| PLEASE PLEASE... I NEED THESE CABLES... FAST! [message #103604] |
Thu, 25 June 2009 13:18  |
marzkid
Messages: 2
Registered: June 2009
Location: Oregon
|
Junior Member |
|
|
Hey ever'body, I can't tell you the exact technologic terminology for these guys, but if you're experienced at hooking up multi-card systems, you'll get it. They are the cables that you use to hook the two PCI cards together in your tower. They are 2x 16 pin ribbon cables and 1x 10 pin ribbon cable. I can't find them anywhere within the time frame that is pushing 10 DAYS OR LESS to finish this project
SO IF YOU FEEL ME AND YOU HAVE SOME OF THESE BABYS HANGIN OUT PLEASE PLEASE PLEASE SELL THEM TO ME!!!!! FAAAAAST!!!!!!
Thank you all very much>cam
•Ånåløg•m¡nd•¡n•å•D¡gi†ål•wørld•
[Updated on: Thu, 25 June 2009 13:27] Report message to a moderator |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Re: PLEASE PLEASE... I NEED THESE CABLES... FAST! [message #103626 is a reply to message #103625] |
Sat, 27 June 2009 14:33  |
|
|
I'm guessing you mean one side of the connector's end not "clicking" while locking onto the ribbon?
It should go - you might try cautiously and judiciously muscling it just a tiny bit (gently) - you want to make certain that the "prongs" inside the connector end displace the insulation on the ribbon far enough to make a good solid connection with the conductors inside.
As far as installation of the finished cable, they don't lock onto the EDS card, it's just a snug pressure fit. Make *double sure* you don't have the pins offset by one when you install the ten pin cables.
Mind you - by now you've probably already got it installed and running 
"... being bitter is like swallowing poison and waiting for the other guy to die..." - anon
[Updated on: Sat, 27 June 2009 14:34] Report message to a moderator |
|
|
|
|
|
|
|
|
|
|
|
|
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
