The PARIS Forums


Home » The PARIS Forums » PARIS: Main » antress modern plugs
antress modern plugs [message #91230] Wed, 10 October 2007 03:15 Go to next message
Kerr Mathieson is currently offline  Kerr Mathieson   UNITED KINGDOM
Messages: 39
Registered: September 2008
Member
hi guys

I can't seem to get those antress plug ins to show up in VST or in Paris.

I've got them in my vst plug ins folder, same as everything else.......

Is it possibly because I'm running ME still?

any help/ideas appreciated

thanks

Kerr
Re: antress modern plugs [message #91240 is a reply to message #91230] Wed, 10 October 2007 07:12 Go to previous messageGo to next message
Neil is currently offline  Neil
Messages: 1645
Registered: April 2006
Senior Member
First off, which packet did you download, AND did it un-rar
properly?

I ask because the installer pack worked for me, but the other
one didn't.

Neil


"Kerr Mathieson" <oneninehundred@virgin.net> wrote:
>hi guys
>
>I can't seem to get those antress plug ins to show up in VST or in Paris.
>
>I've got them in my vst plug ins folder, same as everything else.......
>
>Is it possibly because I'm running ME still?
>
>any help/ideas appreciated
>
>thanks
>
>Kerr
Re: antress modern plugs [message #91245 is a reply to message #91240] Wed, 10 October 2007 11:16 Go to previous messageGo to next message
Kerr Mathieson is currently offline  Kerr Mathieson   UNITED KINGDOM
Messages: 39
Registered: September 2008
Member
Hi neil,

I downloaded the pack with the installer in it and it seemed to unrar
properly,

then the exe file seemed to install properly as well.

I've just discovered that when I boot up Wavelab, it tries to run the plug
ins too and keeps giving me a message that there's a library file missing,
for every modern plug in. wierd. there's only a .dll file for each one
came from the exe file, so I'm kinda stuck!

thanks

Kerr
"Neil" <OIOIU@OIU.com> wrote in message news:470cddd0$1@linux...
>
> First off, which packet did you download, AND did it un-rar
> properly?
>
> I ask because the installer pack worked for me, but the other
> one didn't.
>
> Neil
>
>
> "Kerr Mathieson" <oneninehundred@virgin.net> wrote:
>>hi guys
>>
>>I can't seem to get those antress plug ins to show up in VST or in Paris.
>>
>>I've got them in my vst plug ins folder, same as everything else.......
>>
>>Is it possibly because I'm running ME still?
>>
>>any help/ideas appreciated
>>
>>thanks
>>
>>Kerr
>
Re: antress modern plugs [message #91248 is a reply to message #91245] Wed, 10 October 2007 13:33 Go to previous messageGo to next message
Neil is currently offline  Neil
Messages: 1645
Registered: April 2006
Senior Member
"Kerr Mathieson" <oneninehundred@virgin.net> wrote:
>Hi neil,
>
>I downloaded the pack with the installer in it and it seemed to unrar
>properly,
>
>then the exe file seemed to install properly as well.
>
>I've just discovered that when I boot up Wavelab, it tries to run the plug

>ins too and keeps giving me a message that there's a library file missing,

>for every modern plug in. wierd. there's only a .dll file for each one

>came from the exe file, so I'm kinda stuck!

In that case, I have a feeling that you may have installed them
into the wrong vstplugins folder. Is that possible? Do you have
more than one of those on your hard drive?

A .dll file IS a library file.

Neil
Re: antress modern plugs [message #91250 is a reply to message #91248] Wed, 10 October 2007 14:55 Go to previous messageGo to next message
Kerr Mathieson is currently offline  Kerr Mathieson   UNITED KINGDOM
Messages: 39
Registered: September 2008
Member
yeah, I double checked and checked again (and then once more!), they're in
the same plugins folder as everything else.

I knew the .dll files were library files, which is what confused me the most
about the wavelab message lol!

Think I'll download them in all forms and unpack/install and see what
happens. Still think it might be something to do with running ME though,
'cause the modern site says 2000/XP for system req.

hmmmmm

thanks

"Neil" <IOOI@OIU.com> wrote in message news:470d3717$1@linux...
>
> "Kerr Mathieson" <oneninehundred@virgin.net> wrote:
>>Hi neil,
>>
>>I downloaded the pack with the installer in it and it seemed to unrar
>>properly,
>>
>>then the exe file seemed to install properly as well.
>>
>>I've just discovered that when I boot up Wavelab, it tries to run the plug
>
>>ins too and keeps giving me a message that there's a library file missing,
>
>>for every modern plug in. wierd. there's only a .dll file for each one
>
>>came from the exe file, so I'm kinda stuck!
>
> In that case, I have a feeling that you may have installed them
> into the wrong vstplugins folder. Is that possible? Do you have
> more than one of those on your hard drive?
>
> A .dll file IS a library file.
>
> Neil
Re: antress modern plugs [message #91255 is a reply to message #91250] Wed, 10 October 2007 16:50 Go to previous messageGo to next message
Martin Harrington is currently offline  Martin Harrington   AUSTRALIA
Messages: 560
Registered: September 2005
Senior Member
Why on earth are you still running ME?
It is a dinosaur by today's standards.

Martin Harrington
Lend An Ear Sound
Sydney, Australia
0414913247

"Kerr Mathieson" <oneninehundred@virgin.net> wrote in message
news:470d4c41$1@linux...
> yeah, I double checked and checked again (and then once more!), they're in
> the same plugins folder as everything else.
>
> I knew the .dll files were library files, which is what confused me the
> most about the wavelab message lol!
>
> Think I'll download them in all forms and unpack/install and see what
> happens. Still think it might be something to do with running ME though,
> 'cause the modern site says 2000/XP for system req.
>
> hmmmmm
>
> thanks
>
> "Neil" <IOOI@OIU.com> wrote in message news:470d3717$1@linux...
>>
>> "Kerr Mathieson" <oneninehundred@virgin.net> wrote:
>>>Hi neil,
>>>
>>>I downloaded the pack with the installer in it and it seemed to unrar
>>>properly,
>>>
>>>then the exe file seemed to install properly as well.
>>>
>>>I've just discovered that when I boot up Wavelab, it tries to run the
>>>plug
>>
>>>ins too and keeps giving me a message that there's a library file
>>>missing,
>>
>>>for every modern plug in. wierd. there's only a .dll file for each one
>>
>>>came from the exe file, so I'm kinda stuck!
>>
>> In that case, I have a feeling that you may have installed them
>> into the wrong vstplugins folder. Is that possible? Do you have
>> more than one of those on your hard drive?
>>
>> A .dll file IS a library file.
>>
>> Neil
>
All types of Audio Post
Re: antress modern plugs [message #91278 is a reply to message #91230] Wed, 10 October 2007 23:05 Go to previous messageGo to next message
Erling is currently offline  Erling   NORWAY
Messages: 156
Registered: October 2008
Senior Member
If you're looking at their homesite, you will see they only workes
under Windows 2000/XP.

Erling

On Wed, 10 Oct 2007 11:15:27 +0100, "Kerr Mathieson"
<oneninehundred@virgin.net> wrote:

>hi guys
>
>I can't seem to get those antress plug ins to show up in VST or in Paris.
>
>I've got them in my vst plug ins folder, same as everything else.......
>
>Is it possibly because I'm running ME still?
>
>any help/ideas appreciated
>
>thanks
>
>Kerr
Re: antress modern plugs [message #91279 is a reply to message #91255] Thu, 11 October 2007 00:47 Go to previous messageGo to next message
Kerr Mathieson is currently offline  Kerr Mathieson   UNITED KINGDOM
Messages: 39
Registered: September 2008
Member
I'm using ME 'cause I know it runs Paris fine. I only use this machine for
paris and cubase, that's it. guess I might have to consider moving to XP if
I can be sure Paris runs ok

"Martin Harrington" <lendan@bigpond.net.au> wrote in message
news:470d66c5@linux...
> Why on earth are you still running ME?
> It is a dinosaur by today's standards.
>
> Martin Harrington
> Lend An Ear Sound
> Sydney, Australia
> 0414913247
>
> "Kerr Mathieson" <oneninehundred@virgin.net> wrote in message
> news:470d4c41$1@linux...
>> yeah, I double checked and checked again (and then once more!), they're
>> in the same plugins folder as everything else.
>>
>> I knew the .dll files were library files, which is what confused me the
>> most about the wavelab message lol!
>>
>> Think I'll download them in all forms and unpack/install and see what
>> happens. Still think it might be something to do with running ME though,
>> 'cause the modern site says 2000/XP for system req.
>>
>> hmmmmm
>>
>> thanks
>>
>> "Neil" <IOOI@OIU.com> wrote in message news:470d3717$1@linux...
>>>
>>> "Kerr Mathieson" <oneninehundred@virgin.net> wrote:
>>>>Hi neil,
>>>>
>>>>I downloaded the pack with the installer in it and it seemed to unrar
>>>>properly,
>>>>
>>>>then the exe file seemed to install properly as well.
>>>>
>>>>I've just discovered that when I boot up Wavelab, it tries to run the
>>>>plug
>>>
>>>>ins too and keeps giving me a message that there's a library file
>>>>missing,
>>>
>>>>for every modern plug in. wierd. there's only a .dll file for each one
>>>
>>>>came from the exe file, so I'm kinda stuck!
>>>
>>> In that case, I have a feeling that you may have installed them
>>> into the wrong vstplugins folder. Is that possible? Do you have
>>> more than one of those on your hard drive?
>>>
>>> A .dll file IS a library file.
>>>
>>> Neil
>>
> All types of Audio Post
Re: antress modern plugs [message #91283 is a reply to message #91279] Thu, 11 October 2007 03:29 Go to previous messageGo to next message
Martin Harrington is currently offline  Martin Harrington   AUSTRALIA
Messages: 560
Registered: September 2005
Senior Member
I ran Paris for years on XP, and never, never had any issues apart from the
lack of Paris functionality for my needs
--
Martin Harrington
Lend An Ear Sound
Sydney Australia
0414 913 247
"Kerr Mathieson" <oneninehundred@virgin.net> wrote in message
news:470dd6e1$1@linux...
> I'm using ME 'cause I know it runs Paris fine. I only use this machine
> for paris and cubase, that's it. guess I might have to consider moving to
> XP if I can be sure Paris runs ok
>
> "Martin Harrington" <lendan@bigpond.net.au> wrote in message
> news:470d66c5@linux...
>> Why on earth are you still running ME?
>> It is a dinosaur by today's standards.
>>
>> Martin Harrington
>> Lend An Ear Sound
>> Sydney, Australia
>> 0414913247
>>
>> "Kerr Mathieson" <oneninehundred@virgin.net> wrote in message
>> news:470d4c41$1@linux...
>>> yeah, I double checked and checked again (and then once more!), they're
>>> in the same plugins folder as everything else.
>>>
>>> I knew the .dll files were library files, which is what confused me the
>>> most about the wavelab message lol!
>>>
>>> Think I'll download them in all forms and unpack/install and see what
>>> happens. Still think it might be something to do with running ME
>>> though, 'cause the modern site says 2000/XP for system req.
>>>
>>> hmmmmm
>>>
>>> thanks
>>>
>>> "Neil" <IOOI@OIU.com> wrote in message news:470d3717$1@linux...
>>>>
>>>> "Kerr Mathieson" <oneninehundred@virgin.net> wrote:
>>>>>Hi neil,
>>>>>
>>>>>I downloaded the pack with the installer in it and it seemed to unrar
>>>>>properly,
>>>>>
>>>>>then the exe file seemed to install properly as well.
>>>>>
>>>>>I've just discovered that when I boot up Wavelab, it tries to run the
>>>>>plug
>>>>
>>>>>ins too and keeps giving me a message that there's a library file
>>>>>missing,
>>>>
>>>>>for every modern plug in. wierd. there's only a .dll file for each
>>>>>one
>>>>
>>>>>came from the exe file, so I'm kinda stuck!
>>>>
>>>> In that case, I have a feeling that you may have installed them
>>>> into the wrong vstplugins folder. Is that possible? Do you have
>>>> more than one of those on your hard drive?
>>>>
>>>> A .dll file IS a library file.
>>>>
>>>> Neil
>>>
>> All types of Audio Post
>
Re: antress modern plugs [message #91287 is a reply to message #91283] Thu, 11 October 2007 04:22 Go to previous messageGo to next message
John [1] is currently offline  John [1]
Messages: 2229
Registered: September 2005
Senior Member
A lot of it has to do with the motherboard. I found out the hard way that
my motherboard was not a good one and all I ever did was crash despite, knowing
every shared IRQ and ACPI mode. With daws it seems very important to get
the right motherboard. This is where Chris Ludwigs advice is so invaluable.
Chris has taken years off my life. hehe Of course, beyond motherboards
there is a jungle of other problems but for me that was the biggie.

John

"Martin Harrington" <lendan@bigpond.net.au> wrote:
>I ran Paris for years on XP, and never, never had any issues apart from
the
>lack of Paris functionality for my needs
>--
>Martin Harrington
>Lend An Ear Sound
>Sydney Australia
>0414 913 247
>"Kerr Mathieson" <oneninehundred@virgin.net> wrote in message
>news:470dd6e1$1@linux...
>> I'm using ME 'cause I know it runs Paris fine. I only use this machine

>> for paris and cubase, that's it. guess I might have to consider moving
to
>> XP if I can be sure Paris runs ok
>>
>> "Martin Harrington" <lendan@bigpond.net.au> wrote in message
>> news:470d66c5@linux...
>>> Why on earth are you still running ME?
>>> It is a dinosaur by today's standards.
>>>
>>> Martin Harrington
>>> Lend An Ear Sound
>>> Sydney, Australia
>>> 0414913247
>>>
>>> "Kerr Mathieson" <oneninehundred@virgin.net> wrote in message
>>> news:470d4c41$1@linux...
>>>> yeah, I double checked and checked again (and then once more!), they're

>>>> in the same plugins folder as everything else.
>>>>
>>>> I knew the .dll files were library files, which is what confused me
the
>>>> most about the wavelab message lol!
>>>>
>>>> Think I'll download them in all forms and unpack/install and see what

>>>> happens. Still think it might be something to do with running ME
>>>> though, 'cause the modern site says 2000/XP for system req.
>>>>
>>>> hmmmmm
>>>>
>>>> thanks
>>>>
>>>> "Neil" <IOOI@OIU.com> wrote in message news:470d3717$1@linux...
>>>>>
>>>>> "Kerr Mathieson" <oneninehundred@virgin.net> wrote:
>>>>>>Hi neil,
>>>>>>
>>>>>>I downloaded the pack with the installer in it and it seemed to unrar
>>>>>>properly,
>>>>>>
>>>>>>then the exe file seemed to install properly as well.
>>>>>>
>>>>>>I've just discovered that when I boot up Wavelab, it tries to run the

>>>>>>plug
>>>>>
>>>>>>ins too and keeps giving me a message that there's a library file
>>>>>>missing,
>>>>>
>>>>>>for every modern plug in. wierd. there's only a .dll file for each

>>>>>>one
>>>>>
>>>>>>came from the exe file, so I'm kinda stuck!
>>>>>
>>>>> In that case, I have a feeling that you may have installed them
>>>>> into the wrong vstplugins folder. Is that possible? Do you have
>>>>> more than one of those on your hard drive?
>>>>>
>>>>> A .dll file IS a library file.
>>>>>
>>>>> Neil
>>>>
>>> All types of Audio Post
>>
>
Re: antress modern plugs [message #91292 is a reply to message #91283] Thu, 11 October 2007 06:47 Go to previous messageGo to next message
John Macy is currently offline  John Macy
Messages: 242
Registered: April 2006
Senior Member
"Why on earth are you still running ME?
It is a dinosaur by today's standards."

Hey---I resemble that...)




"Martin Harrington" <lendan@bigpond.net.au> wrote:
>I ran Paris for years on XP, and never, never had any issues apart from
the
>lack of Paris functionality for my needs
>--
>Martin Harrington
>Lend An Ear Sound
>Sydney Australia
>0414 913 247
>"Kerr Mathieson" <oneninehundred@virgin.net> wrote in message
>news:470dd6e1$1@linux...
>> I'm using ME 'cause I know it runs Paris fine. I only use this machine

>> for paris and cubase, that's it. guess I might have to consider moving
to
>> XP if I can be sure Paris runs ok
>>
>> "Martin Harrington" <lendan@bigpond.net.au> wrote in message
>> news:470d66c5@linux...
>>> Why on earth are you still running ME?
>>> It is a dinosaur by today's standards.
>>>
>>> Martin Harrington
>>> Lend An Ear Sound
>>> Sydney, Australia
>>> 0414913247
>>>
>>> "Kerr Mathieson" <oneninehundred@virgin.net> wrote in message
>>> news:470d4c41$1@linux...
>>>> yeah, I double checked and checked again (and then once more!), they're

>>>> in the same plugins folder as everything else.
>>>>
>>>> I knew the .dll files were library files, which is what confused me
the
>>>> most about the wavelab message lol!
>>>>
>>>> Think I'll download them in all forms and unpack/install and see what

>>>> happens. Still think it might be something to do with running ME
>>>> though, 'cause the modern site says 2000/XP for system req.
>>>>
>>>> hmmmmm
>>>>
>>>> thanks
>>>>
>>>> "Neil" <IOOI@OIU.com> wrote in message news:470d3717$1@linux...
>>>>>
>>>>> "Kerr Mathieson" <oneninehundred@virgin.net> wrote:
>>>>>>Hi neil,
>>>>>>
>>>>>>I downloaded the pack with the installer in it and it seemed to unrar
>>>>>>properly,
>>>>>>
>>>>>>then the exe file seemed to install properly as well.
>>>>>>
>>>>>>I've just discovered that when I boot up Wavelab, it tries to run the

>>>>>>plug
>>>>>
>>>>>>ins too and keeps giving me a message that there's a library file
>>>>>>missing,
>>>>>
>>>>>>for every modern plug in. wierd. there's only a .dll file for each

>>>>>>one
>>>>>
>>>>>>came from the exe file, so I'm kinda stuck!
>>>>>
>>>>> In that case, I have a feeling that you may have installed them
>>>>> into the wrong vstplugins folder. Is that possible? Do you have
>>>>> more than one of those on your hard drive?
>>>>>
>>>>> A .dll file IS a library file.
>>>>>
>>>>> Neil
>>>>
>>> All types of Audio Post
>>
>
Re: antress modern plugs [message #91319 is a reply to message #91292] Thu, 11 October 2007 13:11 Go to previous messageGo to next message
Rich[3] is currently offline  Rich[3]
Messages: 132
Registered: January 2006
Senior Member
But oh so stable for Paris - I still use 98 and never have any issues except
installing 98 on a PC is a pain in the A%**^* until you have all the PC drivers
(if they are aval still)....

"John Macy" <spamlessjohn@johnmacy.com> wrote:
>
>"Why on earth are you still running ME?
>It is a dinosaur by today's standards."
>
>Hey---I resemble that...)
>
>
>
>
>"Martin Harrington" <lendan@bigpond.net.au> wrote:
>>I ran Paris for years on XP, and never, never had any issues apart from
>the
>>lack of Paris functionality for my needs
>>--
>>Martin Harrington
>>Lend An Ear Sound
>>Sydney Australia
>>0414 913 247
>>"Kerr Mathieson" <oneninehundred@virgin.net> wrote in message
>>news:470dd6e1$1@linux...
>>> I'm using ME 'cause I know it runs Paris fine. I only use this machine
>
>>> for paris and cubase, that's it. guess I might have to consider moving
>to
>>> XP if I can be sure Paris runs ok
>>>
>>> "Martin Harrington" <lendan@bigpond.net.au> wrote in message
>>> news:470d66c5@linux...
>>>> Why on earth are you still running ME?
>>>> It is a dinosaur by today's standards.
>>>>
>>>> Martin Harrington
>>>> Lend An Ear Sound
>>>> Sydney, Australia
>>>> 0414913247
>>>>
>>>> "Kerr Mathieson" <oneninehundred@virgin.net> wrote in message
>>>> news:470d4c41$1@linux...
>>>>> yeah, I double checked and checked again (and then once more!), they're
>
>>>>> in the same plugins folder as everything else.
>>>>>
>>>>> I knew the .dll files were library files, which is what confused me
>the
>>>>> most about the wavelab message lol!
>>>>>
>>>>> Think I'll download them in all forms and unpack/install and see what
>
>>>>> happens. Still think it might be something to do with running ME
>>>>> though, 'cause the modern site says 2000/XP for system req.
>>>>>
>>>>> hmmmmm
>>>>>
>>>>> thanks
>>>>>
>>>>> "Neil" <IOOI@OIU.com> wrote in message news:470d3717$1@linux...
>>>>>>
>>>>>> "Kerr Mathieson" <oneninehundred@virgin.net> wrote:
>>>>>>>Hi neil,
>>>>>>>
>>>>>>>I downloaded the pack with the installer in it and it seemed to unrar
>>>>>>>properly,
>>>>>>>
>>>>>>>then the exe file seemed to install properly as well.
>>>>>>>
>>>>>>>I've just discovered that when I boot up Wavelab, it tries to run
the
>
>>>>>>>plug
>>>>>>
>>>>>>>ins too and keeps giving me a message that there's a library file

>>>>>>>missing,
>>>>>>
>>>>>>>for every modern plug in. wierd. there's only a .dll file for each
>
>>>>>>>one
>>>>>>
>>>>>>>came from the exe file, so I'm kinda stuck!
>>>>>>
>>>>>> In that case, I have a feeling that you may have installed them
>>>>>> into the wrong vstplugins folder. Is that possible? Do you have
>>>>>> more than one of those on your hard drive?
>>>>>>
>>>>>> A .dll file IS a library file.
>>>>>>
>>>>>> Neil
>>>>>
>>>> All types of Audio Post
>>>
>>
>
Re: antress modern plugs [message #91325 is a reply to message #91319] Thu, 11 October 2007 17:39 Go to previous message
Martin Harrington is currently offline  Martin Harrington   AUSTRALIA
Messages: 560
Registered: September 2005
Senior Member
I rest my case, Gentlemen, (and Lady).
--
Martin Harrington
Lend An Ear Sound
Sydney Australia
0414 913 247
"Rich" <studiodog_99@yahoo.com> wrote in message news:470e8363$1@linux...
>
> But oh so stable for Paris - I still use 98 and never have any issues
> except
> installing 98 on a PC is a pain in the A%**^* until you have all the PC
> drivers
> (if they are aval still)....
>
> "John Macy" <spamlessjohn@johnmacy.com> wrote:
>>
>>"Why on earth are you still running ME?
>>It is a dinosaur by today's standards."
>>
>>Hey---I resemble that...)
>>
>>
>>
>>
>>"Martin Harrington" <lendan@bigpond.net.au> wrote:
>>>I ran Paris for years on XP, and never, never had any issues apart from
>>the
>>>lack of Paris functionality for my needs
>>>--
>>>Martin Harrington
>>>Lend An Ear Sound
>>>Sydney Australia
>>>0414 913 247
>>>"Kerr Mathieson" <oneninehundred@virgin.net> wrote in message
>>>news:470dd6e1$1@linux...
>>>> I'm using ME 'cause I know it runs Paris fine. I only use this machine
>>
>>>> for paris and cubase, that's it. guess I might have to consider moving
>>to
>>>> XP if I can be sure Paris runs ok
>>>>
>>>> "Martin Harrington" <lendan@bigpond.net.au> wrote in message
>>>> news:470d66c5@linux...
>>>>> Why on earth are you still running ME?
>>>>> It is a dinosaur by today's standards.
>>>>>
>>>>> Martin Harrington
>>>>> Lend An Ear Sound
>>>>> Sydney, Australia
>>>>> 0414913247
>>>>>
>>>>> "Kerr Mathieson" <oneninehundred@virgin.net> wrote in message
>>>>> news:470d4c41$1@linux...
>>>>>> yeah, I double checked and checked again (and then once more!),
>>>>>> they're
>>
>>>>>> in the same plugins folder as everything else.
>>>>>>
>>>>>> I knew the .dll files were library files, which is what confused me
>>the
>>>>>> most about the wavelab message lol!
>>>>>>
>>>>>> Think I'll download them in all forms and unpack/install and see what
>>
>>>>>> happens. Still think it might be something to do with running ME
>>>>>> though, 'cause the modern site says 2000/XP for system req.
>>>>>>
>>>>>> hmmmmm
>>>>>>
>>>>>> thanks
>>>>>>
>>>>>> "Neil" <IOOI@OIU.com> wrote in message news:470d3717$1@linux...
>>>>>>>
>>>>>>> "Kerr Mathieson" <oneninehundred@virgin.net> wrote:
>>>>>>>>Hi neil,
>>>>>>>>
>>>>>>>>I downloaded the pack with the installer in it and it seemed to
>>>>>>>>unrar
>>>>>>>>properly,
>>>>>>>>
>>>>>>>>then the exe file seemed to install properly as well.
>>>>>>>>
>>>>>>>>I've just discovered that when I boot up Wavelab, it tries to run
> the
>>
>>>>>>>>plug
>>>>>>>
>>>>>>>>ins too and keeps giving me a message that there's a library file
>
>>>>>>>>missing,
>>>>>>>
>>>>>>>>for every modern plug in. wierd. there's only a .dll file for each
>>
>>>>>>>>one
>>>>>>>
>>>>>>>>came from the exe file, so I'm kinda stuck!
>>>>>>>
>>>>>>> In that case, I have a feeling that you may have installed them
>>>>>>> into the wrong vstplugins folder. Is that possible? Do you have
>>>>>>> more than one of those on your hard drive?
>>>>>>>
>>>>>>> A .dll file IS a library file.
>>>>>>>
>>>>>>> Neil
>>>>>>
>>>>> All types of Audio Post
>>>>
>>>
>>
>
Previous Topic: THAD..Check Out this Video
Next Topic: ******The Ducker 1.0 Released*******
Goto Forum:
  


Current Time: Tue Nov 19 01:02:30 PST 2024

Total time taken to generate the page: 0.01318 seconds