The PARIS Forums: PARIS: Main

Home » The PARIS Forums » PARIS: Main » Aux routing

Show: Today's Messages :: Polls :: Message Navigator

Aux routing [message #102664]

Fri, 27 February 2009 12:33

Ted Gerber

Messages: 705
Registered: January 2009

Senior Member

Howdy

I'm trying some different summing approaches, and want to send
8 to 12 channels from the mix (without having to bounce down into 4 - 8 stereo
pairs first) out to analog, and record back on to the playing field.

I should be able route all the drums (for instance) to aux 1, all the guitars
to aux 2, vox to aux 3 etc and have them sum back into the mains right? I
should set the sends as pre fader,
and mute the individual tracks right? Trouble is, I can't get any
audio out of the MEC to the analog board. I know with Inserts, you have to
complete the signal path in the patch bay but I'm having no success with
this.

Can anybody explain this for me? I used to be able to do it 3 or 4 years
ago, but can't now...

Thanks

Ted

Report message to a moderator

Re: Aux routing [message #102665 is a reply to message #102664]

Fri, 27 February 2009 18:27

Don Nafe

Messages: 1206
Registered: July 2005

Senior Member

I have routed auxes back to the mixer using Chuck's wires out and wires in
but that's within a single subgroup if I remember...also if I'm not mistaken
you can use Faderworks in this manner but I could be wrong..

I remember Deej walked me through an aux out setup in the patchbay and I
have the setup saved...only problem is my paris rig is down for the count
and I can't access it.

Don

"Ted Gerber" <tedgerber@rogers.com> wrote in message
news:49a852e6$1@linux...
>
> Howdy
>
> I'm trying some different summing approaches, and want to send
> 8 to 12 channels from the mix (without having to bounce down into 4 - 8
> stereo
> pairs first) out to analog, and record back on to the playing field.
>
> I should be able route all the drums (for instance) to aux 1, all the
> guitars
> to aux 2, vox to aux 3 etc and have them sum back into the mains right? I
> should set the sends as pre fader,
> and mute the individual tracks right? Trouble is, I can't get any
> audio out of the MEC to the analog board. I know with Inserts, you have to
> complete the signal path in the patch bay but I'm having no success with
> this.
>
> Can anybody explain this for me? I used to be able to do it 3 or 4 years
> ago, but can't now...
>
> Thanks
>
> Ted

Report message to a moderator

Re: Aux routing [message #102720 is a reply to message #102664]

Wed, 04 March 2009 07:27

David L

Messages: 59
Registered: September 2007

Member

It's been awhile for me, but I've had an aux setup for drummer mixes set up
successfully, so I don't see any reason why this shouldn't work.

As far as pre/post fader goes, don't mute the channels, just bring the
faders all the way down.

As far as the sends themselves, be sure that each one is set to be a stereo
send.

In your PARIS patchbay, route the sends to the outputs of your MEC.

DL

Report message to a moderator

Previous Topic:	Sonar 2 and PARIS
Next Topic:	Can't Record in both MECS simultaneously... HELP!!!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Nov 24 21:48:14 PST 2024

Total time taken to generate the page: 0.01915 seconds