The PARIS Forums: PARIS: Main

Home » The PARIS Forums » PARIS: Main » Error Code

Show: Today's Messages :: Polls :: Message Navigator

Error Code [message #71666]

Wed, 23 August 2006 07:01

Greg O
Messages: 4
Registered: August 2006

Junior Member

Does anyone know what: _tpt QueProject Error in setting direction. Error code
1879048261/70000045 mean?
Just started showing up when
during recording session. I'm running on a G4- 9.2.2
Please help! Thanks, Greg O

Report message to a moderator

Re: Error Code [message #71673 is a reply to message #71666]

Wed, 23 August 2006 09:09

Deej [1]

Messages: 2149
Registered: January 2006

Senior Member

Did you save a project and then close Paris with the loop function enabled?
If so, this is likely the reason. Open the project, disable the loop
function, save the project under a new name and you should be good (if this
is he error I think it is). This code is one of the *features* that isn't
mentioned in the manual.

good luck,

DJ

"Greg O" <studio2590@infostations.com> wrote in message
news:44ec5fc8$1@linux...
>
> Does anyone know what: _tpt QueProject Error in setting direction. Error
code
> 1879048261/70000045 mean?
> Just started showing up when
> during recording session. I'm running on a G4- 9.2.2
> Please help! Thanks, Greg O
>

Report message to a moderator

Re: Error Code [message #71678 is a reply to message #71673]

Wed, 23 August 2006 13:08

john[4]
Messages: 1
Registered: August 2006

Junior Member

also

I've dealt with this issue quite a bit.

I've even caused it on purpose to try to figure out how to fix
it.
(recording with looping on (with no punch points) will cause it)

Anyway, in ALL cases that I've seen, the error seems to be caused
by a corrupted segment on the playing field.. actually, I believe
it is caused by a corrupted crossfade, to be specific.

Whenever, I get this error, I remove the last take/edit from the
playing
field
(between the dialogs popping up), save, quite and restart paris.

At this point, the problem seems to go away.

Good luck!

Try increasing your disk cache and overview sizes in the Config menu. On
the problem project, clear the Undo buffer and delete the Markers.

I never have that problem anymore (like once every 6 months now) since I
increased my disk cache size to 128MB and my overview to 21000KB.

BT

Pablo wrote:
> My paris system has gotten into the habit of crashing
> very often, and the message I get is:
>
> _tptQueProject:Error in queing Project Error code 1879048233/70000029
>
> It automatically closes after this and I lose whatever I haven't
> saved (obviously). Today, while in the mixing stage of the recording,
> one of the songs did it as soon as I opened it. It used to do it while
> a song was playing or recording but this time it did it as soon
> as I opened it. I would click "ok" and it would keep coming up over and
> over so I would end task and restart only to get the same result.
> Eventually I just let it sit for a couple of minutes and it stopped
> doing it. Any idea what could have caused this? Or what causes
> all the other crashes I've had similiar to this one?
>
> I used to have this problem when I tried to use the wave editor
> so I stopped using that function. But I haven't gone near the
> wave editor since.

"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>Did you save a project and then close Paris with the loop function enabled?
>If so, this is likely the reason. Open the project, disable the loop
>function, save the project under a new name and you should be good (if this
>is he error I think it is). This code is one of the *features* that isn't
>mentioned in the manual.
>
>good luck,
>
>DJ
>
>"Greg O" <studio2590@infostations.com> wrote in message
>news:44ec5fc8$1@linux...
>>
>> Does anyone know what: _tpt QueProject Error in setting direction. Error
>code
>> 1879048261/70000045 mean?
>> Just started showing up when
>> during recording session. I'm running on a G4- 9.2.2
>> Please help! Thanks, Greg O
>>
>
>

Report message to a moderator

Re: Error Code [message #71679 is a reply to message #71673]

Wed, 23 August 2006 13:33

Greg O
Messages: 4
Registered: August 2006

Junior Member

"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>Did you save a project and then close Paris with the loop function enabled?
>If so, this is likely the reason. Open the project, disable the loop
>function, save the project under a new name and you should be good (if this
>is he error I think it is). This code is one of the *features* that isn't
>mentioned in the manual.
>
>good luck,
>
>DJ
>
>"Greg O" <studio2590@infostations.com> wrote in message
>news:44ec5fc8$1@linux...
>>
>> Does anyone know what: _tpt QueProject Error in setting direction. Error
>code
>> 1879048261/70000045 mean?
>> Just started showing up when
>> during recording session. I'm running on a G4- 9.2.2
>> Please help! Thanks, Greg O
>>
>
>
I'm still kinda new to Paris and not sure what you mean by disabling the
loop...I really appreciate all the help I can
get, thanks a bunch!

Report message to a moderator

Re: Error Code [message #71681 is a reply to message #71679]

Wed, 23 August 2006 14:30

John [1]
Messages: 2229
Registered: September 2005

Senior Member

The looping is a button on the C16 and on the transport window that has a
start and end point to loop over and over. You probably don't have that
on if you don't know what it is.

Have you been doing any crossfades?

I would bet on your paris.cfg file needing optimizing.
C:\program files\ensoniq\paris\paris.cfg

This is what mine is set to:

*** PARIS Configuration ***

*** ENGINE configuration parameters ***
* Cache Size in MB
CacheSize=128

* Overview cache size in KB
OvwCacheSize=8192

* I/O configuration
IOSize=256

* SubMix Cache Size in KB
SubMixCacheSize=256

ManualRecDelay=4096

RecXFadeLen=20
Use32BitWinMTC=0

DisableDirectX=0

MasterOutputCard=0

ScrubMaxRate=1

WheelSensitivity=20

WheelInertia=68

CSProVersion=ABCDEFGH

VSTDirectory=C:\vsts\

MIDIPlayDisabled=1

Report message to a moderator

Re: Error Code [message #71682 is a reply to message #71681]

Wed, 23 August 2006 14:39

John [1]

Messages: 2229
Registered: September 2005

Senior Member

Also,

Try resetting the record path to a new empty folder.
Or if you are on the Mac and running anything before OS 9 you may have
run out of open files (MacOS limit). If this is the case try clearing
unused files from the audio window.

John wrote:
> The looping is a button on the C16 and on the transport window that has a
> start and end point to loop over and over. You probably don't have that
> on if you don't know what it is.
>
> Have you been doing any crossfades?
>
> I would bet on your paris.cfg file needing optimizing.
> C:\program files\ensoniq\paris\paris.cfg
>
> This is what mine is set to:
>
>
> *** PARIS Configuration ***
>
> *** ENGINE configuration parameters ***
> * Cache Size in MB
> CacheSize=128
>
> * Overview cache size in KB
> OvwCacheSize=8192
>
> * I/O configuration
> IOSize=256
>
> * SubMix Cache Size in KB
> SubMixCacheSize=256
>
> ManualRecDelay=4096
>
> RecXFadeLen=20
> Use32BitWinMTC=0
>
> DisableDirectX=0
>
> MasterOutputCard=0
>
> ScrubMaxRate=1
>
> WheelSensitivity=20
>
> WheelInertia=68
>
> CSProVersion=ABCDEFGH
>
> VSTDirectory=C:\vsts\
>
> MIDIPlayDisabled=1
>

Report message to a moderator

Re: Error Code [message #71683 is a reply to message #71681]

Wed, 23 August 2006 14:39

John [1]

Messages: 2229
Registered: September 2005

Senior Member

And don't forget to go here:

www.kfocus.com/paris

John wrote:
> The looping is a button on the C16 and on the transport window that has a
> start and end point to loop over and over. You probably don't have that
> on if you don't know what it is.
>
> Have you been doing any crossfades?
>
> I would bet on your paris.cfg file needing optimizing.
> C:\program files\ensoniq\paris\paris.cfg
>
> This is what mine is set to:
>
>
> *** PARIS Configuration ***
>
> *** ENGINE configuration parameters ***
> * Cache Size in MB
> CacheSize=128
>
> * Overview cache size in KB
> OvwCacheSize=8192
>
> * I/O configuration
> IOSize=256
>
> * SubMix Cache Size in KB
> SubMixCacheSize=256
>
> ManualRecDelay=4096
>
> RecXFadeLen=20
> Use32BitWinMTC=0
>
> DisableDirectX=0
>
> MasterOutputCard=0
>
> ScrubMaxRate=1
>
> WheelSensitivity=20
>
> WheelInertia=68
>
> CSProVersion=ABCDEFGH
>
> VSTDirectory=C:\vsts\
>
> MIDIPlayDisabled=1
>

Report message to a moderator

Re: Error Code [message #71684 is a reply to message #71683]

Wed, 23 August 2006 15:22

Greg O
Messages: 4
Registered: August 2006

Junior Member

John <no@no.com> wrote:
>And don't forget to go here:
>
>www.kfocus.com/paris
>
>John wrote:
>> The looping is a button on the C16 and on the transport window that has
a
>> start and end point to loop over and over. You probably don't have that
>> on if you don't know what it is.
>>
>> Have you been doing any crossfades?
>>
>> I would bet on your paris.cfg file needing optimizing.
>> C:\program files\ensoniq\paris\paris.cfg
>>
>> This is what mine is set to:
>>
>>
>> *** PARIS Configuration ***
>>
>> *** ENGINE configuration parameters ***
>> * Cache Size in MB
>> CacheSize=128
>>
>> * Overview cache size in KB
>> OvwCacheSize=8192
>>
>> * I/O configuration
>> IOSize=256
>>
>> * SubMix Cache Size in KB
>> SubMixCacheSize=256
>>
>> ManualRecDelay=4096
>>
>> RecXFadeLen=20
>> Use32BitWinMTC=0
>>
>> DisableDirectX=0
>>
>> MasterOutputCard=0
>>
>> ScrubMaxRate=1
>>
>> WheelSensitivity=20
>>
>> WheelInertia=68
>>
>> CSProVersion=ABCDEFGH
>>
>> VSTDirectory=C:\vsts\
>>
>> MIDIPlayDisabled=1
>>
Thanks John....I'll give this a try. I'm very new to this program
and not sure what crossfades are yet,sorry.

Report message to a moderator

Re: Error Code [message #71685 is a reply to message #71684]

Wed, 23 August 2006 16:22

John [1]
Messages: 2229
Registered: September 2005

Senior Member

Greg, What is your setup? Mec, C16, cards, Pc type? Post questions here.
It's a very helpful NG.

"Greg O" <studio2590@infostations.com> wrote:
>
>John <no@no.com> wrote:
>>And don't forget to go here:
>>
>>www.kfocus.com/paris
>>
>>John wrote:
>>> The looping is a button on the C16 and on the transport window that has
>a
>>> start and end point to loop over and over. You probably don't have that
>>> on if you don't know what it is.
>>>
>>> Have you been doing any crossfades?
>>>
>>> I would bet on your paris.cfg file needing optimizing.
>>> C:\program files\ensoniq\paris\paris.cfg
>>>
>>> This is what mine is set to:
>>>
>>>
>>> *** PARIS Configuration ***
>>>
>>> *** ENGINE configuration parameters ***
>>> * Cache Size in MB
>>> CacheSize=128
>>>
>>> * Overview cache size in KB
>>> OvwCacheSize=8192
>>>
>>> * I/O configuration
>>> IOSize=256
>>>
>>> * SubMix Cache Size in KB
>>> SubMixCacheSize=256
>>>
>>> ManualRecDelay=4096
>>>
>>> RecXFadeLen=20
>>> Use32BitWinMTC=0
>>>
>>> DisableDirectX=0
>>>
>>> MasterOutputCard=0
>>>
>>> ScrubMaxRate=1
>>>
>>> WheelSensitivity=20
>>>
>>> WheelInertia=68
>>>
>>> CSProVersion=ABCDEFGH
>>>
>>> VSTDirectory=C:\vsts\
>>>
>>> MIDIPlayDisabled=1
>>>
>Thanks John....I'll give this a try. I'm very new to this program
>and not sure what crossfades are yet,sorry.

Report message to a moderator

Re: Error Code [message #71692 is a reply to message #71666]

Thu, 24 August 2006 02:48

rick

Messages: 1976
Registered: February 2006

Senior Member

two lines of thought on this one is your set up settings which john
has addressed. the other which he touched on was the loop function
and the other is the punch in function. if either was active (on) on
saving a file this error will occur. the best temp work around is to
as soon as the song loads turn off those listed if on and immediately
hit the save as and rename the file. do not open any gui or hit play
as this will trigger the error message and pretty much lock you out
from doing the above.

On 24 Aug 2006 00:01:44 +1000, "Greg O" <studio2590@infostations.com>
wrote:

>
>Does anyone know what: _tpt QueProject Error in setting direction. Error code
>1879048261/70000045 mean?
> Just started showing up when
>during recording session. I'm running on a G4- 9.2.2
> Please help! Thanks, Greg O

Report message to a moderator

Re: Error Code [message #71721 is a reply to message #71692]

Thu, 24 August 2006 21:48

Deej [1]

Messages: 2149
Registered: January 2006

Senior Member

do not open any gui or hit play
as this will trigger the error message and pretty much lock you out
from doing the above.

......awwww....c'mon man!!!! You're such a spoilsport. Let him have a half
day of fun with this like everyone else.

;oP

"rick" <parnell68@hotmail.com> wrote in message
news:24tqe2tj9kdvi5skhll5qnr64v822rceds@4ax.com...
> two lines of thought on this one is your set up settings which john
> has addressed. the other which he touched on was the loop function
> and the other is the punch in function. if either was active (on) on
> saving a file this error will occur. the best temp work around is to
> as soon as the song loads turn off those listed if on and immediately
> hit the save as and rename the file. do not open any gui or hit play
> as this will trigger the error message and pretty much lock you out
> from doing the above.
>
>
>
> On 24 Aug 2006 00:01:44 +1000, "Greg O" <studio2590@infostations.com>
> wrote:
>
> >
> >Does anyone know what: _tpt QueProject Error in setting direction. Error
code
> >1879048261/70000045 mean?
> > Just started showing up when
> >during recording session. I'm running on a G4- 9.2.2
> > Please help! Thanks, Greg O
>

Report message to a moderator

Re: Error Code [message #71722 is a reply to message #71721]

Fri, 25 August 2006 01:44

rick

Messages: 1976
Registered: February 2006

Senior Member

sorry but i changed my underwear this month and the reason for my
inability to educate (punish) the innocent has temporarily left the
building.

On Thu, 24 Aug 2006 22:48:48 -0600, "DJ"
<animix_spam-this-ahole_@animas.net> wrote:

>do not open any gui or hit play
>as this will trigger the error message and pretty much lock you out
>from doing the above.
>
>
>.....awwww....c'mon man!!!! You're such a spoilsport. Let him have a half
>day of fun with this like everyone else.
>
>;oP
>
>"rick" <parnell68@hotmail.com> wrote in message
>news:24tqe2tj9kdvi5skhll5qnr64v822rceds@4ax.com...
>> two lines of thought on this one is your set up settings which john
>> has addressed. the other which he touched on was the loop function
>> and the other is the punch in function. if either was active (on) on
>> saving a file this error will occur. the best temp work around is to
>> as soon as the song loads turn off those listed if on and immediately
>> hit the save as and rename the file. do not open any gui or hit play
>> as this will trigger the error message and pretty much lock you out
>> from doing the above.
>>
>>
>>
>> On 24 Aug 2006 00:01:44 +1000, "Greg O" <studio2590@infostations.com>
>> wrote:
>>
>> >
>> >Does anyone know what: _tpt QueProject Error in setting direction. Error
>code
>> >1879048261/70000045 mean?
>> > Just started showing up when
>> >during recording session. I'm running on a G4- 9.2.2
>> > Please help! Thanks, Greg O
>>
>

Report message to a moderator

Previous Topic:	Yet another RIP - David Schnaufer
Next Topic:	why can't i search this forum in outlook express????

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Dec 20 20:33:21 PST 2024

Total time taken to generate the page: 0.01767 seconds