The PARIS Forums: PARIS: Main » Win98 drive size

Home » The PARIS Forums » PARIS: Main » Win98 drive size

Show: Today's Messages :: Polls :: Message Navigator

Win98 drive size [message #59247]

Tue, 18 October 2005 04:25

John [1]

Messages: 2229
Registered: September 2005

Senior Member

ux...
>
> Hi,
> Here is my setup proposition something that I use and I am in "heaven"
with
> that configuration.
>
> Well, if you buy secondhand three Pulsar Creamware cards with classic
configuration
> you get 1 stereo spdif in/out 16 ADAT i/o and two analog 24 bit (up to
96khz)
> in out plus midi in out.
> So for three cards you get 48 Adat in/outs 3 spdif stereo in/outs and 6
analog
> in/outs.
> Pretty close to what you want.
> This setup when configured right is EXTREMELY reliable !
> Plus you get the scope environement with cosoles digital effects that run
> from Pulsar
> dsps with great Pulsar plugins like VINCO (1176 clone) PSY-Q (BBE enhancer
> type) and the most incredible, could I say best, synthesizers on any
platform,
> period.
> This setup along with Paris is truely amazing.
> Using a f

Report message to a moderator

Re: Win98 drive size [message #59258 is a reply to message #59247]

Tue, 18 October 2005 06:20

John [1]

Messages: 2229
Registered: September 2005

Senior Member

rget="_blank">43545355@linux...
> > > > > > So the AES to SPDIF cables go between which two pieces of kit?
> > > > > >
> > > > > > Paris and Digipatch, or FX to Digipatch?
> > > > > >
> > > > > > Jimmy
> > > > > >
> > > > > >
> > > > > > "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> > > > > > news:4354526f@linux...
> > > > > > > I tried this too. It's basically a no go, no matter what
> *should*
> > be
> > > > > > > happening. I'm interfacing the AES I/O of both a Quantec
> Yardstick
> > > and
> > > > a
> > > > > > > Power Technology DSP/FX card with Paris through an M-Audio
> > Digipatch
> > > > > using
> > > > > > > Hosa CDL-313 AES to coaxial converters. These do the job. This

Report message to a moderator

Re: Win98 drive size [message #59274 is a reply to message #59258]

Tue, 18 October 2005 16:54

Aaron Allen

Messages: 1988
Registered: May 2008

Senior Member

r /> > > >>>>CDL/MEC with the spdif cables will work........at least it works for
> > >
> > > me.
> > >
> > >>>>;o)
> > >>>>
> > >>>>"uptown jimmy" <johnson314@bellsouth.net> wrote in message
> > >>>>news:435466a6@linux...
> > >>>>
> > >>>>>Or just skip the Digipatch altogether, and run the 75 ohm SPDIF
> > >>
> > >>between
> > >>
> > >>>>the
> > >>>>
> > >>>>>CDL-313 and Paris, right?
> > >>>>>
> > >>>>>But there's got to be some translation going on, not just a cable
> > >>>
> > >>>changing
> > >>>
> > >>>>>sides from one side to the other....
> > >>>>>
> > >>>>>Jimmy
> > >>>>>
> > >>>>>
> > >>>>>"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> > >>>>>news:435455fc$1@linux...
> > >>>>>
> > >>>>>>Run the AES cables from the KSP8 into the respective AES I/O of
> > >
> > > the
> >

Report message to a moderator

Re: Win98 drive size [message #59281 is a reply to message #59274]

Tue, 18 October 2005 18:14

Deej [1]

Messages: 2149
Registered: January 2006

Senior Member

ris problem, or does
> it
> > > just
> > > > > not work for any system?
> > > > >
> > > > > Jimmy
> > > > >
> > > > > "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> > > > > news:4354714c$1@linux...
> > > > >
> > > > >>Here's where I got both of mine. It's a brick & mortar and the
> service
> > > is
> > > > >>good......human beings to talk to who actually know about their
> > > products.
> > > > >>
> > > > >>http://www.sbfilmaudio.com/
> > > > >>
> > > > >>Deej
> > > > >>
> > > > >>"uptown jimmy" <johnson314@bellsouth.net> wrote in message
> > > > >>news:43546fe8@linux...
> > > > >>
> > > > >>>Rock and roll.
> > > > >>>
> > > > >>>Will relay the info.
> > > > >>>
> > > > >>>Jimmy
> > > > >>>
> > > > >>>"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> > > > >>>news:43546ba7$1@linux...
> > > > >>>
> > > > >>>>the CDL is a bidirectional AES>spdif converter.....and yeah,
going
> > > > >>>
> > > > >>>directly
> > > > >>>
> > > > >>>>from the KSP 8 into the CDL with the AES cables and then
directly
> > > >

Report message to a moderator

Re: Win98 drive size [message #59283 is a reply to message #59247]

Tue, 18 October 2005 22:47

erlilo

Messages: 405
Registered: June 2005

Senior Member

gt;>
> > > > >>>>"uptown jimmy" <johnson314@bellsouth.net> wrote in message
> > > > >>>>news:435466a6@linux...
> > > > >>>>
> > > > >>>>>Or just skip the Digipatch altogether, and run the 75 ohm SPDIF
> > > > >>
> > > > >>between
> > > > >>
> > > > >>>>the
> > > > >>>>
> > > > >>>>>CDL-313 and Paris, right?
> > > > >>>>>
> > > > >>>>>But there's got to be some translation going on, not just a
cable
> > > > >>>
> > > > >>>changing
> > > > >>>
> > > > >>>>>sides from one side to the other....
> > > > >>>>>
> > > > >>>>>Jimmy
> > > > >>>>>
> > > > >>>>>
> > > > >>>>>"DJ" <animix_spam-this-ahole_@animas.net> wrote in message<

Report message to a moderator

Re: Win98 drive size [message #59295 is a reply to message #59281]

Wed, 19 October 2005 12:03

John [1]

Messages: 2229
Registered: September 2005

Senior Member

en Paris is
> gone...). Is this the best way to go about it?
>
> Thanks for any insight on this!
>
> Btw, you guys have been awesome. I've been "lurking" here daily since
> 2001
> and you guys helped out with many of the questions and difficulties that
> we had. Thanks so much for your kindness and generousity!!
>
> All the best,
>
> ShawnBy comparison, what's the latest hot ticket AMD running I wonder?
AA

"gene lennon" <glennon@NOSPmyrealbox.com> wrote in message
news:4357157f$1@linux...
>
> Just found this in my computer archives (From 9 years ago):
>
> The newest versions of the Beowulf cluster, linking 16 Intel Pentium Pro
> processors with Fast Ethernet networks, attained over one gigaFLOPS
> sustained
> on a cosmological N-body simulation. The architecture was conceived by the
> Center of Excellence in Space Data and Information Sciences (USRA CESDIS)
> at NASA Goddard Space Flight Center. The NASA High Performance Computing
> and Communications (HPCC) Program's Earth and Space Sciences (ESS) Project
> funds continuing development.
>
> Supercomputing '96 attendees will be able to inspect the systems at the
> Caltech
> Center for Advanced Computing Research (#R62) and Los Alamos (#R86)
> research
> exhibits November 18-21. Tied together with 16 additional Ethernet
> channels,
> the two Beowulfs will work in concert to realize greater than 2 gigaFLOPS
> on several demonstrations.
> _________________________________________
>
> The new G5 is 76.6 gigaflops.
>
> _______________________________________
> First Cray Supercomputer CDC 6600 -1964, 9 megaflops (not Gigaflops) for
> 7 Million $$.
> Cray-CDC 7600 (40 megaflops) used for US Moon Landing 1969.
>
> 76.6 gigaflops!!! Music should be writing itself at this speed.
>
>yeah, but those cybers and crays look damn cool in the living room. i
especially like the cray 2's flourinert fountain. the connection
machine was pretty sweet with all those lights.

of course, many computing purests still swear by their dec pdp-11's.
go figure!

- paul artola
ellicott city,

Report message to a moderator

Re: Win98 drive size [message #59317 is a reply to message #59247]

Thu, 20 October 2005 06:01

Sound Dog

Messages: 44
Registered: October 2005

Member

ome ribbon cable, and
crimp away. Probably cost you fifty cents.

-Carl

"jef knight" <thestudio@allknightmusic.com> wrote in message
news:43579f98@linux...
> hey,
>
> do any of you have 2 spare jumpers for the eds1000 card that you could
> sell me? these are the little ones that connect the cards together.
> Mine, for some reason, are flakey.
>
> jefHey Shawn,

Do you have Wavelab? You can batch process with it. You would have
to render the files in Paris first, then batch them out to 0 start
wavs. I did this for a client last week and it worked flawlessly.

David.

ps. Thanks for the heads up, but we are well stocked on spares!

Shawn Johnsen wrote:

> Thanks Aaron,
>
> I'm on a PC running XP and Paris 3.0.
>
> Could you process "batches" of files as opposed to one file at a time (at
> 24 bit)?
>
> Shawn
>
>
> "Aaron Allen" <nospam@not_here.dude> wrote:
>
>>PC or Mac?
>>OS version?
>>Paris version?
>>
>>On XP I can't get the beta release of pafwav convertor to work on 16 bit
>
>
>>fi

Report message to a moderator

Re: Win98 drive size [message #59320 is a reply to message #59317]

Thu, 20 October 2005 07:29

John [1]

Messages: 2229
Registered: September 2005

Senior Member

ou have to do one at a time? I'd like
>>>to have access to the files to open in Cubase when I'm done (when Paris
>
> is
>
>>>gone...). Is this the best way to go about it?
>>>
>>>Thanks for any insight on this!
>>>
>>>Btw, you guys have been awesome. I've been "lurking" here daily since
>
>
>>>2001
>>>and you guys helped out with many of the questions and difficulties that
>>>we had. Thanks so much for your kindness and generousity!!
>>>
>>>All the best,
>>>
>>>Shawn
>>
>>
>Ya know........I'm getting fairly busy with mastering projects here. Just
'fer grins, I bought the Har Bal program. I don't think it is something that
is a magic bullet and will be a substitute for the hard work it takes to get
a good mix done. Not by any stretch, but I have been applying it to some
files that I previously mastered that I was 90% happy with and I have taken
these to around the 98% level. Since the last 2% will never be possible for
me (because this is the area where I second guess myself and every other
mastering job I've ever heard), I'm thinking this program can be an
extremely useful tool. I've only tried it with a couple of songs so far and
the results are subtle, but definitely a positive step.Thanks Dave-

I don't have Wavelab, but I was thinking of picking up a copy. Do you know
what versions this will work in? I think Steinberg.ca sells a copy for $99
(3.0). Thanks for the help!

Shawn

EK Sound <spamnot.info@eksoundNO.com> wrote:
>H

Report message to a moderator

Re: Win98 drive size [message #59324 is a reply to message #59320]

Thu, 20 October 2005 09:07

Sound Dog

Messages: 44
Registered: October 2005

Member

n updated V3). Essential does have
batch processing and would be a valuable addition to a Cubase rig. We
usually stock it, but I'm out right now.

David.

Shawn Johnsen wrote:

> Thanks Dave-
>
> I don't have Wavelab, but I was thinking of picking up a copy. Do you know
> what versions this will work in? I think Steinberg.ca sells a copy for $99
> (3.0). Thanks for the help!
>
> Shawn
>
>
> EK Sound <spamnot.info@eksoundNO.com> wrote:
>
>>Hey Shawn,
>>
>>Do you have Wavelab? You can batch process with it. You would have
>>to render the files in Paris first, then batch them out to 0 start
>>wavs. I did this for a client last week and it worked flawlessly.
>>
>>David.
>>
>>ps. Thanks for the heads up, but we are well stocked on spares!
>>
>>Shawn Johnsen wrote:
>>
>>
>>>Thanks Aaron,
>>>
>>>I'm on a PC running XP and Paris 3.0.
>>>
>>>Could you process "batches" of files as opposed to one file at a time
>
> (at
>
>>>24 bit)?
>>>
>>>Shawn
>>>
>>>
>>>"Aaron Allen" <nospam@not_here.dude> wrote:
>>>
>>>
>>>>PC or Mac?
>>>>OS version?
>>>>Paris version?
>>>>
>>>>On XP I can't get the beta release of pafwav convertor to work on 16 bit
>>>
>>>
>>>>files, only 24 bit FYI.. maybe someone here has had better luck..
>>>>
>>>>AA
>>>>
>>>>"Shawn Johnsen" <info@nospamsuperhitchcockradio.com> wrote in message
>
>
>>>>news:4356fd2e$1@linux...
>>>>
>>>>
>>>>>Hey Guys,
>>>>>
>>>>>I am probably going to be putting my Paris system up for sale this next
>>>
>>>
>>>>>week
>>>>>and was just curious if the paf-wav converter can be used to convert
>
> large
>
>>>>>amounts of files at a time or if you have to do one at a time? I'd like
>>>>>to have access to the files to open in Cubase when I'm done (when Paris
>>>
>>>is
>>>
>>>
>>>>>gone...). Is this the best way to go about it?
>

Report message to a moderator

Previous Topic:	Morgan's ribbon mic deal
Next Topic:	OT: Daddy has a new toy!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Dec 11 22:14:42 PST 2024

Total time taken to generate the page: 0.03443 seconds