Home » The PARIS Forums » PARIS: Main » OT Anyone know how to get Cubase SX to chase SMPTE?
|
|
Re: OT Anyone know how to get Cubase SX to chase SMPTE? [message #68569 is a reply to message #68568] |
Wed, 24 May 2006 18:13 |
Deej [1]
Messages: 2149 Registered: January 2006
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_0037_01C67F66.1DF31720
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Tom, answers below:
"Tom Bruhl" <arpegio@comcast.net> wrote in message =
news:44750054$1@linux...
Well I just read that the Cubase plugin is a SMPTE generator not a
reader. From what I can tell ADAT sync (from Paris using XP?)
or MTC are my only options.
I figured I'd end up with the RME HDSP 5692 card in the end.
Resistance is futile
Will Paris using XP be able to send ADAT sync to this card =
successfully?
Yes. always
I understand the Paris ADAT sync using XP doesn't work with an ADAT =
tape machine
but will it work with the RME this way?
Yes. It will work. I've personally done it with Paris on XP.=20
If so then I guess I have to buy that RME card now. Are there any =
other cards that=20
are better for this application?=20
Do you really need 24 ADAT I/O? The HDSP 9632 should work well for =
this. Also the HDSP PCI with a Multiface (v1) or Digiface breakout box =
will work. I have synced the Multiface (v1) to Paris with no problems. =
Multiface v2 doesn't have ADAT input so avoid that one.
I do need the MIDI, ADAT and MTC or ADAT sync anyway.
I didn't want to add a MIDI card to my Paris comp if it isn't =
necessary.
I am using the GenX WC now too.
If you decide on an HDSP 9632 and will need to use it as a standalone =
(not synced to Paris ADAT), you will need to buy the WC daughtercard for =
it.
Thanks,
Tom
Be usre that any RME interface you buy has the *HDSP* =
designation.....not the "Digi" designation. The "Digi" series is older =
and does not sync reliably to Paris ADAT.
Good luck,
Deej
"Tom Bruhl" <arpegio@comcast.net> wrote in message =
news:4474ed25@linux...
I think there's some kind of plugin that needs to be added that
may not be stock with the program. I want to send SMPTE from
Paris to Cubase so they can lock.
Anyone here familiar with the procedure? The Steinberg forum isn't =
letting me
search but I think I read the answer there at one time in the past.
As always thanks for your help.
Tom
I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
------=_NextPart_000_0037_01C67F66.1DF31720
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1106" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>
<DIV><FONT face=3DArial size=3D2>Tom, answers =
below:</FONT></DIV></FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Tom Bruhl" <<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> wrote =
in message=20
<A href=3D"news:44750054$1@linux">news:44750054$1@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>Well I just read that the Cubase =
plugin is a=20
SMPTE generator not a</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>reader. From what I can tell =
ADAT sync=20
(from Paris using XP?)</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>or MTC are my only =
options.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I figured I'd end up with the RME =
HDSP 5692 card=20
in the end.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><EM><STRONG>Resistance is=20
futile</STRONG></EM></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Will Paris using XP be able to send =
ADAT sync to=20
this card successfully?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Yes.=20
always</EM></STRONG></FONT></DIV>
<DIV><STRONG><EM><FONT face=3DArial =
size=3D2></FONT></EM></STRONG> </DIV>
<DIV><FONT face=3DArial size=3D2>I understand the Paris ADAT sync =
using XP doesn't=20
work with an ADAT tape machine</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>but will it work with the RME this=20
way?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Yes. It will work. I've =
personally=20
done it with Paris on XP. </EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>If so then I guess I have to buy that =
RME card=20
now. Are there any other cards that </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>are better for this=20
application? </FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Do you really need 24 =
ADAT I/O? The=20
HDSP 9632 should work well for this. Also the HDSP PCI with a =
Multiface=20
(v1) or Digiface breakout box will work. I have synced the =
Multiface=20
(v1) to Paris with no problems. Multiface v2 doesn't have ADAT =
input so=20
avoid that one.</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I do need the MIDI, ADAT and MTC or =
ADAT sync=20
anyway.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I didn't want to add a MIDI card to =
my Paris comp=20
if it isn't necessary.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I am using the GenX WC now =
too.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>If you decide on an =
HDSP 9632=20
and will need to use it as a standalone (not synced to Paris ADAT), =
you will=20
need to buy the WC daughtercard for it.</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Thanks,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Be usre that any RME =
interface you=20
buy has the *HDSP* designation.....not the "Digi" designation. The =
"Digi"=20
series is older and does not sync reliably to Paris=20
ADAT.</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Good =
luck,</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial =
size=3D2><STRONG><EM></EM></STRONG></FONT> </DIV >
<DIV><FONT face=3DArial =
size=3D2><STRONG><EM>Deej</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Tom Bruhl" <<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> =
wrote in=20
message <A =
href=3D"news:4474ed25@linux">news:4474ed25@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>I think there's some kind of plugin =
that needs=20
to be added that</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>may not be stock with the =
program. I want=20
to send SMPTE from</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Paris to Cubase so they can =
lock.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Anyone here familiar with the =
procedure? =20
The Steinberg forum isn't letting me</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>search but I think I read the =
answer there at=20
one time in the past.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>As always thanks for your =
help.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight =
spam, and=20
you?<BR><A=20
=
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A> </FONT></DIV></BLOCKQUOTE ></BLOCKQUOTE></BODY>=
</HTML>
------=_NextPart_000_0037_01C67F66.1DF31720--
|
|
|
Re: OT Anyone know how to get Cubase SX to chase SMPTE? [message #68570 is a reply to message #68569] |
Wed, 24 May 2006 20:18 |
Tom Bruhl
Messages: 1368 Registered: June 2007
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_0018_01C67F88.6504A1C0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Thanks for the call Deej. Thanks to you I know what I have to do now.
Spend more money.
Ha!
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message =
news:44750590@linux...
Tom, answers below:
"Tom Bruhl" <arpegio@comcast.net> wrote in message =
news:44750054$1@linux...
Well I just read that the Cubase plugin is a SMPTE generator not a
reader. From what I can tell ADAT sync (from Paris using XP?)
or MTC are my only options.
I figured I'd end up with the RME HDSP 5692 card in the end.
Resistance is futile
Will Paris using XP be able to send ADAT sync to this card =
successfully?
Yes. always
I understand the Paris ADAT sync using XP doesn't work with an ADAT =
tape machine
but will it work with the RME this way?
Yes. It will work. I've personally done it with Paris on XP.=20
If so then I guess I have to buy that RME card now. Are there any =
other cards that=20
are better for this application?=20
Do you really need 24 ADAT I/O? The HDSP 9632 should work well for =
this. Also the HDSP PCI with a Multiface (v1) or Digiface breakout box =
will work. I have synced the Multiface (v1) to Paris with no problems. =
Multiface v2 doesn't have ADAT input so avoid that one.
I do need the MIDI, ADAT and MTC or ADAT sync anyway.
I didn't want to add a MIDI card to my Paris comp if it isn't =
necessary.
I am using the GenX WC now too.
If you decide on an HDSP 9632 and will need to use it as a =
standalone (not synced to Paris ADAT), you will need to buy the WC =
daughtercard for it.
Thanks,
Tom
Be usre that any RME interface you buy has the *HDSP* =
designation.....not the "Digi" designation. The "Digi" series is older =
and does not sync reliably to Paris ADAT.
Good luck,
Deej
"Tom Bruhl" <arpegio@comcast.net> wrote in message =
news:4474ed25@linux...
I think there's some kind of plugin that needs to be added that
may not be stock with the program. I want to send SMPTE from
Paris to Cubase so they can lock.
Anyone here familiar with the procedure? The Steinberg forum =
isn't letting me
search but I think I read the answer there at one time in the =
past.
As always thanks for your help.
Tom
I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
------=_NextPart_000_0018_01C67F88.6504A1C0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Thanks for the call Deej. Thanks =
to you I=20
know what I have to do now.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Spend more money.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Ha!</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"DJ" <<A=20
=
href=3D"mailto:animix_spam-this-ahole_@animas.net">animix_spam-this-ahole=
_@animas.net</A>>=20
wrote in message <A=20
href=3D"news:44750590@linux">news:44750590@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>
<DIV><FONT face=3DArial size=3D2>Tom, answers =
below:</FONT></DIV></FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Tom Bruhl" <<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> =
wrote in=20
message <A =
href=3D"news:44750054$1@linux">news:44750054$1@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>Well I just read that the Cubase =
plugin is a=20
SMPTE generator not a</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>reader. From what I can tell =
ADAT sync=20
(from Paris using XP?)</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>or MTC are my only =
options.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I figured I'd end up with the RME =
HDSP 5692=20
card in the end.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><EM><STRONG>Resistance is=20
futile</STRONG></EM></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Will Paris using XP be able to send =
ADAT sync=20
to this card successfully?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Yes.=20
always</EM></STRONG></FONT></DIV>
<DIV><STRONG><EM><FONT face=3DArial =
size=3D2></FONT></EM></STRONG> </DIV>
<DIV><FONT face=3DArial size=3D2>I understand the Paris ADAT sync =
using XP=20
doesn't work with an ADAT tape machine</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>but will it work with the RME this=20
way?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Yes. It will work. I've =
personally=20
done it with Paris on XP. </EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>If so then I guess I have to buy =
that RME card=20
now. Are there any other cards that </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>are better for this=20
application? </FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Do you really need 24 =
ADAT I/O? The=20
HDSP 9632 should work well for this. Also the HDSP PCI with a =
Multiface=20
(v1) or Digiface breakout box will work. I have synced the =
Multiface=20
(v1) to Paris with no problems. Multiface v2 doesn't have ADAT =
input so=20
avoid that one.</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I do need the MIDI, ADAT and MTC or =
ADAT sync=20
anyway.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I didn't want to add a MIDI card to =
my Paris=20
comp if it isn't necessary.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I am using the GenX WC now =
too.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>If you decide on an =
HDSP 9632=20
and will need to use it as a standalone (not synced to Paris ADAT), =
you will=20
need to buy the WC daughtercard for it.</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Thanks,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Be usre that any RME =
interface you=20
buy has the *HDSP* designation.....not the "Digi" designation. The =
"Digi"=20
series is older and does not sync reliably to Paris=20
ADAT.</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Good=20
luck,</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial =
size=3D2><STRONG><EM></EM></STRONG></FONT> </DIV >
<DIV><FONT face=3DArial =
size=3D2><STRONG><EM>Deej</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Tom Bruhl" <<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> =
wrote in=20
message <A =
href=3D"news:4474ed25@linux">news:4474ed25@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>I think there's some kind of =
plugin that=20
needs to be added that</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>may not be stock with the =
program. I=20
want to send SMPTE from</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Paris to Cubase so they can=20
lock.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Anyone here familiar with the=20
procedure? The Steinberg forum isn't letting me</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>search but I think I read the =
answer there at=20
one time in the past.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>As always thanks for your =
help.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight =
spam, and=20
you?<BR><A=20
=
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A> </FONT></DIV></BLOCKQUOTE ></BLOCKQUOTE></BLOCK=
QUOTE></BODY></HTML>
------=_NextPart_000_0018_01C67F88.6504A1C0--
|
|
|
Re: OT Anyone know how to get Cubase SX to chase SMPTE? [message #68571 is a reply to message #68570] |
Wed, 24 May 2006 20:54 |
Deej [1]
Messages: 2149 Registered: January 2006
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_000F_01C67F7C.9834B0A0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
It never ends.
"Tom Bruhl" <arpegio@comcast.net> wrote in message =
news:4475210b@linux...
Thanks for the call Deej. Thanks to you I know what I have to do now.
Spend more money.
Ha!
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message =
news:44750590@linux...
Tom, answers below:
"Tom Bruhl" <arpegio@comcast.net> wrote in message =
news:44750054$1@linux...
Well I just read that the Cubase plugin is a SMPTE generator not a
reader. From what I can tell ADAT sync (from Paris using XP?)
or MTC are my only options.
I figured I'd end up with the RME HDSP 5692 card in the end.
Resistance is futile
Will Paris using XP be able to send ADAT sync to this card =
successfully?
Yes. always
I understand the Paris ADAT sync using XP doesn't work with an =
ADAT tape machine
but will it work with the RME this way?
Yes. It will work. I've personally done it with Paris on XP.=20
If so then I guess I have to buy that RME card now. Are there any =
other cards that=20
are better for this application?=20
Do you really need 24 ADAT I/O? The HDSP 9632 should work well for =
this. Also the HDSP PCI with a Multiface (v1) or Digiface breakout box =
will work. I have synced the Multiface (v1) to Paris with no problems. =
Multiface v2 doesn't have ADAT input so avoid that one.
I do need the MIDI, ADAT and MTC or ADAT sync anyway.
I didn't want to add a MIDI card to my Paris comp if it isn't =
necessary.
I am using the GenX WC now too.
If you decide on an HDSP 9632 and will need to use it as a =
standalone (not synced to Paris ADAT), you will need to buy the WC =
daughtercard for it.
Thanks,
Tom
Be usre that any RME interface you buy has the *HDSP* =
designation.....not the "Digi" designation. The "Digi" series is older =
and does not sync reliably to Paris ADAT.
Good luck,
Deej
"Tom Bruhl" <arpegio@comcast.net> wrote in message =
news:4474ed25@linux...
I think there's some kind of plugin that needs to be added that
may not be stock with the program. I want to send SMPTE from
Paris to Cubase so they can lock.
Anyone here familiar with the procedure? The Steinberg forum =
isn't letting me
search but I think I read the answer there at one time in the =
past.
As always thanks for your help.
Tom
I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
------=_NextPart_000_000F_01C67F7C.9834B0A0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1106" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>It never ends.</FONT></DIV>
<DIV> </DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Tom Bruhl" <<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> wrote =
in message=20
<A href=3D"news:4475210b@linux">news:4475210b@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>Thanks for the call Deej. =
Thanks to you I=20
know what I have to do now.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Spend more money.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Ha!</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"DJ" <<A=20
=
href=3D"mailto:animix_spam-this-ahole_@animas.net">animix_spam-this-ahole=
_@animas.net</A>>=20
wrote in message <A=20
href=3D"news:44750590@linux">news:44750590@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>
<DIV><FONT face=3DArial size=3D2>Tom, answers =
below:</FONT></DIV></FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Tom Bruhl" <<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> =
wrote in=20
message <A =
href=3D"news:44750054$1@linux">news:44750054$1@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>Well I just read that the Cubase =
plugin is a=20
SMPTE generator not a</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>reader. From what I can =
tell ADAT sync=20
(from Paris using XP?)</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>or MTC are my only =
options.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I figured I'd end up with the RME =
HDSP 5692=20
card in the end.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><EM><STRONG>Resistance is=20
futile</STRONG></EM></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Will Paris using XP be able to =
send ADAT sync=20
to this card successfully?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Yes.=20
always</EM></STRONG></FONT></DIV>
<DIV><STRONG><EM><FONT face=3DArial =
size=3D2></FONT></EM></STRONG> </DIV>
<DIV><FONT face=3DArial size=3D2>I understand the Paris ADAT sync =
using XP=20
doesn't work with an ADAT tape machine</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>but will it work with the RME =
this=20
way?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Yes. It will work. =
I've=20
personally done it with Paris on XP. </EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>If so then I guess I have to buy =
that RME=20
card now. Are there any other cards that </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>are better for this=20
application? </FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Do you really need 24 =
ADAT I/O?=20
The HDSP 9632 should work well for this. Also the HDSP PCI with a=20
Multiface (v1) or Digiface breakout box will work. I have =
synced the=20
Multiface (v1) to Paris with no problems. Multiface v2 =
doesn't have=20
ADAT input so avoid that one.</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I do need the MIDI, ADAT and MTC =
or ADAT sync=20
anyway.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I didn't want to add a MIDI card =
to my Paris=20
comp if it isn't necessary.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I am using the GenX WC now =
too.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>If you decide on an=20
HDSP 9632 and will need to use it as a standalone (not synced =
to=20
Paris ADAT), you will need to buy the WC daughtercard for=20
it.</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Thanks,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Be usre that any RME =
interface=20
you buy has the *HDSP* designation.....not the "Digi" designation. =
The=20
"Digi" series is older and does not sync reliably to Paris=20
ADAT.</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Good=20
luck,</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial =
size=3D2><STRONG><EM></EM></STRONG></FONT> </DIV >
<DIV><FONT face=3DArial =
size=3D2><STRONG><EM>Deej</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Tom Bruhl" <<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> =
wrote in=20
message <A =
href=3D"news:4474ed25@linux">news:4474ed25@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>I think there's some kind of =
plugin that=20
needs to be added that</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>may not be stock with the =
program. I=20
want to send SMPTE from</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Paris to Cubase so they can=20
lock.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Anyone here familiar with the=20
procedure? The Steinberg forum isn't letting =
me</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>search but I think I read the =
answer there=20
at one time in the past.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>As always thanks for your=20
help.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight =
spam, and=20
you?<BR><A=20
=
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A> </FONT></DIV></BLOCKQUOTE ></BLOCKQUOTE></BLOCK=
QUOTE></BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_000F_01C67F7C.9834B0A0--
|
|
|
Re: OT Anyone know how to get Cubase SX to chase SMPTE? [message #68572 is a reply to message #68571] |
Wed, 24 May 2006 22:31 |
Tom Bruhl
Messages: 1368 Registered: June 2007
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_003D_01C67F9B.00B94C80
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Major good just occurred for me with all of this MIDI and timecode=20
stuff. Thanks to Rick and Deej and a little fiddlin' and diddlin'
I have SMPTE sending to Cubase from Paris through the
MidiSport 8x8 and easily getting to all hardware and=20
softsynths together. This is a major hurdle. Now I don't
have to spring for the RME card until I spring for a super
duper Cubase/softsynth rig in the not too distant future.
The next hurdle is the sysex dilemma that the Motu was not
participating with. We shall see if the MidiSport is up to=20
the task. I read that Cubase is finicky with sysex too.
I hope Steinberg isn't the culprit. The Motu software was as
flakey as it gets though.
Thanks guys!
Tom
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message =
news:44752b39@linux...
It never ends.
"Tom Bruhl" <arpegio@comcast.net> wrote in message =
news:4475210b@linux...
Thanks for the call Deej. Thanks to you I know what I have to do =
now.
Spend more money.
Ha!
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message =
news:44750590@linux...
Tom, answers below:
"Tom Bruhl" <arpegio@comcast.net> wrote in message =
news:44750054$1@linux...
Well I just read that the Cubase plugin is a SMPTE generator not =
a
reader. From what I can tell ADAT sync (from Paris using XP?)
or MTC are my only options.
I figured I'd end up with the RME HDSP 5692 card in the end.
Resistance is futile
Will Paris using XP be able to send ADAT sync to this card =
successfully?
Yes. always
I understand the Paris ADAT sync using XP doesn't work with an =
ADAT tape machine
but will it work with the RME this way?
Yes. It will work. I've personally done it with Paris on XP.=20
If so then I guess I have to buy that RME card now. Are there =
any other cards that=20
are better for this application?=20
Do you really need 24 ADAT I/O? The HDSP 9632 should work well =
for this. Also the HDSP PCI with a Multiface (v1) or Digiface breakout =
box will work. I have synced the Multiface (v1) to Paris with no =
problems. Multiface v2 doesn't have ADAT input so avoid that one.
I do need the MIDI, ADAT and MTC or ADAT sync anyway.
I didn't want to add a MIDI card to my Paris comp if it isn't =
necessary.
I am using the GenX WC now too.
If you decide on an HDSP 9632 and will need to use it as a =
standalone (not synced to Paris ADAT), you will need to buy the WC =
daughtercard for it.
Thanks,
Tom
Be usre that any RME interface you buy has the *HDSP* =
designation.....not the "Digi" designation. The "Digi" series is older =
and does not sync reliably to Paris ADAT.
Good luck,
Deej
"Tom Bruhl" <arpegio@comcast.net> wrote in message =
news:4474ed25@linux...
I think there's some kind of plugin that needs to be added =
that
may not be stock with the program. I want to send SMPTE from
Paris to Cubase so they can lock.
Anyone here familiar with the procedure? The Steinberg forum =
isn't letting me
search but I think I read the answer there at one time in the =
past.
As always thanks for your help.
Tom
I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
------=_NextPart_000_003D_01C67F9B.00B94C80
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Major good just occurred for me with =
all of this=20
MIDI and timecode </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>stuff. </FONT><FONT face=3DArial =
size=3D2>Thanks=20
to Rick and Deej and a little fiddlin' and diddlin'</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I have SMPTE sending to Cubase from =
Paris through=20
the</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>MidiSport 8x8 and easily getting to all =
hardware=20
and </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>softsynths together. This is a =
major=20
hurdle. Now I don't</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>have to spring for the RME card until I =
spring for=20
a super</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>duper Cubase/softsynth rig in the not =
too distant=20
future.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>The next hurdle is the sysex dilemma =
that the Motu=20
was not</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>participating with. We shall see =
if the=20
MidiSport is up to </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>the task. I read that Cubase is =
finicky with=20
sysex too.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I hope Steinberg isn't the =
culprit. The Motu=20
software was as</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>flakey as it gets though.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Thanks guys!</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"DJ" <<A=20
=
href=3D"mailto:animix_spam-this-ahole_@animas.net">animix_spam-this-ahole=
_@animas.net</A>>=20
wrote in message <A=20
href=3D"news:44752b39@linux">news:44752b39@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>It never ends.</FONT></DIV>
<DIV> </DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Tom Bruhl" <<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> =
wrote in=20
message <A =
href=3D"news:4475210b@linux">news:4475210b@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>Thanks for the call Deej. =
Thanks to you I=20
know what I have to do now.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Spend more money.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Ha!</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"DJ" <<A=20
=
href=3D"mailto:animix_spam-this-ahole_@animas.net">animix_spam-this-ahole=
_@animas.net</A>>=20
wrote in message <A=20
href=3D"news:44750590@linux">news:44750590@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>
<DIV><FONT face=3DArial size=3D2>Tom, answers =
below:</FONT></DIV></FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Tom Bruhl" <<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> =
wrote in=20
message <A=20
=
href=3D"news:44750054$1@linux">news:44750054$1@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>Well I just read that the =
Cubase plugin is=20
a SMPTE generator not a</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>reader. From what I can =
tell ADAT=20
sync (from Paris using XP?)</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>or MTC are my only =
options.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I figured I'd end up with the =
RME HDSP 5692=20
card in the end.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><EM><STRONG>Resistance is=20
futile</STRONG></EM></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Will Paris using XP be able to =
send ADAT=20
sync to this card successfully?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Yes.=20
always</EM></STRONG></FONT></DIV>
<DIV><STRONG><EM><FONT face=3DArial=20
size=3D2></FONT></EM></STRONG> </DIV>
<DIV><FONT face=3DArial size=3D2>I understand the Paris ADAT =
sync using XP=20
doesn't work with an ADAT tape machine</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>but will it work with the RME =
this=20
way?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Yes. It will work. =
I've=20
personally done it with Paris on XP. </EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>If so then I guess I have to =
buy that RME=20
card now. Are there any other cards that </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>are better for this=20
application? </FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Do you really need =
24 ADAT I/O?=20
The HDSP 9632 should work well for this. Also the HDSP PCI with =
a=20
Multiface (v1) or Digiface breakout box will work. I have =
synced=20
the Multiface (v1) to Paris with no problems. Multiface v2 =
doesn't=20
have ADAT input so avoid that one.</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I do need the MIDI, ADAT and =
MTC or ADAT=20
sync anyway.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I didn't want to add a MIDI =
card to my=20
Paris comp if it isn't necessary.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I am using the GenX WC now=20
too.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>If you decide on an =
HDSP 9632 and will need to use it as a standalone (not =
synced to=20
Paris ADAT), you will need to buy the WC daughtercard for=20
it.</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Thanks,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Be usre that any =
RME interface=20
you buy has the *HDSP* designation.....not the "Digi" =
designation. The=20
"Digi" series is older and does not sync reliably to Paris=20
ADAT.</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Good=20
luck,</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial=20
size=3D2><STRONG><EM></EM></STRONG></FONT> </DIV >
<DIV><FONT face=3DArial =
size=3D2><STRONG><EM>Deej</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: =
5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Tom Bruhl" <<A=20
=
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> wrote in =
message <A =
href=3D"news:4474ed25@linux">news:4474ed25@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>I think there's some kind of =
plugin that=20
needs to be added that</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>may not be stock with the =
program. =20
I want to send SMPTE from</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Paris to Cubase so they can=20
lock.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Anyone here familiar with the =
procedure? The Steinberg forum isn't letting =
me</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>search but I think I read the =
answer=20
there at one time in the past.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>As always thanks for your=20
help.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to =
fight spam,=20
and you?<BR><A=20
=
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A> </FONT></DIV></BLOCKQUOTE ></BLOCKQUOTE></BLOCK=
QUOTE></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_003D_01C67F9B.00B94C80--
|
|
|
Re: OT Anyone know how to get Cubase SX to chase SMPTE? [message #68606 is a reply to message #68572] |
Fri, 26 May 2006 05:49 |
Rob Arsenault
Messages: 152 Registered: September 2005
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_0062_01C680A9.A26F7680
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Tom , your midisport 8x8 is installed in your native rig along with =
Cubase SX rite? And you are doing the realtime processing with UAD-1 in =
your native rig from Paris with full delay compensation rite? Man, I =
might be able to do this with my existing setup.........!!!!
"Tom Bruhl" <arpegio@comcast.net> wrote in message =
news:44754042@linux...
Major good just occurred for me with all of this MIDI and timecode=20
stuff. Thanks to Rick and Deej and a little fiddlin' and diddlin'
I have SMPTE sending to Cubase from Paris through the
MidiSport 8x8 and easily getting to all hardware and=20
softsynths together. This is a major hurdle. Now I don't
have to spring for the RME card until I spring for a super
duper Cubase/softsynth rig in the not too distant future.
The next hurdle is the sysex dilemma that the Motu was not
participating with. We shall see if the MidiSport is up to=20
the task. I read that Cubase is finicky with sysex too.
I hope Steinberg isn't the culprit. The Motu software was as
flakey as it gets though.
Thanks guys!
Tom
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message =
news:44752b39@linux...
It never ends.
"Tom Bruhl" <arpegio@comcast.net> wrote in message =
news:4475210b@linux...
Thanks for the call Deej. Thanks to you I know what I have to do =
now.
Spend more money.
Ha!
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message =
news:44750590@linux...
Tom, answers below:
"Tom Bruhl" <arpegio@comcast.net> wrote in message =
news:44750054$1@linux...
Well I just read that the Cubase plugin is a SMPTE generator =
not a
reader. From what I can tell ADAT sync (from Paris using XP?)
or MTC are my only options.
I figured I'd end up with the RME HDSP 5692 card in the end.
Resistance is futile
Will Paris using XP be able to send ADAT sync to this card =
successfully?
Yes. always
I understand the Paris ADAT sync using XP doesn't work with an =
ADAT tape machine
but will it work with the RME this way?
Yes. It will work. I've personally done it with Paris on XP.=20
If so then I guess I have to buy that RME card now. Are there =
any other cards that=20
are better for this application?=20
Do you really need 24 ADAT I/O? The HDSP 9632 should work well =
for this. Also the HDSP PCI with a Multiface (v1) or Digiface breakout =
box will work. I have synced the Multiface (v1) to Paris with no =
problems. Multiface v2 doesn't have ADAT input so avoid that one.
I do need the MIDI, ADAT and MTC or ADAT sync anyway.
I didn't want to add a MIDI card to my Paris comp if it isn't =
necessary.
I am using the GenX WC now too.
If you decide on an HDSP 9632 and will need to use it as a =
standalone (not synced to Paris ADAT), you will need to buy the WC =
daughtercard for it.
Thanks,
Tom
Be usre that any RME interface you buy has the *HDSP* =
designation.....not the "Digi" designation. The "Digi" series is older =
and does not sync reliably to Paris ADAT.
Good luck,
Deej
"Tom Bruhl" <arpegio@comcast.net> wrote in message =
news:4474ed25@linux...
I think there's some kind of plugin that needs to be added =
that
may not be stock with the program. I want to send SMPTE =
from
Paris to Cubase so they can lock.
Anyone here familiar with the procedure? The Steinberg =
forum isn't letting me
search but I think I read the answer there at one time in =
the past.
As always thanks for your help.
Tom
I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
------=_NextPart_000_0062_01C680A9.A26F7680
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2900.2873" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT size=3D2>Tom , your midisport 8x8 is installed in =
your native rig=20
along with Cubase SX rite? And you are doing the realtime =
processing with=20
UAD-1 in your native rig from Paris with full delay compensation rite? =
Man, I=20
might be able to do this with my existing setup.........!!!!</FONT><FONT =
size=3D2></FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV>"Tom Bruhl" <<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> wrote in =
message=20
<A href=3D"news:44754042@linux">news:44754042@linux</A>...</DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV><FONT face=3DArial size=3D2>Major good just occurred for me with =
all of this=20
MIDI and timecode </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>stuff. </FONT><FONT =
face=3DArial=20
size=3D2>Thanks to Rick and Deej and a little fiddlin' and =
diddlin'</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I have SMPTE sending to Cubase from =
Paris through=20
the</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>MidiSport 8x8 and easily getting to =
all hardware=20
and </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>softsynths together. This is a =
major=20
hurdle. Now I don't</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>have to spring for the RME card until =
I spring=20
for a super</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>duper Cubase/softsynth rig in the not =
too distant=20
future.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>The next hurdle is the sysex dilemma =
that the=20
Motu was not</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>participating with. We shall =
see if the=20
MidiSport is up to </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>the task. I read that Cubase is =
finicky=20
with sysex too.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I hope Steinberg isn't the =
culprit. The=20
Motu software was as</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>flakey as it gets =
though.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Thanks guys!</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"DJ" <<A=20
=
href=3D"mailto:animix_spam-this-ahole_@animas.net">animix_spam-this-ahole=
_@animas.net</A>>=20
wrote in message <A=20
href=3D"news:44752b39@linux">news:44752b39@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>It never ends.</FONT></DIV>
<DIV> </DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Tom Bruhl" <<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> =
wrote in=20
message <A =
href=3D"news:4475210b@linux">news:4475210b@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>Thanks for the call Deej. =
Thanks to you=20
I know what I have to do now.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Spend more money.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Ha!</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"DJ" <<A=20
=
href=3D"mailto:animix_spam-this-ahole_@animas.net">animix_spam-this-ahole=
_@animas.net</A>>=20
wrote in message <A=20
href=3D"news:44750590@linux">news:44750590@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>
<DIV><FONT face=3DArial size=3D2>Tom, answers=20
below:</FONT></DIV></FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: =
5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Tom Bruhl" <<A=20
=
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> wrote in =
message <A=20
=
href=3D"news:44750054$1@linux">news:44750054$1@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>Well I just read that the =
Cubase plugin=20
is a SMPTE generator not a</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>reader. From what I can =
tell ADAT=20
sync (from Paris using XP?)</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>or MTC are my only =
options.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I figured I'd end up with the =
RME HDSP=20
5692 card in the end.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><EM><STRONG>Resistance is=20
futile</STRONG></EM></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Will Paris using XP be able =
to send ADAT=20
sync to this card successfully?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Yes.=20
always</EM></STRONG></FONT></DIV>
<DIV><STRONG><EM><FONT face=3DArial=20
size=3D2></FONT></EM></STRONG> </DIV>
<DIV><FONT face=3DArial size=3D2>I understand the Paris ADAT =
sync using XP=20
doesn't work with an ADAT tape machine</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>but will it work with the RME =
this=20
way?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Yes. It will =
work. I've=20
personally done it with Paris on XP. =
</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>If so then I guess I have to =
buy that RME=20
card now. Are there any other cards that </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>are better for this=20
application? </FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Do you really =
need 24 ADAT=20
I/O? The HDSP 9632 should work well for this. Also the HDSP =
PCI with a=20
Multiface (v1) or Digiface breakout box will work. I have =
synced=20
the Multiface (v1) to Paris with no problems. Multiface =
v2=20
doesn't have ADAT input so avoid that =
one.</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I do need the MIDI, ADAT and =
MTC or ADAT=20
sync anyway.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I didn't want to add a MIDI =
card to my=20
Paris comp if it isn't necessary.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I am using the GenX WC now=20
too.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>If you decide on =
an=20
HDSP 9632 and will need to use it as a standalone (not =
synced to=20
Paris ADAT), you will need to buy the WC daughtercard for=20
it.</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Thanks,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Be usre that any =
RME=20
interface you buy has the *HDSP* designation.....not the =
"Digi"=20
designation. The "Digi" series is older and does not sync =
reliably to=20
Paris ADAT.</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Good=20
luck,</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial=20
size=3D2><STRONG><EM></EM></STRONG></FONT> </DIV >
<DIV><FONT face=3DArial=20
size=3D2><STRONG><EM>Deej</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: =
5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Tom Bruhl" <<A=20
=
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> wrote=20
in message <A=20
=
href=3D"news:4474ed25@linux">news:4474ed25@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>I think there's some kind =
of plugin=20
that needs to be added that</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>may not be stock with the=20
program. I want to send SMPTE from</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Paris to Cubase so they can =
lock.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Anyone here familiar with =
the=20
procedure? The Steinberg forum isn't letting =
me</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>search but I think I read =
the answer=20
there at one time in the past.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>As always thanks for your=20
help.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to =
fight spam,=20
and you?<BR><A=20
=
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A> </FONT></DIV></BLOCKQUOTE ></BLOCKQUOTE></BLOCK=
QUOTE></BLOCKQUOTE></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML >
------=_NextPart_000_0062_01C680A9.A26F7680--
|
|
|
Re: OT Anyone know how to get Cubase SX to chase SMPTE? [message #68609 is a reply to message #68606] |
Fri, 26 May 2006 07:03 |
Tom Bruhl
Messages: 1368 Registered: June 2007
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_00B8_01C680AB.A0C81D30
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Rob,
I haven't tried any of that yet. My UAD is in my Paris rig.
I suppose the Cubase plugs and a few other VSTs would be a=20
place to start just to see if it works.
Tom
"Rob Arsenault" <info@studiomanitou.com> wrote in message =
news:4476f69e@linux...
Tom , your midisport 8x8 is installed in your native rig along with =
Cubase SX rite? And you are doing the realtime processing with UAD-1 in =
your native rig from Paris with full delay compensation rite? Man, I =
might be able to do this with my existing setup.........!!!!
"Tom Bruhl" <arpegio@comcast.net> wrote in message =
news:44754042@linux...
Major good just occurred for me with all of this MIDI and timecode=20
stuff. Thanks to Rick and Deej and a little fiddlin' and diddlin'
I have SMPTE sending to Cubase from Paris through the
MidiSport 8x8 and easily getting to all hardware and=20
softsynths together. This is a major hurdle. Now I don't
have to spring for the RME card until I spring for a super
duper Cubase/softsynth rig in the not too distant future.
The next hurdle is the sysex dilemma that the Motu was not
participating with. We shall see if the MidiSport is up to=20
the task. I read that Cubase is finicky with sysex too.
I hope Steinberg isn't the culprit. The Motu software was as
flakey as it gets though.
Thanks guys!
Tom
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message =
news:44752b39@linux...
It never ends.
"Tom Bruhl" <arpegio@comcast.net> wrote in message =
news:4475210b@linux...
Thanks for the call Deej. Thanks to you I know what I have to =
do now.
Spend more money.
Ha!
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message =
news:44750590@linux...
Tom, answers below:
"Tom Bruhl" <arpegio@comcast.net> wrote in message =
news:44750054$1@linux...
Well I just read that the Cubase plugin is a SMPTE generator =
not a
reader. From what I can tell ADAT sync (from Paris using =
XP?)
or MTC are my only options.
I figured I'd end up with the RME HDSP 5692 card in the end.
Resistance is futile
Will Paris using XP be able to send ADAT sync to this card =
successfully?
Yes. always
I understand the Paris ADAT sync using XP doesn't work with =
an ADAT tape machine
but will it work with the RME this way?
Yes. It will work. I've personally done it with Paris on XP. =
If so then I guess I have to buy that RME card now. Are =
there any other cards that=20
are better for this application?=20
Do you really need 24 ADAT I/O? The HDSP 9632 should work =
well for this. Also the HDSP PCI with a Multiface (v1) or Digiface =
breakout box will work. I have synced the Multiface (v1) to Paris with =
no problems. Multiface v2 doesn't have ADAT input so avoid that one.
I do need the MIDI, ADAT and MTC or ADAT sync anyway.
I didn't want to add a MIDI card to my Paris comp if it =
isn't necessary.
I am using the GenX WC now too.
If you decide on an HDSP 9632 and will need to use it as a =
standalone (not synced to Paris ADAT), you will need to buy the WC =
daughtercard for it.
Thanks,
Tom
Be usre that any RME interface you buy has the *HDSP* =
designation.....not the "Digi" designation. The "Digi" series is older =
and does not sync reliably to Paris ADAT.
Good luck,
Deej
"Tom Bruhl" <arpegio@comcast.net> wrote in message =
news:4474ed25@linux...
I think there's some kind of plugin that needs to be added =
that
may not be stock with the program. I want to send SMPTE =
from
Paris to Cubase so they can lock.
Anyone here familiar with the procedure? The Steinberg =
forum isn't letting me
search but I think I read the answer there at one time in =
the past.
As always thanks for your help.
Tom
I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
------=_NextPart_000_00B8_01C680AB.A0C81D30
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Rob,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I haven't tried any of that yet. =
My UAD is in=20
my Paris rig.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I suppose the Cubase plugs and a few =
other VSTs=20
would be a </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>place to start </FONT><FONT =
face=3DArial size=3D2>just=20
to see if it works.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Rob Arsenault" <<A=20
href=3D"mailto:info@studiomanitou.com">info@studiomanitou.com</A>> =
wrote in=20
message <A =
href=3D"news:4476f69e@linux">news:4476f69e@linux</A>...</DIV>
<DIV><FONT size=3D2>Tom , your midisport 8x8 is installed in =
your native=20
rig along with Cubase SX rite? And you are doing the realtime =
processing=20
with UAD-1 in your native rig from Paris with full delay compensation =
rite?=20
Man, I might be able to do this with my existing=20
setup.........!!!!</FONT><FONT size=3D2></FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV>"Tom Bruhl" <<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> wrote =
in message=20
<A href=3D"news:44754042@linux">news:44754042@linux</A>...</DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV><FONT face=3DArial size=3D2>Major good just occurred for me =
with all of=20
this MIDI and timecode </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>stuff. </FONT><FONT =
face=3DArial=20
size=3D2>Thanks to Rick and Deej and a little fiddlin' and=20
diddlin'</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I have SMPTE sending to Cubase from =
Paris=20
through the</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>MidiSport 8x8 and easily getting to =
all=20
hardware and </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>softsynths together. This is =
a major=20
hurdle. Now I don't</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>have to spring for the RME card =
until I spring=20
for a super</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>duper Cubase/softsynth rig in the =
not too=20
distant future.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>The next hurdle is the sysex =
dilemma that the=20
Motu was not</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>participating with. We shall =
see if the=20
MidiSport is up to </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>the task. I read that Cubase =
is finicky=20
with sysex too.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I hope Steinberg isn't the =
culprit. The=20
Motu software was as</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>flakey as it gets =
though.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Thanks guys!</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"DJ" <<A=20
=
href=3D"mailto:animix_spam-this-ahole_@animas.net">animix_spam-this-ahole=
_@animas.net</A>>=20
wrote in message <A=20
href=3D"news:44752b39@linux">news:44752b39@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>It never ends.</FONT></DIV>
<DIV> </DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Tom Bruhl" <<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> =
wrote in=20
message <A =
href=3D"news:4475210b@linux">news:4475210b@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>Thanks for the call Deej. =
Thanks to=20
you I know what I have to do now.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Spend more money.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Ha!</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: =
5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"DJ" <<A=20
=
href=3D"mailto:animix_spam-this-ahole_@animas.net">animix_spam-this-ahole=
_@animas.net</A>>=20
wrote in message <A=20
href=3D"news:44750590@linux">news:44750590@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>
<DIV><FONT face=3DArial size=3D2>Tom, answers=20
below:</FONT></DIV></FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: =
5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Tom Bruhl" <<A=20
=
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> wrote=20
in message <A=20
=
href=3D"news:44750054$1@linux">news:44750054$1@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>Well I just read that the =
Cubase plugin=20
is a SMPTE generator not a</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>reader. From what I =
can tell ADAT=20
sync (from Paris using XP?)</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>or MTC are my only=20
options.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I figured I'd end up with =
the RME HDSP=20
5692 card in the end.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><EM><STRONG>Resistance is=20
futile</STRONG></EM></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Will Paris using XP be able =
to send=20
ADAT sync to this card successfully?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Yes.=20
always</EM></STRONG></FONT></DIV>
<DIV><STRONG><EM><FONT face=3DArial=20
size=3D2></FONT></EM></STRONG> </DIV>
<DIV><FONT face=3DArial size=3D2>I understand the Paris ADAT =
sync using=20
XP doesn't work with an ADAT tape machine</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>but will it work with the =
RME this=20
way?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Yes. It will =
work. I've=20
personally done it with Paris on XP. =
</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>If so then I guess I have =
to buy that=20
RME card now. Are there any other cards that =
</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>are better for this=20
application? </FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Do you really =
need 24 ADAT=20
I/O? The HDSP 9632 should work well for this. Also the HDSP =
PCI with=20
a Multiface (v1) or Digiface breakout box will work. I =
have=20
synced the Multiface (v1) to Paris with no problems. =
Multiface=20
v2 doesn't have ADAT input so avoid that=20
one.</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I do need the MIDI, ADAT =
and MTC or=20
ADAT sync anyway.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I didn't want to add a MIDI =
card to my=20
Paris comp if it isn't necessary.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I am using the GenX WC now=20
too.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>If you decide =
on an=20
HDSP 9632 and will need to use it as a standalone (not =
synced=20
to Paris ADAT), you will need to buy the WC daughtercard for =
it.</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Thanks,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Be usre that =
any RME=20
interface you buy has the *HDSP* designation.....not the =
"Digi"=20
designation. The "Digi" series is older and does not sync =
reliably=20
to Paris ADAT.</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><EM>Good=20
luck,</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial=20
size=3D2><STRONG><EM></EM></STRONG></FONT> </DIV >
<DIV><FONT face=3DArial=20
size=3D2><STRONG><EM>Deej</EM></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: =
5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Tom Bruhl" <<A=20
=
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=20
wrote in message <A=20
=
href=3D"news:4474ed25@linux">news:4474ed25@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>I think there's some kind =
of plugin=20
that needs to be added that</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>may not be stock with the =
program. I want to send SMPTE from</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Paris to Cubase so they =
can=20
lock.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Anyone here familiar with =
the=20
procedure? The Steinberg forum isn't letting =
me</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>search but I think I read =
the answer=20
there at one time in the past.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>As always thanks for your =
help.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to =
fight=20
spam, and you?<BR><A=20
=
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A> </FONT></DIV></BLOCKQUOTE ></BLOCKQUOTE></BLOCK=
QUOTE></BLOCKQUOTE></BLOCKQUOTE></BLOCKQUOTE></BLOCKQUOTE ></BODY></HTML>
------=_NextPart_000_00B8_01C680AB.A0C81D30--
|
|
|
Goto Forum:
Current Time: Tue Dec 24 09:41:17 PST 2024
Total time taken to generate the page: 0.01920 seconds
|