The PARIS Forums


Home » The PARIS Forums » PARIS: Main » PARIS Not Working - HELP!! (Error Code 1/1)
PARIS Not Working - HELP!! [message #109054] Wed, 06 January 2016 22:45 Go to next message
raymack is currently offline  raymack   
Messages: 11
Registered: January 2016
Location: Texas
Junior Member
My PARIS system was working completely fine until I moved. I relocated to my new home, set up PARIS and had error code 1/1. After researching the code, I checked the connections and reinstalled the drivers several times and finally it launched. But, when I open a project, I get additional error messages and they are all different. If I launch PARIS and try to open a project 3 times, I now get three different error codes. Anyone have any ideas? I'm running a custom PC with Windows XP.
Re: PARIS Not Working - HELP!! [message #109055 is a reply to message #109054] Thu, 07 January 2016 01:35 Go to previous messageGo to next message
Kim W. is currently offline  Kim W.   AUSTRALIA
Messages: 189
Registered: January 2010
Location: Australia
Senior Member
Hi.
I seem to remember that the error 1/1 was due to EDS failure.
Not to say tat the card(s) are fried, just maybe the move has partially dislodged the EDS(s).
Re-seat the card(s). Maybe also clean the gold plated contacts on each card as well.

Kim.
Re: PARIS Not Working - HELP!! [message #109057 is a reply to message #109055] Thu, 07 January 2016 10:15 Go to previous messageGo to next message
kerryg is currently offline  kerryg   CANADA
Messages: 1529
Registered: February 2009
Senior Member
Administrator
Yup, looks like this: http://www.kerrygalloway.com/WikiPARIS/wikka.php?wakka=Error OneOne

Use an eraser to carefully clean the gold contacts that seat the card in the motherboard (electrical contact cleaning spray in the actual motherboard slot is useful too). Make certain everything's making solid electrical connection and then reinstall PARIS software to eliminate that as a possibility. before writing off the EDS card. In the event it's fried (which is not always the case with 1/1, that's often installation related) you can usually get a new one for $100 - $150 in the classifieds and get back up and running fairly quick. Record those additional error codes too: there's a collection of them and their meanings on the Wiki - http://www.kerrygalloway.com/WikiPARIS/wikka.php?wakka=BugsT roubleshooting - and they might have useful information.


"... being bitter is like swallowing poison and waiting for the other guy to die..." - anon

[Updated on: Thu, 07 January 2016 10:19]

Report message to a moderator

Re: PARIS Not Working - HELP!! [message #109062 is a reply to message #109057] Sat, 09 January 2016 09:53 Go to previous messageGo to next message
Will The Weirdo is currently offline  Will The Weirdo   
Messages: 190
Registered: December 2009
Location: On The Lake
Senior Member
Kerry, I must say I appreciate all the help you give everyone around here
Re: PARIS Not Working - HELP!! [message #109064 is a reply to message #109057] Sat, 09 January 2016 21:17 Go to previous messageGo to next message
raymack is currently offline  raymack   
Messages: 11
Registered: January 2016
Location: Texas
Junior Member
Well thanks KG for your help! I cleaned the contacts on the EDS card anyway and reinstalled the software and it worked! I can't tell you how thankful I am for this site!

I have another question I'm going to also post about submixes and the MEC expansion module. Thanks again!
Re: PARIS Not Working - HELP!! [message #109066 is a reply to message #109064] Sun, 10 January 2016 01:26 Go to previous messageGo to next message
Kim W. is currently offline  Kim W.   AUSTRALIA
Messages: 189
Registered: January 2010
Location: Australia
Senior Member
Hi again.
Great that you are up and running again.
Just a note about the error 1/1.
Computer cases can be rather flimsy, and some are built to low tolerances.
The EDS card (with daughterboard) is a a large and heavy beast.
Sometimes, the EDS card partially works its way out of the PCI slot with time and vibration, particularly when the system is moved.
Ususally, just reseating the EDS is sufficient to fix the error 1/1. Make sure it is fully home in the socket, by pushing firmly downward. If there seems to be a tendency for the card to slightly lift out of the PCI socket at the back end,(a common occurrence), then a little creative bending of the EDS backplate can fix the problem.
I personally have had to file the screw notch on a couple of my EDS's to allow the card to sit fully seated, once screwed in.
It depends on the construction of the case. (I've had to do this, even with a premium Antec case in the past.)
Hope this sheds some light on what you experienced.

Kim



Re: PARIS Not Working - HELP!! [message #109067 is a reply to message #109066] Sun, 10 January 2016 10:02 Go to previous messageGo to next message
raymack is currently offline  raymack   
Messages: 11
Registered: January 2016
Location: Texas
Junior Member
Thanks Kim! The contacts didn't appear dirty but I cleaned them anyway. I checked the card prior to my post and it was properly seated. It's also very hard to move so it doesn't shift at all. My system can be very unreliable at times and I have no idea why. I've moved several times in the last few years and I've always been very selective in how my PARIS equipment is handled. Sometimes it worked after moving and sometimes it didn't. I've even moved it from one room to another and sometimes it still won't work.

Hey I just posted a question about submixes and the MEC expansion module. Do you know anything about either of those?
Re: PARIS Not Working - HELP!! [message #109070 is a reply to message #109062] Sun, 10 January 2016 12:25 Go to previous messageGo to next message
kerryg is currently offline  kerryg   CANADA
Messages: 1529
Registered: February 2009
Senior Member
Administrator
Will The Weirdo wrote on Sat, 09 January 2016 09:53
Kerry, I must say I appreciate all the help you give everyone around here


Aw, thanks Will - since whatever I know, and everything I put on the Wiki, I got from folks doing the same either for me or for others, it seems right to pass that along when I can. Big ups to all our contributors here!


"... being bitter is like swallowing poison and waiting for the other guy to die..." - anon
Re: PARIS Not Working - HELP!! [message #109084 is a reply to message #109070] Sat, 30 January 2016 13:37 Go to previous messageGo to next message
danielcornelius is currently offline  danielcornelius   GERMANY
Messages: 171
Registered: May 2012
Senior Member
Hi all,

i have moved too, my paris stuff, i have on 2 different systems, 2 different MB the Error 1/1. In the past, both boards works well with paris. For testing Paris Hardware i am using Win XP at first system. I figured out, that PCI (Bridge)drivers from MB can make some Issus,in the past. But in my case i couldn't be. I am using a system Win 7 32bit with Mikes 1.02 Driver a the second system. Both the same error.....

Someone got an Idee, what it can happend ?

Use System with one EDS ,1x MEC loaded with 2 Adat, 8In 8Out.

Thx
Dan


----------------------------
- Asio Driver Cubase 5LE,Cubase 12
- Asus Z97-C, LGA 1150
- Intel i5 2320
- 32GB RAM
- 4x Seagate Barracuda 750GB
- Win10 64 bit

[Updated on: Fri, 08 April 2016 21:13]

Report message to a moderator

Re: PARIS Not Working - HELP!! [message #109085 is a reply to message #109084] Sun, 31 January 2016 11:03 Go to previous messageGo to next message
kerryg is currently offline  kerryg   CANADA
Messages: 1529
Registered: February 2009
Senior Member
Administrator
Hmmm... I don't know, you might have a relatively rare hardware failure there. Are any of your internal ribbon connectors crimped or kinked? While I've not seen that specifically with Paris I've seen that be the cause of a "cursed macintosh" which Apple couldn't fix even after first replacing the processor and then the motherboard.

"... being bitter is like swallowing poison and waiting for the other guy to die..." - anon
Re: PARIS Not Working - HELP!! [message #109086 is a reply to message #109085] Wed, 03 February 2016 09:20 Go to previous messageGo to next message
mikeaudet   CANADA
Messages: 477
Registered: February 2009
Location: Canada
Senior Member
Hi Dan,

Take a look at the SCSI connectors on the EDS cards. Look for any damage on the plastic spacers between where the pins go into the connector. A bad EDS cable can short out pins and fry components on the cards.

If this happens, sending the to The at TheSoniq is the only way to fix them.

I hope this isn't the case.

Do the cards show up in the device manager at all, even as unknown devices?

Keep us posted.

All the best,

Mike

Re: PARIS Not Working - HELP!! [message #109087 is a reply to message #109086] Wed, 03 February 2016 11:08 Go to previous messageGo to next message
danielcornelius is currently offline  danielcornelius   GERMANY
Messages: 171
Registered: May 2012
Senior Member
Hi mike,

thx for your replay, but the Cards work on a good old P4 system like they do. In my mind, it is something from Win 7 PCI bridge driver. But i don't figured out till yet.
I don't have the time to figure out that, but both boards are Z68 boards with i5 CPU. Some know this one ?
I am looking for a system with min. 4 PCI expansionsboard's, because the solution with expansionschassis haven't run very well.

But at this point i am using the good old P4 with 5 PCI,now.

THX to good Paris community ! Mike for your drivers, you still keep on roling Paris yeahh..
Dan


----------------------------
- Asio Driver Cubase 5LE,Cubase 12
- Asus Z97-C, LGA 1150
- Intel i5 2320
- 32GB RAM
- 4x Seagate Barracuda 750GB
- Win10 64 bit
Re: PARIS Not Working - HELP!! [message #109088 is a reply to message #109087] Wed, 03 February 2016 11:25 Go to previous messageGo to next message
mikeaudet   CANADA
Messages: 477
Registered: February 2009
Location: Canada
Senior Member
There were issues with PCI bridge chips on older Intel boards. I'm not sure which series it was or if it affected PARIS.

I wonder if it was those same bridge chips that caused problems with your expansion chassis.

I've had no issues with My Virtua via chassis and a z97a motherboard.

Keep us posted!

Mike
Re: PARIS Not Working - HELP!! [message #109089 is a reply to message #109088] Thu, 04 February 2016 09:54 Go to previous messageGo to next message
danielcornelius is currently offline  danielcornelius   GERMANY
Messages: 171
Registered: May 2012
Senior Member
@ Mike,

Z97 boards haven't any 33Mhz Pci slots, thats right ?

Dan


----------------------------
- Asio Driver Cubase 5LE,Cubase 12
- Asus Z97-C, LGA 1150
- Intel i5 2320
- 32GB RAM
- 4x Seagate Barracuda 750GB
- Win10 64 bit

[Updated on: Thu, 04 February 2016 09:55]

Report message to a moderator

Re: PARIS Not Working - HELP!! [message #109090 is a reply to message #109089] Thu, 04 February 2016 10:58 Go to previous message
mikeaudet   
Messages: 477
Registered: February 2009
Location: Canada
Senior Member
Mine has two!

https://www.asus.com/ca-en/Motherboards/Z97A/

I bought this over a year ago. They may have a newer version.

This looks like a slightly updated version:

https://www.asus.com/ca-en/Motherboards/Z97AUSB_31/

I hope this helps.

Mike
Previous Topic: Paris Pan Law
Next Topic: Windows 10 warning
Goto Forum:
  


Current Time: Thu Dec 05 19:31:49 PST 2024

Total time taken to generate the page: 0.06062 seconds