The PARIS Forums


Home » The PARIS Forums » PARIS: Main » Cubase Scope card clocking issue. David, Aaron or Dimitrios ?
Cubase Scope card clocking issue. David, Aaron or Dimitrios ? [message #93179] Thu, 29 November 2007 12:25 Go to next message
Tom Bruhl is currently offline  Tom Bruhl   UNITED STATES
Messages: 1368
Registered: June 2007
Senior Member
This is a multi-part message in MIME format.

------=_NextPart_000_0065_01C8329C.032AE950
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Hi guys,
I finally have Paris back up and running with Mecs and all.
Now Cubase SX 2.1 doesn't like running because of clocking issues.
I am using a Scope Pro card. Cubase will no longer start up
without Scope running! That's backwards from what was working=20
in the past. Now with both running it's a clickfest along with the=20
inevitable crash as the two are fighting for the hardware resources. =20
With Scope off Cubase gives the white screen of death at start up =
looking for clock.

With Scope off I used to send Paris (XP) ADAT optical to and from 16 =
channels of=20
Scope ADAT. Using Scope card settings at 'Sync/ADAT'. Now, whenever I =
set it=20
to that it doesn't retain the settings and goes back to 'Master/SPDIF'
whether it's plugged into Paris ADAT/SPDIF or not. I've also tried =
another
ADAT machine as the source which had been working while my Mecs were =
down.
That doesn't work either.

What am I missing here?

Thanks,
Tom


=20


I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
------=_NextPart_000_0065_01C8329C.032AE950
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Hi guys,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I finally have Paris back up and =
running with Mecs=20
and all.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Now Cubase SX 2.1 doesn't like running =
because of=20
clocking issues.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I am using a Scope Pro card.&nbsp; =
Cubase will no=20
longer start up</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>without Scope running!&nbsp; That's =
backwards from=20
what was working </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>in the past. </FONT><FONT face=3DArial =
size=3D2>Now=20
with both running it's a clickfest along with the </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>inevitable crash </FONT><FONT =
face=3DArial size=3D2>as=20
the two are fighting for the hardware resources.&nbsp; </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>With Scope off Cubase gives the white =
screen of=20
death at start up looking for clock.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>With Scope off I used to send =
</FONT><FONT=20
face=3DArial size=3D2>Paris (XP) ADAT optical to and from 16 channels of =

</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Scope ADAT.&nbsp; </FONT><FONT =
face=3DArial=20
size=3D2>Using&nbsp;Scope card settings&nbsp;at&nbsp;'Sync/ADAT'.&nbsp; =
Now,=20
whenever I set it </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>to that it doesn't retain the settings =
and goes=20
back to 'Master/SPDIF'</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>whether it's plugged into Paris =
ADAT/SPDIF or=20
not.&nbsp; I've also tried another</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>ADAT machine as the source which had =
been working=20
while my Mecs were down.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>That doesn't work either.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>What am I missing here?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Thanks,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>&nbsp;&nbsp;</FONT>&nbsp;</DIV>
<DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
and=20
you?<BR><A=20
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A>&nbsp;&nbsp;&nbsp;</FONT></DIV></BODY ></HTML>

------=_NextPart_000_0065_01C8329C.032AE950--
Re: Cubase Scope card clocking issue. David, Aaron or Dimitrios ? [message #93182 is a reply to message #93179] Thu, 29 November 2007 15:12 Go to previous messageGo to next message
Tom Bruhl is currently offline  Tom Bruhl   UNITED STATES
Messages: 1368
Registered: June 2007
Senior Member
This is a multi-part message in MIME format.

------=_NextPart_000_0085_01C832B3.62BE69C0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Got it. The changes can be made with in Cubase. Didn't find that
the last time through this. I had been going to Scope to change =
settings.
Anyway with some switching and three reboots we are back on track.
No clicks or pops and all ins/outs are working.

Thanks for making me think.
Tom

"Tom Bruhl" <arpegio@comcast.net> wrote in message =
news:474f20bb$1@linux...
Hi guys,
I finally have Paris back up and running with Mecs and all.
Now Cubase SX 2.1 doesn't like running because of clocking issues.
I am using a Scope Pro card. Cubase will no longer start up
without Scope running! That's backwards from what was working=20
in the past. Now with both running it's a clickfest along with the=20
inevitable crash as the two are fighting for the hardware resources. =20
With Scope off Cubase gives the white screen of death at start up =
looking for clock.

With Scope off I used to send Paris (XP) ADAT optical to and from 16 =
channels of=20
Scope ADAT. Using Scope card settings at 'Sync/ADAT'. Now, whenever =
I set it=20
to that it doesn't retain the settings and goes back to 'Master/SPDIF'
whether it's plugged into Paris ADAT/SPDIF or not. I've also tried =
another
ADAT machine as the source which had been working while my Mecs were =
down.
That doesn't work either.

What am I missing here?

Thanks,
Tom


=20


I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
------=_NextPart_000_0085_01C832B3.62BE69C0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Got it.&nbsp; The changes can be made =
with in=20
Cubase.&nbsp; Didn't find that</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>the last time through this.&nbsp; I had =
been going=20
to Scope to change settings.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Anyway with some switching and three =
reboots=20
</FONT><FONT face=3DArial size=3D2>we are back on track.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>No clicks or pops and all ins/outs are=20
working.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Thanks for making me =
think.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Tom Bruhl" &lt;<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>&gt; wrote =
in message=20
<A href=3D"news:474f20bb$1@linux">news:474f20bb$1@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>Hi guys,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I finally have Paris back up and =
running with=20
Mecs and all.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Now Cubase SX 2.1 doesn't like =
running because of=20
clocking issues.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I am using a Scope Pro card.&nbsp; =
Cubase will no=20
longer start up</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>without Scope running!&nbsp; That's =
backwards=20
from what was working </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>in the past. </FONT><FONT =
face=3DArial size=3D2>Now=20
with both running it's a clickfest along with the </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>inevitable crash </FONT><FONT =
face=3DArial=20
size=3D2>as the two are fighting for the hardware resources.&nbsp; =
</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>With Scope off Cubase gives the white =
screen of=20
death at start up looking for clock.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>With Scope off I used to send =
</FONT><FONT=20
face=3DArial size=3D2>Paris (XP) ADAT optical to and from 16 channels =
of=20
</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Scope ADAT.&nbsp; </FONT><FONT =
face=3DArial=20
size=3D2>Using&nbsp;Scope card =
settings&nbsp;at&nbsp;'Sync/ADAT'.&nbsp; Now,=20
whenever I set it </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>to that it doesn't retain the =
settings and goes=20
back to 'Master/SPDIF'</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>whether it's plugged into Paris =
ADAT/SPDIF or=20
not.&nbsp; I've also tried another</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>ADAT machine as the source which had =
been working=20
while my Mecs were down.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>That doesn't work =
either.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>What am I missing here?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Thanks,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>&nbsp;&nbsp;</FONT>&nbsp;</DIV>
<DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
and=20
you?<BR><A=20
=
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A>&nbsp;&nbsp;&nbsp;</FONT></DIV></BLOCKQUOTE ></BODY></HTML>

------=_NextPart_000_0085_01C832B3.62BE69C0--
Re: Cubase Scope card clocking issue. David, Aaron or Dimitrios ? [message #93184 is a reply to message #93182] Thu, 29 November 2007 17:51 Go to previous messageGo to next message
Dimitrios is currently offline  Dimitrios   
Messages: 1056
Registered: August 2005
Senior Member
Dear Tom,
Please do not forget always start first scope and then Cubase !
If you close first scope then you will have a problem and only a restart
of computer can bring things up.
So when closing, close first Cubase and then Scope.
If you wanna cahnge settings, like master/slave, 44.1-48khz, ect, FIRST cloae
Cubase , make settings from within scope envirement and then open Cubase,
Regards,
Dimitrios

"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>Got it. The changes can be made with in Cubase. Didn't find that
>the last time through this. I had been going to Scope to change =
>settings.
>Anyway with some switching and three reboots we are back on track.
>No clicks or pops and all ins/outs are working.
>
>Thanks for making me think.
>Tom
>
> "Tom Bruhl" <arpegio@comcast.net> wrote in message =
>news:474f20bb$1@linux...
> Hi guys,
> I finally have Paris back up and running with Mecs and all.
> Now Cubase SX 2.1 doesn't like running because of clocking issues.
> I am using a Scope Pro card. Cubase will no longer start up
> without Scope running! That's backwards from what was working=20
> in the past. Now with both running it's a clickfest along with the=20
> inevitable crash as the two are fighting for the hardware resources. =20
> With Scope off Cubase gives the white screen of death at start up =
>looking for clock.
>
> With Scope off I used to send Paris (XP) ADAT optical to and from 16 =
>channels of=20
> Scope ADAT. Using Scope card settings at 'Sync/ADAT'. Now, whenever
=
>I set it=20
> to that it doesn't retain the settings and goes back to 'Master/SPDIF'
> whether it's plugged into Paris ADAT/SPDIF or not. I've also tried =
>another
> ADAT machine as the source which had been working while my Mecs were =
>down.
> That doesn't work either.
>
> What am I missing here?
>
> Thanks,
> Tom
>
>
> =20
>
>
> I choose Polesoft Lockspam to fight spam, and you?
> http://www.polesoft.com/refer.html
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3DContent-Type content=3D"text/html; =
>charset=3Diso-8859-1">
><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D#ffffff>
><DIV><FONT face=3DArial size=3D2>Got it.  The changes can be made =
>with in=20
>Cubase.  Didn't find that</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>the last time through this.  I had =
>been going=20
>to Scope to change settings.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Anyway with some switching and three =
>reboots=20
></FONT><FONT face=3DArial size=3D2>we are back on track.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>No clicks or pops and all ins/outs are=20
>working.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><DIV><FONT face=3DArial size=3D2>Thanks for making me =
>think.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><BLOCKQUOTE dir=3Dltr=20
>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Tom Bruhl" <<A=20
> href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> wrote =
>in message=20
> <A href=3D"news:474f20bb$1@linux">news:474f20bb$1@linux</A>...</DIV>
> <DIV><FONT face=3DArial size=3D2>Hi guys,</FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>I finally have Paris back up and =
>running with=20
> Mecs and all.</FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>Now Cubase SX 2.1 doesn't like =
>running because of=20
> clocking issues.</FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>I am using a Scope Pro card.  =
>Cubase will no=20
> longer start up</FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>without Scope running!  That's =
>backwards=20
> from what was working </FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>in the past. </FONT><FONT =
>face=3DArial size=3D2>Now=20
> with both running it's a clickfest along with the </FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>inevitable crash </FONT><FONT =
>face=3DArial=20
> size=3D2>as the two are fighting for the hardware resources.  =
></FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>With Scope off Cubase gives the white
=
>screen of=20
> death at start up looking for clock.</FONT></DIV>
> <DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> <DIV><FONT face=3DArial size=3D2>With Scope off I used to send =
></FONT><FONT=20
> face=3DArial size=3D2>Paris (XP) ADAT optical to and from 16 channels
=
>of=20
> </FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>Scope ADAT.  </FONT><FONT =
>face=3DArial=20
> size=3D2>Using Scope card =
>settings at 'Sync/ADAT'.  Now,=20
> whenever I set it </FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>to that it doesn't retain the =
>settings and goes=20
> back to 'Master/SPDIF'</FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>whether it's plugged into Paris =
>ADAT/SPDIF or=20
> not.  I've also tried another</FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>ADAT machine as the source which had
=
>been working=20
> while my Mecs were down.</FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>That doesn't work =
>either.</FONT></DIV>
> <DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> <DIV><FONT face=3DArial size=3D2>What am I missing here?</FONT></DIV>
> <DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> <DIV><FONT face=3DArial size=3D2>Thanks,</FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
> <DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> <DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> <DIV><FONT face=3DArial size=3D2>  </FONT> </DIV>
> <DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam,
=
>and=20
> you?<BR><A=20
> =
>href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
>.html</A>   </FONT></DIV></BLOCKQUOTE></BODY></HTML>
>
>
Re: Cubase Scope card clocking issue. David, Aaron or Dimitrios ? [message #93187 is a reply to message #93184] Thu, 29 November 2007 18:45 Go to previous message
Tom Bruhl is currently offline  Tom Bruhl   UNITED STATES
Messages: 1368
Registered: June 2007
Senior Member
This is a multi-part message in MIME format.

------=_NextPart_000_00C1_01C832D1.20639550
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Hey Dimitrios,
Really? I've been very lucky just leaving Scope closed once the =
settings
are correct. I had been making those changes in Scope but they weren't
staying as I left them even though I saved them to a Scope Project. =
They'd switch
right back to unwanted settings and Cubase wouldn't start right.
Of course I'm not using Scope much yet. Just for it's hardware
and softsynths so far in XTC mode.

I got things working when editing the same paramenters for Scope clock, =
sync,
sample rate inside of Cubase.

I seem to be ok again. I have a bunch of mixes that need to be finished =
before
I really implement some of your great ideas. The auto latency comp for =
Paris
is first on the list!!! Is that working for you?
Cheers,
Tom


"Dimitrios" <musurgio@otenet.gr> wrote in message =
news:474f5ea7$1@linux...

Dear Tom,
Please do not forget always start first scope and then Cubase !
If you close first scope then you will have a problem and only a =
restart
of computer can bring things up.
So when closing, close first Cubase and then Scope.
If you wanna cahnge settings, like master/slave, 44.1-48khz, ect, =
FIRST cloae
Cubase , make settings from within scope envirement and then open =
Cubase,
Regards,
Dimitrios

"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>Got it. The changes can be made with in Cubase. Didn't find that
>the last time through this. I had been going to Scope to change =3D
>settings.
>Anyway with some switching and three reboots we are back on track.
>No clicks or pops and all ins/outs are working.
>
>Thanks for making me think.
>Tom
>
> "Tom Bruhl" <arpegio@comcast.net> wrote in message =3D
>news:474f20bb$1@linux...
> Hi guys,
> I finally have Paris back up and running with Mecs and all.
> Now Cubase SX 2.1 doesn't like running because of clocking issues.
> I am using a Scope Pro card. Cubase will no longer start up
> without Scope running! That's backwards from what was working=3D20
> in the past. Now with both running it's a clickfest along with =
the=3D20
> inevitable crash as the two are fighting for the hardware =
resources. =3D20
> With Scope off Cubase gives the white screen of death at start up =
=3D
>looking for clock.
>
> With Scope off I used to send Paris (XP) ADAT optical to and from =
16 =3D
>channels of=3D20
> Scope ADAT. Using Scope card settings at 'Sync/ADAT'. Now, =
whenever
=3D
>I set it=3D20
> to that it doesn't retain the settings and goes back to =
'Master/SPDIF'
> whether it's plugged into Paris ADAT/SPDIF or not. I've also tried =
=3D
>another
> ADAT machine as the source which had been working while my Mecs =
were =3D
>down.
> That doesn't work either.
>
> What am I missing here?
>
> Thanks,
> Tom
>
>
> =3D20
>
>
> I choose Polesoft Lockspam to fight spam, and you?
> http://www.polesoft.com/refer.html =20
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3D3DContent-Type content=3D3D"text/html; =3D
>charset=3D3Diso-8859-1">
><META content=3D3D"MSHTML 6.00.2800.1400" name=3D3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D3D#ffffff>
><DIV><FONT face=3D3DArial size=3D3D2>Got it. The changes can be made =
=3D
>with in=3D20
>Cubase. Didn't find that</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>the last time through this. I =
had =3D
>been going=3D20
>to Scope to change settings.</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>Anyway with some switching and =
three =3D
>reboots=3D20
></FONT><FONT face=3D3DArial size=3D3D2>we are back on =
track.</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>No clicks or pops and all =
ins/outs are=3D20
>working.</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
><DIV><FONT face=3D3DArial size=3D3D2>Thanks for making me =3D
>think.</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>Tom</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
><BLOCKQUOTE dir=3D3Dltr=3D20
>style=3D3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
=3D
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Tom Bruhl" <<A=3D20
> href=3D3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> =
wrote =3D
>in message=3D20
> <A =
href=3D3D"news:474f20bb$1@linux">news:474f20bb$1@linux</A>...</DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>Hi guys,</FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>I finally have Paris back up =
and =3D
>running with=3D20
> Mecs and all.</FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>Now Cubase SX 2.1 doesn't like =
=3D
>running because of=3D20
> clocking issues.</FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>I am using a Scope Pro card. =
=3D
>Cubase will no=3D20
> longer start up</FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>without Scope running! That's =
=3D
>backwards=3D20
> from what was working </FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>in the past. </FONT><FONT =3D
>face=3D3DArial size=3D3D2>Now=3D20
> with both running it's a clickfest along with the </FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>inevitable crash </FONT><FONT =
=3D
>face=3D3DArial=3D20
> size=3D3D2>as the two are fighting for the hardware resources. =3D
></FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>With Scope off Cubase gives =
the white
=3D
>screen of=3D20
> death at start up looking for clock.</FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>With Scope off I used to send =
=3D
></FONT><FONT=3D20
> face=3D3DArial size=3D3D2>Paris (XP) ADAT optical to and from 16 =
channels
=3D
>of=3D20
> </FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>Scope ADAT. </FONT><FONT =3D
>face=3D3DArial=3D20
> size=3D3D2>Using Scope card =3D
>settings at 'Sync/ADAT'. Now,=3D20
> whenever I set it </FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>to that it doesn't retain the =
=3D
>settings and goes=3D20
> back to 'Master/SPDIF'</FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>whether it's plugged into =
Paris =3D
>ADAT/SPDIF or=3D20
> not. I've also tried another</FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>ADAT machine as the source =
which had
=3D
>been working=3D20
> while my Mecs were down.</FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>That doesn't work =3D
>either.</FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>What am I missing =
here?</FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>Thanks,</FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>Tom</FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> <DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> <DIV><FONT face=3D3DArial size=3D3D2> </FONT> </DIV>
> <DIV><FONT size=3D3D2><BR><BR>I choose Polesoft Lockspam to fight =
spam,
=3D
>and=3D20
> you?<BR><A=3D20
> =3D
=
>href=3D3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/re=
fer=3D
>.html</A> </FONT></DIV></BLOCKQUOTE></BODY></HTML>
>
>

------=_NextPart_000_00C1_01C832D1.20639550
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Hey Dimitrios,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Really?&nbsp; I've been very lucky just =
leaving=20
Scope closed once the settings</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>are correct.&nbsp; I had been making =
those changes=20
in Scope but they weren't</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>staying as I left them even though I =
saved them to=20
a Scope Project.&nbsp; They'd switch</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>right back to unwanted settings and =
Cubase wouldn't=20
start right.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Of course I'm not using&nbsp;Scope much =
yet.&nbsp;=20
Just for it's hardware</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>and softsynths so far in XTC =
mode.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>I got things working when editing the =
same=20
paramenters&nbsp;for Scope clock, sync,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>sample rate </FONT><FONT face=3DArial =
size=3D2>inside=20
</FONT><FONT face=3DArial size=3D2>of Cubase.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>I seem to be ok again.&nbsp; I have a =
bunch of=20
mixes that need to be finished before</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I really implement some of your great =
ideas.&nbsp;=20
The auto latency comp for Paris</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>is first on the list!!!&nbsp; Is that =
working for=20
you?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Cheers,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Dimitrios" &lt;<A=20
href=3D"mailto:musurgio@otenet.gr">musurgio@otenet.gr</A>&gt; wrote in =
message=20
<A =
href=3D"news:474f5ea7$1@linux">news:474f5ea7$1@linux</A>...</DIV><BR>Dear=
=20
Tom,<BR>Please do not forget always start first scope and then Cubase =
!<BR>If=20
you close first scope then you will have a problem and only a =
restart<BR>of=20
computer can bring things up.<BR>So when closing, close first Cubase =
and then=20
Scope.<BR>If you wanna cahnge settings, like master/slave, 44.1-48khz, =
ect,=20
FIRST cloae<BR>Cubase , make settings from within scope envirement and =
then=20
open Cubase,<BR>Regards,<BR>Dimitrios<BR><BR>"Tom Bruhl" &lt;<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>&gt;=20
wrote:<BR>&gt;<BR>&gt;<BR>&gt;Got it.&nbsp; The changes can be made =
with in=20
Cubase.&nbsp; Didn't find that<BR>&gt;the last time through =
this.&nbsp; I had=20
been going to Scope to change =3D<BR>&gt;settings.<BR>&gt;Anyway with =
some=20
switching and three reboots we are back on track.<BR>&gt;No clicks or =
pops and=20
all ins/outs are working.<BR>&gt;<BR>&gt;Thanks for making me=20
think.<BR>&gt;Tom<BR>&gt;<BR>&gt;&nbsp; "Tom Bruhl" &lt;<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>&gt; wrote =
in message=20
=3D<BR>&gt;news:474f20bb$1@linux...<BR>&gt;&nbsp; Hi =
guys,<BR>&gt;&nbsp; I=20
finally have Paris back up and running with Mecs and =
all.<BR>&gt;&nbsp; Now=20
Cubase SX 2.1 doesn't like running because of clocking =
issues.<BR>&gt;&nbsp; I=20
am using a Scope Pro card.&nbsp; Cubase will no longer start =
up<BR>&gt;&nbsp;=20
without Scope running!&nbsp; That's backwards from what was=20
working=3D20<BR>&gt;&nbsp; in the past. Now with both running it's a =
clickfest=20
along with the=3D20<BR>&gt;&nbsp; inevitable crash as the two are =
fighting for=20
the hardware resources. =3D20<BR>&gt;&nbsp; With Scope off Cubase =
gives the=20
white screen of death at start up =3D<BR>&gt;looking for=20
clock.<BR>&gt;<BR>&gt;&nbsp; With Scope off I used to send Paris (XP) =
ADAT=20
optical to and from 16 =3D<BR>&gt;channels of=3D20<BR>&gt;&nbsp; Scope =
ADAT.&nbsp;=20
Using Scope card settings at 'Sync/ADAT'.&nbsp; Now, =
whenever<BR>=3D<BR>&gt;I=20
set it=3D20<BR>&gt;&nbsp; to that it doesn't retain the settings and =
goes back=20
to 'Master/SPDIF'<BR>&gt;&nbsp; whether it's plugged into Paris =
ADAT/SPDIF or=20
not.&nbsp; I've also tried =3D<BR>&gt;another<BR>&gt;&nbsp; ADAT =
machine as the=20
source which had been working while my Mecs were =
=3D<BR>&gt;down.<BR>&gt;&nbsp;=20
That doesn't work either.<BR>&gt;<BR>&gt;&nbsp; What am I missing=20
here?<BR>&gt;<BR>&gt;&nbsp; Thanks,<BR>&gt;&nbsp;=20
Tom<BR>&gt;<BR>&gt;<BR>&gt;&nbsp;&nbsp;&nbsp;=20
=3D20<BR>&gt;<BR>&gt;<BR>&gt;&nbsp; I choose Polesoft Lockspam to =
fight spam,=20
and you?<BR>&gt;&nbsp; <A=20
=
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A>&nbsp;&nbsp;=20
<BR>&gt;<BR>&gt;&lt;!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0=20
Transitional//EN"&gt;<BR>&gt;&lt;HTML&gt;&lt;HEAD&gt; <BR>&gt;&lt;META=20
http-equiv=3D3DContent-Type content=3D3D"text/html;=20
=3D<BR>&gt;charset=3D3Diso-8859-1"&gt;<BR>&gt;&lt;META =
content=3D3D"MSHTML=20
6.00.2800.1400"=20
=
name=3D3DGENERATOR&gt;<BR>&gt;&lt;STYLE&gt;&lt;/STYLE&gt; <BR>&gt;&lt;/HEA=
D&gt;<BR>&gt;&lt;BODY=20
bgColor=3D3D#ffffff&gt;<BR>&gt;&lt;DIV&gt;&lt;FONT face=3D3DArial =
size=3D3D2&gt;Got=20
it. The changes can be made =3D<BR>&gt;with in=3D20<BR>&gt;Cubase. =
Didn't find=20
that&lt;/FONT&gt;&lt;/DIV&gt;<BR>&gt;&lt;DIV&gt;&lt;FONT =
face=3D3DArial=20
size=3D3D2&gt;the last time through this. I had =3D<BR>&gt;been =
going=3D20<BR>&gt;to=20
Scope to change =
settings.&lt;/FONT&gt;&lt;/DIV&gt;<BR>&gt;&lt;DIV&gt;&lt;FONT=20
face=3D3DArial size=3D3D2&gt;Anyway with some switching and three=20
=3D<BR>&gt;reboots=3D20<BR>&gt;&lt;/FONT&gt;&lt;FONT face=3D3DArial =
size=3D3D2&gt;we=20
are back on track.&lt;/FONT&gt;&lt;/DIV&gt;<BR>&gt;&lt;DIV&gt;&lt;FONT =

face=3D3DArial size=3D3D2&gt;No clicks or pops and all ins/outs=20
=
are=3D20<BR>&gt;working.&lt;/FONT&gt;&lt;/DIV&gt; <BR>&gt;&lt;DIV&gt;&lt;F=
ONT=20
face=3D3DArial size=3D3D2&gt;&lt;/FONT&gt; =
&lt;/DIV&gt;<BR>&gt;&lt;DIV&gt;&lt;FONT=20
face=3D3DArial size=3D3D2&gt;Thanks for making me=20
=3D<BR>&gt;think.&lt;/FONT&gt;&lt;/DIV&gt; <BR>&gt;&lt;DIV&gt;&lt;FONT=20
face=3D3DArial=20
size=3D3D2&gt;Tom&lt;/FONT&gt;&lt;/DIV&g t; <BR>&gt;&lt;DIV&gt;&lt;FONT=20
face=3D3DArial size=3D3D2&gt;&lt;/FONT&gt; =
&lt;/DIV&gt;<BR>&gt;&lt;BLOCKQUOTE=20
dir=3D3Dltr=3D20<BR>&gt;style=3D3D"PADDING-RIGHT: 0px; PADDING-LEFT: =
5px;=20
MARGIN-LEFT: 5px; =3D<BR>&gt;BORDER-LEFT: #000000 2px solid; =
MARGIN-RIGHT:=20
0px"&gt;<BR>&gt;&nbsp; &lt;DIV&gt;"Tom Bruhl" =
&lt;&lt;A=3D20<BR>&gt;&nbsp;=20
href=3D3D"<A=20
=
href=3D'mailto:arpegio@comcast.net">arpegio@comcast.net</A'>mailto:arpegi=
o@comcast.net"&gt;arpegio@comcast.net&lt;/A</A>&gt;&gt;=20
wrote =3D<BR>&gt;in message=3D20<BR>&gt;&nbsp; &lt;A href=3D3D"<A=20
=
href=3D'news:474f20bb$1@linux">news:474f20bb$1@linux</A>...</DIV'>news:47=
4f20bb$1@linux"&gt;news:474f20bb$1@linux&lt;/A&gt;...&lt;/DIV</A>&gt;<BR>=
&gt;&nbsp;=20
&lt;DIV&gt;&lt;FONT face=3D3DArial size=3D3D2&gt;Hi=20
guys,&lt;/FONT&gt;&lt;/DIV&gt;<BR>&gt;&nbsp; &lt;DIV&gt;&lt;FONT =
face=3D3DArial=20
size=3D3D2&gt;I finally have Paris back up and =3D<BR>&gt;running=20
with=3D20<BR>&gt;&nbsp; Mecs and =
all.&lt;/FONT&gt;&lt;/DIV&gt;<BR>&gt;&nbsp;=20
&lt;DIV&gt;&lt;FONT face=3D3DArial size=3D3D2&gt;Now Cubase SX 2.1 =
doesn't like=20
=3D<BR>&gt;running because of=3D20<BR>&gt;&nbsp; clocking=20
issues.&lt;/FONT&gt;&lt;/DIV&gt;<BR>&gt;&nbsp; &lt;DIV&gt;&lt;FONT=20
face=3D3DArial size=3D3D2&gt;I am using a Scope Pro card. =
=3D<BR>&gt;Cubase will=20
no=3D20<BR>&gt;&nbsp; longer start =
up&lt;/FONT&gt;&lt;/DIV&gt;<BR>&gt;&nbsp;=20
&lt;DIV&gt;&lt;FONT face=3D3DArial size=3D3D2&gt;without Scope =
running! That's=20
=3D<BR>&gt;backwards=3D20<BR>&gt;&nbsp; from what was working=20
&lt;/FONT&gt;&lt;/DIV&gt;<BR>&gt;&nbsp; &lt;DIV&gt;&lt;FONT =
face=3D3DArial=20
size=3D3D2&gt;in the past. &lt;/FONT&gt;&lt;FONT =
=3D<BR>&gt;face=3D3DArial=20
size=3D3D2&gt;Now=3D20<BR>&gt;&nbsp; with both running it's a =
clickfest along with=20
the &lt;/FONT&gt;&lt;/DIV&gt;<BR>&gt;&nbsp; &lt;DIV&gt;&lt;FONT =
face=3D3DArial=20
size=3D3D2&gt;inevitable crash &lt;/FONT&gt;&lt;FONT=20
=3D<BR>&gt;face=3D3DArial=3D20<BR>&gt;&nbsp; size=3D3D2&gt;as the two =
are fighting for=20
the hardware resources. =
=3D<BR>&gt;&lt;/FONT&gt;&lt;/DIV&gt;<BR >&gt;&nbsp;=20
&lt;DIV&gt;&lt;FONT face=3D3DArial size=3D3D2&gt;With Scope off Cubase =
gives the=20
white<BR>=3D<BR>&gt;screen of=3D20<BR>&gt;&nbsp; death at start up =
looking for=20
clock.&lt;/FONT&gt;&lt;/DIV&gt;<BR>&gt;&nbsp; &lt;DIV&gt;&lt;FONT =
face=3D3DArial=20
size=3D3D2&gt;&lt;/FONT&gt; &lt;/DIV&gt;<BR>&gt;&nbsp; =
&lt;DIV&gt;&lt;FONT=20
face=3D3DArial size=3D3D2&gt;With Scope off I used to send=20
=3D<BR>&gt;&lt;/FONT&gt;&lt;FONT=3D20<BR>&gt;&nbsp; face=3D3DArial =
size=3D3D2&gt;Paris=20
(XP) ADAT optical to and from 16 =
channels<BR>=3D<BR>&gt;of=3D20<BR>&gt;&nbsp;=20
&lt;/FONT&gt;&lt;/DIV&gt;<BR>&gt;&nbsp; &lt;DIV&gt;&lt;FONT =
face=3D3DArial=20
size=3D3D2&gt;Scope ADAT. &lt;/FONT&gt;&lt;FONT=20
=3D<BR>&gt;face=3D3DArial=3D20<BR>&gt;&nbsp; size=3D3D2&gt;Using Scope =
card=20
=3D<BR>&gt;settings at 'Sync/ADAT'. Now,=3D20<BR>&gt;&nbsp; whenever I =
set it=20
&lt;/FONT&gt;&lt;/DIV&gt;<BR>&gt;&nbsp; &lt;DIV&gt;&lt;FONT =
face=3D3DArial=20
size=3D3D2&gt;to that it doesn't retain the =3D<BR>&gt;settings and=20
goes=3D20<BR>&gt;&nbsp; back to=20
'Master/SPDIF'&lt;/FONT&gt;&lt;/DIV&gt;<BR>&gt;&nbsp; =
&lt;DIV&gt;&lt;FONT=20
face=3D3DArial size=3D3D2&gt;whether it's plugged into Paris =
=3D<BR>&gt;ADAT/SPDIF=20
or=3D20<BR>&gt;&nbsp; not. I've also tried=20
another&lt;/FONT&gt;&lt;/DIV&gt;<BR>&gt;&nbsp; &lt;DIV&gt;&lt;FONT=20
face=3D3DArial size=3D3D2&gt;ADAT machine as the source which =
had<BR>=3D<BR>&gt;been=20
working=3D20<BR>&gt;&nbsp; while my Mecs were=20
down.&lt;/FONT&gt;&lt;/DIV&gt;<BR>&gt;&nbsp; &lt;DIV&gt;&lt;FONT =
face=3D3DArial=20
size=3D3D2&gt;That doesn't work=20
=3D<BR>&gt;either.&lt;/FONT&gt;&lt;/DIV&gt; <BR>&gt;&nbsp; =
&lt;DIV&gt;&lt;FONT=20
face=3D3DArial size=3D3D2&gt;&lt;/FONT&gt; &lt;/DIV&gt;<BR>&gt;&nbsp;=20
&lt;DIV&gt;&lt;FONT face=3D3DArial size=3D3D2&gt;What am I missing=20
here?&lt;/FONT&gt;&lt;/DIV&gt;<BR>&gt;&nbsp; &lt;DIV&gt;&lt;FONT =
face=3D3DArial=20
size=3D3D2&gt;&lt;/FONT&gt; &lt;/DIV&gt;<BR>&gt;&nbsp; =
&lt;DIV&gt;&lt;FONT=20
face=3D3DArial =
size=3D3D2&gt;Thanks,&lt;/FONT&gt;&lt;/DIV&a mp;gt; <BR>&gt;&nbsp;=20
&lt;DIV&gt;&lt;FONT face=3D3DArial=20
size=3D3D2&gt;Tom&lt;/FONT&gt;&lt;/DIV&g t; <BR>&gt;&nbsp; =
&lt;DIV&gt;&lt;FONT=20
face=3D3DArial size=3D3D2&gt;&lt;/FONT&gt; &lt;/DIV&gt;<BR>&gt;&nbsp;=20
&lt;DIV&gt;&lt;FONT face=3D3DArial size=3D3D2&gt;&lt;/FONT&gt;=20
&lt;/DIV&gt;<BR>&gt;&nbsp; &lt;DIV&gt;&lt;FONT face=3D3DArial =
size=3D3D2&gt;=20
&lt;/FONT&gt; &lt;/DIV&gt;<BR>&gt;&nbsp; &lt;DIV&gt;&lt;FONT=20
size=3D3D2&gt;&lt;BR&gt;&lt;BR&gt;I choose Polesoft Lockspam to fight=20
spam,<BR>=3D<BR>&gt;and=3D20<BR>&gt;&nbsp; =
you?&lt;BR&gt;&lt;A=3D20<BR>&gt;&nbsp;=20
=3D<BR>&gt;href=3D3D"<A=20
=
href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
'>http://www.polesoft.com/refer.html"&gt;http://www.polesoft.com/refer</A=
>=3D<BR>&gt;.html&lt;/A&gt;=20
=
&lt;/FONT&gt;&lt;/DIV&gt;&lt;/BLOCKQUOTE &gt;&lt;/BODY&gt;&lt;/HTML&gt; <BR=
>&gt;<BR>&gt;<BR></BLOCKQUOTE></BODY></HTML>

------=_NextPart_000_00C1_01C832D1.20639550--
Previous Topic: portland, oregon - drummer looking for work
Next Topic: new plugins
Goto Forum:
  


Current Time: Wed Dec 25 06:40:10 PST 2024

Total time taken to generate the page: 0.00785 seconds