The PARIS Forums: PARIS: Main » Mec 2 indicates internal wc /Mec 1 external

Home » The PARIS Forums » PARIS: Main » Mec 2 indicates internal wc /Mec 1 external

Show: Today's Messages :: Polls :: Message Navigator

Mec 2 indicates internal wc /Mec 1 external [message #71903]

Wed, 30 August 2006 11:11

Eugene B
Messages: 35
Registered: August 2005

Member

When paris 3.0 boots i get this message;i/o modules in this patch setting
are not available in this configuration of paris.
The resulting audio may be different than when saved.

Mac G4,two mecs ext wc to UA2192
The mec has two 8 ins and one 8 out
Thanks Eugene

Report message to a moderator

Re: Mec 2 indicates internal wc /Mec 1 external [message #71905 is a reply to message #71903]

Wed, 30 August 2006 11:45

Tony Benson

Messages: 453
Registered: June 2006

Senior Member

Go to the patchbay window and make sure it only shows the i/o modules you
actually have available i.e. two MECs, two 8 ins, one 8 out, etc. in the
main window. I get this message on old projects from when I used to have an
ADAT card. If I go in to the patchbay, drag the ADAT module out and re-save
the project, the message goes away.

Tony

"Eugene B" <martinlancer@hotmail.com> wrote in message
news:44f5d4b9$1@linux...
>
> When paris 3.0 boots i get this message;i/o modules in this patch setting
> are not available in this configuration of paris.
> The resulting audio may be different than when saved.
>
> Mac G4,two mecs ext wc to UA2192
> The mec has two 8 ins and one 8 out
> Thanks Eugene

Report message to a moderator

Re: Mec 2 indicates internal wc /Mec 1 external [message #72015 is a reply to message #71905]

Sun, 03 September 2006 15:34

Eugene B
Messages: 35
Registered: August 2005

Member

The cable from the eds card to the second mec was slighly loose.
Thanks for the reply
Eugene

Tony Benson" <tony@standinghampton.com> wrote:
>Go to the patchbay window and make sure it only shows the i/o modules you

>actually have available i.e. two MECs, two 8 ins, one 8 out, etc. in the

>main window. I get this message on old projects from when I used to have
an
>ADAT card. If I go in to the patchbay, drag the ADAT module out and re-save

>the project, the message goes away.
>
>Tony
>
>
>"Eugene B" <martinlancer@hotmail.com> wrote in message
>news:44f5d4b9$1@linux...
>>
>> When paris 3.0 boots i get this message;i/o modules in this patch setting
>> are not available in this configuration of paris.
>> The resulting audio may be different than when saved.
>>
>> Mac G4,two mecs ext wc to UA2192
>> The mec has two 8 ins and one 8 out
>> Thanks Eugene
>
>

Report message to a moderator

Previous Topic:	Pay Dirt! Bruce Swedien tips
Next Topic:	Product review-SM Pro Audio MPatch

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat May 17 03:35:43 PDT 2025

Total time taken to generate the page: 0.03152 seconds