Home » The PARIS Forums » PARIS: Main » MEC headphone not working
|
|
|
|
| Re: MEC headphone not working [message #101026 is a reply to message #101020] |
Tue, 11 November 2008 17:53   |
Robert
Messages: 127
Registered: May 2007
|
Senior Member |
|
|
Thanks Deej, yes MECa attached to card A, and MECb attached to card b, both
headphone outs are not working. No biggy I guess, I never use them but I'm
kinda curious what is causing it.
Rob
"Deej" <noway@jose.net> wrote in message news:4919d1d7$1@linux...
>
> "Rob Arsenault" <mani1147athotmaildotcom> wrote:
>>This did work at one time, back when I only had 1 MEC. Haven't used it a
>
>>long time, tried it tonight and no go, tried my second MEC still no go.
>
>>Tried to toggle the main/monitor switch on the MECs, checked my cans
>>elsewhere, they work fine. Anyone else have this issue on a 2 card, 2 MEC
>
>>sys? Is this somekind of funky Paris limitation? Is it possible that I
>>fried
>
>>these outputs somewhere along the way? Other than this, the MECs work
>>fine.
>>
>>Thanks
>>Rob
>>
> .....you are monitoring the headphone out of the MEC that is attached to
> card A?.......eh?
>
> ;)
>
>
|
|
|
|
| Re: MEC headphone not working [message #101027 is a reply to message #101026] |
Tue, 11 November 2008 21:00 |
Deej [5]
Messages: 373
Registered: March 2008
|
Senior Member |
|
|
"Rob_A" <mani1147athotmaildotcom> wrote:
>Thanks Deej, yes MECa attached to card A, and MECb attached to card b, both
>headphone outs are not working. No biggy I guess, I never use them but I'm
>kinda curious what is causing it.
>
>Rob
Stuff like that drives me up the wall.
;)
>
>
>"Deej" <noway@jose.net> wrote in message news:4919d1d7$1@linux...
>>
>> "Rob Arsenault" <mani1147athotmaildotcom> wrote:
>>>This did work at one time, back when I only had 1 MEC. Haven't used it
a
>>
>>>long time, tried it tonight and no go, tried my second MEC still no go.
>>
>>>Tried to toggle the main/monitor switch on the MECs, checked my cans
>>>elsewhere, they work fine. Anyone else have this issue on a 2 card, 2
MEC
>>
>>>sys? Is this somekind of funky Paris limitation? Is it possible that I
>>>fried
>>
>>>these outputs somewhere along the way? Other than this, the MECs work
>>>fine.
>>>
>>>Thanks
>>>Rob
>>>
>> .....you are monitoring the headphone out of the MEC that is attached
to
>> card A?.......eh?
>>
>> ;)
>>
>>
>
>
|
|
|
|
| Re: MEC headphone not working [message #101028 is a reply to message #101027] |
Wed, 12 November 2008 00:48 |
Aaron Allen
Messages: 1988
Registered: May 2008
|
Senior Member |
|
|
Maybe I missed something obvious, but.... Like you I haven't fooled with it
as I use an external headphone multi-amp and have for years, so .... but I'm
thinking, didn't that have to be patched up in the bay?
AA
"Deej" <noway@jose.net> wrote in message news:491a54da$1@linux...
>
> "Rob_A" <mani1147athotmaildotcom> wrote:
>>Thanks Deej, yes MECa attached to card A, and MECb attached to card b,
>>both
>
>>headphone outs are not working. No biggy I guess, I never use them but I'm
>
>>kinda curious what is causing it.
>>
>>Rob
>
> Stuff like that drives me up the wall.
> ;)
>>
>>
>>"Deej" <noway@jose.net> wrote in message news:4919d1d7$1@linux...
>>>
>>> "Rob Arsenault" <mani1147athotmaildotcom> wrote:
>>>>This did work at one time, back when I only had 1 MEC. Haven't used it
> a
>>>
>>>>long time, tried it tonight and no go, tried my second MEC still no go.
>>>
>>>>Tried to toggle the main/monitor switch on the MECs, checked my cans
>>>>elsewhere, they work fine. Anyone else have this issue on a 2 card, 2
> MEC
>>>
>>>>sys? Is this somekind of funky Paris limitation? Is it possible that I
>
>>>>fried
>>>
>>>>these outputs somewhere along the way? Other than this, the MECs work
>
>>>>fine.
>>>>
>>>>Thanks
>>>>Rob
>>>>
>>> .....you are monitoring the headphone out of the MEC that is attached
> to
>>> card A?.......eh?
>>>
>>> ;)
>>>
>>>
>>
>>
>
|
|
|
|
| Re: MEC headphone not working [message #101034 is a reply to message #101028] |
Wed, 12 November 2008 06:25 |
Robert
Messages: 127
Registered: May 2007
|
Senior Member |
|
|
I don't recall having to patch anything in particular, basically plug the
cans into the MEC, decide what signal you want to monitor (main/monitor) and
turn up the volume. This could be different in a multi MEC setup though.
The plan was to use the MECa headphone out to feed a line in on my laptop
running a spectrum analyser app. I guess I'll have to move to plan B, what
was plan B again.......?
Thanks
Rob
"Aaron Allen" <know-spam@not_here.dude> wrote in message
news:491a9c55$1@linux...
> Maybe I missed something obvious, but.... Like you I haven't fooled with
> it as I use an external headphone multi-amp and have for years, so ....
> but I'm thinking, didn't that have to be patched up in the bay?
>
> AA
>
>
> "Deej" <noway@jose.net> wrote in message news:491a54da$1@linux...
>>
>> "Rob_A" <mani1147athotmaildotcom> wrote:
>>>Thanks Deej, yes MECa attached to card A, and MECb attached to card b,
>>>both
>>
>>>headphone outs are not working. No biggy I guess, I never use them but
>>>I'm
>>
>>>kinda curious what is causing it.
>>>
>>>Rob
>>
>> Stuff like that drives me up the wall.
>> ;)
>>>
>>>
>>>"Deej" <noway@jose.net> wrote in message news:4919d1d7$1@linux...
>>>>
>>>> "Rob Arsenault" <mani1147athotmaildotcom> wrote:
>>>>>This did work at one time, back when I only had 1 MEC. Haven't used it
>> a
>>>>
>>>>>long time, tried it tonight and no go, tried my second MEC still no go.
>>>>
>>>>>Tried to toggle the main/monitor switch on the MECs, checked my cans
>>>>>elsewhere, they work fine. Anyone else have this issue on a 2 card, 2
>> MEC
>>>>
>>>>>sys? Is this somekind of funky Paris limitation? Is it possible that I
>>
>>>>>fried
>>>>
>>>>>these outputs somewhere along the way? Other than this, the MECs work
>>
>>>>>fine.
>>>>>
>>>>>Thanks
>>>>>Rob
>>>>>
>>>> .....you are monitoring the headphone out of the MEC that is attached
>> to
>>>> card A?.......eh?
>>>>
>>>> ;)
>>>>
>>>>
>>>
>>>
>>
>
>
|
|
|
|
| Re: MEC headphone not working [message #101038 is a reply to message #101034] |
Wed, 12 November 2008 11:42 |
Kerr Mathieson
Messages: 39
Registered: September 2008
|
Member |
|
|
Don't you have to have the main outs from the mixer patched to the outputs
on the MEC (not any modules) to hear the h/phone outs?
Kerr
"Rob Arsenault" <mani1147athotmaildotcom> wrote in message
news:491aeb59@linux...
>I don't recall having to patch anything in particular, basically plug the
>cans into the MEC, decide what signal you want to monitor (main/monitor)
>and turn up the volume. This could be different in a multi MEC setup
>though. The plan was to use the MECa headphone out to feed a line in on my
>laptop running a spectrum analyser app. I guess I'll have to move to plan
>B, what was plan B again.......?
>
> Thanks
> Rob
>
> "Aaron Allen" <know-spam@not_here.dude> wrote in message
> news:491a9c55$1@linux...
>> Maybe I missed something obvious, but.... Like you I haven't fooled with
>> it as I use an external headphone multi-amp and have for years, so ....
>> but I'm thinking, didn't that have to be patched up in the bay?
>>
>> AA
>>
>>
>> "Deej" <noway@jose.net> wrote in message news:491a54da$1@linux...
>>>
>>> "Rob_A" <mani1147athotmaildotcom> wrote:
>>>>Thanks Deej, yes MECa attached to card A, and MECb attached to card b,
>>>>both
>>>
>>>>headphone outs are not working. No biggy I guess, I never use them but
>>>>I'm
>>>
>>>>kinda curious what is causing it.
>>>>
>>>>Rob
>>>
>>> Stuff like that drives me up the wall.
>>> ;)
>>>>
>>>>
>>>>"Deej" <noway@jose.net> wrote in message news:4919d1d7$1@linux...
>>>>>
>>>>> "Rob Arsenault" <mani1147athotmaildotcom> wrote:
>>>>>>This did work at one time, back when I only had 1 MEC. Haven't used it
>>> a
>>>>>
>>>>>>long time, tried it tonight and no go, tried my second MEC still no
>>>>>>go.
>>>>>
>>>>>>Tried to toggle the main/monitor switch on the MECs, checked my cans
>>>>>>elsewhere, they work fine. Anyone else have this issue on a 2 card, 2
>>> MEC
>>>>>
>>>>>>sys? Is this somekind of funky Paris limitation? Is it possible that I
>>>
>>>>>>fried
>>>>>
>>>>>>these outputs somewhere along the way? Other than this, the MECs work
>>>
>>>>>>fine.
>>>>>>
>>>>>>Thanks
>>>>>>Rob
>>>>>>
>>>>> .....you are monitoring the headphone out of the MEC that is attached
>>> to
>>>>> card A?.......eh?
>>>>>
>>>>> ;)
>>>>>
>>>>>
>>>>
>>>>
>>>
>>
>>
>
>
|
|
|
|
| Re: MEC headphone not working [message #101040 is a reply to message #101038] |
Wed, 12 November 2008 14:36 |
Robert
Messages: 127
Registered: May 2007
|
Senior Member |
|
|
Not sure Kerr, I'll have to investigate that. Thanks for the tip
Rob
"Kerr Mathieson" <oneninehundred@virgin.net> wrote in message
news:491b35d6@linux...
> Don't you have to have the main outs from the mixer patched to the outputs
> on the MEC (not any modules) to hear the h/phone outs?
>
> Kerr
>
> "Rob Arsenault" <mani1147athotmaildotcom> wrote in message
> news:491aeb59@linux...
>>I don't recall having to patch anything in particular, basically plug the
>>cans into the MEC, decide what signal you want to monitor (main/monitor)
>>and turn up the volume. This could be different in a multi MEC setup
>>though. The plan was to use the MECa headphone out to feed a line in on my
>>laptop running a spectrum analyser app. I guess I'll have to move to plan
>>B, what was plan B again.......?
>>
>> Thanks
>> Rob
>>
>> "Aaron Allen" <know-spam@not_here.dude> wrote in message
>> news:491a9c55$1@linux...
>>> Maybe I missed something obvious, but.... Like you I haven't fooled
>>> with it as I use an external headphone multi-amp and have for years, so
>>> .... but I'm thinking, didn't that have to be patched up in the bay?
>>>
>>> AA
>>>
>>>
>>> "Deej" <noway@jose.net> wrote in message news:491a54da$1@linux...
>>>>
>>>> "Rob_A" <mani1147athotmaildotcom> wrote:
>>>>>Thanks Deej, yes MECa attached to card A, and MECb attached to card b,
>>>>>both
>>>>
>>>>>headphone outs are not working. No biggy I guess, I never use them but
>>>>>I'm
>>>>
>>>>>kinda curious what is causing it.
>>>>>
>>>>>Rob
>>>>
>>>> Stuff like that drives me up the wall.
>>>> ;)
>>>>>
>>>>>
>>>>>"Deej" <noway@jose.net> wrote in message news:4919d1d7$1@linux...
>>>>>>
>>>>>> "Rob Arsenault" <mani1147athotmaildotcom> wrote:
>>>>>>>This did work at one time, back when I only had 1 MEC. Haven't used
>>>>>>>it
>>>> a
>>>>>>
>>>>>>>long time, tried it tonight and no go, tried my second MEC still no
>>>>>>>go.
>>>>>>
>>>>>>>Tried to toggle the main/monitor switch on the MECs, checked my cans
>>>>>>>elsewhere, they work fine. Anyone else have this issue on a 2 card, 2
>>>> MEC
>>>>>>
>>>>>>>sys? Is this somekind of funky Paris limitation? Is it possible that
>>>>>>>I
>>>>
>>>>>>>fried
>>>>>>
>>>>>>>these outputs somewhere along the way? Other than this, the MECs work
>>>>
>>>>>>>fine.
>>>>>>>
>>>>>>>Thanks
>>>>>>>Rob
>>>>>>>
>>>>>> .....you are monitoring the headphone out of the MEC that is attached
>>>> to
>>>>>> card A?.......eh?
>>>>>>
>>>>>> ;)
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>>
>>
>>
>
|
|
|
|
| Re: MEC headphone not working...UPDATE [message #101076 is a reply to message #101038] |
Fri, 14 November 2008 19:38 |
Robert
Messages: 127
Registered: May 2007
|
Senior Member |
|
|
Kerr was exactly rite, after patching from the main outs of the mixer module
to the MEC module , the MEC phone outs work. Thanks again Kerr.
This may be one for the wiki.
Rob
"Kerr Mathieson" <oneninehundred@virgin.net> wrote in message
news:491b35d6@linux...
> Don't you have to have the main outs from the mixer patched to the outputs
> on the MEC (not any modules) to hear the h/phone outs?
>
> Kerr
>
> "Rob Arsenault" <mani1147athotmaildotcom> wrote in message
> news:491aeb59@linux...
>>I don't recall having to patch anything in particular, basically plug the
>>cans into the MEC, decide what signal you want to monitor (main/monitor)
>>and turn up the volume. This could be different in a multi MEC setup
>>though. The plan was to use the MECa headphone out to feed a line in on my
>>laptop running a spectrum analyser app. I guess I'll have to move to plan
>>B, what was plan B again.......?
>>
>> Thanks
>> Rob
>>
>> "Aaron Allen" <know-spam@not_here.dude> wrote in message
>> news:491a9c55$1@linux...
>>> Maybe I missed something obvious, but.... Like you I haven't fooled
>>> with it as I use an external headphone multi-amp and have for years, so
>>> .... but I'm thinking, didn't that have to be patched up in the bay?
>>>
>>> AA
>>>
>>>
>>> "Deej" <noway@jose.net> wrote in message news:491a54da$1@linux...
>>>>
>>>> "Rob_A" <mani1147athotmaildotcom> wrote:
>>>>>Thanks Deej, yes MECa attached to card A, and MECb attached to card b,
>>>>>both
>>>>
>>>>>headphone outs are not working. No biggy I guess, I never use them but
>>>>>I'm
>>>>
>>>>>kinda curious what is causing it.
>>>>>
>>>>>Rob
>>>>
>>>> Stuff like that drives me up the wall.
>>>> ;)
>>>>>
>>>>>
>>>>>"Deej" <noway@jose.net> wrote in message news:4919d1d7$1@linux...
>>>>>>
>>>>>> "Rob Arsenault" <mani1147athotmaildotcom> wrote:
>>>>>>>This did work at one time, back when I only had 1 MEC. Haven't used
>>>>>>>it
>>>> a
>>>>>>
>>>>>>>long time, tried it tonight and no go, tried my second MEC still no
>>>>>>>go.
>>>>>>
>>>>>>>Tried to toggle the main/monitor switch on the MECs, checked my cans
>>>>>>>elsewhere, they work fine. Anyone else have this issue on a 2 card, 2
>>>> MEC
>>>>>>
>>>>>>>sys? Is this somekind of funky Paris limitation? Is it possible that
>>>>>>>I
>>>>
>>>>>>>fried
>>>>>>
>>>>>>>these outputs somewhere along the way? Other than this, the MECs work
>>>>
>>>>>>>fine.
>>>>>>>
>>>>>>>Thanks
>>>>>>>Rob
>>>>>>>
>>>>>> .....you are monitoring the headphone out of the MEC that is attached
>>>> to
>>>>>> card A?.......eh?
>>>>>>
>>>>>> ;)
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>>
>>
>>
>
|
|
|
|
|
|
|
|
Goto Forum:
Current Time: Fri Nov 01 08:28:19 PDT 2024
Total time taken to generate the page: 0.01796 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
