Home » The PARIS Forums » PARIS: Main » I hate this!
| I hate this! [message #59379] |
Fri, 21 October 2005 17:34  |
DC
Messages: 722
Registered: July 2005
|
Senior Member |
|
|
r />
>>
>> Hi James,
>>
>> It starts with a good guitar, well setup. Your Ibanez can be setup to
>> sound good, and a new guitar will need the same thing too.
>> You can get away with murder live, but when recording, a bad setup
>> will become quickly and painfully obvious.
>>
>> Setup is getting the neck straight, checking and maybe dressing
>> the frets, dialing in the intonation, setting the nut height, setting
the
>> PU height. These things will make a huge difference. Get a pro
>> to do this for you. It is worth the 50 bucks or so.
>>
>> Get a *good* tuner. this is vital. I use a Peterson V-Sam.
>><
|
|
|
|
|
|
| Re: I hate this! [message #59391 is a reply to message #59379] |
Sat, 22 October 2005 02:44  |
Kim
Messages: 1246
Registered: October 2005
|
Senior Member |
|
|
drive is listed by
>brand name, you are good. If it is listed as "Generic", you need to load
>the proper drivers.
>
>* Msconfig.exe can be used to minimize what is loaded at startup.
>
>
>Desktop Properties
>---------------------------
>* De-activate Screen Saver: Right click desktop, Properties, Screen
>Saver, 'None'.
>* Remove Wallpapers: Right click Desktop. Properties, Background tab,
>select "none"
>* Animation Desktop, right mouse click, Properties, Effects, un-check
>'Animate windows, menus and lists'.
>
>Control Pane
>----------------------------
>* De-activate Power management. Control Panel / Power Management /
>power scheme 'Always on'. Set 'System Standby' and 'Turn off hard disks'
>to 'Never'. Set monitor to anything.
>* Disable System sounds. Control Panel / Sounds, choose scheme 'No sounds'.
>
>* Exit Task scheduler. Start the program with a double click, choose
>'Exit Task scheduler' under Options, and its gone or check msconfig startup
>
>Open your registry and find the key below. There should be a value
>named 'SchedulingAgent' which is set to equal 'mstask.exe',
>th
|
|
|
|
| Re: I hate this! [message #59398 is a reply to message #59379] |
Sat, 22 October 2005 07:01 |
jef knight[1]
Messages: 201
Registered: October 2005
|
Senior Member |
|
|
atrox PCI card is recognized, then right click on
your desktop, go to your settings window and set it up for dual monitors. If
this works (and it should), then shut the system down, reinstall the AGP
card and reboot the system. Go to the device manager and make sure both
cards are now recognized. If so, again right click on the desktop and go to
the settings window, make sure both cards are confiugured for dual monitors.
Once that is done, right click on each desktop and it will show which of
your monitors is hooked up to the corresponding head of each video card. Set
your screen resolutions to what you need. You may also need to physically
switch monitors between video cards until you get the situation you want
between monitors 1, 2, 3 and 4.
My phone # is 970-375-7081. You are welcome to give me a call today if you
get stuck. I'm doing studio maintenance and will have time to help. Tomorrow
I'm in session most of the day and next week I may be hard to catch.
;
|
|
|
|
|
|
| Re: I hate this! [message #59402 is a reply to message #59391] |
Sat, 22 October 2005 08:43 |
Jamie K
Messages: 1115
Registered: July 2006
|
Senior Member |
|
|
e problem, so
outages
> > should be in the realm of under an hour.
> >
> > But there may be brief outages from time to time over the next few
weeks,
> > as there have been today. Just letting you know. I'll no doubt inform
you
> > again nearer the time I'm actually moving house.
> >
> > Cheers,
> > Kim.Deej,
You're awesome Dude! Thanks.
Luiz
"Luiz" <orspamno@gmail.com> wrote:
>
>Hi gang,
>
>I just installed a Matrox G450 PCI card - I already had a G450 AGP installed
> with no problems using whatever drivers came with Windows XP. The new PCI
>card does not get recognized by WinXP, and I get the "Hardware Update Wizard"
>screen. As per your previous suggestions here, I did not try using Matrox's
>own drivers, but I can't get WinXP to recognize the G450 PCI card. If the
>driver for it is indeed there, where do I find it? Any suggestions would
>be very much appreciated.
>I've got the card installed on the slot immediately under the AGP card since
>they share the same IRQ. I've got an ASUS A7S333 mobo, WinXP SP2. Deej please
>help!
>
>Thanks.
>
>LuizHi again guys,
I solved the problem of getting the two Matrox G450 cards to work (AGP &
PCI). Thanks Deej!
Well, now I would like to know how to clone the images of monitors 1 & 2
on monitors 3 & 4. I know this can be done using the Matrox drivers and utilities
software, but since I'm not using that due to the problems with their drivers,
I was wondering if anybody knew how to do it with the windows drivers - or
if it's possible.
Thanks for the help.
LuizYou guys rock! Thanks for all your recommendations. Some day I will get
a good Guitar pre, and tube amp. Right now I think I need to go with a processor
box. The reality is I'm a drummer not a guitar player, a $60K rig won't
fix my deficiencies. As the guy said in the movie Crossroads, "you play
like bird shit", that's me. I really am at a amateur night, demo kind of
a level, so quality equipment may not be able to save me.
I was hoping that if I put the time in to cutting tracks myself, that most
would be of high enough quality sound wise that they would be keepers. I
was trying to avoid the buying, trying selling thing. I guess I was hoping
for a magic bullet box that would give me versatility, and authentic amped
sound, enough to fool 95 % of the peopl
|
|
|
|
Goto Forum:
Current Time: Fri Dec 27 06:58:25 PST 2024
Total time taken to generate the page: 0.01796 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
