>BLOCKQUOTE></BODY><=3D
>>>>;/HTML><BR>><BR>><BR></BLOCKQUOTE></BODY></HTML>
>>>>
>>>>
>>>
>>
>>
>=20
------=_NextPart_000_0013_01C794B9.CDE36180
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>DJ,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Rod says his two Mecs have 4 and 5 =
modules=20
each.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I think it's hit or miss. I also =
wonder if it=20
has to do with</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>reinstalling Paris with all the =
hardware present=20
the first</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>go. I don't know for sure. =20
</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I'll bet Chris has more than a morsel =
of info about=20
how to get it</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>to work. He's been =
successful many times=20
in the past.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"DJ" <<A=20
=
href=3D"http://www.aarrrrggghhh!!!.com">www.aarrrrggghhh!!!.com</A>> =
wrote in=20
message <A=20
=
href=3D"news:46462ad8@linux">news:46462ad8@linux</A>...</DIV>Hmmmm.......=
.....maybe=20
so. ;o) How many/what kind of I/O modules do you have <BR>in the MEC =
that is=20
on Card A?<BR><BR>"Rod Lincoln" <<A=20
=
href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&g=
t;=20
wrote in message <BR><A=20
=
href=3D"news:46462845$1@linux">news:46462845$1@linux</A>...<BR>><BR>&g=
t; My=20
442 works reliably off the B card. maybe DJ slapped some sense into=20
it.<BR>> ;-)<BR>> Rod<BR>> "DJ" <<A=20
=
href=3D"http://www.aarrrrggghhh!!!.com">www.aarrrrggghhh!!!.com</A>>=20
wrote:<BR>>>IIRC 442's are initialized differently from the MEC =
and need=20
to be hung<BR>> off<BR>>>Card A to work reliablein a multi =
interface=20
setup. this will necessitate<BR>><BR>>>using the 20 bit I/O =
for=20
monitoring the mix.<BR>>><BR>>>"Dimitrios" <<A=20
href=3D"mailto:musurgio@otenet.gr">musurgio@otenet.gr</A>> wrote in =
message=20
<A=20
=
href=3D"news:46456534$1@linux">news:46456534$1@linux</A>...<BR>>>&g=
t;<BR>>>>=20
Hi Tom,<BR>>>> When I tried this 442 and mec combination I =
only found=20
a working clocked<BR>>>> system if 442 was a master so 20 =
bits versus=20
24 was inportant to me for<BR>><BR>>>> =
monitoring<BR>>>>=20
! (I still record only 16 bits !).<BR>>>> What though was =
evident is=20
that I could NEVER have the ins and outs of<BR>> =
442<BR>>>>=20
working correctly.<BR>>>> You know sometimes we use 442 along =
mec and=20
we mostly don't use much of<BR>><BR>>>> =
442<BR>>>> except=20
for a spdif or something.<BR>>>> It would be nice if someone =
could=20
CHECK that in a multi mec 442 system<BR>> ALL<BR>>>> 442's =
ins and=20
outs along with mec's are working correctly.<BR>>>> I know =
this is=20
much to ask but Tom (and I at least) would love that =
kind<BR>>>> of=20
testing info.<BR>>>> A 442 would be a great addition to me IF =
mec=20
could be main card A and<BR>> all<BR>>>> ins and outs of=20
everything would work.<BR>>>> Is this an XP problem or is it =
the same=20
as in win98 or Me ?<BR>>>> Regards,<BR>>>>=20
Dimitrios<BR>>>><BR>>>> "Tom Bruhl" <<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=20
wrote:<BR>>>>><BR>>>>> <BR>>>>>What =
do you=20
guys think,<BR>>>>>What are my chances of getting two 442s =
in the=20
mix<BR>>>>>without my Mecs losing some of their=20
=
cards?<BR>>>>>T.<BR>>>>> <BR>>>>> =
;=20
"Rod Lincoln" <<A=20
=
href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&g=
t;=20
wrote in message=20
=
=3D<BR>>>>>news:46453f51$1@linux...<BR>>>>><BR>&g=
t;>>> =20
Mec 1 on card A, 442 on Card B, Mec 2 on Card F (my last=20
card)<BR>>>>> I'm running spdif out of Mec 1 to a =
DAC=20
1<BR>>>>> Rod<BR>>>>> "Tom Bruhl" =
<<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=20
wrote:<BR>>>>> ><BR>>>>> =20
><BR>>>>> >Hey Rod,<BR>>>>> =
>That=20
sounds promising. What cards do you have =
the<BR>>>>> =20
>Mecs and 442 connected to?<BR>>>>> =20
>Tom<BR>>>>> ><BR>>>>> =20
><BR>>>>> > "Rod Lincoln" <<A=20
=
href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&g=
t;=20
wrote in message =3D3D<BR>>>>> =20
>news:46451438$1@linux...<BR>>>>> =20
><BR>>>>> > I've got 2 mecs and a 442 =
working=20
here, no problems at all.<BR>>>>> > I'm =
also=20
clocking with the old Lucid genX word clock. 5 modules =
in<BR>>>>=20
=3D<BR>>>>>one<BR>>>>> =20
=3D3D<BR>>>>> >mec,<BR>>>>> =
> 4=20
modules in the other. 1 adat card each. 6 eds cards, 3 UAD=20
cards,<BR>>>> =
=3D<BR>>>>>=3D3D<BR>>>>> =20
>all in<BR>>>>> > a magma. Oh yeah, a =
Lynx one=20
in the computer also.<BR>>>>> > =20
Rod<BR>>>>> > "Tom Bruhl" <<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=20
wrote:<BR>>>>> > =
><BR>>>>> =20
> ><BR>>>>> > >I'll be =
buying either=20
two MECs or two 442s but don't want it<BR>>>>> =
> =20
>to mess my whole rig up if the 442s don't play=20
nice.<BR>>>>> > >I am using an older =
Lucid clock=20
now with 2 Mecs already.<BR>>>>> > >They =
each=20
have five modules in them. The others =
may<BR>>>>> =20
> >see a single ADAT at most someday=20
maybe.<BR>>>>> > =
><BR>>>>> =20
> >I can make the MECs fit in the machine room with the=20
others<BR>>>>> > >but the 442s would be =
a lot=20
easier.<BR>>>>> > =
><BR>>>>> =20
> >Anyone know Deej?<BR>>>>> > =20
><BR>>>>> > >Also I have to find the =
pin=20
config for a 56 pin EDAC/ELCO ADAT<BR>>>>> =
> =20
>connector. I want to chop this bad boy off and solder 16=20
TRS<BR>>>>> > >to it. Anyone know =
whether=20
the ADAT wiring is different than<BR>>>>> > =
>standard?<BR>>>>> > =20
>Thanks,<BR>>>>> > =20
>Tom<BR>>>>> > =
><BR>>>>> =20
> ><BR>>>>> > =20
><BR>>>>> > =
><BR>>>>> =20
> >I choose Polesoft Lockspam to fight spam, and=20
you?<BR>>>>> > =20
>http://www.polesoft.com/refer.html =
=3D3D20<BR>>>>> =20
> ><BR>>>>> > ><!DOCTYPE =
HTML=20
PUBLIC "-//W3C//DTD HTML 4.0 =
Transitional//EN"><BR>>>>> =20
> ><HTML><HEAD><BR>>>>> =
> =20
><META http-equiv=3D3D3D3DContent-Type =
content=3D3D3D3D"text/html;=20
=3D<BR>>>>>=3D3D3D<BR>>>>> > =20
>charset=3D3D3D3Diso-8859-1"><BR>>>>> =
> =20
><META content=3D3D3D3D"MSHTML 6.00.2800.1400"=20
name=3D3D3D3DGENERATOR><BR>>>>> > =20
><STYLE></STYLE><BR>>>>> > =20
></HEAD><BR>>>>> > ><BODY=20
bgColor=3D3D3D3D#ffffff><BR>>>>> > =20
><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>I'll be =
buying either=20
two<BR>>>> =3D<BR>>>>>MECs =
=3D3D<BR>>>>> =20
>or two =3D3D3D<BR>>>>> > >442s=20
but=3D3D3D20<BR>>>>> > >don't want=20
it</FONT></DIV><BR>>>>> > =20
><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>to mess =
my whole rig=20
up<BR>> =3D<BR>>>>>if the =
=3D3D<BR>>>>> >442s=20
=3D3D3D<BR>>>>> > >don't=20
play=3D3D3D20<BR>>>>> > =20
>nice.</FONT></DIV><BR>>>>> =
> =20
><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>I am =
using an older=20
Lucid<BR>>>> =
=3D<BR>>>>>clock<BR>>>>> =20
=3D3D<BR>>>>> >now =
=3D3D3D<BR>>>>> =20
> >with 2 Mecs=3D3D3D20<BR>>>>> =
> =20
>already.</FONT></DIV><BR >>>>> =
> =20
><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>They each =
have five=20
=3D<BR>>>>>modules in =3D3D<BR>>>>> =20
>=3D3D3D<BR>>>>> > >them.=20
The=3D3D3D20<BR>>>>> > >others=20
may</FONT></DIV><BR>>>>> > =20
><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>see a =
single ADAT at=20
most<BR>>>> =
=3D<BR>>>>>=3D3D<BR>>>>> =20
>someday=3D3D3D20<BR>>>>> > =20
>maybe.</FONT></DIV><BR>>>>> =
> =20
><DIV><FONT face=3D3D3D3DArial =
size=3D3D3D3D2></FONT>=20
</DIV><BR>>>>> > =
><DIV><FONT=20
face=3D3D3D3DArial size=3D3D3D3D2>I can make the MECs fit<BR>>=20
=3D<BR>>>>>in the =3D3D<BR>>>>> =20
>machine<BR>>>>> > =20
=3D3D3D<BR>>>>> > >room=20
with=3D3D3D20<BR>>>>> > >the=20
others</FONT></DIV><BR>>>>> > =20
><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>but the =
442s would be=20
=3D3D<BR>>>>> ></FONT><FONT=20
=3D3D3D<BR>>>>> > =20
>face=3D3D3D3DArial=3D3D3D20<BR>>>>> > =20
>size=3D3D3D3D2>a lot=20
easier.</FONT></DIV><BR>>>>> > =20
><DIV><FONT face=3D3D3D3DArial =
size=3D3D3D3D2></FONT>=20
</DIV><BR>>>>> > =
><DIV><FONT=20
face=3D3D3D3DArial size=3D3D3D3D2>Anyone know=20
=
=3D<BR> >>>>Deej?</FONT>&a mp;lt;/DIV> <BR>>>>>=
=20
> ><DIV><FONT face=3D3D3D3DArial=20
size=3D3D3D3D2></FONT> </DIV><BR>>>>> =
> ><DIV><FONT face=3D3D3D3DArial =
size=3D3D3D3D2>Also I=20
have to find the<BR>> =3D<BR>>>>>pin=20
=3D3D<BR>>>>> >config =
for<BR>>>>> =20
> =3D3D3D<BR>>>>> > >a 56=20
pin=3D3D3D20<BR>>>>> > >EDAC/ELCO=20
ADAT</FONT></DIV><BR>>>>> > =20
><DIV><FONT face=3D3D3D3DArial =
size=3D3D3D3D2>connector. I want to=20
chop<BR>>>> =3D<BR>>>>>this =
=3D3D<BR>>>>> =20
>=3D3D3D<BR>>>>> > >bad boy=20
off=3D3D3D20<BR>>>>> > >and solder 16=20
TRS</FONT></DIV><BR>>>>> > =20
><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>to it. =
Anyone know=20
=3D<BR>>>>>whether the =3D3D<BR>>>>> =20
>=3D3D3D<BR>>>>> > >ADAT wiring=20
is=3D3D3D20<BR>>>>> > >different=20
than</FONT></DIV><BR>>>>> > =20
><DIV><FONT face=3D3D3D3DArial=20
=
size=3D3D3D3D2>standard?</FONT>< /DIV> <BR>>>>>&=
nbsp;=20
> ><DIV><FONT face=3D3D3D3DArial=20
=
size=3D3D3D3D2>Thanks,</FONT></D IV> <BR>>>>>&nb=
sp;=20
> ><DIV><FONT face=3D3D3D3DArial=20
=
size=3D3D3D3D2>Tom</FONT></DIV&a mp;gt; <BR>>>>> =
> ><DIV><FONT face=3D3D3D3DArial=20
size=3D3D3D3D2></FONT> </DIV><BR>>>>> =
> ><DIV><FONT face=3D3D3D3DArial=20
size=3D3D3D3D2></FONT> </DIV><BR>>>>> =
> ><DIV><FONT =
size=3D3D3D3D2><BR><BR>I= 20
choose Polesoft Lockspam to =3D<BR>>>>>fight=20
=3D3D<BR>>>>> >spam, =
=3D3D3D<BR>>>>> =20
> >and=3D3D3D20<BR>>>>> > =20
>you?<BR><A=3D3D3D20<BR>>>>> > =20
=3D3D<BR>>>>> =
=3D<BR> >>>>>>href=3D3D3D3 D "<A=20
=
href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com'>http=
://www.polesoft.com/refer.html">http://www.polesoft.com</A>=3D<BR>>=
>>>/re=3D3D<BR>>>>> =20
>fer=3D3D3D<BR>>>>> > =
>.html</A>=20
=
</FONT></DIV></BODY&g t;</HTML> <BR>>>>>&n=
bsp;=20
> ><BR>>>>> > =20
><BR>>>>> ><BR>>>>> =20
><BR>>>>> ><!DOCTYPE HTML PUBLIC =
"-//W3C//DTD HTML=20
4.0 Transitional//EN"><BR>>>>> =20
><HTML><HEAD><BR>>>>> ><META=20
http-equiv=3D3D3DContent-Type content=3D3D3D"text/html;=20
=3D3D<BR>>>>> =20
>charset=3D3D3Diso-8859-1"><BR>>>>> =
><META=20
content=3D3D3D"MSHTML 6.00.2800.1400"=20
name=3D3D3DGENERATOR><BR>>>>> =20
><STYLE></STYLE><BR>>>>> =20
></HEAD><BR>>>>> ><BODY=20
bgColor=3D3D3D#ffffff><BR>>>>> =
><DIV><FONT=20
face=3D3D3DArial size=3D3D3D2>Hey=20
Rod,</FONT></DIV><BR>>>>> =20
><DIV><FONT face=3D3D3DArial size=3D3D3D2>That sounds =
promising.=20
What =3D<BR>>>>>cards =3D3D<BR>>>>> =
>do you=20
have=3D3D20<BR>>>>> =20
>the</FONT></DIV><BR>>>>> =20
><DIV><FONT face=3D3D3DArial size=3D3D3D2>Mecs and 442 =
connected=20
=
=3D<BR> >>>>to?</FONT>& ;lt;/DIV> <BR>>>>>&n=
bsp;=20
><DIV><FONT face=3D3D3DArial=20
size=3D3D3D2>Tom</FONT></DIV& ;gt; <BR>>>>> =
><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> =
</DIV><BR>>>>> ><DIV>=20
</DIV><BR>>>>> =20
><BLOCKQUOTE=3D3D20<BR>>>>> =20
>style=3D3D3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT:=20
5px;<BR>> =3D<BR>>>>>=3D3D<BR>>>>> =20
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT:=20
0px"><BR>>>>> > <DIV>"Rod Lincoln" =
<<A=3D3D20<BR>>>>> > =20
=3D3D<BR>>>>> =
=3D<BR>>>>>>href=3D3D3D "<A=20
=
href=3D'mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A'>m=
ailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A</A>=3D=
<BR>>>>>>&g=3D3D <BR>>>>> =20
>t;=3D3D20<BR>>>>> > wrote in message=20
<A=3D3D20<BR>>>>> > =
=3D3D<BR>>>>> =20
=3D<BR>>>>>>href=3D3D3D "<A=20
=
href=3D'news:46451438$1@linux">news:46451438$1@linux</A>...</DIV><BR>I'>n=
ews:46451438$1@linux">news:46451438$1@linux</A>...</DIV>&l=
t;BR>I</A>=3D<BR>>>>>'ve=3D3D <BR>>>>> =20
> got 2=3D3D20<BR>>>>> > mecs and a 442 =
working=20
here, no problems at all.<BR>I'm also=20
=3D<BR>>>>>clocking<BR>>>>> =20
=3D3D<BR>>>>> >with =
the=3D3D20<BR>>>>> =20
> old Lucid genX word clock. 5 modules in one mec,<BR>4 =
modules=20
in<BR>> =3D<BR>>>>>the =3D3D<BR>>>>> =
>other.=20
1=3D3D20<BR>>>>> > adat card each. 6 eds =
cards, 3 UAD=20
cards, all in<BR>a magma. Oh=20
=3D<BR>>>>>yeah,<BR>>>>> =20
=3D3D<BR>>>>> >a =
Lynx=3D3D20<BR>>>>> =20
> one in the computer also.<BR>Rod<BR>"Tom Bruhl" =
<<A=3D3D20<BR>>>>> > href=3D3D3D"<A=20
=
href=3D'mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D3D20'>mail=
to:arpegio@comcast.net">arpegio@comcast.net</A>>=3D3D20</A><B=
R>>>>> =20
> wrote:<BR>><BR>>&a mp;lt;BR>>I'll be =
buying=20
either two MECs or two =3D3D<BR>>>>> >442s=20
but=3D3D20<BR>>>>> > don't want =
it<BR>>to=20
mess my whole rig up if the 442s don't=20
=3D<BR>>>>>play=3D3D20<BR>>>>> =
> =20
nice.<BR>>I am using an older Lucid clock now with 2=20
Mecs=3D3D20<BR>>>>> > =
already.<BR>>They each=20
have five modules in them. The others=3D3D20<BR>>>>> =
> may<BR>>see a single ADAT at most someday=20
maybe.<BR>><BR>>I =3D3D<BR>>>>> =
>can=20
make=3D3D20<BR>>>>> > the MECs fit in the =
machine=20
room with the others<BR>>but the 442s<BR>>=20
=3D<BR>>>>>=3D3D<BR>>>>> >would=20
be=3D3D20<BR>>>>> > a lot=20
easier.<BR>><BR>>A nyone know=20
Deej?<BR>><BR>>Als o I =
=3D3D<BR>>>>> >have=20
to=3D3D20<BR>>>>> > find the pin config for =
a 56 pin=20
EDAC/ELCO =3D3D<BR>>>>> =
>ADAT<BR>>connector. I=20
want=3D3D20<BR>>>>> > to chop this bad boy =
off and=20
solder 16 TRS<BR>>to it. Anyone =
=3D3D<BR>>>>> =20
>know=3D3D20<BR>>>>> > whether the ADAT =
wiring is=20
different=3D3D20<BR>>>>> > =20
=3D3D<BR>>>>> =20
=
>than<BR>>standard?<BR&am p;gt;>Thanks,<BR>>Tom<=
BR>><BR>><BR&g t;><B=3D3D <BR>>>>> =
;=20
>R>><BR>>I=3D3D20<BR >>>>> =
> choose=20
Polesoft Lockspam to fight spam, and=3D3D20<BR>>>>> =
> =20
you?<BR>>http://www.polesoft.com/refer.html=20
=3D3D20<BR>>>>> > =20
<BR>><BR>>< !DOCTYPE HTML PUBLIC "-//W3C//DTD HTML =
4.0=3D3D20<BR>>>>> > =20
=
Transitional//EN" ><BR>><HTML>&l t;HEAD><BR>>=
<META=3D3D20<BR>>>>> =20
> http-equiv=3D3D3D3DContent-Type=20
content=3D3D3D3D"text/html;=3D3D20<BR>>>>> =
> =20
=
=3D3D3D<BR>>charset=3D3D3D3Diso-8859-1"><BR>><MET=
A=20
=3D3D<BR>>>>> =20
>content=3D3D3D3D"MSHTML=3D3D20<BR>>>>> =
> =20
6.00.2800.1400"=3D3D20<BR>>>>> > =20
=3D3D<BR>>>>> =20
=
>name=3D3D3D3DGENERATOR><BR>& ;gt;<STYLE></STYLE>&l=
t;BR>></HEA=3D3D<BR>>>>> =20
>D><BR>><BODY=3D3D 20 <BR>>>>> =
> =20
bgColor=3D3D3D3D#ffffff><BR>>&am p;lt;DIV><FONT =
face=3D3D3D3DArial=20
=3D3D<BR>>>>> =20
>size=3D3D3D3D2>I'll=3D3D20<BR>>>>> > =
be buying=20
either two MECs or two =3D3D3D<BR>>442s=20
=3D<BR> >>>>but=3D3D3D20<BR&g t;>don't=20
=3D3D<BR>>>>> =
>want=3D3D20<BR>>>>> =20
> =
it</FONT></DIV><BR> ;><DIV><FONT=20
face=3D3D3D3DArial=3D3D20<BR>>>>> > =
size=3D3D3D3D2>to=20
mess my whole rig up if the 442s=20
=
=3D<BR> >>>>=3D3D3D<BR>&am p;gt;don't=3D3D20 <BR>>>>&=
gt; =20
> =3D3D<BR>>>>> =20
=
>play=3D3D3D20<BR>>nice.< /FONT></DIV><BR>&g=
t;<DIV><FON=3D3D<BR>>>>> =20
>T=3D3D20<BR>>>>> > face=3D3D3D3DArial=20
size=3D3D3D3D2>I am using an older Lucid clock now<BR>>=20
=3D<BR>>>>>=3D3D<BR>>>>> =
>=3D3D3D<BR>>with=20
2=3D3D20<BR>>>>> > =
=3D3D<BR>>>>> =20
=
>Mecs=3D3D3D20<BR>>already.& lt;/FONT></DIV><BR>=
;><DIV><=3D3D<BR>>>>> =20
>FONT=3D3D20<BR>>>>> > =
face=3D3D3D3DArial=20
size=3D3D3D3D2>They each have five modules in =
=3D3D<BR>>>>> =20
>=3D3D3D<BR>>them.=3D3D20<BR>>>>> =
> =20
The=3D3D3D20<BR>>others =3D3D<BR>>>>> =20
=
>may</FONT></DIV>< BR>><DIV><FONT=3D3D20 <=
BR>>>>> =20
> face=3D3D3D3DArial size=3D3D3D3D2>see a single ADAT at=20
most=3D3D20<BR>>>>> > =
=3D3D<BR>>>>> =20
=
>someday=3D3D3D20<BR>>maybe.& ;lt;/FONT></DIV><BR&g=
t;><DIV><=3D3D<BR>>>>> =20
>;FONT=3D3D20<BR>>>>> > =
face=3D3D3D3DArial=20
size=3D3D3D3D2></FONT> =3D3D<BR>>>>> =20
=
></DIV><BR>>&l t;DIV><FONT=3D3D20 <BR>>>>&=
gt; =20
> face=3D3D3D3DArial size=3D3D3D3D2>I can make the MECs =
fit in=20
the=3D3D20<BR>>>>> > =20
machine<BR>=3D3D3D<BR>>ro om=20
with=3D3D3D20<BR>>the=3D3D20<BR>>>>> =
> =20
others</FONT></DIV><BR&am p;gt;><DIV><FONT=20
=3D3D<BR>>>>> =20
>face=3D3D3D3DArial=3D3D20<BR>>>>> > =20
size=3D3D3D3D2>but the 442s would be=20
</FONT><FONT=3D3D20<BR>>>>> > =20
=
=3D3D3D<BR>>face=3D3D3D3DArial=3D3D3D20 <BR>>size=3D3D3D=
3D2>a=20
lot=3D3D20<BR>>>>> > =20
easier.</FONT></DIV><BR&a mp;gt;><DIV><FONT=20
=3D3D<BR>>>>> =20
>face=3D3D3D3DArial=3D3D20<BR>>>>> > =20
size=3D3D3D3D2></FONT> =
</DIV><BR>><DIV&am p;gt;<FONT=20
=3D3D<BR>>>>> =20
>face=3D3D3D3DArial=3D3D20<BR>>>>> > =20
size=3D3D3D3D2>Anyone know=3D3D20<BR>>>>> =
> =20
Deej?</FONT></DIV><BR& ;gt;><DIV><FONT=20
=3D3D<BR>>>>> =20
>face=3D3D3D3DArial=3D3D20<BR>>>>> > =20
size=3D3D3D3D2></FONT> =
</DIV><BR>><DIV&am p;gt;<FONT=20
=3D3D<BR>>>>> =20
>face=3D3D3D3DArial=3D3D20<BR>>>>> > =20
size=3D3D3D3D2>Also I have to find the pin config=20
for<BR>=3D3D3D<BR>>a<BR>>>>=20
=3D<BR>>>>>=3D3D<BR>>>>> =20
>56=3D3D20<BR>>>>> > =20
pin=3D3D3D20<BR>>EDAC/ELCO=3D3D20<BR>>>>> =
> =20
ADAT</FONT></DIV><BR& gt;><DIV><FONT=20
=3D3D<BR>>>>> =20
>face=3D3D3D3DArial=3D3D20<BR>>>>> > =20
size=3D3D3D3D2>connector. I want to chop this =
=3D3D3D<BR>>bad boy=20
=3D3D<BR>>>>> =20
>off=3D3D3D20<BR>>and=3D3D20<BR >>>>> =
> =20
solder 16 =
TRS</FONT></DIV><BR&g t;><DIV><FONT=20
=3D3D<BR>>>>> =20
>face=3D3D3D3DArial=3D3D20<BR>>>>> > =20
size=3D3D3D3D2>to it. Anyone know whether the =
=3D3D3D<BR>>ADAT=20
=3D<BR>>>>>wiring=3D3D20<BR>>>>> =
> =20
is=3D3D3D20<BR>>different=3D3D20<BR>>>>> =
> =20
than</FONT></DIV><BR& gt;><DIV><FONT=20
=3D3D<BR>>>>> =20
>face=3D3D3D3DArial=3D3D20<BR>>>>> > =20
=3D3D<BR>>>>> =20
=
>size=3D3D3D3D2>standard?</FONT> </DIV><BR>><=
;DIV><FO=3D3D<BR>>>>> =20
>NT=3D3D20<BR>>>>> > =20
face=3D3D3D3DArial=3D3D20<BR>>>>> > =20
=3D3D<BR>>>>> =20
=
>size=3D3D3D3D2>Thanks,</FONT>&a mp;lt;/DIV><BR>><D=
IV><FONT=3D3D<BR>>>>> =20
>=3D3D20<BR>>>>> > =20
face=3D3D3D3DArial=3D3D20<BR>>>>> > =20
=
size=3D3D3D3D2>Tom</FONT></DIV&a mp;gt;<BR>><DIV>&l=
t;FONT=3D3D20<BR>>>>> =20
> face=3D3D3D3DArial size=3D3D3D3D2></FONT>=20
=3D3D<BR>>>>> =20
=
></DIV><BR>>&l t;DIV><FONT=3D3D20 <BR>>>>&=
gt; =20
> face=3D3D3D3DArial size=3D3D3D3D2></FONT>=20
=3D3D<BR>>>>> =20
=
></DIV><BR>>&l t;DIV><FONT=3D3D20 <BR>>>>&=
gt; =20
> size=3D3D3D3D2><BR><BR>I choose Polesoft =
Lockspam to=20
fight =3D3D<BR>>>>> =
>spam,=3D3D20<BR>>>>> =20
> =3D3D<BR>>>>> =20
=
>=3D3D3D<BR>>and=3D3D3D20< ;BR>>you?<BR><A=3D=
3D3D20<BR>>href=3D3D3D3D"<A=3D3D20 <BR>>>>> =
> =3D3D<BR>>>>> =20
=
=3D<BR>>>>>>href=3D3D3D'http://www.polesoft.com/refer.html=
">http://www.polesoft.com/re=3D<BR>>>>>fer=3D3D<BR>>>=
;>> =20
=
=3D<BR>>>>>>'>http://www.polesoft.com/refer.html">ht=
tp://www.polesoft.com/refer</A=3D3D=3D<BR>>>>><BR>>>=
>> =20
=
>>=3D3D3D<BR>>.html&l t;/A>=3D3D20 <BR>>>>>&n=
bsp;=20
> =3D3D<BR>>>>> =20
=
></FONT></DIV></BO DY></HTML><BR>>&am p;lt;=
BR>><BR></=3D3D<BR>>>>> =20
>BLOCKQUOTE></BODY></HTML > <BR>>>>> =
><BR>>>>> =20
=
><BR>>>>><BR>>>>> <BR>>>>><!DOCT=
YPE=20
HTML PUBLIC "-//W3C//DTD HTML 4.0=20
=
Transitional//EN"><BR> >>>><HTML>< HEAD> <BR>>=
>>><META=20
http-equiv=3D3DContent-Type content=3D3D"text/html;=20
=
=3D<BR>>>>>charset=3D3Diso-8859-1 "><BR>>>>><=
;META=20
content=3D3D"MSHTML 6.00.2800.1400"=20
=
name=3D3DGENERATOR><BR> >>>><STYLE>< ;/STYLE> <BR>=
>>>></HEAD><BR>>>>><BODY=20
bgColor=3D3D#ffffff><BR> >>>><DIV><F ONT =
face=3D3DArial=20
size=3D3D2>What do you guys=20
think,</FONT></DIV><BR> >>>><DIV><F ONT =
face=3D3DArial size=3D3D2>What are my chances of getting two=20
442s<BR>>>> =3D<BR>>>>>in=20
=
the=3D20<BR> >>>>mix</FONT>& ;lt;/DIV> <BR>>>>&=
gt;<DIV><FONT=20
face=3D3DArial size=3D3D2>without my Mecs losing some=20
of=3D20<BR>>>>>their=20
cards?</FONT></DIV><BR> >>>><DIV><F ONT =
face=3D3DArial=20
=
size=3D3D2>T.</FONT></DIV> ; <BR>>>>><DIV>&=
lt;FONT=20
face=3D3DArial size=3D3D2></FONT>=20
=
</DIV><BR>>>>><BLOCKQUOTE=3D20 <BR>>>>>st=
yle=3D3D"PADDING-RIGHT:=20
0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
=3D<BR>>>>>BORDER-LEFT:=20
#000000 2px solid; MARGIN-RIGHT: 0px"><BR>>>>> =20
<DIV>"Rod Lincoln" <<A=3D20<BR>>>>> =20
=3D<BR>>>>>href=3D3D"<A=20
=
href=3D'mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&a=
mp;g'>mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</=
A>&g</A>=3D<BR>>>>>t;=3D20 <BR>>>>> =20
wrote in message <A=3D20<BR>>>>> =20
=3D<BR>>>>>href=3D3D"<A=20
=
href=3D'news:46453f51$1@linux">news:46453f51$1@linux</A>...</DIV><BR>Mec'=
>news:46453f51$1@linux">news:46453f51$1@linux</A>...</DIV>=
<BR>Mec</A><BR>>>>=20
=3D<BR>>>>>1 on=3D20<BR>>>>> card A, 442 =
on Card B,=20
Mec 2 on Card F (my last card)<BR>I'm running<BR>>=20
=3D<BR>>>>>spdif out=3D20<BR>>>>> of Mec =
1 to a DAC=20
1<BR>Rod<BR>"Tom Bruhl" =
<<A=3D20<BR>>>>> =20
href=3D3D"<A=20
=
href=3D'mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20'>mailto=
:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20</A><BR>&g=
t;>>> =20
wrote:<BR>><BR>>&a mp;lt;BR>>Hey =
Rod,<BR>>That=20
sounds =3D<BR>>>>>promising. =
=3D20<BR>>>>> What=20
cards do you have the<BR>>Mecs and 442=20
connected=3D20<BR>>>>> =20
to?<BR>>Tom<BR>>&a mp;lt;BR>><BR>> "Rod =
Lincoln"=20
<<A=3D20<BR>>>>> =
=3D<BR>>>>>href=3D3D"<A=20
=
href=3D'mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&a=
mp;g'>mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</=
A>&g</A>=3D<BR>>>>>t;=3D20 <BR>>>>> =20
wrote in message=20
=
=3D<BR> >>>>=3D3D<BR>& gt;news:46451438$1@linux...<BR&=
gt;><BR>>=20
I've=3D20<BR>>>>> got 2 mecs and a 442 working here, =
no=20
problems at all.<BR>> =3D<BR>>>>>I'm=20
also=3D20<BR>>>>> clocking with the old Lucid genX =
word clock.=20
5 modules in=3D20<BR>>>>> =20
one<BR>=3D3D<BR>>mec,& ;lt;BR>> 4 modules in the =
other. 1=20
adat =3D<BR>>>>>card each. =
6=3D20<BR>>>>> eds cards,=20
3 UAD cards, =3D3D<BR>>all in<BR>> a magma. Oh=20
=3D<BR>>>>>yeah, a Lynx=3D20<BR>>>>> one =
in the=20
computer also.<BR>> Rod<BR>> "Tom Bruhl"=20
=3D<BR>>>>><<A=3D20 <BR>>>>> =
href=3D3D"<A=20
=
href=3D'mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20'>mailto=
:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20</A><BR>&g=
t;>>> =20
wrote:<BR>> ><BR>> ><BR>> >I'll be =
=3D<BR>>>>>buying=3D20<BR>>>>> either =
two MECs or=20
two 442s but don't want it<BR>> >to =
=3D<BR>>>>>mess=20
my=3D20<BR>>>>> whole rig up if the 442s don't play=20
nice.<BR>> >I am using=20
=3D<BR>>>>>an=3D20<BR>>>>> older Lucid =
clock now=20
with 2 Mecs already.<BR>> >They each=20
=3D<BR>>>>>have=3D20<BR>>>>> five =
modules in them.=20
The others may<BR>> >see a =3D<BR>>>>>single=20
ADAT=3D20<BR>>>>> at most someday =
maybe.<BR>>=20
><BR>> >I can make=20
=3D<BR>>>>>the=3D20<BR>>>>> MECs fit in =
the machine=20
room with the others<BR>> >but the=20
=3D<BR>>>>>442s=3D20<BR>>>>> would be a =
lot=20
easier.<BR>> ><BR>> >Anyone=20
=3D<BR>>>>>know=3D20<BR>>>>> =
Deej?<BR>>=20
><BR>> >Also I have to find the pin=20
=3D<BR>>>>>config=3D20<BR>>>>> for a 56 =
pin=20
EDAC/ELCO ADAT<BR>> >connector. I want =
=3D<BR>>>>>to=20
chop=3D20<BR>>>>> this bad boy off and solder 16=20
TRS<BR>> >to it. =3D<BR>>>>>Anyone=20
know=3D20<BR>>>>> whether the ADAT wiring is =
different=20
than<BR>> =3D20<BR>>>>> =
>standard?<BR>>=20
>Thanks,<BR>> =3D<BR> >>>>>Tom<BR> ;> =
=3D20<BR>>>>> ><BR>> ><BR>>=20
><BR>> =3D<BR> >>>>><BR>&a mp;gt;=20
=3D20<BR>>>>> >I choose Polesoft Lockspam to =
fight spam,=20
and you?<BR>> =3D20<BR>>>>> =20
>http://www.polesoft.com/refer.html =3D3D20<BR>>=20
=3D20<BR>>>>> ><BR>> ><!DOCTYPE =
HTML PUBLIC=20
"-//W3C//DTD HTML 4.0=3D20<BR>>>>> =20
Transitional//EN"><BR>>=20
=3D<BR> >>>>><HTML> <HEAD><BR>>=20
=3D20<BR>>>>> ><META =
http-equiv=3D3D3D3DContent-Type=20
content=3D3D3D3D"text/html;=3D20<BR>>>>> =
=3D3D3D<BR>>=20
>charset=3D3D3D3Diso-8859-1"><BR>>=20
=3D<BR>>>>>><META=3D20 <BR>>>>> =20
content=3D3D3D3D"MSHTML 6.00.2800.1400"=20
=3D<BR> >>>>name=3D3D3D3DGENERATOR&g t;<BR>>=20
=3D20<BR>>>>> =
><STYLE></STYLE><B R>>=20
=3D<BR> >>>>></HEAD> ;<BR>>=20
=3D20<BR>>>>> ><BODY=20
bgColor=3D3D3D3D#ffffff><BR>>=20
=
=3D<BR> >>>>><DIV>& amp;lt;FONT=3D20 <BR>>>>>&n=
bsp;=20
face=3D3D3D3DArial size=3D3D3D3D2>I'll be buying either two MECs=20
=3D<BR> >>>>=3D3D<BR>& gt;or =
two=3D20<BR>>>>> =20
=3D3D3D<BR>> >442s but=3D3D3D20<BR>> >don't=20
want=3D20<BR>>>>> =
it</FONT></DIV><BR> ;>=20
><DIV><FONT=3D20<BR>>>>> =
face=3D3D3D3DArial=20
size=3D3D3D3D2>to mess my whole rig up if the=20
=
=3D<BR> >>>>=3D3D<BR>& gt;442s=3D20 <BR>>>>>&n=
bsp;=20
=3D3D3D<BR>> >don't play=3D3D3D20<BR>>=20
=3D20<BR>>>>> =
>nice.</FONT></DIV>&l t;BR>>=20
=
=3D<BR> >>>>><DIV>& amp;lt;FONT=3D20 <BR>>>>>&n=
bsp;=20
face=3D3D3D3DArial size=3D3D3D3D2>I am using an older Lucid=20
=
=3D<BR> >>>>clock<BR>=3D3D <BR>>now=3D20 <BR>>=
>>> =20
=3D3D3D<BR>> >with 2 Mecs=3D3D3D20<BR>>=20
=3D20<BR>>>>> =20
>already.</FONT></DIV>&am p;lt;BR>>=20
=
=3D<BR> >>>>><DIV>& amp;lt;FONT=3D20 <BR>>>>>&n=
bsp;=20
face=3D3D3D3DArial size=3D3D3D3D2>They each have five modules=20
in=3D20<BR>>>>> =
=3D3D<BR>>=3D3D3D<BR>& ;gt; >them.=20
The=3D3D3D20<BR>>=20
=3D<BR>>>>>>others=3D20 <BR>>>>> =20
may</FONT></DIV><BR&g t;>=20
><DIV><FONT=3D20<BR>>>>> =
face=3D3D3D3DArial=20
size=3D3D3D3D2>see a single ADAT at =
most=3D20<BR>>>>> =20
=3D3D<BR>>someday=3D3D3D20<BR&am p;gt;> =
=3D20<BR>>>>> =20
>maybe.</FONT></DIV>& lt;BR>>=20
=
=3D<BR> >>>>><DIV>& amp;lt;FONT=3D20 <BR>>>>>&n=
bsp;=20
face=3D3D3D3DArial size=3D3D3D3D2></FONT>=20
=3D<BR> >>>></DIV>< BR>> =
=3D20<BR>>>>> =20
><DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>I can =
make=20
=3D<BR>>>>>the MECs fit=3D20<BR>>>>> in =
the=20
=3D3D<BR>>machine<BR>& ;gt; =3D3D3D<BR>>=20
>room=3D20<BR>>>>> with=3D3D3D20<BR>> =
>the=20
=3D<BR> >>>>others</FONT>& amp;lt;/DIV><BR>>=20
=3D20<BR>>>>> ><DIV><FONT =
face=3D3D3D3DArial=20
size=3D3D3D3D2>but the 442s =3D<BR>>>>>would=20
be=3D20<BR>>>>> =
=3D3D<BR>></FONT>< FONT=20
=3D3D3D<BR>> =3D20<BR>>>>> =20
>face=3D3D3D3DArial=3D3D3D20<BR>> ; >size=3D3D3D3D2>a=20
lot=3D20<BR>>>>> =20
easier.</FONT></DIV><BR&a mp;gt;> ><DIV><FONT =
=3D<BR>>>>><BR>>>>> face=3D3D3D3DArial=20
size=3D3D3D3D2></FONT> =
=3D<BR> >>>></DIV>< BR>>=20
=3D20<BR>>>>> ><DIV><FONT =
face=3D3D3D3DArial=20
size=3D3D3D3D2>Anyone know=3D20<BR>>>>> =20
Deej?</FONT></DIV><BR& ;gt;>=20
><DIV><FONT=3D20<BR>>>>> =
face=3D3D3D3DArial=20
size=3D3D3D3D2></FONT> =
=3D<BR> >>>></DIV>< BR>>=20
=3D20<BR>>>>> ><DIV><FONT =
face=3D3D3D3DArial=20
size=3D3D3D3D2>Also I have =3D<BR>>>>>to find=20
the=3D20<BR>>>>> pin =3D3D<BR>>config =
for<BR>>=20
=3D3D3D<BR>> >a 56=3D20<BR>>>>> =20
pin=3D3D3D20<BR>> =
>EDAC/ELCO=3D20<BR>>>>> =20
ADAT</FONT></DIV><BR& gt;>=20
><DIV><FONT=3D20<BR>>>>> =
face=3D3D3D3DArial=20
size=3D3D3D3D2>connector. I want to chop =
this=3D20<BR>>>>> =20
=3D3D<BR>>=3D3D3D<BR>& ;gt; >bad boy =
off=3D3D3D20<BR>>=20
=3D<BR>>>>>>and solder=3D20<BR>>>>> =
16=20
TRS</FONT></DIV><BR&g t;>=20
><DIV><FONT=3D20<BR>>>>> =
face=3D3D3D3DArial=20
size=3D3D3D3D2>to it. Anyone know whether =
the=3D20<BR>>>>> =20
=3D3D<BR>>=3D3D3D<BR>& ;gt; >ADAT wiring =
is=3D3D3D20<BR>>=20
=3D<BR>>>>>>different=3D20 <BR>>>>> =20
than</FONT></DIV><BR& gt;>=20
><DIV><FONT=3D20<BR>>>>> =
face=3D3D3D3DArial=20
=
=3D<BR> >>>>size=3D3D3D3D2>standa rd?</FONT></DIV&g=
t;<BR>>=20
=3D20<BR>>>>> ><DIV><FONT=20
face=3D3D3D3DArial=3D20<BR>>>>> =20
size=3D3D3D3D2>Thanks,</FONT></D IV><BR>>=20
=3D20<BR>>>>> ><DIV><FONT=20
face=3D3D3D3DArial=3D20<BR>>>>> =20
size=3D3D3D3D2>Tom</FONT></DIV&a mp;gt;<BR>>=20
=3D20<BR>>>>> ><DIV><FONT =
face=3D3D3D3DArial=20
size=3D3D3D3D2></FONT> =
=3D<BR>>>>><BR>>>>> =20
</DIV><BR>> ><DIV><FONT=20
face=3D3D3D3DArial=3D20<BR>>>>> =
size=3D3D3D3D2></FONT>=20
</DIV><BR>>=20
=
=3D<BR> >>>>><DIV>& amp;lt;FONT=3D20 <BR>>>>>&n=
bsp;=20
size=3D3D3D3D2><BR><BR>I choose Polesoft Lockspam to=20
=3D<BR>>>>>fight=3D20<BR>>>>> =
=3D3D<BR>>spam,=20
=3D3D3D<BR>> >and=3D3D3D20<BR>> =
=3D20<BR>>>>> =20
>you?<BR><A=3D3D3D20<BR&a mp;gt;>=20
=
=3D<BR> >>>>=3D3D<BR>& gt;>href=3D3D3D3D "<A=3D20<BR=
>>>>> =20
=
=3D<BR>>>>>href=3D3D'http://www.polesoft.com/refer.html">h=
ttp://www.polesoft.com/re'>h=3D<BR>>>>>ttp://www.polesoft.=
com/refer.html">http://www.polesoft.com/re</A>=3D3D<B=3D<BR>&=
gt;>>>R>>fer=3D3D3D&l t;BR>>=20
=3D20<BR>>>>> =
>.html</A>=3D20<BR>>>>> =20
</FONT></DIV></BODY&g t;</HTML><BR>>=20
=3D20<BR>>>>> ><BR>>=20
><BR>><BR>> <BR>><!DOCTYPE HTML=20
=3D<BR>>>>>PUBLIC=3D20<BR>>>>> =
"-//W3C//DTD HTML=20
4.0=3D20<BR>>>>> =20
=
Transitional//EN" ><BR>><HTML>&l t;HEAD><BR>>=
<META=3D20<BR>>>>> =20
http-equiv=3D3D3DContent-Type=20
content=3D3D3D"text/html;=3D20<BR>>>>> =20
=3D3D<BR>>charset=3D3D3Diso-8859-1"><BR>><META =
=
=3D<BR>>>>>content=3D3D3D"MSHTML=3D20 <BR>>>>>&nbs=
p;=20
6.00.2800.1400"=3D20<BR>>>>> =20
=
=3D<BR> >>>>name=3D3D3DGENERATOR> <BR>><STYLE>=
;</STYLE><BR>></HE A=3D <BR>>>>>D><BR&g=
t;><BODY=3D20<BR>>>>> =20
bgColor=3D3D3D#ffffff><BR>>& lt;DIV><FONT =
face=3D3D3DArial=20
=
=3D<BR> >>>>size=3D3D3D2>Hey=3D20 <BR>>>>> =
=20
Rod,</FONT></DIV><BR& gt;><DIV><FONT=20
=3D<BR>>>>>face=3D3D3DArial=3D20 <BR>>>>> =
size=3D3D3D2>That sounds promising. What cards =
=3D3D<BR>>do=20
you=3D20<BR>>>>> =20
=
=3D<BR> >>>>have=3D3D20<BR> ;>the</FONT></DIV&=
gt;<BR>><DIV><FONT =20
=3D<BR>>>>><BR>>>>> face=3D3D3DArial=20
size=3D3D3D2>Mecs and 442 connected=3D20<BR>>>>> =20
to?</FONT></DIV><BR&g t;><DIV><FONT =
face=3D3D3DArial=20
=3D<BR>>>>><BR>>>>> =20
=
size=3D3D3D2>Tom</FONT></DIV& ;gt;<BR>><DIV><=
FONT=3D20<BR>>>>> =20
face=3D3D3DArial size=3D3D3D2></FONT>=20
=
=3D<BR> >>>></DIV>< BR>><DIV>=3D20 <BR>>=
>>> =20
=
=3D<BR> >>>></DIV>< BR>><BLOCKQUOTE=3D3D20<=
;BR>>style=3D3D3D"PADDING-RIGHT:=20
=3D<BR>>>>>0px;=3D20<BR>>>>> =
PADDING-LEFT: 5px;=20
MARGIN-LEFT: 5px; =3D3D<BR>>BORDER-LEFT: #000000=20
=3D<BR>>>>>2px solid;=3D20<BR>>>>> =
MARGIN-RIGHT:=20
0px"><BR>> <DIV>"Rod =
Lincoln"=3D20<BR>>>>> =20
<<A=3D3D20<BR>>=20
=3D3D<BR>>href=3D3D3D"<A=3D20<BR >>>>> =20
=
=3D<BR>>>>>href=3D3D'mailto:rlincoln@nospam.kc.rr.com">rli=
ncoln@nospam.kc.rr.com</A>&a=3D<BR>>>>>mp;g'>mai=
lto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</=3D<BR>&g=
t;>>>A>&g</A& gt;=3D3D<BR>>t;=3D3D20<BR> ;=
>=20
=3D20<BR>>>>> wrote in message =
<A=3D3D20<BR>>=20
=3D3D<BR>>href=3D3D3D"<A=3D20<BR >>>>> =20
=3D<BR>>>>>href=3D3D"<A=20
=
href=3D'news:46451438$1@linux">news:46451438$1@linux</A>...</DIV><BR'>new=
s:46451438$1@linux">news:46451438$1@linux</A>...</DIV><=
BR</A>=3D<BR>>>>>>I've ">news:46451438$1@linux">news:=
46451438$1@linux</A>...</D=3D<BR> >>>>IV><BR>=
;I've</A>=3D3D<BR>>=3D20<BR >>>>> =20
got 2=3D3D20<BR>> mecs and a 442 working here, no problems=20
at=3D20<BR>>>>> all.<BR>I'm also=20
clocking<BR>=3D3D<BR>>wit h=20
=3D<BR> >>>>the=3D3D20<BR> > =
old=3D20<BR>>>>> =20
Lucid genX word clock. 5 modules in one mec,<BR>4 modules in the =
=3D<BR>>>>><BR>>>>> =
=3D3D<BR>>other.=20
1=3D3D20<BR>> adat card each. 6 eds cards, 3 =
=3D<BR>>>>>UAD=20
cards,=3D20<BR>>>>> all in<BR>a magma. Oh=20
yeah,<BR>=3D3D<BR>>a =
=3D<BR> >>>>Lynx=3D3D20<BR> ;>=20
one in=3D20<BR>>>>> the computer=20
also.<BR>Rod<BR>"Tom Bruhl"=3D20<BR>>>>> =
<<A=3D3D20<BR>> =
href=3D3D3D"<A=3D20<BR>>>>> =20
=
=3D<BR>>>>>href=3D3D'mailto:arpegio@comcast.net">arpegio@c=
omcast.net</A>>=3D3D20'>mailto=3 D <BR>>>>>:arpegio=
@comcast.net">arpegio@comcast.net </A>>=3D3D20</A><B R=
>&g=3D<BR>>>>>t;=20
=3D20<BR>>>>> =20
wrote:<BR>><BR>>&a mp;lt;BR>>I'll be buying either=20
=3D<BR>>>>>two MECs=3D20<BR>>>>> or two=20
=3D3D<BR>>442s but=3D3D20<BR>> don't want=20
=3D<BR> >>>>it<BR>> to =
mess=3D20<BR>>>>> my=20
whole rig up if the 442s don't play=3D3D20<BR>>=20
=
=3D<BR> >>>>nice.<BR>& gt;I=3D20 <BR>>>>> =
; am=20
using an older Lucid clock now with 2 Mecs=3D3D20<BR>>=20
=3D20<BR>>>>> already.<BR>>They each have =
five=20
modules in them. The=3D20<BR>>>>> =
others=3D3D20<BR>>=20
may<BR>>see a single ADAT at most=20
=3D<BR>>>>>someday=3D20<BR>>>>> =20
maybe.<BR>><BR>>I =3D3D<BR>>can=20
=3D<BR> >>>>make=3D3D20<BR> ;> =
the=3D20<BR>>>>> =20
MECs fit in the machine room with the others<BR>>but the 442s =
=3D<BR>>>>><BR>>>>> =
=3D3D<BR>>would=20
be=3D3D20<BR>> a lot=3D20<BR>>>>> =20
easier.<BR>><BR>>A nyone =
know=3D20<BR>>>>> =20
Deej?<BR>><BR>>Als o I =3D3D<BR>>have=20
=3D<BR> >>>>to=3D3D20<BR>& amp;gt; =
find=3D20<BR>>>>> =20
the pin config for a 56 pin EDAC/ELCO=20
=3D<BR> >>>>=3D3D<BR>& gt;ADAT<BR>>connector. =
I=3D20<BR>>>>> want=3D3D20<BR>> to chop =
this bad boy=20
off and solder 16=3D20<BR>>>>> TRS<BR>>to =
it. Anyone=20
=3D3D<BR>>know=3D3D20<BR> > =
=3D<BR>>>>>whether the=20
ADAT=3D20<BR>>>>> wiring is =
different=3D3D20<BR>>=20
=3D20<BR>>>>> =20
=
=3D<BR> >>>>=3D3D<BR>& gt;than<BR>>standard?<=
BR>>Thanks,<BR>>=3D<BR> >>>>Tom<BR>> ;&l=
t;BR>><BR>><B=3D3D <BR>>R>><=3D <BR>>=
;>>>;BR>>I=3D3D20< BR>>=20
=3D20<BR>>>>> choose Polesoft Lockspam to fight =
spam,=20
and=3D3D20<BR>> =3D20<BR>>>>> =20
you?<BR>>http://www.polesoft.com/refer.html=20
=3D<BR> >>>>=3D3D20<BR>&am p;gt; =
=3D20<BR>>>>> =20
<BR>><BR>>< !DOCTYPE HTML PUBLIC "-//W3C//DTD HTML =
=3D<BR>>>>><BR>>>>> =
4.0=3D3D20<BR>>=20
=3D20<BR>>>>> =20
=
=3D<BR>>>>>Transitional//EN" ><BR>><HTML>&l t=
;HEAD><BR>>=3D<BR> >>>><META=3D3D20<B R>&g=
t;=20
=3D20<BR>>>>> http-equiv=3D3D3D3DContent-Type=20
=
=3D<BR>>>>>content=3D3D3D3D"text/html;=3D3D20<BR>>=20
=3D20<BR>>>>> =20
=
=3D3D3D<BR>>charset=3D3D3D3Diso-8859-1"><BR>><MET=
A=20
=3D<BR>>>>><BR>>>>> =20
=3D3D<BR>>content=3D3D3D3D"MSHTML=3D3D20<BR>>=20
=3D<BR>>>>>6.00.2800.1400"=3D3D20<BR>>=20
=3D20<BR>>>>> =20
=
=3D<BR> >>>>=3D3D<BR>& gt;name=3D3D3D3DGENERATOR><B=
R>><STYLE></STYLE& ;=3D <BR>>>>>gt;<BR>=
></HEA=3D3D<BR>>D> <BR>><BODY=3D3D20<BR& g=
t;&=3D<BR>>>>>gt;=20
=3D20<BR>>>>> =20
bgColor=3D3D3D3D#ffffff><BR>>&am p;lt;DIV><FONT=20
=
=3D<BR>>>>>face=3D3D3D3DArial=3D20 <BR>>>>> =
=3D3D<BR>>size=3D3D3D3D2>I'll=3D 3D20<BR>> be =
buying either=20
=3D<BR>>>>>two MECs or two=3D20<BR>>>>> =20
=3D3D3D<BR>>442s=20
but=3D3D3D20<BR>>don't=3D20<BR>>>>> =20
=3D3D<BR>>want=3D3D20<BR> > =
=3D20<BR>>>>> =20
=
it</FONT></DIV><BR> ;><DIV><FONT=3D20 <BR>>=
>>> =20
face=3D3D3D3DArial=3D3D20<BR>> size=3D3D3D3D2>to mess my =
whole=20
=3D<BR>>>>>rig up if the=3D20<BR>>>>> =
442s=20
=3D3D3D<BR>>don't=3D3D20<BR& gt;> =
=3D20<BR>>>>> =20
=
=3D<BR> >>>>=3D3D<BR>& gt;play=3D3D3D20<BR>>nice=
..</FONT></DIV><BR&am p;=3D <BR>>>>>gt;><DI=
V><FON=3D3D<BR>>T=3D3D20& amp;lt;BR>>=20
=3D20<BR>>>>> face=3D3D3D3DArial size=3D3D3D3D2>I =
am using an=20
older Lucid clock now=3D20<BR>>>>> =20
=3D3D<BR>>=3D3D3D<BR>& ;gt;with 2=3D3D20<BR>>=20
=3D20<BR>>>>> =
=3D<BR>>>>><BR>>>>=20
=
=3D3D<BR>>Mecs=3D3D3D20<BR&g t;>already.</FONT></D=
IV><=3D<BR> >>>>BR>><DI V><=3D3D<BR>=
>FONT=3D3D20<BR>>=20
=3D20<BR>>>>> face=3D3D3D3DArial =
size=3D3D3D3D2>They each have=20
five modules in=3D20<BR>>>>> =20
=3D3D<BR>>=3D3D3D<BR>& ;gt;them.=3D3D20<BR>>=20
=
=3D<BR> >>>>The=3D3D3D20<BR&g t;>others=3D20 <BR>>>&=
gt;> =20
=
=3D<BR> >>>>=3D3D<BR>& gt;may</FONT></DIV><=
;BR>><DIV><FONT=3D3D=3D<BR > >>>>20<BR>>=
;=20
=3D20<BR>>>>> face=3D3D3D3DArial =
size=3D3D3D3D2>see a single=20
ADAT at =3D<BR> >>>>most=3D3D20<BR> ;>=20
=3D20<BR>>>>> =20
=
=3D<BR> >>>>=3D3D<BR>& gt;someday=3D3D3D20<BR>>m=
aybe.</FONT></DIV><=3D<BR > >>>>;BR>><D =
IV><=3D3D<BR>>;FONT=3D3D2 0<BR>>=20
=3D20<BR>>>>> face=3D3D3D3DArial=20
size=3D3D3D3D2></FONT>=3D20<BR>>>>> =20
=
=3D<BR> >>>>=3D3D<BR>& gt;</DIV><BR>><D=
IV><FONT=3D3D20<BR>>& amp;nbs=3D <BR>>>>>p;=3D20=
<BR>>>>> =20
face=3D3D3D3DArial size=3D3D3D3D2>I can make the MECs fit in=20
=3D<BR> >>>>the=3D3D20<BR> > =
=3D20<BR>>>>> =20
=
machine<BR>=3D3D3D<BR>>ro om=3D20 <BR>>>>> =
=20
with=3D3D3D20<BR>>the=3D3D20<BR& amp;gt;> =
=3D20<BR>>>>> =20
=
others</FONT></DIV><BR&am p;gt;><DIV><FONT=3D20 <BR>=
>>>> =20
=3D3D<BR>>face=3D3D3D3DArial=3D3D20& ;lt;BR>> =
size=3D3D3D3D2>but the=20
=3D<BR>>>>>442s would be=3D20<BR>>>>> =20
</FONT><FONT=3D3D20<BR>&a mp;gt; =
=3D20<BR>>>>> =20
=
=3D<BR> >>>>=3D3D3D<BR>&am p;gt;face=3D3D3D3DArial=3D3D3D20&l=
t;BR>>size=3D3D3D3D2>a=3D<BR>>>>>=3D20 <BR>>>&g=
t;> =20
lot=3D3D20<BR>> =3D20<BR>>>>> =20
=
easier.</FONT></DIV><BR&a mp;gt;><DIV><FONT=3D20 <BR=
>>>>> =20
=3D3D<BR>>face=3D3D3D3DArial=3D3D20& ;lt;BR>>=20
=
=3D<BR> >>>>size=3D3D3D3D2>&l t;/FONT>=3D20 <BR>>>&g=
t;> =20
=
</DIV><BR>><DIV&am p;gt;<FONT=3D20 <BR>>>>>&nb=
sp;=20
=3D3D<BR>>face=3D3D3D3DArial=3D3D20& ;lt;BR>>=20
size=3D3D3D3D2>Anyone=3D20<BR>>>>> =
know=3D3D20<BR>>=20
=3D20<BR>>>>> =20
=
Deej?</FONT></DIV><BR& ;gt;><DIV><FONT=3D20 <BR>&=
gt;>>> =20
=3D3D<BR>>face=3D3D3D3DArial=3D3D20& ;lt;BR>>=20
=
=3D<BR> >>>>size=3D3D3D3D2>&l t;/FONT>=3D20 <BR>>>&g=
t;> =20
=
</DIV><BR>><DIV&am p;gt;<FONT=3D20 <BR>>>>>&nb=
sp;=20
=3D3D<BR>>face=3D3D3D3DArial=3D3D20& ;lt;BR>> =
size=3D3D3D3D2>Also I=20
=3D<BR>>>>>have to find the=3D20<BR>>>>> =
pin config=20
for<BR>=3D3D3D<BR>>a=20
=3D<BR> >>>>=3D3D<BR>& gt;56=3D3D20<BR>>=20
=3D20<BR>>>>> =20
pin=3D3D3D20<BR>>EDAC/ELCO=3D3D20&l t;BR>>=20
=3D20<BR>>>>> =20
=
ADAT</FONT></DIV><BR& gt;><DIV><FONT=3D20 <BR>&g=
t;>>> =20
=3D3D<BR>>face=3D3D3D3DArial=3D3D20& ;lt;BR>>=20
=3D<BR> >>>>size=3D3D3D3D2>connec tor. I want=20
to=3D20<BR>>>>> chop this =3D3D3D<BR>>bad=20
boy=3D20<BR>>>>> =20
=3D3D<BR>>off=3D3D3D20<BR> ;>and=3D3D20<BR>> =
solder=20
16=3D20<BR>>>>> =20
=
TRS</FONT></DIV><BR&g t;><DIV><FONT=3D20 <BR>>=
;>>> =20
=3D3D<BR>>face=3D3D3D3DArial=3D3D20& ;lt;BR>> =
size=3D3D3D3D2>to it.=20
=3D<BR>>>>>Anyone know=3D20<BR>>>>> =
whether the=20
=3D3D3D<BR>>ADAT wiring=3D3D20<BR>>=20
=3D20<BR>>>>> =20
is=3D3D3D20<BR>>different=3D3D20< ;BR>>=20
=3D20<BR>>>>> =20
=
than</FONT></DIV><BR& gt;><DIV><FONT=3D20 <BR>&g=
t;>>> =20
=3D3D<BR>>face=3D3D3D3DArial=3D3D20& ;lt;BR>>=20
=3D20<BR>>>>> =20
=
=3D<BR> >>>>=3D3D<BR>& gt;size=3D3D3D3D2>standard?<=
/FONT></DIV><BR>& g=3D <BR>>>>>t;<DIV>=
<FO=3D3D<BR>>NT=3D3D20<BR >>=20
=3D20<BR>>>>> =
face=3D3D3D3DArial=3D3D20<BR>>=20
=3D20<BR>>>>> =20
=
=3D<BR> >>>>=3D3D<BR>& gt;size=3D3D3D3D2>Thanks,</F=
ONT></DIV><BR>>=3D <BR> >>>><DIV><F O=
NT=3D3D<BR>>=3D3D20<BR>&a mp;gt;=20
=3D20<BR>>>>> =
face=3D3D3D3DArial=3D3D20<BR>>=20
=3D20<BR>>>>> =20
=
=3D<BR> >>>>size=3D3D3D3D2>Tom&am p;lt;/FONT></DIV><=
BR>><DIV><=3D<BR> >>>>FONT=3D3D20<BR> ;>=
=20
=3D20<BR>>>>> face=3D3D3D3DArial=20
size=3D3D3D3D2></FONT>=3D20<BR>>>>> =20
=
=3D<BR> >>>>=3D3D<BR>& gt;</DIV><BR>><D=
IV><FONT=3D3D20<BR>>& amp;nbs=3D <BR>>>>>p;=3D20=
<BR>>>>> =20
face=3D3D3D3DArial =
size=3D3D3D3D2></FONT>=3D20<BR>>>>> =20
=
=3D<BR> >>>>=3D3D<BR>& gt;</DIV><BR>><D=
IV><FONT=3D3D20<BR>>& amp;nbs=3D <BR>>>>>p;=3D20=
<BR>>>>> =20
size=3D3D3D3D2><BR><BR>I choose Polesoft Lockspam to=20
=3D<BR>>>>>fight=3D20<BR>>>>> =20
=3D3D<BR>>spam,=3D3D20<BR> ;> =
=3D20<BR>>>>> =20
=
=3D<BR> >>>>=3D3D<BR>& gt;=3D3D3D<BR>>and=3D3D3D=
20<BR>>you?<BR><A= 3D <BR>>>>>=3D3D3D20<BR=
>>href=3D3D3D3D"<A=3D3D20<BR>>=20
=3D20<BR>>>>> =20
=
=3D<BR> >>>>=3D3D<BR>& gt;href=3D3D3D'http://www.polesoft=
..com/refer.html">http://www.po=3D<BR>>>>>lesoft.com/refer=3D=
3D<BR>>'>http://www.polesoft.com/refer.html">ht=3D<BR>>=
>>>tp://www.polesoft.com/refer</A=3D3D<BR>>>=3D3D=
3D<BR>>.html&=3D<BR> >>>>lt;/A>=3D3D20< BR&g=
t;>=20
=3D20<BR>>>>> =20
=
=3D<BR> >>>>=3D3D<BR>& gt;</FONT></DIV></B=
ODY></HTML><BR>&= 3D <BR> >>>>gt;<BR>&g=
t;<BR></=3D3D<BR>> BLOCKQUOTE></BODY><=3D <BR=
> >>>>;/HTML><BR& ;gt;><BR>><BR>& ;lt;/BLO=
CKQUOTE></BODY></HTML><BR >>>>><BR>>>>=
><BR>>>><BR>>> <BR>>><BR>>=20
<BR><BR></BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_0013_01C794B9.CDE36180--
|
|
|
|
| Re: Paris 3.0/XP MECs and 442s work nicely or no? Also Elco pin out. . . [message #84415 is a reply to message #84410] |
Sat, 12 May 2007 15:31 |
Rod Lincoln
Messages: 883
Registered: September 2005
|
Senior Member |
|
|
I have two A8it's, one A8ot, and an adat module in Mec A.
Rod
"DJ" <www.aarrrrggghhh!!!.com> wrote:
>Hmmmm...........maybe so. ;o) How many/what kind of I/O modules do you have
>in the MEC that is on Card A?
>
>"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message
>news:46462845$1@linux...
>>
>> My 442 works reliably off the B card. maybe DJ slapped some sense into
it.
>> ;-)
>> Rod
>> "DJ" <www.aarrrrggghhh!!!.com> wrote:
>>>IIRC 442's are initialized differently from the MEC and need to be hung
>> off
>>>Card A to work reliablein a multi interface setup. this will necessitate
>>
>>>using the 20 bit I/O for monitoring the mix.
>>>
>>>"Dimitrios" <musurgio@otenet.gr> wrote in message news:46456534$1@linux...
>>>>
>>>> Hi Tom,
>>>> When I tried this 442 and mec combination I only found a working clocked
>>>> system if 442 was a master so 20 bits versus 24 was inportant to me
for
>>
>>>> monitoring
>>>> ! (I still record only 16 bits !).
>>>> What though was evident is that I could NEVER have the ins and outs
of
>> 442
>>>> working correctly.
>>>> You know sometimes we use 442 along mec and we mostly don't use much
of
>>
>>>> 442
>>>> except for a spdif or something.
>>>> It would be nice if someone could CHECK that in a multi mec 442 system
>> ALL
>>>> 442's ins and outs along with mec's are working correctly.
>>>> I know this is much to ask but Tom (and I at least) would love that
kind
>>>> of testing info.
>>>> A 442 would be a great addition to me IF mec could be main card A and
>> all
>>>> ins and outs of everything would work.
>>>> Is this an XP problem or is it the same as in win98 or Me ?
>>>> Regards,
>>>> Dimitrios
>>>>
>>>> "Tom Bruhl" <arpegio@comcast.net> wrote:
>>>>>
>>>>>
>>>>>What do you guys think,
>>>>>What are my chances of getting two 442s in the mix
>>>>>without my Mecs losing some of their cards?
>>>>>T.
>>>>>
>>>>> "Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message =
>>>>>news:46453f51$1@linux...
>>>>>
>>>>> Mec 1 on card A, 442 on Card B, Mec 2 on Card F (my last card)
>>>>> I'm running spdif out of Mec 1 to a DAC 1
>>>>> Rod
>>>>> "Tom Bruhl" <arpegio@comcast.net> wrote:
>>>>> >
>>>>> >
>>>>> >Hey Rod,
>>>>> >That sounds promising. What cards do you have the
>>>>> >Mecs and 442 connected to?
>>>>> >Tom
>>>>> >
>>>>> >
>>>>> > "Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message =3D
>>>>> >news:46451438$1@linux...
>>>>> >
>>>>> > I've got 2 mecs and a 442 working here, no problems at all.
>>>>> > I'm also clocking with the old Lucid genX word clock. 5 modules
in
>>>> =
>>>>>one
>>>>> =3D
>>>>> >mec,
>>>>> > 4 modules in the other. 1 adat card each. 6 eds cards, 3 UAD cards,
>>>> =
>>>>>=3D
>>>>> >all in
>>>>> > a magma. Oh yeah, a Lynx one in the computer also.
>>>>> > Rod
>>>>> > "Tom Bruhl" <arpegio@comcast.net> wrote:
>>>>> > >
>>>>> > >
>>>>> > >I'll be buying either two MECs or two 442s but don't want it
>>>>> > >to mess my whole rig up if the 442s don't play nice.
>>>>> > >I am using an older Lucid clock now with 2 Mecs already.
>>>>> > >They each have five modules in them. The others may
>>>>> > >see a single ADAT at most someday maybe.
>>>>> > >
>>>>> > >I can make the MECs fit in the machine room with the others
>>>>> > >but the 442s would be a lot easier.
>>>>> > >
>>>>> > >Anyone know Deej?
>>>>> > >
>>>>> > >Also I have to find the pin config for a 56 pin EDAC/ELCO ADAT
>>>>> > >connector. I want to chop this bad boy off and solder 16 TRS
>>>>> > >to it. Anyone know whether the ADAT wiring is different than
>>>>> > >standard?
>>>>> > >Thanks,
>>>>> > >Tom
>>>>> > >
>>>>> > >
>>>>> > >
>>>>> > >
>>>>> > >I choose Polesoft Lockspam to fight spam, and you?
>>>>> > >http://www.polesoft.com/refer.html =3D20
>>>>> > >
>>>>> > ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
>>>>> > ><HTML><HEAD>
>>>>> > ><META http-equiv=3D3D3DContent-Type content=3D3D3D"text/html;
=
>>>>>=3D3D
>>>>> > >charset=3D3D3Diso-8859-1">
>>>>> > ><META content=3D3D3D"MSHTML 6.00.2800.1400" name=3D3D3DGENERATOR>
>>>>> > ><STYLE></STYLE>
>>>>> > ></HEAD>
>>>>> > ><BODY bgColor=3D3D3D#ffffff>
>>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>I'll be buying either
two
>>>> =
>>>>>MECs =3D
>>>>> >or two =3D3D
>>>>> > >442s but=3D3D20
>>>>> > >don't want it</FONT></DIV>
>>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>to mess my whole rig
up
>> =
>>>>>if the =3D
>>>>> >442s =3D3D
>>>>> > >don't play=3D3D20
>>>>> > >nice.</FONT></DIV>
>>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>I am using an older Lucid
>>>> =
>>>>>clock
>>>>> =3D
>>>>> >now =3D3D
>>>>> > >with 2 Mecs=3D3D20
>>>>> > >already.</FONT></DIV>
>>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>They each have five =
>>>>>modules in =3D
>>>>> >=3D3D
>>>>> > >them. The=3D3D20
>>>>> > >others may</FONT></DIV>
>>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>see a single ADAT at
most
>>>> =
>>>>>=3D
>>>>> >someday=3D3D20
>>>>> > >maybe.</FONT></DIV>
>>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
>>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>I can make the MECs fit
>> =
>>>>>in the =3D
>>>>> >machine
>>>>> > =3D3D
>>>>> > >room with=3D3D20
>>>>> > >the others</FONT></DIV>
>>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>but the 442s would be
=3D
>>>>> ></FONT><FONT =3D3D
>>>>> > >face=3D3D3DArial=3D3D20
>>>>> > >size=3D3D3D2>a lot easier.</FONT></DIV>
>>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
>>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Anyone know =
>>>>>Deej?</FONT></DIV>
>>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
>>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Also I have to find the
>> =
>>>>>pin =3D
>>>>> >config for
>>>>> > =3D3D
>>>>> > >a 56 pin=3D3D20
>>>>> > >EDAC/ELCO ADAT</FONT></DIV>
>>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>connector. I want to
chop
>>>> =
>>>>>this =3D
>>>>> >=3D3D
>>>>> > >bad boy off=3D3D20
>>>>> > >and solder 16 TRS</FONT></DIV>
>>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>to it. Anyone know =
>>>>>whether the =3D
>>>>> >=3D3D
>>>>> > >ADAT wiring is=3D3D20
>>>>> > >different than</FONT></DIV>
>>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>standard?</FONT></DIV>
>>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Thanks,</FONT></DIV>
>>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Tom</FONT></DIV>
>>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
>>>>> > ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> </DIV>
>>>>> > ><DIV><FONT size=3D3D3D2><BR><BR>I choose Polesoft Lockspam to
=
>>>>>fight =3D
>>>>> >spam, =3D3D
>>>>> > >and=3D3D20
>>>>> > >you?<BR><A=3D3D20
>>>>> > =3D
>>>>> =
>>>>>>>href=3D3D3D"http://www.polesoft.com/refer.html">http://www.polesoft.com=
>>>>>/re=3D
>>>>> >fer=3D3D
>>>>> > >.html</A> </FONT></DIV></BODY></HTML>
>>>>> > >
>>>>> > >
>>>>> >
>>>>> >
>>>>> ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
>>>>> ><HTML><HEAD>
>>>>> ><META http-equiv=3D3DContent-Type content=3D3D"text/html; =3D
>>>>> >charset=3D3Diso-8859-1">
>>>>> ><META content=3D3D"MSHTML 6.00.2800.1400" name=3D3DGENERATOR>
>>>>> ><STYLE></STYLE>
>>>>> ></HEAD>
>>>>> ><BODY bgColor=3D3D#ffffff>
>>>>> ><DIV><FONT face=3D3DArial size=3D3D2>Hey Rod,</FONT></DIV>
>>>>> ><DIV><FONT face=3D3DArial size=3D3D2>That sounds promising. What
=
>>>>>cards =3D
>>>>> >do you have=3D20
>>>>> >the</FONT></DIV>
>>>>> ><DIV><FONT face=3D3DArial size=3D3D2>Mecs and 442 connected =
>>>>>to?</FONT></DIV>
>>>>> ><DIV><FONT face=3D3DArial size=3D3D2>Tom</FONT></DIV>
>>>>> ><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
>>>>> ><DIV> </DIV>
>>>>> ><BLOCKQUOTE=3D20
>>>>> >style=3D3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px;
>> =
>>>>>=3D
>>>>> >BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
>>>>> > <DIV>"Rod Lincoln" <<A=3D20
>>>>> > =3D
>>>>> =
>>>>>>href=3D3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A=
>>>>>>&g=3D
>>>>> >t;=3D20
>>>>> > wrote in message <A=3D20
>>>>> > =3D
>>>>> =
>>>>>>href=3D3D"news:46451438$1@linux">news:46451438$1@linux</A>...</DIV><BR>I=
>>>>>'ve=3D
>>>>> > got 2=3D20
>>>>> > mecs and a 442 working here, no problems at all.<BR>I'm also =
>>>>>clocking
>>>>> =3D
>>>>> >with the=3D20
>>>>> > old Lucid genX word clock. 5 modules in one mec,<BR>4 modules in
>> =
>>>>>the =3D
>>>>> >other. 1=3D20
>>>>> > adat card each. 6 eds cards, 3 UAD cards, all in<BR>a magma. Oh
=
>>>>>yeah,
>>>>> =3D
>>>>> >a Lynx=3D20
>>>>> > one in the computer also.<BR>Rod<BR>"Tom Bruhl" <<A=3D20
>>>>> > href=3D3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20
>>>>> > wrote:<BR>><BR>><BR>>I'll be buying either two MECs or two =3D
>>>>> >442s but=3D20
>>>>> > don't want it<BR>>to mess my whole rig up if the 442s don't =
>>>>>play=3D20
>>>>> > nice.<BR>>I am using an older Lucid clock now with 2 Mecs=3D20
>>>>> > already.<BR>>They each have five modules in them. The others=3D20
>>>>> > may<BR>>see a single ADAT at most someday maybe.<BR>><BR>>I =3D
>>>>> >can make=3D20
>>>>> > the MECs fit in the machine room with the others<BR>>but the 442s
>> =
>>>>>=3D
>>>>> >would be=3D20
>>>>> > a lot easier.<BR>><BR>>Anyone know Deej?<BR>><BR>>Also I =3D
>>>>> >have to=3D20
>>>>> > find the pin config for a 56 pin EDAC/ELCO =3D
>>>>> >ADAT<BR>>connector. I want=3D20
>>>>> > to chop this bad boy off and solder 16 TRS<BR>>to it. Anyone =3D
>>>>> >know=3D20
>>>>> > whether the ADAT wiring is different=3D20
>>>>> > =3D
>>>>> >than<BR>>standard?<BR>>Thanks,<BR>>Tom<BR>><BR>><BR >><B=3D
>>>>> >R>><BR>>I=3D20
>>>>> > choose Polesoft Lockspam to fight spam, and=3D20
>>>>> > you?<BR>>http://www.polesoft.com/refer.html =3D20
>>>>> > <BR>><BR>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0=3D20
>>>>> > Transitional//EN"><BR>><HTML><HEAD><BR>><META=3D20
>>>>> > http-equiv=3D3D3DContent-Type content=3D3D3D"text/html;=3D20
>>>>> > =3D3D<BR>>charset=3D3D3Diso-8859-1"><BR>><META =3D
>>>>> >content=3D3D3D"MSHTML=3D20
>>>>> > 6.00.2800.1400"=3D20
>>>>> > =3D
>>>>> >name=3D3D3DGENERATOR><BR>><STYLE></STYLE><BR>></HEA=3D
>>>>> >D><BR>><BODY=3D20
>>>>> > bgColor=3D3D3D#ffffff><BR>><DIV><FONT face=3D3D3DArial =3D
>>>>> >size=3D3D3D2>I'll=3D20
>>>>> > be buying either two MECs or two =3D3D<BR>>442s =
>>>>>but=3D3D20<BR>>don't =3D
>>>>> >want=3D20
>>>>> > it</FONT></DIV><BR>><DIV><FONT face=3D3D3DArial=3D20
>>>>> > size=3D3D3D2>to mess my whole rig up if the 442s =
>>>>>=3D3D<BR>>don't=3D20
>>>>> > =3D
>>>>> >play=3D3D20<BR>>nice.</FONT></DIV><BR>><DIV><FON=3D
>>>>> >T=3D20
>>>>> > face=3D3D3DArial size=3D3D3D2>I am using an older Lucid clock now
>> =
>>>>>=3D
>>>>> >=3D3D<BR>>with 2=3D20
>>>>> > =3D
>>>>> >Mecs=3D3D20<BR>>already.</FONT></DIV><BR>><DIV><=3D
>>>>> >FONT=3D20
>>>>> > face=3D3D3DArial size=3D3D3D2>They each have five modules in =3D
>>>>> >=3D3D<BR>>them.=3D20
>>>>> > The=3D3D20<BR>>others =3D
>>>>> >may</FONT></DIV><BR>><DIV><FONT=3D20
>>>>> > face=3D3D3DArial size=3D3D3D2>see a single ADAT at most=3D20
>>>>> > =3D
>>>>> >someday=3D3D20<BR>>maybe.</FONT></DIV><BR>><DIV><=3D
>>>>> >;FONT=3D20
>>>>> > face=3D3D3DArial size=3D3D3D2></FONT> =3D
>>>>> ></DIV><BR>><DIV><FONT=3D20
>>>>> > face=3D3D3DArial size=3D3D3D2>I can make the MECs fit in the=3D20
>>>>> > machine<BR>=3D3D<BR>>room with=3D3D20<BR>>the=3D20
>>>>> > others</FONT></DIV><BR>><DIV><FONT =3D
>>>>> >face=3D3D3DArial=3D20
>>>>> > size=3D3D3D2>but the 442s would be </FONT><FONT=3D20
>>>>> > =3D3D<BR>>face=3D3D3DArial=3D3D20<BR>>size=3D3D3D2>a lot=3D20
>>>>> > easier.</FONT></DIV><BR>><DIV><FONT =3D
>>>>> >face=3D3D3DArial=3D20
>>>>> > size=3D3D3D2></FONT> </DIV><BR>><DIV><FONT =3D
>>>>> >face=3D3D3DArial=3D20
>>>>> > size=3D3D3D2>Anyone know=3D20
>>>>> > Deej?</FONT></DIV><BR>><DIV><FONT =3D
>>>>> >face=3D3D3DArial=3D20
>>>>> > size=3D3D3D2></FONT> </DIV><BR>><DIV><FONT =3D
>>>>> >face=3D3D3DArial=3D20
>>>>> > size=3D3D3D2>Also I have to find the pin config for<BR>=3D3D<BR>>a
>>>> =
>>>>>=3D
>>>>> >56=3D20
>>>>> > pin=3D3D20<BR>>EDAC/ELCO=3D20
>>>>> > ADAT</FONT></DIV><BR>><DIV><FONT =3D
>>>>> >face=3D3D3DArial=3D20
>>>>> > size=3D3D3D2>connector. I want to chop this =3D3D<BR>>bad boy =3D
>>>>> >off=3D3D20<BR>>and=3D20
>>>>> > solder 16 TRS</FONT></DIV><BR>><DIV><FONT =3D
>>>>> >face=3D3D3DArial=3D20
>>>>> > size=3D3D3D2>to it. Anyone know whether the =3D3D<BR>>ADAT =
>>>>>wiring=3D20
>>>>> > is=3D3D20<BR>>different=3D20
>>>>> > than</FONT></DIV><BR>><DIV><FONT =3D
>>>>> >face=3D3D3DArial=3D20
>>>>> > =3D
>>>>> >size=3D3D3D2>standard?</FONT></DIV><BR>><DIV><FO=3D
>>>>> >NT=3D20
>>>>> > face=3D3D3DArial=3D20
>>>>> > =3D
>>>>> >size=3D3D3D2>Thanks,</FONT></DIV><BR>><DIV><FONT=3D
>>>>> >=3D20
>>>>> > face=3D3D3DArial=3D20
>>>>> > size=3D3D3D2>Tom</FONT></DIV><BR>><DIV><FONT=3D20
>>>>> > face=3D3D3DArial size=3D3D3D2></FONT> =3D
>>>>> ></DIV><BR>><DIV><FONT=3D20
>>>>> > face=3D3D3DArial size=3D3D3D2></FONT> =3D
>>>>> ></DIV><BR>><DIV><FONT=3D20
>>>>> > size=3D3D3D2><BR><BR>I choose Polesoft Lockspam to fight =3D
>>>>> >spam,=3D20
>>>>> > =3D
>>>>> >=3D3D<BR>>and=3D3D20<BR>>you?<BR><A=3D3D20<BR>>href=3D3D3D "<A=3D20
>>>>> > =3D
>>>>> =
>>>>>>href=3D3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/re=
>>>>>fer=3D
>>>>> =
>>>>>>'>http://www.polesoft.com/refer.html">http://www.polesoft.com/refer</A=3D=
>>>>>
>>>>> >>=3D3D<BR>>.html</A>=3D20
>>>>> > =3D
>>>>> ></FONT></DIV></BODY></HTML><BR>><BR>><BR></=3D
>>>>> >BLOCKQUOTE></BODY></HTML>
>>>>> >
>>>>> >
>>>>>
>>>>>
>>>>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
>>>>><HTML><HEAD>
>>>>><META http-equiv=3DContent-Type content=3D"text/html; =
>>>>>charset=3Diso-8859-1">
>>>>><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
>>>>><STYLE></STYLE>
>>>>></HEAD>
>>>>><BODY bgColor=3D#ffffff>
>>>>><DIV><FONT face=3DArial size=3D2>What do you guys think,</FONT></DIV>
>>>>><DIV><FONT face=3DArial size=3D2>What are my chances of getting two
442s
>>>> =
>>>>>in the=20
>>>>>mix</FONT></DIV>
>>>>><DIV><FONT face=3DArial size=3D2>without my Mecs losing some of=20
>>>>>their cards?</FONT></DIV>
>>>>><DIV><FONT face=3DArial size=3D2>T.</FONT></DIV>
>>>>><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>>>>><BLOCKQUOTE=20
>>>>>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>>>>>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
>>>>> <DIV>"Rod Lincoln" <<A=20
>>>>> =
>>>>>href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&g=
>>>>>t;=20
>>>>> wrote in message <A=20
>>>>> =
>>>>>href=3D"news:46453f51$1@linux">news:46453f51$1@linux</A>...</DIV><BR>Mec
>>>> =
>>>>>1 on=20
>>>>> card A, 442 on Card B, Mec 2 on Card F (my last card)<BR>I'm running
>> =
>>>>>spdif out=20
>>>>> of Mec 1 to a DAC 1<BR>Rod<BR>"Tom Bruhl" <<A=20
>>>>> href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=20
>>>>> wrote:<BR>><BR>><BR>>Hey Rod,<BR>>That sounds =
>>>>>promising. =20
>>>>> What cards do you have the<BR>>Mecs and 442 connected=20
>>>>> to?<BR>>Tom<BR>><BR>><BR>> "Rod Lincoln" <<A=20
>>>>> =
>>>>>href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&g=
>>>>>t;=20
>>>>> wrote in message =
>>>>>=3D<BR>>news:46451438$1@linux...<BR>><BR>> I've=20
>>>>> got 2 mecs and a 442 working here, no problems at all.<BR>> =
>>>>>I'm also=20
>>>>> clocking with the old Lucid genX word clock. 5 modules in=20
>>>>> one<BR>=3D<BR>>mec,<BR>> 4 modules in the other. 1 adat =
>>>>>card each. 6=20
>>>>> eds cards, 3 UAD cards, =3D<BR>>all in<BR>> a magma. Oh =
>>>>>yeah, a Lynx=20
>>>>> one in the computer also.<BR>> Rod<BR>> "Tom Bruhl" =
>>>>><<A=20
>>>>> href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=20
>>>>> wrote:<BR>> ><BR>> ><BR>> >I'll be =
>>>>>buying=20
>>>>> either two MECs or two 442s but don't want it<BR>> >to =
>>>>>mess my=20
>>>>> whole rig up if the 442s don't play nice.<BR>> >I am using =
>>>>>an=20
>>>>> older Lucid clock now with 2 Mecs already.<BR>> >They each =
>>>>>have=20
>>>>> five modules in them. The others may<BR>> >see a =
>>>>>single ADAT=20
>>>>> at most someday maybe.<BR>> ><BR>> >I can make =
>>>>>the=20
>>>>> MECs fit in the machine room with the others<BR>> >but the =
>>>>>442s=20
>>>>> would be a lot easier.<BR>> ><BR>> >Anyone =
>>>>>know=20
>>>>> Deej?<BR>> ><BR>> >Also I have to find the pin =
>>>>>config=20
>>>>> for a 56 pin EDAC/ELCO ADAT<BR>> >connector. I want =
>>>>>to chop=20
>>>>> this bad boy off and solder 16 TRS<BR>> >to it. =
>>>>>Anyone know=20
>>>>> whether the ADAT wiring is different than<BR>> =20
>>>>> >standard?<BR>> >Thanks,<BR>> =
>>>>>>Tom<BR>> =20
>>>>> ><BR>> ><BR>> ><BR>> =
>>>>>><BR>> =20
>>>>> >I choose Polesoft Lockspam to fight spam, and you?<BR>> =20
>>>>> >http://www.polesoft.com/refer.html =3D20<BR>> =20
>>>>> ><BR>> ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0=20
>>>>> Transitional//EN"><BR>> =
>>>>>><HTML><HEAD><BR>> =20
>>>>> ><META http-equiv=3D3D3DContent-Type content=3D3D3D"text/html;=20
>>>>> =3D3D<BR>> >charset=3D3D3Diso-8859-1"><BR>> =
>>>>>><META=20
>>>>> content=3D3D3D"MSHTML 6.00.2800.1400" =
>>>>>name=3D3D3DGENERATOR><BR>> =20
>>>>> ><STYLE></STYLE><BR>> =
>>>>>></HEAD><BR>> =20
>>>>> ><BODY bgColor=3D3D3D#ffffff><BR>> =
>>>>>><DIV><FONT=20
>>>>> face=3D3D3DArial size=3D3D3D2>I'll be buying either two MECs =
>>>>>=3D<BR>>or two=20
>>>>> =3D3D<BR>> >442s but=3D3D20<BR>> >don't want=20
>>>>> it</FONT></DIV><BR>> ><DIV><FONT=20
>>>>> face=3D3D3DArial size=3D3D3D2>to mess my whole rig up if the =
>>>>>=3D<BR>>442s=20
>>>>> =3D3D<BR>> >don't play=3D3D20<BR>> =20
>>>>> >nice.</FONT></DIV><BR>> =
>>>>>><DIV><FONT=20
>>>>> face=3D3D3DArial size=3D3D3D2>I am using an older Lucid =
>>>>>clock<BR>=3D<BR>>now=20
>>>>> =3D3D<BR>> >with 2 Mecs=3D3D20<BR>> =20
>>>>> >already.</FONT></DIV><BR>> =
>>>>>><DIV><FONT=20
>>>>> face=3D3D3DArial size=3D3D3D2>They each have five modules in=20
>>>>> =3D<BR>>=3D3D<BR>> >them. The=3D3D20<BR>> =
>>>>>>others=20
>>>>> may</FONT></DIV><BR>> ><DIV><FONT=20
>>>>> face=3D3D3DArial size=3D3D3D2>see a single ADAT at most=20
>>>>> =3D<BR>>someday=3D3D20<BR>> =20
>>>>> >maybe.</FONT></DIV><BR>> =
>>>>>><DIV><FONT=20
>>>>> face=3D3D3DArial size=3D3D3D2></FONT> =
>>>>></DIV><BR>> =20
>>>>> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>I can make =
>>>>>the MECs fit=20
>>>>> in the =3D<BR>>machine<BR>> =3D3D<BR>> >room=20
>>>>> with=3D3D20<BR>> >the =
>>>>>others</FONT></DIV><BR>> =20
>>>>> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>but the 442s =
>>>>>would be=20
>>>>> =3D<BR>></FONT><FONT =3D3D<BR>> =20
>>>>> >face=3D3D3DArial=3D3D20<BR>> >size=3D3D3D2>a lot=20
>>>>> easier.</FONT></DIV><BR>> ><DIV><FONT =
>>>>>
>>>>> face=3D3D3DArial size=3D3D3D2></FONT> =
>>>>></DIV><BR>> =20
>>>>> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Anyone know=20
>>>>> Deej?</FONT></DIV><BR>> ><DIV><FONT=20
>>>>> face=3D3D3DArial size=3D3D3D2></FONT> =
>>>>></DIV><BR>> =20
>>>>> ><DIV><FONT face=3D3D3DArial size=3D3D3D2>Also I have =
>>>>>to find the=20
>>>>> pin =3D<BR>>config for<BR>> =3D3D<BR>> >a 56=20
>>>>> pin=3D3D20<BR>> >EDAC/ELCO=20
>>>>> ADAT</FONT></DIV><BR>> ><DIV><FONT=20
>>>>> face=3D3D3DArial size=3D3D3D2>connector. I want to chop this=20
>>>>> =3D<BR>>=3D3D<BR>> >bad boy off=3D3D20<BR>> =
>>>>>>and solder=20
>>>>> 16 TRS</FONT></DIV><BR>> ><DIV><FONT=20
>>>>> face=3D3D3DArial size=3D3D3D2>to it. Anyone know whether the=20
>>>>> =3D<BR>>=3D3D<BR>> >ADAT wiring is=3D3D20<BR>> =
>>>>>>different=20
>>>>> than</FONT></DIV><BR>> ><DIV><FONT=20
>>>>> face=3D3D3DArial =
>>>>>size=3D3D3D2>standard?</FONT></DIV><BR>> =20
>>>>> ><DIV><FONT face=3D3D3DArial=20
>>>>> size=3D3D3D2>Thanks,</FONT></DIV><BR>> =20
>>>>> ><DIV><FONT face=3D3D3DArial=20
>>>>> size=3D3D3D2>Tom</FONT></DIV><BR>> =20
>>>>> ><DIV><FONT face=3D3D3DArial size=3D3D3D2></FONT> =
>>>>>
>>>>> </DIV><BR>> ><DIV><FONT face=3D3D3DArial=20
>>>>> size=3D3D3D2></FONT> </DIV><BR>> =
>>>>>><DIV><FONT=20
>>>>> size=3D3D3D2><BR><BR>I choose Polesoft Lockspam to =
>>>>>fight=20
>>>>> =3D<BR>>spam, =3D3D<BR>> >and=3D3D20<BR>> =20
>>>>> >you?<BR><A=3D3D20<BR>> =
>>>>>=3D<BR>>>href=3D3D3D"<A=20
>>>>> =
>>>>>href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/re'>h=
>>>>>ttp://www.polesoft.com/refer.html">http://www.polesoft.com/re</A>=3D<B=
>>>>>R>>fer=3D3D<BR>> =20
>>>>> >.html</A>=20
>>>>> </FONT></DIV></BODY></HTML><BR>> =20
>>>>> ><BR>> ><BR>><BR>><BR>><!DOCTYPE HTML =
>>>>>PUBLIC=20
>>>>> "-//W3C//DTD HTML 4.0=20
>>>>> Transitional//EN"><BR>><HTML><HEAD><BR>><META=20
>>>>> http-equiv=3D3DContent-Type content=3D3D"text/html;=20
>>>>> =3D<BR>>charset=3D3Diso-8859-1"><BR>><META =
>>>>>content=3D3D"MSHTML=20
>>>>> 6.00.2800.1400"=20
>>>>> =
>>>>>name=3D3DGENERATOR><BR>><STYLE></STYLE><BR>></HEA=
>>>>>D><BR>><BODY=20
>>>>> bgColor=3D3D#ffffff><BR>><DIV><FONT face=3D3DArial =
>>>>>size=3D3D2>Hey=20
>>>>> Rod,</FONT></DIV><BR>><DIV><FONT =
>>>>>face=3D3DArial=20
>>>>> size=3D3D2>That sounds promising. What cards =3D<BR>>do you=20
>>>>> =
>>>>>have=3D20<BR>>the</FONT></DIV><BR>><DIV><FONT =
>>>>>
>>>>> face=3D3DArial size=3D3D2>Mecs and 442 connected=20
>>>>> to?</FONT></DIV><BR>><DIV><FONT face=3D3DArial =
>>>>>
>>>>> size=3D3D2>Tom</FONT></DIV><BR>><DIV><FONT=20
>>>>> face=3D3DArial size=3D3D2></FONT> =
>>>>></DIV><BR>><DIV>=20
>>>>> =
>>>>></DIV><BR>><BLOCKQUOTE=3D20<BR>>style=3D3D"PADDING-RIGHT: =
>>>>>0px;=20
>>>>> PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =3D<BR>>BORDER-LEFT: #000000
=
>>>>>2px solid;=20
>>>>> MARGIN-RIGHT: 0px"><BR>> <DIV>"Rod Lincoln"=20
>>>>> <<A=3D20<BR>> =3D<BR>>href=3D3D"<A=20
>>>>> =
>>>>>href=3D'mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&a=
>>>>>mp;g'>mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</=
>>>>>A>&g</A>=3D<BR>>t;=3D20<BR>> =20
>>>>> wrote in message <A=3D20<BR>> =3D<BR>>href=3D3D"<A=20
>>>>> =
>>>>>href=3D"news:46451438$1@linux">news:46451438$1@linux</A>...</DIV><BR=
>>>>>>I've">news:46451438$1@linux">news:46451438$1@linux</A>...</D=
>>>>>IV><BR>I've</A>=3D<BR>>=20
>>>>> got 2=3D20<BR>> mecs and a 442 working here, no problems at=20
>>>>> all.<BR>I'm also clocking<BR>=3D<BR>>with =
>>>>>the=3D20<BR>> old=20
>>>>> Lucid genX word clock. 5 modules in one mec,<BR>4 modules in the =
>>>>>
>>>>> =3D<BR>>other. 1=3D20<BR>> adat card each. 6 eds cards, 3 =
>>>>>UAD cards,=20
>>>>> all in<BR>a magma. Oh yeah,<BR>=3D<BR>>a =
>>>>>Lynx=3D20<BR>> one in=20
>>>>> the computer also.<BR>Rod<BR>"Tom Bruhl"=20
>>>>> <<A=3D20<BR>> href=3D3D"<A=20
>>>>> =
>>>>>href=3D'mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20'>mailto=
>>>>>:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20</A><BR>&g=
>>>>>t; =20
>>>>> wrote:<BR>><BR>><BR>>I'll be buying either =
>>>>>two MECs=20
>>>>> or two =3D<BR>>442s but=3D20<BR>> don't want =
>>>>>it<BR>>to mess=20
>>>>> my whole rig up if the 442s don't play=3D20<BR>> =
>>>>>nice.<BR>>I=20
>>>>> am using an older Lucid clock now with 2 Mecs=3D20<BR>> =20
>>>>> already.<BR>>They each have five modules in them. The=20
>>>>> others=3D20<BR>> may<BR>>see a single ADAT at most =
>>>>>someday=20
>>>>> maybe.<BR>><BR>>I =3D<BR>>can =
>>>>>make=3D20<BR>> the=20
>>>>> MECs fit in the machine room with the others<BR>>but the 442s =
>>>>>
>>>>> =3D<BR>>would be=3D20<BR>> a lot=20
>>>>> easier.<BR>><BR>>Anyone know=20
>>>>> Deej?<BR>><BR>>Also I =3D<BR>>have =
>>>>>to=3D20<BR>> find=20
>>>>> the pin config for a 56 pin EDAC/ELCO =
>>>>>=3D<BR>>ADAT<BR>>connector. I=20
>>>>> want=3D20<BR>> to chop this bad boy off and solder 16=20
>>>>> TRS<BR>>to it. Anyone =3D<BR>>know=3D20<BR>> =
>>>>>whether the ADAT=20
>>>>> wiring is different=3D20<BR>> =20
>>>>> =
>>>>>=3D<BR>>than<BR>>standard?<BR>>Thanks,<BR>>=
>>>>>Tom<BR>><BR>><BR>><B=3D<BR>>R>><=
>>>>>;BR>>I=3D20<BR>> =20
>>>>> choose Polesoft Lockspam to fight spam, and=3D20<BR>> =20
>>>>> you?<BR>>http://www.polesoft.com/refer.html =
>>>>>=3D20<BR>> =20
>>>>> <BR>><BR>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML =
>>>>>
>>>>> 4.0=3D20<BR>> =20
>>>>> =
>>>>>Transitional//EN"><BR>><HTML><HEAD><BR>>=
>>>>><META=3D20<BR>> =20
>>>>> http-equiv=3D3D3DContent-Type =
>>>>>content=3D3D3D"text/html;=3D20<BR>> =20
>>>>> =3D3D<BR>>charset=3D3D3Diso-8859-1"><BR>><META =
>>>>>
>>>>> =3D<BR>>content=3D3D3D"MSHTML=3D20<BR>> =
>>>>>6.00.2800.1400"=3D20<BR>> =20
>>>>> =
>>>>>=3D<BR>>name=3D3D3DGENERATOR><BR>><STYLE></STYLE&=
>>>>>gt;<BR>></HEA=3D<BR>>D><BR>><BODY=3D20<BR>&=
>>>>>gt; =20
>>>>> bgColor=3D3D3D#ffffff><BR>><DIV><FONT =
>>>>>face=3D3D3DArial=20
>>>>> =3D<BR>>size=3D3D3D2>I'll=3D20<BR>> be buying either =
>>>>>two MECs or two=20
>>>>> =3D3D<BR>>442s but=3D3D20<BR>>don't=20
>>>>> =3D<BR>>want=3D20<BR>> =20
>>>>> it</FONT></DIV><BR>><DIV><FONT=20
>>>>> face=3D3D3DArial=3D20<BR>> size=3D3D3D2>to mess my whole =
>>>>>rig up if the=20
>>>>> 442s =3D3D<BR>>don't=3D20<BR>> =20
>>>>> =
>>>>>=3D<BR>>play=3D3D20<BR>>nice.</FONT></DIV><BR&=
>>>>>gt;><DIV><FON=3D<BR>>T=3D20<BR>> =20
>>>>> face=3D3D3DArial size=3D3D3D2>I am using an older Lucid clock now=20
>>>>> =3D<BR>>=3D3D<BR>>with 2=3D20<BR>> =20
>>>>> =
>>>>>
>>>> =3D<BR>>Mecs=3D3D20<BR>>already.</FONT></DIV><=
>>>>>BR>><DIV><=3D<BR>>FONT=3D20<BR>> =20
>>>>> face=3D3D3DArial size=3D3D3D2>They each have five modules in=20
>>>>> =3D<BR>>=3D3D<BR>>them.=3D20<BR>> =
>>>>>The=3D3D20<BR>>others=20
>>>>> =
>>>>>=3D<BR>>may</FONT></DIV><BR>><DIV><FONT=3D=
>>>>>20<BR>> =20
>>>>> face=3D3D3DArial size=3D3D3D2>see a single ADAT at =
>>>>>most=3D20<BR>> =20
>>>>> =
>>>>>=3D<BR>>someday=3D3D20<BR>>maybe.</FONT></DIV><=
>>>>>;BR>><DIV><=3D<BR>>;FONT=3D20<BR>> =20
>>>>> face=3D3D3DArial size=3D3D3D2></FONT>=20
>>>>> =
>>>>>=3D<BR>></DIV><BR>><DIV><FONT=3D20<BR>>&nbs=
>>>>>p;=20
>>>>> face=3D3D3DArial size=3D3D3D2>I can make the MECs fit in =
>>>>>the=3D20<BR>> =20
>>>>> machine<BR>=3D3D<BR>>room=20
>>>>> with=3D3D20<BR>>the=3D20<BR>> =20
>>>>> others</FONT></DIV><BR>><DIV><FONT=20
>>>>> =3D<BR>>face=3D3D3DArial=3D20<BR>> size=3D3D3D2>but the =
>>>>>442s would be=20
>>>>> </FONT><FONT=3D20<BR>> =20
>>>>> =
>>>>>=3D3D<BR>>face=3D3D3DArial=3D3D20<BR>>size=3D3D3D2>a=
>>>>>=20
>>>>> lot=3D20<BR>> =20
>>>>> easier.</FONT></DIV><BR>><DIV><FONT=20
>>>>> =3D<BR>>face=3D3D3DArial=3D20<BR>> =
>>>>>size=3D3D3D2></FONT>=20
>>>>> </DIV><BR>><DIV><FONT=20
>>>>> =3D<BR>>face=3D3D3DArial=3D20<BR>> size=3D3D3D2>Anyone=20
>>>>> know=3D20<BR>> =20
>>>>> Deej?</FONT></DIV><BR>><DIV><FONT=20
>>>>> =3D<BR>>face=3D3D3DArial=3D20<BR>> =
>>>>>size=3D3D3D2></FONT>=20
>>>>> </DIV><BR>><DIV><FONT=20
>>>>> =3D<BR>>face=3D3D3DArial=3D20<BR>> size=3D3D3D2>Also I =
>>>>>have to find the=20
>>>>> pin config for<BR>=3D3D<BR>>a =
>>>>>=3D<BR>>56=3D20<BR>> =20
>>>>> pin=3D3D20<BR>>EDAC/ELCO=3D20<BR>> =20
>>>>> ADAT</FONT></DIV><BR>><DIV><FONT=20
>>>>> =3D<BR>>face=3D3D3DArial=3D20<BR>> =
>>>>>size=3D3D3D2>connector. I want to=20
>>>>> chop this =3D3D<BR>>bad boy=20
>>>>> =3D<BR>>off=3D3D20<BR>>and=3D20<BR>> solder 16=20
>>>>> TRS</FONT></DIV><BR>><DIV><FONT=20
>>>>> =3D<BR>>face=3D3D3DArial=3D20<BR>> size=3D3D3D2>to it. =
>>>>>Anyone know=20
>>>>> whether the =3D3D<BR>>ADAT wiring=3D20<BR>> =20
>>>>> is=3D3D20<BR>>different=3D20<BR>> =20
>>>>> than</FONT></DIV><BR>><DIV><FONT=20
>>>>> =3D<BR>>face=3D3D3DArial=3D20<BR>> =20
>>>>> =
>>>>>=3D<BR>>size=3D3D3D2>standard?</FONT></DIV><BR>&g=
>>>>>t;<DIV><FO=3D<BR>>NT=3D20<BR>> =20
>>>>> face=3D3D3DArial=3D20<BR>> =20
>>>>> =
>>>>>=3D<BR>>size=3D3D3D2>Thanks,</FONT></DIV><BR>>=
>>>>><DIV><FONT=3D<BR>>=3D20<BR>> =20
>>>>> face=3D3D3DArial=3D20<BR>> =20
>>>>> =
>>>>>size=3D3D3D2>Tom</FONT></DIV><BR>><DIV><=
>>>>>FONT=3D20<BR>> =20
>>>>> face=3D3D3DArial size=3D3D3D2></FONT>=20
>>>>> =
>>>>>=3D<BR>></DIV><BR>><DIV><FONT=3D20<BR>>&nbs=
>>>>>p;=20
>>>>> face=3D3D3DArial size=3D3D3D2></FONT>=20
>>>>> =
>>>>>=3D<BR>></DIV><BR>><DIV><FONT=3D20<BR>>&nbs=
>>>>>p;=20
>>>>> size=3D3D3D2><BR><BR>I choose Polesoft Lockspam to =
>>>>>fight=20
>>>>> =3D<BR>>spam,=3D20<BR>> =20
>>>>> =
>>>>>=3D<BR>>=3D3D<BR>>and=3D3D20<BR>>you?<BR><A=
>>>>>=3D3D20<BR>>href=3D3D3D"<A=3D20<BR>> =20
>>>>> =
>>>>>=3D<BR>>href=3D3D'http://www.polesoft.com/refer.html">http://www.po=
>>>>>lesoft.com/refer=3D<BR>>'>http://www.polesoft.com/refer.html">ht=
>>>>>tp://www.polesoft.com/refer</A=3D<BR>>>=3D3D<BR>>.html&=
>>>>>lt;/A>=3D20<BR>> =20
>>>>> =
>>>>>=3D<BR>></FONT></DIV></BODY></HTML><BR>&=
>>>>>gt;<BR>><BR></=3D<BR>>BLOCKQUOTE></BODY><=
>>>>>;/HTML><BR>><BR>><BR></BLOCKQUOTE></BODY></HTML>
>>>>>
>>>>>
>>>>
>>>
>>>
>>
>
>
|
|
|
|
Goto Forum:
Current Time: Thu Jun 20 08:55:57 PDT 2024
Total time taken to generate the page: 0.02525 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
