|
|
| Re: ADAT routing [message #103996 is a reply to message #103995] |
Mon, 24 August 2009 04:41   |
mani1147
Messages: 130
Registered: May 2009
Location: NB Canada
|
Senior Member |
|
|
Hi Amuse, yes it is possible, I do it all the time tracking into Paris. I send 8 tracks out of box#1 via CubaseSX/Pulsar adat out into box#2 running Paris/MEC/Adat. Playback in Cubase is controlled by Paris via midi clock using midioverLan (not the best, but it works OK for printing VSTIs). Configure the audio routing in both boxs patchbays, set Pulsar clock to slave and everything works fine.
Good Luck
Rob
[Updated on: Mon, 24 August 2009 04:45] Report message to a moderator |
|
|
|
|
|
|
|
| Re: ADAT routing [message #104001 is a reply to message #104000] |
Mon, 24 August 2009 09:03 |
|
|
Use the Brian Tankersley routing trick, which permits you to leave your ADAT tracks in an "always audible" mode, completely independent of your record or monitor status. You can leave them running sync'd, "print" them to the track whenever you like by putting the track into record enable, or mute them by muting the "External" input.
| Quote: | Brian's great tip can minimize one use of a patchbay by eliminating one annoyance involved in patching equipment to PARIS inputs - "monitoring patched equipment without needing to be in 'record enable'"
Live Monitor and Record at the Same Time:
- Set all the *TOP* EDS inserts on your Paris ppj template to
External. Then put all of the individual External inserts in Bypass. You
should save the ppj that way. This assumes you don't use 4 EDS inserts
at once.
- Whatever your Input source is to a given channel of the Paris
Mixer, in the Patchbay, patch it to both the Mixer and also to the
Insert Return (top row) of the Insert Block. So any Input patch goes to
the both the Mixer in and the Insert return of the same channel. i.e.,
MEC Input 1 goes to Mixer Input 1 *and* Insert 1 Return (top row).
- You (unfortunately) must complete the Insert loop by connecting
each Insert Send (bottom row) to another point. If you don't use
external FX returns, you could just patch all 16 Insert Sends to the FX
Returns (top row). Or use some of the MEC Master patch points. Or some
other combo that works for you.
- Save this as your default ppj [and/or as a Patchbay setup] and you're
good.
When you want Live input without Record Enable, just pop on the
External EDS insert on any channel. You'll get the input, complete with
any other EDS inserts, EQ, FX sends....the whole enchilada just like you
were in Record Ready and Always Monitor Input. If you want to hear
what's already been recorded on that channel as is normal for Paris,
just bypass the External EDS insert.
Regards,
Brian T
|
"... being bitter is like swallowing poison and waiting for the other guy to die..." - anon
|
|
|
|
|
|
| Re: ADAT routing [message #104003 is a reply to message #104002] |
Tue, 25 August 2009 00:04 |
|
|
I don't have the "Sync" light lit but the "Active" and "Optical Lock" lights are both lit. For optical Lock to be lit, I believe you have to be connected bi-directionally, ie both Fireface ADAT out to PARIS ADAT In and vice versa.
Check your ADAT cables are good (cheap at any decent-sized computer place nowadays), make sure "ins" are patched to "outs", make certain both machines are set to the same sample rate (try 48k on both for simplicity), and double check that both machines know which is supposed to be the "master" and which the "slave".
"... being bitter is like swallowing poison and waiting for the other guy to die..." - anon
|
|
|
|
|
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
