Home » The PARIS Forums » PARIS: Main » Paris running on xp mother board recomendations
| Paris running on xp mother board recomendations [message #73181] |
Thu, 28 September 2006 08:08  |
Slavii
Messages: 17
Registered: September 2006
|
Junior Member |
|
|
I am strongly considering building myself a new box and making the switch
from 98 to xp. Is there a list of moterboards (or any other hardware) that
works best in running paris on XP. I will only use this computer to run
Paris. And if I have a system with 2 eds cards, one mec, one c16, is it
worth it for me to switch to XP ?
I rarely have projects with more than 32 tracks.
Thanks,
Steve L.
|
|
|
|
| Re: Paris running on xp mother board recomendations [message #73184 is a reply to message #73181] |
Thu, 28 September 2006 08:42  |
Kim W
Messages: 165
Registered: July 2006
|
Senior Member |
|
|
A bit hard to find these days, and a bit "old school", but they are still
out there.
Gigabyte K8NS Ultra 939. Works like a charm with XP and 4 EDS cards, and
two dual-head Nvidia VGA's.
I Highly recommend it. No problems with IRQ's etc, just plug in
all cards, and install XP. Easy.
Kim
"Steve L." <slavii@aol.com> wrote:
>
>I am strongly considering building myself a new box and making the switch
>from 98 to xp. Is there a list of moterboards (or any other hardware) that
>works best in running paris on XP. I will only use this computer to run
>Paris. And if I have a system with 2 eds cards, one mec, one c16, is it
>worth it for me to switch to XP ?
> I rarely have projects with more than 32 tracks.
>
>Thanks,
>
>Steve L.
|
|
|
|
| Re: Paris running on xp mother board recomendations [message #73188 is a reply to message #73184] |
Thu, 28 September 2006 09:20 |
animix
Messages: 356
Registered: September 2006
|
Senior Member |
|
|
Really? I've been waiting for you to give this mobo your blessing. Last post
I saw from you about it, the jury was still deliberating. So it's good then?
Thanks,
Deej
"Kim W." <no@way.com> wrote in message news:451bed49$1@linux...
>
> A bit hard to find these days, and a bit "old school", but they are still
> out there.
> Gigabyte K8NS Ultra 939. Works like a charm with XP and 4 EDS cards, and
> two dual-head Nvidia VGA's.
> I Highly recommend it. No problems with IRQ's etc, just plug in
> all cards, and install XP. Easy.
>
> Kim
>
> "Steve L." <slavii@aol.com> wrote:
> >
> >I am strongly considering building myself a new box and making the switch
> >from 98 to xp. Is there a list of moterboards (or any other hardware)
that
> >works best in running paris on XP. I will only use this computer to run
> >Paris. And if I have a system with 2 eds cards, one mec, one c16, is it
> >worth it for me to switch to XP ?
> > I rarely have projects with more than 32 tracks.
> >
> >Thanks,
> >
> >Steve L.
>
|
|
|
|
| Re: Paris running on xp mother board recomendations [message #73190 is a reply to message #73184] |
Thu, 28 September 2006 09:40 |
John [1]
Messages: 2229
Registered: September 2005
|
Senior Member |
|
|
No problems with IRQs? What fun is that? Is 4 the most Paris can go before
a Magma chassis is needed? So how are the IRQs on the Magma again with 8
eds cards? It has one PCI interface card that goes in the host pc and it
uses 2(?) irqs and the chassis shares those two across the 8 cards? How
does that work?
Thanks,
John
"Kim W." <no@way.com> wrote:
>
>A bit hard to find these days, and a bit "old school", but they are still
>out there.
>Gigabyte K8NS Ultra 939. Works like a charm with XP and 4 EDS cards, and
>two dual-head Nvidia VGA's.
>I Highly recommend it. No problems with IRQ's etc, just plug in
>all cards, and install XP. Easy.
>
>Kim
>
>"Steve L." <slavii@aol.com> wrote:
>>
>>I am strongly considering building myself a new box and making the switch
>>from 98 to xp. Is there a list of moterboards (or any other hardware)
that
>>works best in running paris on XP. I will only use this computer to run
>>Paris. And if I have a system with 2 eds cards, one mec, one c16, is it
>>worth it for me to switch to XP ?
>> I rarely have projects with more than 32 tracks.
>>
>>Thanks,
>>
>>Steve L.
>
|
|
|
|
| Re: Paris running on xp mother board recomendations [message #73192 is a reply to message #73188] |
Thu, 28 September 2006 09:54 |
Kim W
Messages: 165
Registered: July 2006
|
Senior Member |
|
|
OH YEAH!
The most stable Paris box I've had.
No need to massage Paris XP into working either. It just
worked with, as I said, all cards in place, and installing XP,
letting it's own IRQ assignment do its stuff.
Only using SP1, though. Haven't needed SP2.
Kim
"DJ" <notachance@net.net> wrote:
>Really? I've been waiting for you to give this mobo your blessing. Last
post
>I saw from you about it, the jury was still deliberating. So it's good then?
>
>Thanks,
>
>Deej
>
>"Kim W." <no@way.com> wrote in message news:451bed49$1@linux...
>>
>> A bit hard to find these days, and a bit "old school", but they are still
>> out there.
>> Gigabyte K8NS Ultra 939. Works like a charm with XP and 4 EDS cards, and
>> two dual-head Nvidia VGA's.
>> I Highly recommend it. No problems with IRQ's etc, just plug in
>> all cards, and install XP. Easy.
>>
>> Kim
>>
>> "Steve L." <slavii@aol.com> wrote:
>> >
>> >I am strongly considering building myself a new box and making the switch
>> >from 98 to xp. Is there a list of moterboards (or any other hardware)
>that
>> >works best in running paris on XP. I will only use this computer to
run
>> >Paris. And if I have a system with 2 eds cards, one mec, one c16, is
it
>> >worth it for me to switch to XP ?
>> > I rarely have projects with more than 32 tracks.
>> >
>> >Thanks,
>> >
>> >Steve L.
>>
>
>
|
|
|
|
| Re: Paris running on xp mother board recomendations [message #73193 is a reply to message #73190] |
Thu, 28 September 2006 09:56 |
Kim W
Messages: 165
Registered: July 2006
|
Senior Member |
|
|
Hi John.
Never used a Magma. I reckon you could probably even get 5 EDS's
working, but I need 4 monitors, so one of the pci slots has a
Nvidia Quadro in it.
Kim
"John" <no@no.com> wrote:
>
>No problems with IRQs? What fun is that? Is 4 the most Paris can go before
>a Magma chassis is needed? So how are the IRQs on the Magma again with
8
>eds cards? It has one PCI interface card that goes in the host pc and it
>uses 2(?) irqs and the chassis shares those two across the 8 cards? How
>does that work?
>
>Thanks,
>John
>
>
>
>
>"Kim W." <no@way.com> wrote:
>>
>>A bit hard to find these days, and a bit "old school", but they are still
>>out there.
>>Gigabyte K8NS Ultra 939. Works like a charm with XP and 4 EDS cards, and
>>two dual-head Nvidia VGA's.
>>I Highly recommend it. No problems with IRQ's etc, just plug in
>>all cards, and install XP. Easy.
>>
>>Kim
>>
>>"Steve L." <slavii@aol.com> wrote:
>>>
>>>I am strongly considering building myself a new box and making the switch
>>>from 98 to xp. Is there a list of moterboards (or any other hardware)
>that
>>>works best in running paris on XP. I will only use this computer to run
>>>Paris. And if I have a system with 2 eds cards, one mec, one c16, is
it
>>>worth it for me to switch to XP ?
>>> I rarely have projects with more than 32 tracks.
>>>
>>>Thanks,
>>>
>>>Steve L.
>>
>
|
|
|
|
| Re: Paris running on xp mother board recomendations [message #73195 is a reply to message #73184] |
Thu, 28 September 2006 10:52 |
Slavii
Messages: 17
Registered: September 2006
|
Junior Member |
|
|
what power supply are you useing ?
"Kim W." <no@way.com> wrote:
>
>A bit hard to find these days, and a bit "old school", but they are still
>out there.
>Gigabyte K8NS Ultra 939. Works like a charm with XP and 4 EDS cards, and
>two dual-head Nvidia VGA's.
>I Highly recommend it. No problems with IRQ's etc, just plug in
>all cards, and install XP. Easy.
>
>Kim
>
>"Steve L." <slavii@aol.com> wrote:
>>
>>I am strongly considering building myself a new box and making the switch
>>from 98 to xp. Is there a list of moterboards (or any other hardware)
that
>>works best in running paris on XP. I will only use this computer to run
>>Paris. And if I have a system with 2 eds cards, one mec, one c16, is it
>>worth it for me to switch to XP ?
>> I rarely have projects with more than 32 tracks.
>>
>>Thanks,
>>
>>Steve L.
>
|
|
|
|
| Re: Paris running on xp mother board recomendations [message #73196 is a reply to message #73193] |
Thu, 28 September 2006 10:55 |
animix
Messages: 356
Registered: September 2006
|
Senior Member |
|
|
Ahhhh.....HA!!! ....sooooo....... you're using 4 monitors as well? I missed
that. What kind of dual heads are you using? GEForce 5500's?
BTW, your foray into wretched exess and componentry sluttage has made me
proud.
;o)
"Kim W" <no@way.com> wrote in message news:451bfec7$1@linux...
>
> Hi John.
> Never used a Magma. I reckon you could probably even get 5 EDS's
> working, but I need 4 monitors, so one of the pci slots has a
> Nvidia Quadro in it.
> Kim
>
> "John" <no@no.com> wrote:
> >
> >No problems with IRQs? What fun is that? Is 4 the most Paris can go
before
> >a Magma chassis is needed? So how are the IRQs on the Magma again with
> 8
> >eds cards? It has one PCI interface card that goes in the host pc and it
> >uses 2(?) irqs and the chassis shares those two across the 8 cards? How
> >does that work?
> >
> >Thanks,
> >John
> >
> >
> >
> >
> >"Kim W." <no@way.com> wrote:
> >>
> >>A bit hard to find these days, and a bit "old school", but they are
still
> >>out there.
> >>Gigabyte K8NS Ultra 939. Works like a charm with XP and 4 EDS cards, and
> >>two dual-head Nvidia VGA's.
> >>I Highly recommend it. No problems with IRQ's etc, just plug in
> >>all cards, and install XP. Easy.
> >>
> >>Kim
> >>
> >>"Steve L." <slavii@aol.com> wrote:
> >>>
> >>>I am strongly considering building myself a new box and making the
switch
> >>>from 98 to xp. Is there a list of moterboards (or any other hardware)
> >that
> >>>works best in running paris on XP. I will only use this computer to
run
> >>>Paris. And if I have a system with 2 eds cards, one mec, one c16, is
> it
> >>>worth it for me to switch to XP ?
> >>> I rarely have projects with more than 32 tracks.
> >>>
> >>>Thanks,
> >>>
> >>>Steve L.
> >>
> >
>
|
|
|
|
| Re: Paris running on xp mother board recomendations [message #73197 is a reply to message #73195] |
Thu, 28 September 2006 10:56 |
animix
Messages: 356
Registered: September 2006
|
Senior Member |
|
|
..........and what CPU are you using?
"Steve L." <slavii@aol.com> wrote in message news:451c0bdf$1@linux...
>
> what power supply are you useing ?
>
> "Kim W." <no@way.com> wrote:
> >
> >A bit hard to find these days, and a bit "old school", but they are still
> >out there.
> >Gigabyte K8NS Ultra 939. Works like a charm with XP and 4 EDS cards, and
> >two dual-head Nvidia VGA's.
> >I Highly recommend it. No problems with IRQ's etc, just plug in
> >all cards, and install XP. Easy.
> >
> >Kim
> >
> >"Steve L." <slavii@aol.com> wrote:
> >>
> >>I am strongly considering building myself a new box and making the
switch
> >>from 98 to xp. Is there a list of moterboards (or any other hardware)
> that
> >>works best in running paris on XP. I will only use this computer to run
> >>Paris. And if I have a system with 2 eds cards, one mec, one c16, is it
> >>worth it for me to switch to XP ?
> >> I rarely have projects with more than 32 tracks.
> >>
> >>Thanks,
> >>
> >>Steve L.
> >
>
|
|
|
|
| Re: Paris running on xp mother board recomendations [message #73198 is a reply to message #73196] |
Thu, 28 September 2006 11:13 |
Kim W
Messages: 165
Registered: July 2006
|
Senior Member |
|
|
Hi, DJ.
They are the original Quadros. (NVS 280 I think..)
Would have to check. Got them some time ago on ebay for next to
nothing. These are/were available in PCI and AGP.
Yes, sluttage is good!
Kim
"DJ" <notachance@net.net> wrote:
>Ahhhh.....HA!!! ....sooooo....... you're using 4 monitors as well? I missed
>that. What kind of dual heads are you using? GEForce 5500's?
> BTW, your foray into wretched exess and componentry sluttage has made me
>proud.
>
>;o)
>
>"Kim W" <no@way.com> wrote in message news:451bfec7$1@linux...
>>
>> Hi John.
>> Never used a Magma. I reckon you could probably even get 5 EDS's
>> working, but I need 4 monitors, so one of the pci slots has a
>> Nvidia Quadro in it.
>> Kim
>>
>> "John" <no@no.com> wrote:
>> >
>> >No problems with IRQs? What fun is that? Is 4 the most Paris can go
>before
>> >a Magma chassis is needed? So how are the IRQs on the Magma again with
>> 8
>> >eds cards? It has one PCI interface card that goes in the host pc and
it
>> >uses 2(?) irqs and the chassis shares those two across the 8 cards?
How
>> >does that work?
>> >
>> >Thanks,
>> >John
>> >
>> >
>> >
>> >
>> >"Kim W." <no@way.com> wrote:
>> >>
>> >>A bit hard to find these days, and a bit "old school", but they are
>still
>> >>out there.
>> >>Gigabyte K8NS Ultra 939. Works like a charm with XP and 4 EDS cards,
and
>> >>two dual-head Nvidia VGA's.
>> >>I Highly recommend it. No problems with IRQ's etc, just plug in
>> >>all cards, and install XP. Easy.
>> >>
>> >>Kim
>> >>
>> >>"Steve L." <slavii@aol.com> wrote:
>> >>>
>> >>>I am strongly considering building myself a new box and making the
>switch
>> >>>from 98 to xp. Is there a list of moterboards (or any other hardware)
>> >that
>> >>>works best in running paris on XP. I will only use this computer to
>run
>> >>>Paris. And if I have a system with 2 eds cards, one mec, one c16,
is
>> it
>> >>>worth it for me to switch to XP ?
>> >>> I rarely have projects with more than 32 tracks.
>> >>>
>> >>>Thanks,
>> >>>
>> >>>Steve L.
>> >>
>> >
>>
>
>
|
|
|
|
| Re: Paris running on xp mother board recomendations [message #73199 is a reply to message #73195] |
Thu, 28 September 2006 11:17 |
Kim W
Messages: 165
Registered: July 2006
|
Senior Member |
|
|
Steve.
An Antec true-power 350 watter. I pulled it from an Antec Sonata
case that I bought for Paris, but the damn box wouldn't accomodate the full
length EDS cards.
"Steve L." <slavii@aol.com> wrote:
>
>what power supply are you useing ?
>
>"Kim W." <no@way.com> wrote:
>>
>>A bit hard to find these days, and a bit "old school", but they are still
>>out there.
>>Gigabyte K8NS Ultra 939. Works like a charm with XP and 4 EDS cards, and
>>two dual-head Nvidia VGA's.
>>I Highly recommend it. No problems with IRQ's etc, just plug in
>>all cards, and install XP. Easy.
>>
>>Kim
>>
>>"Steve L." <slavii@aol.com> wrote:
>>>
>>>I am strongly considering building myself a new box and making the switch
>>>from 98 to xp. Is there a list of moterboards (or any other hardware)
>that
>>>works best in running paris on XP. I will only use this computer to run
>>>Paris. And if I have a system with 2 eds cards, one mec, one c16, is
it
>>>worth it for me to switch to XP ?
>>> I rarely have projects with more than 32 tracks.
>>>
>>>Thanks,
>>>
>>>Steve L.
>>
>
|
|
|
|
| Re: Paris running on xp mother board recomendations [message #73200 is a reply to message #73198] |
Thu, 28 September 2006 11:17 |
animix
Messages: 356
Registered: September 2006
|
Senior Member |
|
|
Kim,
Could you get me the model #'s of those video cards when you get a chance?
thanks, oh moderating one
;o)
"Kim W" <no@way.com> wrote in message news:451c10ca$1@linux...
>
> Hi, DJ.
> They are the original Quadros. (NVS 280 I think..)
> Would have to check. Got them some time ago on ebay for next to
> nothing. These are/were available in PCI and AGP.
> Yes, sluttage is good!
> Kim
>
> "DJ" <notachance@net.net> wrote:
> >Ahhhh.....HA!!! ....sooooo....... you're using 4 monitors as well? I
missed
> >that. What kind of dual heads are you using? GEForce 5500's?
> > BTW, your foray into wretched exess and componentry sluttage has made me
> >proud.
> >
> >;o)
> >
> >"Kim W" <no@way.com> wrote in message news:451bfec7$1@linux...
> >>
> >> Hi John.
> >> Never used a Magma. I reckon you could probably even get 5 EDS's
> >> working, but I need 4 monitors, so one of the pci slots has a
> >> Nvidia Quadro in it.
> >> Kim
> >>
> >> "John" <no@no.com> wrote:
> >> >
> >> >No problems with IRQs? What fun is that? Is 4 the most Paris can go
> >before
> >> >a Magma chassis is needed? So how are the IRQs on the Magma again
with
> >> 8
> >> >eds cards? It has one PCI interface card that goes in the host pc and
> it
> >> >uses 2(?) irqs and the chassis shares those two across the 8 cards?
> How
> >> >does that work?
> >> >
> >> >Thanks,
> >> >John
> >> >
> >> >
> >> >
> >> >
> >> >"Kim W." <no@way.com> wrote:
> >> >>
> >> >>A bit hard to find these days, and a bit "old school", but they are
> >still
> >> >>out there.
> >> >>Gigabyte K8NS Ultra 939. Works like a charm with XP and 4 EDS cards,
> and
> >> >>two dual-head Nvidia VGA's.
> >> >>I Highly recommend it. No problems with IRQ's etc, just plug in
> >> >>all cards, and install XP. Easy.
> >> >>
> >> >>Kim
> >> >>
> >> >>"Steve L." <slavii@aol.com> wrote:
> >> >>>
> >> >>>I am strongly considering building myself a new box and making the
> >switch
> >> >>>from 98 to xp. Is there a list of moterboards (or any other
hardware)
> >> >that
> >> >>>works best in running paris on XP. I will only use this computer to
> >run
> >> >>>Paris. And if I have a system with 2 eds cards, one mec, one c16,
> is
> >> it
> >> >>>worth it for me to switch to XP ?
> >> >>> I rarely have projects with more than 32 tracks.
> >> >>>
> >> >>>Thanks,
> >> >>>
> >> >>>Steve L.
> >> >>
> >> >
> >>
> >
> >
>
|
|
|
|
| Re: Paris running on xp mother board recomendations [message #73201 is a reply to message #73197] |
Thu, 28 September 2006 11:19 |
Kim W
Messages: 165
Registered: July 2006
|
Senior Member |
|
|
3500+
"DJ" <notachance@net.net> wrote:
>.........and what CPU are you using?
>
>"Steve L." <slavii@aol.com> wrote in message news:451c0bdf$1@linux...
>>
>> what power supply are you useing ?
>>
>> "Kim W." <no@way.com> wrote:
>> >
>> >A bit hard to find these days, and a bit "old school", but they are still
>> >out there.
>> >Gigabyte K8NS Ultra 939. Works like a charm with XP and 4 EDS cards,
and
>> >two dual-head Nvidia VGA's.
>> >I Highly recommend it. No problems with IRQ's etc, just plug in
>> >all cards, and install XP. Easy.
>> >
>> >Kim
>> >
>> >"Steve L." <slavii@aol.com> wrote:
>> >>
>> >>I am strongly considering building myself a new box and making the
>switch
>> >>from 98 to xp. Is there a list of moterboards (or any other hardware)
>> that
>> >>works best in running paris on XP. I will only use this computer to
run
>> >>Paris. And if I have a system with 2 eds cards, one mec, one c16, is
it
>> >>worth it for me to switch to XP ?
>> >> I rarely have projects with more than 32 tracks.
>> >>
>> >>Thanks,
>> >>
>> >>Steve L.
>> >
>>
>
>
|
|
|
|
| Re: Paris running on xp mother board recomendations [message #73202 is a reply to message #73200] |
Thu, 28 September 2006 11:30 |
Kim W
Messages: 165
Registered: July 2006
|
Senior Member |
|
|
Lookie Here:
http://cgi.ebay.com/Nvidia-Quadro-NVS-280-AGP-64mb-2x-4x-8x- Dual-Video_W0QQitemZ180032324096QQihZ008QQcategoryZ40161QQrd Z1QQcmdZViewItem
http://cgi.ebay.com/Nvidia-Quadro-NVS-280-AGP-64mb-2x-4x-8x- Dual-Video_W0QQitemZ180032324980QQihZ008QQcategoryZ40161QQrd Z1QQcmdZViewItem
http://cgi.ebay.com/NVIDIA-Quadro-NVS280-AGP-64mb-DDR-SDRAM- Excellent_W0QQitemZ260035231225QQihZ016QQcategoryZ40161QQrdZ 1QQcmdZViewItem
http://cgi.ebay.com/NVIDIA-Quadro-NVS280-AGP-64mb-DDR-SDRAM- Excellent_W0QQitemZ260035231225QQihZ016QQcategoryZ40161QQrdZ 1QQcmdZViewItem
http://cgi.ebay.com/NVIDIA-Quadro-NVS280-AGP-64mb-DDR-SDRAM- Excellent_W0QQitemZ260035231225QQihZ016QQcategoryZ40161QQrdZ 1QQcmdZViewItem
Passive cooling, too. Nice and quiet.
Kim
"DJ" <notachance@net.net> wrote:
>Kim,
>
>Could you get me the model #'s of those video cards when you get a chance?
>
>thanks, oh moderating one
>
>;o)
>
>"Kim W" <no@way.com> wrote in message news:451c10ca$1@linux...
>>
>> Hi, DJ.
>> They are the original Quadros. (NVS 280 I think..)
>> Would have to check. Got them some time ago on ebay for next to
>> nothing. These are/were available in PCI and AGP.
>> Yes, sluttage is good!
>> Kim
>>
>> "DJ" <notachance@net.net> wrote:
>> >Ahhhh.....HA!!! ....sooooo....... you're using 4 monitors as well? I
>missed
>> >that. What kind of dual heads are you using? GEForce 5500's?
>> > BTW, your foray into wretched exess and componentry sluttage has made
me
>> >proud.
>> >
>> >;o)
>> >
>> >"Kim W" <no@way.com> wrote in message news:451bfec7$1@linux...
>> >>
>> >> Hi John.
>> >> Never used a Magma. I reckon you could probably even get 5 EDS's
>> >> working, but I need 4 monitors, so one of the pci slots has a
>> >> Nvidia Quadro in it.
>> >> Kim
>> >>
>> >> "John" <no@no.com> wrote:
>> >> >
>> >> >No problems with IRQs? What fun is that? Is 4 the most Paris can
go
>> >before
>> >> >a Magma chassis is needed? So how are the IRQs on the Magma again
>with
>> >> 8
>> >> >eds cards? It has one PCI interface card that goes in the host pc
and
>> it
>> >> >uses 2(?) irqs and the chassis shares those two across the 8 cards?
>> How
>> >> >does that work?
>> >> >
>> >> >Thanks,
>> >> >John
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >"Kim W." <no@way.com> wrote:
>> >> >>
>> >> >>A bit hard to find these days, and a bit "old school", but they are
>> >still
>> >> >>out there.
>> >> >>Gigabyte K8NS Ultra 939. Works like a charm with XP and 4 EDS cards,
>> and
>> >> >>two dual-head Nvidia VGA's.
>> >> >>I Highly recommend it. No problems with IRQ's etc, just plug in
>> >> >>all cards, and install XP. Easy.
>> >> >>
>> >> >>Kim
>> >> >>
>> >> >>"Steve L." <slavii@aol.com> wrote:
>> >> >>>
>> >> >>>I am strongly considering building myself a new box and making the
>> >switch
>> >> >>>from 98 to xp. Is there a list of moterboards (or any other
>hardware)
>> >> >that
>> >> >>>works best in running paris on XP. I will only use this computer
to
>> >run
>> >> >>>Paris. And if I have a system with 2 eds cards, one mec, one c16,
>> is
>> >> it
>> >> >>>worth it for me to switch to XP ?
>> >> >>> I rarely have projects with more than 32 tracks.
>> >> >>>
>> >> >>>Thanks,
>> >> >>>
>> >> >>>Steve L.
>> >> >>
>> >> >
>> >>
>> >
>> >
>>
>
>
|
|
|
|
| Re: Paris running on xp mother board recomendations [message #73203 is a reply to message #73202] |
Thu, 28 September 2006 11:40 |
Kim W
Messages: 165
Registered: July 2006
|
Senior Member |
|
|
OOPS!
Try these for the PCI.
Guess my copy/paste chops aren't up to it a 4am.
http://cgi.ebay.com/NVIDIA-64MB-PCI-Graphics-Card-Quadro-NVS 280-DDR_W0QQitemZ140032418162QQihZ004QQcategoryZ96877QQrdZ1Q QcmdZViewItem
http://cgi.ebay.com/PNY-NVIDIA-QUADRO-NVS-280-PCI-64MB-VCQ42 80NVS-PCI_W0QQitemZ110038297777QQihZ001QQcategoryZ64481QQrdZ 1QQcmdZViewItem
>Lookie Here:
>
> http://cgi.ebay.com/Nvidia-Quadro-NVS-280-AGP-64mb-2x-4x-8x- Dual-Video_W0QQitemZ180032324096QQihZ008QQcategoryZ40161QQrd Z1QQcmdZViewItem
>
> http://cgi.ebay.com/Nvidia-Quadro-NVS-280-AGP-64mb-2x-4x-8x- Dual-Video_W0QQitemZ180032324980QQihZ008QQcategoryZ40161QQrd Z1QQcmdZViewItem
>
> http://cgi.ebay.com/NVIDIA-Quadro-NVS280-AGP-64mb-DDR-SDRAM- Excellent_W0QQitemZ260035231225QQihZ016QQcategoryZ40161QQrdZ 1QQcmdZViewItem
>
> http://cgi.ebay.com/NVIDIA-Quadro-NVS280-AGP-64mb-DDR-SDRAM- Excellent_W0QQitemZ260035231225QQihZ016QQcategoryZ40161QQrdZ 1QQcmdZViewItem
>
> http://cgi.ebay.com/NVIDIA-Quadro-NVS280-AGP-64mb-DDR-SDRAM- Excellent_W0QQitemZ260035231225QQihZ016QQcategoryZ40161QQrdZ 1QQcmdZViewItem
>
>Passive cooling, too. Nice and quiet.
>
>Kim
>
>"DJ" <notachance@net.net> wrote:
>>Kim,
>>
>>Could you get me the model #'s of those video cards when you get a chance?
>>
>>thanks, oh moderating one
>>
>>;o)
>>
>>"Kim W" <no@way.com> wrote in message news:451c10ca$1@linux...
>>>
>>> Hi, DJ.
>>> They are the original Quadros. (NVS 280 I think..)
>>> Would have to check. Got them some time ago on ebay for next to
>>> nothing. These are/were available in PCI and AGP.
>>> Yes, sluttage is good!
>>> Kim
>>>
>>> "DJ" <notachance@net.net> wrote:
>>> >Ahhhh.....HA!!! ....sooooo....... you're using 4 monitors as well?
I
>>missed
>>> >that. What kind of dual heads are you using? GEForce 5500's?
>>> > BTW, your foray into wretched exess and componentry sluttage has made
>me
>>> >proud.
>>> >
>>> >;o)
>>> >
>>> >"Kim W" <no@way.com> wrote in message news:451bfec7$1@linux...
>>> >>
>>> >> Hi John.
>>> >> Never used a Magma. I reckon you could probably even get 5 EDS's
>>> >> working, but I need 4 monitors, so one of the pci slots has a
>>> >> Nvidia Quadro in it.
>>> >> Kim
>>> >>
>>> >> "John" <no@no.com> wrote:
>>> >> >
>>> >> >No problems with IRQs? What fun is that? Is 4 the most Paris can
>go
>>> >before
>>> >> >a Magma chassis is needed? So how are the IRQs on the Magma again
>>with
>>> >> 8
>>> >> >eds cards? It has one PCI interface card that goes in the host pc
>and
>>> it
>>> >> >uses 2(?) irqs and the chassis shares those two across the 8 cards?
>>> How
>>> >> >does that work?
>>> >> >
>>> >> >Thanks,
>>> >> >John
>>> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >> >"Kim W." <no@way.com> wrote:
>>> >> >>
>>> >> >>A bit hard to find these days, and a bit "old school", but they
are
>>> >still
>>> >> >>out there.
>>> >> >>Gigabyte K8NS Ultra 939. Works like a charm with XP and 4 EDS cards,
>>> and
>>> >> >>two dual-head Nvidia VGA's.
>>> >> >>I Highly recommend it. No problems with IRQ's etc, just plug in
>>> >> >>all cards, and install XP. Easy.
>>> >> >>
>>> >> >>Kim
>>> >> >>
>>> >> >>"Steve L." <slavii@aol.com> wrote:
>>> >> >>>
>>> >> >>>I am strongly considering building myself a new box and making
the
>>> >switch
>>> >> >>>from 98 to xp. Is there a list of moterboards (or any other
>>hardware)
>>> >> >that
>>> >> >>>works best in running paris on XP. I will only use this computer
>to
>>> >run
>>> >> >>>Paris. And if I have a system with 2 eds cards, one mec, one c16,
>>> is
>>> >> it
>>> >> >>>worth it for me to switch to XP ?
>>> >> >>> I rarely have projects with more than 32 tracks.
>>> >> >>>
>>> >> >>>Thanks,
>>> >> >>>
>>> >> >>>Steve L.
>>> >> >>
>>> >> >
>>> >>
>>> >
>>> >
>>>
>>
>>
>
|
|
|
|
| Re: Paris running on xp mother board recomendations [message #73204 is a reply to message #73203] |
Thu, 28 September 2006 11:43 |
Kim W
Messages: 165
Registered: July 2006
|
Senior Member |
|
|
DJ.
Also forgot to mention that Paris doesn't stop playing when
moving windows across screens with these cards.
My pair of Matrox 450's used to. (that may have been a win98
issue though...)
Kim
"Kim W" <no@way.com> wrote:
>
>OOPS!
>Try these for the PCI.
>Guess my copy/paste chops aren't up to it a 4am.
>
> http://cgi.ebay.com/NVIDIA-64MB-PCI-Graphics-Card-Quadro-NVS 280-DDR_W0QQitemZ140032418162QQihZ004QQcategoryZ96877QQrdZ1Q QcmdZViewItem
>
> http://cgi.ebay.com/PNY-NVIDIA-QUADRO-NVS-280-PCI-64MB-VCQ42 80NVS-PCI_W0QQitemZ110038297777QQihZ001QQcategoryZ64481QQrdZ 1QQcmdZViewItem
>
>>Lookie Here:
>>
>> http://cgi.ebay.com/Nvidia-Quadro-NVS-280-AGP-64mb-2x-4x-8x- Dual-Video_W0QQitemZ180032324096QQihZ008QQcategoryZ40161QQrd Z1QQcmdZViewItem
>>
>> http://cgi.ebay.com/Nvidia-Quadro-NVS-280-AGP-64mb-2x-4x-8x- Dual-Video_W0QQitemZ180032324980QQihZ008QQcategoryZ40161QQrd Z1QQcmdZViewItem
>>
>> http://cgi.ebay.com/NVIDIA-Quadro-NVS280-AGP-64mb-DDR-SDRAM- Excellent_W0QQitemZ260035231225QQihZ016QQcategoryZ40161QQrdZ 1QQcmdZViewItem
>>
>> http://cgi.ebay.com/NVIDIA-Quadro-NVS280-AGP-64mb-DDR-SDRAM- Excellent_W0QQitemZ260035231225QQihZ016QQcategoryZ40161QQrdZ 1QQcmdZViewItem
>>
>> http://cgi.ebay.com/NVIDIA-Quadro-NVS280-AGP-64mb-DDR-SDRAM- Excellent_W0QQitemZ260035231225QQihZ016QQcategoryZ40161QQrdZ 1QQcmdZViewItem
>>
>>Passive cooling, too. Nice and quiet.
>>
>>Kim
>>
>>"DJ" <notachance@net.net> wrote:
>>>Kim,
>>>
>>>Could you get me the model #'s of those video cards when you get a chance?
>>>
>>>thanks, oh moderating one
>>>
>>>;o)
>>>
>>>"Kim W" <no@way.com> wrote in message news:451c10ca$1@linux...
>>>>
>>>> Hi, DJ.
>>>> They are the original Quadros. (NVS 280 I think..)
>>>> Would have to check. Got them some time ago on ebay for next to
>>>> nothing. These are/were available in PCI and AGP.
>>>> Yes, sluttage is good!
>>>> Kim
>>>>
>>>> "DJ" <notachance@net.net> wrote:
>>>> >Ahhhh.....HA!!! ....sooooo....... you're using 4 monitors as well?
>I
>>>missed
>>>> >that. What kind of dual heads are you using? GEForce 5500's?
>>>> > BTW, your foray into wretched exess and componentry sluttage has made
>>me
>>>> >proud.
>>>> >
>>>> >;o)
>>>> >
>>>> >"Kim W" <no@way.com> wrote in message news:451bfec7$1@linux...
>>>> >>
>>>> >> Hi John.
>>>> >> Never used a Magma. I reckon you could probably even get 5 EDS's
>>>> >> working, but I need 4 monitors, so one of the pci slots has a
>>>> >> Nvidia Quadro in it.
>>>> >> Kim
>>>> >>
>>>> >> "John" <no@no.com> wrote:
>>>> >> >
>>>> >> >No problems with IRQs? What fun is that? Is 4 the most Paris can
>>go
>>>> >before
>>>> >> >a Magma chassis is needed? So how are the IRQs on the Magma again
>>>with
>>>> >> 8
>>>> >> >eds cards? It has one PCI interface card that goes in the host
pc
>>and
>>>> it
>>>> >> >uses 2(?) irqs and the chassis shares those two across the 8 cards?
>>>> How
>>>> >> >does that work?
>>>> >> >
>>>> >> >Thanks,
>>>> >> >John
>>>> >> >
>>>> >> >
>>>> >> >
>>>> >> >
>>>> >> >"Kim W." <no@way.com> wrote:
>>>> >> >>
>>>> >> >>A bit hard to find these days, and a bit "old school", but they
>are
>>>> >still
>>>> >> >>out there.
>>>> >> >>Gigabyte K8NS Ultra 939. Works like a charm with XP and 4 EDS cards,
>>>> and
>>>> >> >>two dual-head Nvidia VGA's.
>>>> >> >>I Highly recommend it. No problems with IRQ's etc, just plug in
>>>> >> >>all cards, and install XP. Easy.
>>>> >> >>
>>>> >> >>Kim
>>>> >> >>
>>>> >> >>"Steve L." <slavii@aol.com> wrote:
>>>> >> >>>
>>>> >> >>>I am strongly considering building myself a new box and making
>the
>>>> >switch
>>>> >> >>>from 98 to xp. Is there a list of moterboards (or any other
>>>hardware)
>>>> >> >that
>>>> >> >>>works best in running paris on XP. I will only use this computer
>>to
>>>> >run
>>>> >> >>>Paris. And if I have a system with 2 eds cards, one mec, one
c16,
>>>> is
>>>> >> it
>>>> >> >>>worth it for me to switch to XP ?
>>>> >> >>> I rarely have projects with more than 32 tracks.
>>>> >> >>>
>>>> >> >>>Thanks,
>>>> >> >>>
>>>> >> >>>Steve L.
>>>> >> >>
>>>> >> >
>>>> >>
>>>> >
>>>> >
>>>>
>>>
>>>
>>
>
|
|
|
|
| Re: Paris running on xp mother board recomendations [message #73205 is a reply to message #73201] |
Thu, 28 September 2006 11:46 |
animix
Messages: 356
Registered: September 2006
|
Senior Member |
|
|
How much RAM? What brand?
"Kim W." <no@way.com> wrote in message news:451c121f$1@linux...
>
> 3500+
>
> "DJ" <notachance@net.net> wrote:
> >.........and what CPU are you using?
> >
> >"Steve L." <slavii@aol.com> wrote in message news:451c0bdf$1@linux...
> >>
> >> what power supply are you useing ?
> >>
> >> "Kim W." <no@way.com> wrote:
> >> >
> >> >A bit hard to find these days, and a bit "old school", but they are
still
> >> >out there.
> >> >Gigabyte K8NS Ultra 939. Works like a charm with XP and 4 EDS cards,
> and
> >> >two dual-head Nvidia VGA's.
> >> >I Highly recommend it. No problems with IRQ's etc, just plug in
> >> >all cards, and install XP. Easy.
> >> >
> >> >Kim
> >> >
> >> >"Steve L." <slavii@aol.com> wrote:
> >> >>
> >> >>I am strongly considering building myself a new box and making the
> >switch
> >> >>from 98 to xp. Is there a list of moterboards (or any other
hardware)
> >> that
> >> >>works best in running paris on XP. I will only use this computer to
> run
> >> >>Paris. And if I have a system with 2 eds cards, one mec, one c16, is
> it
> >> >>worth it for me to switch to XP ?
> >> >> I rarely have projects with more than 32 tracks.
> >> >>
> >> >>Thanks,
> >> >>
> >> >>Steve L.
> >> >
> >>
> >
> >
>
|
|
|
|
| Re: Paris running on xp mother board recomendations [message #73207 is a reply to message #73205] |
Thu, 28 September 2006 11:54 |
Kim W
Messages: 165
Registered: July 2006
|
Senior Member |
|
|
No-name 768mb. (not running dual-channel).
I think one of them is A-data.
As far as the video cards go, there are heaps on eBay, but
make sure you get the right splitter cables for your needs.
Kim
DJ" <notachance@net.net> wrote:
>How much RAM? What brand?
>
>"Kim W." <no@way.com> wrote in message news:451c121f$1@linux...
>>
>> 3500+
>>
>> "DJ" <notachance@net.net> wrote:
>> >.........and what CPU are you using?
>> >
>> >"Steve L." <slavii@aol.com> wrote in message news:451c0bdf$1@linux...
>> >>
>> >> what power supply are you useing ?
>> >>
>> >> "Kim W." <no@way.com> wrote:
>> >> >
>> >> >A bit hard to find these days, and a bit "old school", but they are
>still
>> >> >out there.
>> >> >Gigabyte K8NS Ultra 939. Works like a charm with XP and 4 EDS cards,
>> and
>> >> >two dual-head Nvidia VGA's.
>> >> >I Highly recommend it. No problems with IRQ's etc, just plug in
>> >> >all cards, and install XP. Easy.
>> >> >
>> >> >Kim
>> >> >
>> >> >"Steve L." <slavii@aol.com> wrote:
>> >> >>
>> >> >>I am strongly considering building myself a new box and making the
>> >switch
>> >> >>from 98 to xp. Is there a list of moterboards (or any other
>hardware)
>> >> that
>> >> >>works best in running paris on XP. I will only use this computer
to
>> run
>> >> >>Paris. And if I have a system with 2 eds cards, one mec, one c16,
is
>> it
>> >> >>worth it for me to switch to XP ?
>> >> >> I rarely have projects with more than 32 tracks.
>> >> >>
>> >> >>Thanks,
>> >> >>
>> >> >>Steve L.
>> >> >
>> >>
>> >
>> >
>>
>
>
|
|
|
|
| Re: Paris running on xp mother board recomendations [message #73208 is a reply to message #73207] |
Thu, 28 September 2006 12:11 |
Tony Benson
Messages: 453
Registered: June 2006
|
Senior Member |
|
|
Hey Kim,
Maybe if you get time, you could just post the whole config on this computer
that works so well with PARIS? I'm a Mac guy, but have been toying with
building a PC for PARIS. Anyway, being a stupid Mac guy, I need all the
details you can spare. It might also save you from having to give everyone
your config, one post at a time. ;>)
Tony
"Kim W." <no@way.com> wrote in message news:451c1a58$1@linux...
>
> No-name 768mb. (not running dual-channel).
> I think one of them is A-data.
> As far as the video cards go, there are heaps on eBay, but
> make sure you get the right splitter cables for your needs.
> Kim
>
> DJ" <notachance@net.net> wrote:
>>How much RAM? What brand?
>>
>>"Kim W." <no@way.com> wrote in message news:451c121f$1@linux...
>>>
>>> 3500+
>>>
>>> "DJ" <notachance@net.net> wrote:
>>> >.........and what CPU are you using?
>>> >
>>> >"Steve L." <slavii@aol.com> wrote in message news:451c0bdf$1@linux...
>>> >>
>>> >> what power supply are you useing ?
>>> >>
>>> >> "Kim W." <no@way.com> wrote:
>>> >> >
>>> >> >A bit hard to find these days, and a bit "old school", but they are
>>still
>>> >> >out there.
>>> >> >Gigabyte K8NS Ultra 939. Works like a charm with XP and 4 EDS cards,
>>> and
>>> >> >two dual-head Nvidia VGA's.
>>> >> >I Highly recommend it. No problems with IRQ's etc, just plug in
>>> >> >all cards, and install XP. Easy.
>>> >> >
>>> >> >Kim
>>> >> >
>>> >> >"Steve L." <slavii@aol.com> wrote:
>>> >> >>
>>> >> >>I am strongly considering building myself a new box and making the
>>> >switch
>>> >> >>from 98 to xp. Is there a list of moterboards (or any other
>>hardware)
>>> >> that
>>> >> >>works best in running paris on XP. I will only use this computer
> to
>>> run
>>> >> >>Paris. And if I have a system with 2 eds cards, one mec, one c16,
> is
>>> it
>>> >> >>worth it for me to switch to XP ?
>>> >> >> I rarely have projects with more than 32 tracks.
>>> >> >>
>>> >> >>Thanks,
>>> >> >>
>>> >> >>Steve L.
>>> >> >
>>> >>
>>> >
>>> >
>>>
>>
>>
>
|
|
|
|
| Re: Paris running on xp mother board recomendations [message #73209 is a reply to message #73208] |
Thu, 28 September 2006 12:09 |
Kim W
Messages: 165
Registered: July 2006
|
Senior Member |
|
|
Sure, Tony.
Maybe tomorrow.
Gotta get some shuteye now.
Kim
"Tony Benson" <tony@standinghampton.com> wrote:
>Hey Kim,
>
>Maybe if you get time, you could just post the whole config on this computer
>that works so well with PARIS? I'm a Mac guy, but have been toying with
>building a PC for PARIS. Anyway, being a stupid Mac guy, I need all the
>details you can spare. It might also save you from having to give everyone
>your config, one post at a time. ;>)
>
>Tony
>
>
>"Kim W." <no@way.com> wrote in message news:451c1a58$1@linux...
>>
>> No-name 768mb. (not running dual-channel).
>> I think one of them is A-data.
>> As far as the video cards go, there are heaps on eBay, but
>> make sure you get the right splitter cables for your needs.
>> Kim
>>
>> DJ" <notachance@net.net> wrote:
>>>How much RAM? What brand?
>>>
>>>"Kim W." <no@way.com> wrote in message news:451c121f$1@linux...
>>>>
>>>> 3500+
>>>>
>>>> "DJ" <notachance@net.net> wrote:
>>>> >.........and what CPU are you using?
>>>> >
>>>> >"Steve L." <slavii@aol.com> wrote in message news:451c0bdf$1@linux...
>>>> >>
>>>> >> what power supply are you useing ?
>>>> >>
>>>> >> "Kim W." <no@way.com> wrote:
>>>> >> >
>>>> >> >A bit hard to find these days, and a bit "old school", but they
are
>>>still
>>>> >> >out there.
>>>> >> >Gigabyte K8NS Ultra 939. Works like a charm with XP and 4 EDS cards,
>>>> and
>>>> >> >two dual-head Nvidia VGA's.
>>>> >> >I Highly recommend it. No problems with IRQ's etc, just plug in
>>>> >> >all cards, and install XP. Easy.
>>>> >> >
>>>> >> >Kim
>>>> >> >
>>>> >> >"Steve L." <slavii@aol.com> wrote:
>>>> >> >>
>>>> >> >>I am strongly considering building myself a new box and making
the
>>>> >switch
>>>> >> >>from 98 to xp. Is there a list of moterboards (or any other
>>>hardware)
>>>> >> that
>>>> >> >>works best in running paris on XP. I will only use this computer
>> to
>>>> run
>>>> >> >>Paris. And if I have a system with 2 eds cards, one mec, one c16,
>> is
>>>> it
>>>> >> >>worth it for me to switch to XP ?
>>>> >> >> I rarely have projects with more than 32 tracks.
>>>> >> >>
>>>> >> >>Thanks,
>>>> >> >>
>>>> >> >>Steve L.
>>>> >> >
>>>> >>
>>>> >
>>>> >
>>>>
>>>
>>>
>>
>
>
|
|
|
|
| Re: Paris running on xp mother board recomendations [message #73211 is a reply to message #73196] |
Thu, 28 September 2006 12:22 |
John [1]
Messages: 2229
Registered: September 2005
|
Senior Member |
|
|
I salute you both. Nice job sluts !
DJ wrote:
> Ahhhh.....HA!!! ....sooooo....... you're using 4 monitors as well? I missed
> that. What kind of dual heads are you using? GEForce 5500's?
> BTW, your foray into wretched exess and componentry sluttage has made me
> proud.
>
> ;o)
>
> "Kim W" <no@way.com> wrote in message news:451bfec7$1@linux...
>> Hi John.
>> Never used a Magma. I reckon you could probably even get 5 EDS's
>> working, but I need 4 monitors, so one of the pci slots has a
>> Nvidia Quadro in it.
>> Kim
>>
>> "John" <no@no.com> wrote:
>>> No problems with IRQs? What fun is that? Is 4 the most Paris can go
> before
>>> a Magma chassis is needed? So how are the IRQs on the Magma again with
>> 8
>>> eds cards? It has one PCI interface card that goes in the host pc and it
>>> uses 2(?) irqs and the chassis shares those two across the 8 cards? How
>>> does that work?
>>>
>>> Thanks,
>>> John
>>>
>>>
>>>
>>>
>>> "Kim W." <no@way.com> wrote:
>>>> A bit hard to find these days, and a bit "old school", but they are
> still
>>>> out there.
>>>> Gigabyte K8NS Ultra 939. Works like a charm with XP and 4 EDS cards, and
>>>> two dual-head Nvidia VGA's.
>>>> I Highly recommend it. No problems with IRQ's etc, just plug in
>>>> all cards, and install XP. Easy.
>>>>
>>>> Kim
>>>>
>>>> "Steve L." <slavii@aol.com> wrote:
>>>>> I am strongly considering building myself a new box and making the
> switch
>>>> >from 98 to xp. Is there a list of moterboards (or any other hardware)
>>> that
>>>>> works best in running paris on XP. I will only use this computer to
> run
>>>>> Paris. And if I have a system with 2 eds cards, one mec, one c16, is
>> it
>>>>> worth it for me to switch to XP ?
>>>>> I rarely have projects with more than 32 tracks.
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Steve L.
>
>
|
|
|
|
| Re: Paris running on xp mother board recomendations [message #73212 is a reply to message #73208] |
Thu, 28 September 2006 12:27 |
John [1]
Messages: 2229
Registered: September 2005
|
Senior Member |
|
|
Paris only works well with pieces. No one has ever built a whole
computer that works well with Paris. hehe, couldn't resist.
John
Tony Benson wrote:
> Hey Kim,
>
> Maybe if you get time, you could just post the whole config on this computer
> that works so well with PARIS? I'm a Mac guy, but have been toying with
> building a PC for PARIS. Anyway, being a stupid Mac guy, I need all the
> details you can spare. It might also save you from having to give everyone
> your config, one post at a time. ;>)
>
> Tony
>
>
> "Kim W." <no@way.com> wrote in message news:451c1a58$1@linux...
>> No-name 768mb. (not running dual-channel).
>> I think one of them is A-data.
>> As far as the video cards go, there are heaps on eBay, but
>> make sure you get the right splitter cables for your needs.
>> Kim
>>
>> DJ" <notachance@net.net> wrote:
>>> How much RAM? What brand?
>>>
>>> "Kim W." <no@way.com> wrote in message news:451c121f$1@linux...
>>>> 3500+
>>>>
>>>> "DJ" <notachance@net.net> wrote:
>>>>> .........and what CPU are you using?
>>>>>
>>>>> "Steve L." <slavii@aol.com> wrote in message news:451c0bdf$1@linux...
>>>>>> what power supply are you useing ?
>>>>>>
>>>>>> "Kim W." <no@way.com> wrote:
>>>>>>> A bit hard to find these days, and a bit "old school", but they are
>>> still
>>>>>>> out there.
>>>>>>> Gigabyte K8NS Ultra 939. Works like a charm with XP and 4 EDS cards,
>>>> and
>>>>>>> two dual-head Nvidia VGA's.
>>>>>>> I Highly recommend it. No problems with IRQ's etc, just plug in
>>>>>>> all cards, and install XP. Easy.
>>>>>>>
>>>>>>> Kim
>>>>>>>
>>>>>>> "Steve L." <slavii@aol.com> wrote:
>>>>>>>> I am strongly considering building myself a new box and making the
>>>>> switch
>>>>>>> >from 98 to xp. Is there a list of moterboards (or any other
>>> hardware)
>>>>>> that
>>>>>>>> works best in running paris on XP. I will only use this computer
>> to
>>>> run
>>>>>>>> Paris. And if I have a system with 2 eds cards, one mec, one c16,
>> is
>>>> it
>>>>>>>> worth it for me to switch to XP ?
>>>>>>>> I rarely have projects with more than 32 tracks.
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>>
>>>>>>>> Steve L.
>>>>>
>>>
>
>
|
|
|
|
| Re: Paris running on xp mother board recomendations [message #73274 is a reply to message #73203] |
Fri, 29 September 2006 07:51 |
Rich Kelley
Messages: 19
Registered: October 2006
|
Junior Member |
|
|
Looking on the NVIDIA website, these cards only seem to have XP Drivers, true?
I'm trying to decide whether to go to XP or stay on 98. Except for large
HD support (>137GB), I can't see a reason to make the jump. This might be
one more reason.
My PARIS machine is dedicated to PARIS.
Rich Kelley
"Kim W" <no@way.com> wrote:
>
>OOPS!
>Try these for the PCI.
>Guess my copy/paste chops aren't up to it a 4am.
>
> http://cgi.ebay.com/NVIDIA-64MB-PCI-Graphics-Card-Quadro-NVS 280-DDR_W0QQitemZ140032418162QQihZ004QQcategoryZ96877QQrdZ1Q QcmdZViewItem
>
> http://cgi.ebay.com/PNY-NVIDIA-QUADRO-NVS-280-PCI-64MB-VCQ42 80NVS-PCI_W0QQitemZ110038297777QQihZ001QQcategoryZ64481QQrdZ 1QQcmdZViewItem
>
>>Lookie Here:
>>
>> http://cgi.ebay.com/Nvidia-Quadro-NVS-280-AGP-64mb-2x-4x-8x- Dual-Video_W0QQitemZ180032324096QQihZ008QQcategoryZ40161QQrd Z1QQcmdZViewItem
>>
>> http://cgi.ebay.com/Nvidia-Quadro-NVS-280-AGP-64mb-2x-4x-8x- Dual-Video_W0QQitemZ180032324980QQihZ008QQcategoryZ40161QQrd Z1QQcmdZViewItem
>>
>> http://cgi.ebay.com/NVIDIA-Quadro-NVS280-AGP-64mb-DDR-SDRAM- Excellent_W0QQitemZ260035231225QQihZ016QQcategoryZ40161QQrdZ 1QQcmdZViewItem
>>
>> http://cgi.ebay.com/NVIDIA-Quadro-NVS280-AGP-64mb-DDR-SDRAM- Excellent_W0QQitemZ260035231225QQihZ016QQcategoryZ40161QQrdZ 1QQcmdZViewItem
>>
>> http://cgi.ebay.com/NVIDIA-Quadro-NVS280-AGP-64mb-DDR-SDRAM- Excellent_W0QQitemZ260035231225QQihZ016QQcategoryZ40161QQrdZ 1QQcmdZViewItem
>>
>>Passive cooling, too. Nice and quiet.
>>
>>Kim
>>
>>"DJ" <notachance@net.net> wrote:
>>>Kim,
>>>
>>>Could you get me the model #'s of those video cards when you get a chance?
>>>
>>>thanks, oh moderating one
>>>
>>>;o)
>>>
>>>"Kim W" <no@way.com> wrote in message news:451c10ca$1@linux...
>>>>
>>>> Hi, DJ.
>>>> They are the original Quadros. (NVS 280 I think..)
>>>> Would have to check. Got them some time ago on ebay for next to
>>>> nothing. These are/were available in PCI and AGP.
>>>> Yes, sluttage is good!
>>>> Kim
>>>>
>>>> "DJ" <notachance@net.net> wrote:
>>>> >Ahhhh.....HA!!! ....sooooo....... you're using 4 monitors as well?
>I
>>>missed
>>>> >that. What kind of dual heads are you using? GEForce 5500's?
>>>> > BTW, your foray into wretched exess and componentry sluttage has made
>>me
>>>> >proud.
>>>> >
>>>> >;o)
>>>> >
>>>> >"Kim W" <no@way.com> wrote in message news:451bfec7$1@linux...
>>>> >>
>>>> >> Hi John.
>>>> >> Never used a Magma. I reckon you could probably even get 5 EDS's
>>>> >> working, but I need 4 monitors, so one of the pci slots has a
>>>> >> Nvidia Quadro in it.
>>>> >> Kim
>>>> >>
>>>> >> "John" <no@no.com> wrote:
>>>> >> >
>>>> >> >No problems with IRQs? What fun is that? Is 4 the most Paris can
>>go
>>>> >before
>>>> >> >a Magma chassis is needed? So how are the IRQs on the Magma again
>>>with
>>>> >> 8
>>>> >> >eds cards? It has one PCI interface card that goes in the host
pc
>>and
>>>> it
>>>> >> >uses 2(?) irqs and the chassis shares those two across the 8 cards?
>>>> How
>>>> >> >does that work?
>>>> >> >
>>>> >> >Thanks,
>>>> >> >John
>>>> >> >
>>>> >> >
>>>> >> >
>>>> >> >
>>>> >> >"Kim W." <no@way.com> wrote:
>>>> >> >>
>>>> >> >>A bit hard to find these days, and a bit "old school", but they
>are
>>>> >still
>>>> >> >>out there.
>>>> >> >>Gigabyte K8NS Ultra 939. Works like a charm with XP and 4 EDS cards,
>>>> and
>>>> >> >>two dual-head Nvidia VGA's.
>>>> >> >>I Highly recommend it. No problems with IRQ's etc, just plug in
>>>> >> >>all cards, and install XP. Easy.
>>>> >> >>
>>>> >> >>Kim
>>>> >> >>
>>>> >> >>"Steve L." <slavii@aol.com> wrote:
>>>> >> >>>
>>>> >> >>>I am strongly considering building myself a new box and making
>the
>>>> >switch
>>>> >> >>>from 98 to xp. Is there a list of moterboards (or any other
>>>hardware)
>>>> >> >that
>>>> >> >>>works best in running paris on XP. I will only use this computer
>>to
>>>> >run
>>>> >> >>>Paris. And if I have a system with 2 eds cards, one mec, one
c16,
>>>> is
>>>> >> it
>>>> >> >>>worth it for me to switch to XP ?
>>>> >> >>> I rarely have projects with more than 32 tracks.
>>>> >> >>>
>>>> >> >>>Thanks,
>>>> >> >>>
>>>> >> >>>Steve L.
>>>> >> >>
>>>> >> >
>>>> >>
>>>> >
>>>> >
>>>>
>>>
>>>
>>
>
|
|
|
|
| Re: Paris running on xp mother board recomendations [message #73370 is a reply to message #73274] |
Sat, 30 September 2006 11:18 |
Kim W
Messages: 165
Registered: July 2006
|
Senior Member |
|
|
Hi, Rich.
Sorry, your post slipped under the radar.
I was running these cards under win98 prior to switching to XP
earlier this year. Drivers are available.
Kim
"Rich Kelley" <r_and_b_junkmail@yahoo.com> wrote:
>
>Looking on the NVIDIA website, these cards only seem to have XP Drivers,
true?
>
>I'm trying to decide whether to go to XP or stay on 98. Except for large
>HD support (>137GB), I can't see a reason to make the jump. This might
be
>one more reason.
>
>My PARIS machine is dedicated to PARIS.
>
>Rich Kelley
>
>"Kim W" <no@way.com> wrote:
>>
>>OOPS!
>>Try these for the PCI.
>>Guess my copy/paste chops aren't up to it a 4am.
>>
>> http://cgi.ebay.com/NVIDIA-64MB-PCI-Graphics-Card-Quadro-NVS 280-DDR_W0QQitemZ140032418162QQihZ004QQcategoryZ96877QQrdZ1Q QcmdZViewItem
>>
>> http://cgi.ebay.com/PNY-NVIDIA-QUADRO-NVS-280-PCI-64MB-VCQ42 80NVS-PCI_W0QQitemZ110038297777QQihZ001QQcategoryZ64481QQrdZ 1QQcmdZViewItem
>>
>>>Lookie Here:
>>>
>>> http://cgi.ebay.com/Nvidia-Quadro-NVS-280-AGP-64mb-2x-4x-8x- Dual-Video_W0QQitemZ180032324096QQihZ008QQcategoryZ40161QQrd Z1QQcmdZViewItem
>>>
>>> http://cgi.ebay.com/Nvidia-Quadro-NVS-280-AGP-64mb-2x-4x-8x- Dual-Video_W0QQitemZ180032324980QQihZ008QQcategoryZ40161QQrd Z1QQcmdZViewItem
>>>
>>> http://cgi.ebay.com/NVIDIA-Quadro-NVS280-AGP-64mb-DDR-SDRAM- Excellent_W0QQitemZ260035231225QQihZ016QQcategoryZ40161QQrdZ 1QQcmdZViewItem
>>>
>>> http://cgi.ebay.com/NVIDIA-Quadro-NVS280-AGP-64mb-DDR-SDRAM- Excellent_W0QQitemZ260035231225QQihZ016QQcategoryZ40161QQrdZ 1QQcmdZViewItem
>>>
>>> http://cgi.ebay.com/NVIDIA-Quadro-NVS280-AGP-64mb-DDR-SDRAM- Excellent_W0QQitemZ260035231225QQihZ016QQcategoryZ40161QQrdZ 1QQcmdZViewItem
>>>
>>>Passive cooling, too. Nice and quiet.
>>>
>>>Kim
>>>
>>>"DJ" <notachance@net.net> wrote:
>>>>Kim,
>>>>
>>>>Could you get me the model #'s of those video cards when you get a chance?
>>>>
>>>>thanks, oh moderating one
>>>>
>>>>;o)
>>>>
>>>>"Kim W" <no@way.com> wrote in message news:451c10ca$1@linux...
>>>>>
>>>>> Hi, DJ.
>>>>> They are the original Quadros. (NVS 280 I think..)
>>>>> Would have to check. Got them some time ago on ebay for next to
>>>>> nothing. These are/were available in PCI and AGP.
>>>>> Yes, sluttage is good!
>>>>> Kim
>>>>>
>>>>> "DJ" <notachance@net.net> wrote:
>>>>> >Ahhhh.....HA!!! ....sooooo....... you're using 4 monitors as well?
>
>>I
>>>>missed
>>>>> >that. What kind of dual heads are you using? GEForce 5500's?
>>>>> > BTW, your foray into wretched exess and componentry sluttage has
made
>>>me
>>>>> >proud.
>>>>> >
>>>>> >;o)
>>>>> >
>>>>> >"Kim W" <no@way.com> wrote in message news:451bfec7$1@linux...
>>>>> >>
>>>>> >> Hi John.
>>>>> >> Never used a Magma. I reckon you could probably even get 5 EDS's
>>>>> >> working, but I need 4 monitors, so one of the pci slots has a
>>>>> >> Nvidia Quadro in it.
>>>>> >> Kim
>>>>> >>
>>>>> >> "John" <no@no.com> wrote:
>>>>> >> >
>>>>> >> >No problems with IRQs? What fun is that? Is 4 the most Paris
can
>>>go
>>>>> >before
>>>>> >> >a Magma chassis is needed? So how are the IRQs on the Magma again
>>>>with
>>>>> >> 8
>>>>> >> >eds cards? It has one PCI interface card that goes in the host
>pc
>>>and
>>>>> it
>>>>> >> >uses 2(?) irqs and the chassis shares those two across the 8 cards?
>>>>> How
>>>>> >> >does that work?
>>>>> >> >
>>>>> >> >Thanks,
>>>>> >> >John
>>>>> >> >
>>>>> >> >
>>>>> >> >
>>>>> >> >
>>>>> >> >"Kim W." <no@way.com> wrote:
>>>>> >> >>
>>>>> >> >>A bit hard to find these days, and a bit "old school", but they
>>are
>>>>> >still
>>>>> >> >>out there.
>>>>> >> >>Gigabyte K8NS Ultra 939. Works like a charm with XP and 4 EDS
cards,
>>>>> and
>>>>> >> >>two dual-head Nvidia VGA's.
>>>>> >> >>I Highly recommend it. No problems with IRQ's etc, just plug in
>>>>> >> >>all cards, and install XP. Easy.
>>>>> >> >>
>>>>> >> >>Kim
>>>>> >> >>
>>>>> >> >>"Steve L." <slavii@aol.com> wrote:
>>>>> >> >>>
>>>>> >> >>>I am strongly considering building myself a new box and making
>>the
>>>>> >switch
>>>>> >> >>>from 98 to xp. Is there a list of moterboards (or any other
>>>>hardware)
>>>>> >> >that
>>>>> >> >>>works best in running paris on XP. I will only use this computer
>>>to
>>>>> >run
>>>>> >> >>>Paris. And if I have a system with 2 eds cards, one mec, one
>c16,
>>>>> is
>>>>> >> it
>>>>> >> >>>worth it for me to switch to XP ?
>>>>> >> >>> I rarely have projects with more than 32 tracks.
>>>>> >> >>>
>>>>> >> >>>Thanks,
>>>>> >> >>>
>>>>> >> >>>Steve L.
>>>>> >> >>
>>>>> >> >
>>>>> >>
>>>>> >
>>>>> >
>>>>>
>>>>
>>>>
>>>
>>
>
|
|
|
|
|
|
|
|
| Re: Paris running on xp mother board recomendations [message #73467 is a reply to message #73397] |
Mon, 02 October 2006 08:33 |
Rich Kelley
Messages: 19
Registered: October 2006
|
Junior Member |
|
|
Thanks for the info Kim. I went and got the driver.
I noticed that most of these cards come with the analog splitter cable.
Only the PCI-e version seems to come standard with the DVI. Without the
DVI I can't see how it's better than my Matrox G450 (for PARIS). I'll keep
looking.
Thanks,
Rich
"Kim W" <no@way.com> wrote:
>
>Nvidia have a unified driver for win98. It supports all Nvidia
>GPU's. It's called "forceware".
>
>http://www.nvidia.com/object/win9x_53.04
>
>One thing. Some of these cards come with Splitter cables.
>(The connector on the card drives two seperate monitors via a
>breakout cable). If this is the case, make sure you buy cards
>with the splitters included. Also these come in either analog
>or DVI. Do a little research before bidding.
>
>Kim
>
>"Rich Kelley" <rich_and_barbara@netzero.net> wrote:
>>
>>"Kim W" <no@way.com> wrote:
>>Hi Kim,
>>
>>No problem. All I could find on the NVIDIA site was an XP driver. Do
I
>>use the same driver for 98? Should I try PNY's website (PNY is the manufacturer
>>of the card, right)?
>>
>>I'm going to try to pick up a couple of these cards. I just got some nice
>>new 1600x1200 LCD for my PARIS computer, so it would be nice to drive them
>>with the DVI input. I'm using Matrox G450s now (one AGP and one PCI).
>>
>>Rich
>>
>>>
>>>Hi, Rich.
>>>Sorry, your post slipped under the radar.
>>>I was running these cards under win98 prior to switching to XP
>>>earlier this year. Drivers are available.
>>>Kim
>>>
>>
>
|
|
|
|
Goto Forum:
Current Time: Mon Dec 16 08:57:12 PST 2024
Total time taken to generate the page: 0.01557 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
